Cobalt distribution and speciation: effect of aging, intermittent submergence, in situ rice roots

The speciation and distribution of Co in soils is poorly understood. This study was conducted using x-ray absorption spectroscopy (XAS) techniques to examine the influence of soluble cobalt in the +2 oxidation state (Co[II]) aging, submergence-dried cycling, and the presence of in vivo rice roots on the speciation and distribution of added Co(II) in soils. In the aging and submerged-dried cycling studies, Co was found to be associated with Mn oxide fraction (23 to 100% of total Co) and Fe oxide fractions (0 to 77% of total Co) of the soils as either Co(II) species or a mixed Co(II), and Co in the +3 oxidation state (Co[III]) species. The surface speciation of Co in the Mn oxide fraction suggests an innersphere complex was present and the speciation of Co in the Fe oxide fraction was an innersphere surface complex. The in vivo root box experiments showed similar Co speciation in the Mn oxide fraction (13 to 76% of total Co) as the aging and submerged-dried cycling studies. However, the Fe oxide fraction of the soil was unimportant in Co retention. A significant amount (24 to 87% of total Co) of the Co in root box treatments was identified as a Co precipitate. The importance of this finding is that in the presence of rice roots, the Co is redistributed to a Co precipitate. This work confirmed earlier macroscopic work that Mn oxides are important in the sequestration of Co in soils and the influence of roots needs to be taken into account when addressing Co speciation. The information gained from this study will be used to improve models to predict the lability and hence the availability of Co in terrestrial environments.     

Reduction of arsenic uptake by lettuce with ferrous sulfate applied to contaminated soil

Soil contamination by arsenic (As) presents a hazard in many countries and there is a need for techniques to minimize As uptake by plants. A proposed in situ remediation method was tested by growing lettuce (Lactuca sativa L. cv. Kermit) in a greenhouse pot experiment on soil that contained 577 mg As kg(-1), taken from a former As smelter site. All combinations of iron (Fe) oxides, at concentrations of 0.00, 0.22, 0.54, and 1.09% (w/w), and lime, at concentrations of 0.00, 0.27, 0.68, and 1.36% (w/w), were tested in a factorial design. To create the treatments, field-moist soil, commercial-grade FeSO4, and ground agricultural lime were mixed and stored for one week, allowing Fe oxides to precipitate. Iron oxides gave highly significant (P < 0.001) reductions in lettuce As concentrations, down to 11% of the lettuce As concentration for untreated soil. For the Fe oxides and lime treatment combinations where soil pH was maintained nearly constant, the lettuce As concentration declined in an exponential relationship with increasing FeSO4 application rate and lettuce yield was almost unchanged. Iron oxides applied at a concentration of 1.09% did not give significantly lower lettuce As concentrations than the 0.54% treatment. Simultaneous addition of lime with FeSO4, was essential. Ferrous sulfate with insufficient lime lowered soil pH and caused mobilization of Al, Ba, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr, and Zn. At the highest Fe oxide to lime ratios, Mn toxicity caused severe yield loss.     

DISTRIBUTION AND GRAIN-SIZE PARTITIONING OF METALS IN BOVFOM SEDIMENTS OF AN EXPERIMENTALLY ACIDIFIED WISCONSIN LAKE1

ABSTRACT: A study of concentrations and distribution of major and trace elements in surficial bottom sediments of Little Rock Lake in northern Wisconsin included examination of spatial variation and grain-size effects. No significant differences with respect to metal distribution in sediments were observed between the two basins of the lake, despite the experimental acidification of one of the basins from pH 6.1 to 4.6. The concentrations of most elements in the lake sediments were generally similar to soil concentrations in the area and were well below sediment quality criteria. Two exceptions were lead and zinc, whose concentrations in July 1990 exceeded the criteria of 50 μg/g and 100 μg/g, respectively, in both littoral and pelagic sediments. Concentrations of some elements, particularly Cu, Pb, and Zn, increased along transects from nearshore to midlake, following a similar gradient of sedimentary organic carbon. In contrast, Mn, Fe, and alkali/alkaline-earth elements were at maximum concentrations in nearshore sediments. These elements are less likely to partition to organic particles, and their distribution is more dependent on mineralogical composition, grain size, and other factors. Element concentrations varied among different sediment grain-size fractions, although a simple inverse relation to grain size was not observed. Fe, Mn, Pb, and Zn were more concentrated in a grain-size range 20–60 tm than in either the very fine or the coarse fractions, possibly because of the aggregation of smaller particles cemented together by organic and Fe/Mn hydrous-oxide coatings.     

Temporal variability in physical speciation of metals during a winter rain-on-snow event

Particulate matter in urban rivers transports a significant fraction of pollutants, changes rapidly during storm events, and is difficult to characterize. In this study, the physical speciation of trace metals and organic C in an urban river and upstream headwaters site in Torrington, CT, were measured during a winter rain-on-snow event. In addition, a selective fractionation scheme, using membrane and tangential-flow ultrafiltration methods to separate suspended particulate matter into sand, silt, clay, and colloid fractions, was evaluated based on the appropriateness of the chosen size categories. During peak runoff at the urban river site, total-recoverable concentrations of the metals Cu and Pb increased 6- and 13-fold to 16.9 and 9.5 microg L(-1), respectively, compared with baseflow concentrations. Concentrations of Cu and Pb reached only 0.9 and 0.86 microg L(-1) at the headwaters site. For the measured storm event, the majority of metals were transported by the urban river in association with coarse silt (20-80 microm particle diam.) during peak runoff. During peak runoff at the urban site, organic C associated with the large colloid fraction (0.1-1.0 microm) increased from 5% (at baseflow) to 54% of the total C in transport, whereas dissolved organic C and that associated with smaller colloids decreased from 91.5% (at baseflow) to 41% of the total. Other elements that were monitored as part of the study were Na, K, Ca, Mg, Fe, Mn, Al, Cd, Cl-, NO3(-), and SO4(2-). The chosen fractionation scheme was useful to characterize pollutant transport during this event, but further testing should be undertaken to determine the most appropriate size range categories, and to ensure that the sizes measured are comparable to those used in other studies.     

Conditions affecting the release of phosphorus from surface lake sediments

Laboratory studies were conducted to determine the effect of pH and redox conditions, as well as the effect of Fe, Mn, Ca, Al, and organic matter, on the release of ortho-phosphates in lake sediments taken from Lakes Koronia and Volvi (Northern Greece). Results were evaluated in combination with experiments to determine P fractionation in the sediment. The study revealed the major effect of redox potential and pH on the release of P from lake sediments. Both lakes showed increased release rates under reductive conditions and high pH values. The fractionation experiments revealed increased mobility of the reductive P fraction as well as of the NaOH-P fraction, indicating participation of both fractions in the overall release of sediment-bound P, depending on the prevailing environmental conditions. The results were assessed in combination with the release patterns of Fe, Mn, Ca, Al, and organic matter, enabling the identification of more specific processes of P release for each lake. The basic release patterns included the redox induced reductive dissolution of P-bearing metal oxides and the competitive exchange of phosphate anions with OH- at high pH values. The formation of an oxidized surface microlayer under oxic conditions acted as a protective film, preventing further P release from the sediments of Lake Volvi, while sediments from Lake Koronia exhibited a continuous and increased tendency to release P under various physicochemical conditions, acting as a constant source of internal P loading.     

Chemical-looping combustion using syngas as fuel

Chemical-looping combustion (CLC) is a combustion technology where an oxygen carrier is used to transfer oxygen from the combustion air to the fuel, avoiding direct contact between air and fuel. Thus, CO₂ and H₂O are inherently separated from the rest of the flue gases and the carbon dioxide can be obtained in a pure form without the use of an energy intensive air separation unit. The paper presents results from a 3-year project devoted to developing the CLC technology for use with syngas from coal gasification. The project has focused on: (i) the development of oxygen carrier particles, (ii) establishing a reactor design and feasible operating conditions and (iii) construction and operation of a continuously working hot reactor. Approximately, 300 different oxygen carriers based on oxides of the metals Ni, Fe, Mn and Cu were investigated with respect to parameters, which are important in a CLC system, and from these investigations, several particles were found to possess suitable qualities as oxygen carriers. Several cold-model prototypes of CLC based on interconnected fluidized bed reactors were tested, and from these tests a hot prototype CLC reactor system was constructed and operated successfully using three carriers based on Ni, Fe and Mn developed within the project. The particles were used for 30–70 h with combustion, but were circulated under hot conditions for 60–150 h.     

Trace metals in river bed sediments: An assessment of their partitioning and bioavailability by using multivariate exploratory analysis

In this study, river bed sediments were submitted to a BCR sequential extraction, together with three bioavailability tests: a weak acid elutriate (HCl), a physiologically based extraction test (PBET) and a toxicity characteristic leaching procedure (TCLP). The most remarkable features of the BCR procedure were: i) Mn and Zn showed the highest proportion of the F1 exchangeable fraction; ii) in addition to Fe, Pb and Zn were the metals with the higher percentages in the F2 reducible fraction; iii) Fe and Cu were the elements with the highest proportion of the F3 oxidizable fraction; iv) the application of Principal Component Analysis to the metals in each of the three fractions did not show clear associations between metals and sediment components considered as metal scavengers, v) considering the sum of the three BCR fractions, the elements showed a decreasing availability of: Fe > Pb > Zn > Cu > Mn > Ni > Cr. The single extractions followed a decreasing extractability order of: HCl > PBET > TCLP and they were far from the extractability deduced from the sum of fractions in the BCR extraction.     

Characteristics of slag, fly ash and deposited particles during melting of dewatered sewage sludge in a pilot plant

This study examines slag, fly ash, and deposited particles during melting of dewatered sewage sludge in a pilot plant. In addition, the chemical composition of particles in flue gas was simulated using a thermodynamics program, namely FACTSage 5.2. The results showed that the main components of slag were Al, Fe, Ca, P and Si; the minor components were Na, K, Mg, Cu, and Zn. The main chemical compound of slag was Ca4(Mg,Fe)5(PO4)6. For fly ash particles, heavy metals with the highest concentrations were in the order of Zn and As, Pb, Cu, and Cd, respectively. For non-heavy metals, Al, Fe and P were also found in significant amounts. The majority of deposited particles were composed of elements of Zn, P, S, Na, Fe, Al, Si, and Ca and such chemical compounds as Zn3(PO4)2, AlPO4, FePO4 and Fe(OH)3 while the minority consisted of elements of As, Cu, and Pb. Moreover, the compositions of deposited particles in each chamber differed due to different flue gas temperatures inside. In the secondary chamber at 760 degrees C, the amounts of Fe and Al were higher than Zn, whereas, in the other chambers (600-400 degrees C), the amount of Zn was higher. In other words, at the lower temperature the deposition of Zn was higher than the deposition of Fe and Al. In the water cooling section, volatile elements (i.e. Zn, As, Cu, Pb) were found in the highest concentrations due to a big difference in temperature between the wall surface and flue gas. From the simulation results, most of the elements in the gas phase were found to be chloride compounds, whereas those in the solid phase were in the form of oxide, sulfate, and phosphate compounds.     

Solubility of antimony and other elements in samples taken from shooting ranges

The aim of this study was to determine whether or not Sb and other elements (Ni, Cu, Bi, Tl, and Hg) originating from Pb alloy (2-5 wt. % Sb) bullets become more soluble as a result of weathering and what mechanisms possibly control their solubility. Samples were taken from bank material behind the targets at seven Swiss shooting ranges. The samples were dried, sieved, analyzed, and subjected to leaching experiments. Total average concentrations of Sb ranged from 0.5 to 13.8 g kg(-1). In the leaching experiments, Sb was almost exclusively present in solution as the oxidized species Sb(V) in concentrations of up to 5 mg L(-1). The Ca mineral Ca[Sb(OH)6]2 is suggested to control dissolved Sb(V) concentrations in soils at high concentrations. Oxalate extractions suggested that approximately 50% of Sb [predominantly Sb(V)] in the <0.5-mm fraction was adsorbed to Fe (hydr)oxides and possibly other minerals, such as calcite, that are soluble at pH 2. However, it is possible that only a fraction of the oxalate-extractable Sb(V) is reversibly bound to mineral surfaces. It was concluded that the release of Sb is significant and considerably higher than the other elements under investigation and that the mechanisms controlling Sb mobility should be further investigated.     

Prediction of trace element mobility in contaminated soils by sequential extraction

The modified three-step sequential extraction procedure proposed by the Community Bureau of Reference (or Bureau Communautaire de Reference, BCR) was used to predict trace element mobility in soils affected by an accidental spill comprising arsenopyrite- and heavy metal-enriched sludge particles and acid waste waters. The procedure was used to obtain the distribution of both the major (Al, Ca, Fe, Mg, and Mn) and trace elements (As, Bi, Cd, Cu, Pb, Tl, and Zn) in 13 soils of contrasting properties with various levels of contamination and in the sludge itself. The distributions of the major elements enabled us to confirm the main soil fractions solubilized in each of the three steps, and, in turn, to detect the presence of pyritic sludge particles by the high Fe extractability obtained in the third step. Cadmium was identified as being the most mobile of the elements, having the highest extractability in the first step, followed by Zn and Cu, Lead, Tl, Bi, and As were shown to be poorly mobile or nonmobile. In the case of some of the trace elements, the residual fractions decreased at higher levels of contamination, which was attributed to the anthropogenic contributions to the polluted samples. Comparison with soil-plant transfer factors, calculated in plants growing in the affected area, indicated that a relative sequence of trace element mobility was well predicted from data of the first step.     

Solubilization of manganese and trace metals in soils affected by acid mine runoff

Manganese solubility has become a primary concern in the soils and water supplies in the Alamosa River basin, Colorado due to both crop toxicity problems and concentrations that exceed water quality standards. Some of the land in this region has received inputs of acid and trace metals as a result of irrigation with water affected by acid mine drainage and naturally occurring acid mineral seeps. The release of Mn, Zn, Ni, and Cu following saturation with water was studied in four soils from the Alamosa River basin. Redox potentials decreased to values adequate for dissolution of Mn oxides within 24 h following saturation. Soluble Mn concentrations were increased to levels exceeding water quality standards within 84 h. Soluble concentrations of Zn and Ni correlated positively with Mn following reduction for all four soils studied. The correlation between Cu and Mn was significant for only one of the soils studied. The soluble concentrations of Zn and Ni were greater than predicted based on the content of each of these metals in the Mn oxide fraction only. Increases in total electrolyte concentration during reduction indicate that this may be the result of displacement of exchangeable metals by Mn following reductive dissolution of Mn oxides.     

The desorption of antimony(V) from sediments, hydrous oxides, and clay minerals by carbonate, phosphate, sulfate, nitrate, and chloride

The desorption of antimony, Sb(V), from two sediment samples by phosphate, carbonate, sulfate, chloride, and nitrate at pH 8 was examined. One highly contaminated sediment sample was taken from an Sb mine (Goesdorf, Luxembourg); the other sample was the certified reference material PACS-2 (marine sediment). Phosphate was found to have a strong mobilizing ability, whereas that of carbonate was in general weaker. For comparison, and to understand better the possible importance of individual components of the sediments, desorption experiments were performed on pure phases (i.e., hydrous oxides of Fe, Mn, and Al) and the clay minerals kaolinite and montmorillonite. In the cases of hydrous metal oxides, Sb(V) was most effectively desorbed by phosphate, followed by carbonate. Phosphate also desorbed Sb(V) from the clay minerals, whereas carbonate had no effect. The pH dependence of adsorption of Sb(V) in the absence and presence of carbonate revealed that adsorption densities were higher (except in the case of montmorillonite) in the absence of carbonate, suggesting a competition between carbonate and [Sb(OH)] for surface sites generally and a lowering of surface charge in the case of hydrous aluminum oxide. The observations are unlikely to be due to ionic strength effects because activity coefficients in the blank and spiked solutions differ by <4%. Desorption experiments on sediments with varying concentrations of phosphate and carbonate demonstrated that at environmentally relevant concentrations, desorption by phosphate is negligible, whereas the effect of carbonate is not. Sulfate, chloride, and nitrate generally had little effect. The proportion of Sb desorbed in blank experiments coincides with that mobilized in the first fraction of the Bureau Communautaire de Référence (BCR) sequential extraction (easily exchangeable and carbonate-bound fraction).     

Colloid mobilization and arsenite transport in soil columns: effect of ionic strength

Colloid generation and transport in soils is of significance because of suspected colloid-facilitated transport of contaminants to the groundwater. In this study, colloid mobilization and its effect on the transport of arsenite [As(III)] were investigated in Olivier (fine-silty, mixed, active, thermic Aquic Fraglossudalfs) and Windsor (mixed, mesic typic Udipsamments) soil columns. Input solution of 10 mg L(-1) As(III) in 0.01 M NaCl was applied to water-saturated columns, and followed by leaching with deionized water (DIW). Flow interruptions were performed during the As(III) input and DIW leaching phases. Turbidity, electrical conductivity (EC), and pH of column effluents were monitored with time. Total and dissolved concentrations of As, Fe, and Al were analyzed. Effluent results demonstrated that colloid-facilitated transport contributed little to arsenic movement when the solution ionic strength was maintained constant. Mobilization of colloidal amorphous material and enhanced transport of As(III) were observed as a result of changes in ionic strength of the input solution. The peak of colloid generation coincided with peak concentrations of Fe, suggesting mobilization of Fe oxides and facilitated transport of As(III) adsorbed on oxide surfaces. Colloid mobilization was enhanced due to flow interruption in the Olivier column, which suggests slow dissociation of aggregated colloidal particles. Moreover, effluent results indicate significant effect of organic matter in stabilizing aggregates of colloidal particles.     

Does control of soil erosion inhibit aquatic eutrophication?

Much of the phosphorus (P) from erosive soils is transported to water bodies together with eroded soil. Studies clarifying the impact of soil erosion on eutrophication have sought largely to quantify the reserves of P in soil particles that can be desorbed in different types of receiving waters. Aquatic microbiology has revealed that the cycling of P is coupled to the availability of common electron acceptors, Fe oxides and SO?, through anaerobic mineralization in sediments. Eroded soil is also rich in Fe oxides, and their effect on the coupled cycling of C, Fe, S, and P has been neglected in eutrophication research. Soil erosion, and its control, should therefore be studied by considering not only the processes occurring in the water phase but also those taking place after the soil particles have settled to the bottom. We propose that in SO?-rich systems, Fe oxides transported by eroded soil may promote Fe cycling, inhibit microbial SO? reduction and maintain the ability of sediment to retain P. We discuss the mechanisms through which eroded soil may affect benthic mineralization processes and the manner in which soil erosion may contribute to or counteract eutrophication.     

Mineralogical characteristics and transformations during long-term operation of a zerovalent iron reactive barrier

Design and operation of Fe0 permeable reactive barriers (PRBs) can be improved by understanding the long-term mineralogical transformations that occur within PRBs. Changes in mineral precipitates, cementation, and corrosion of Fe0 filings within an in situ pilot-scale PRB were examined after the first 30 months of operation and compared with results of a previous study of the PRB conducted 15 months earlier using X-ray diffraction and scanning electron microscopy employing energy dispersive X-ray and backscatter electron analyses. Iron (oxy)hydroxides, aragonite, and maghemite and/or magnetite occurred throughout the cores collected 30 mo after installation. Goethite, lepidocrocite, mackinawite, aragonite, calcite, and siderite were associated with oxidized and cemented areas, while green rusts were detected in more reduced zones. Basic differences from our last detailed investigation include (i) mackinawite crystallized from amorphous FeS, (ii) aragonite transformed into calcite, (iii) akaganeite transformed to goethite and lepidocrocite, (iv) iron (oxy)hydroxides and calcium and iron carbonate minerals increased, (v) cementation was greater in the more recent study, and (vi) oxidation, corrosion, and disintegration of Fe0 filings were greater, especially in cemented areas, in the more recent study. If the degree of corrosion and cementation that was observed from 15 to 30 mo after installation continues, certain portions of the PRB (i.e., up-gradient entrance of the ground water to the Fe0 section of the PRB) may last less than five more years, thus reducing the effectiveness of the PRB to mitigate contaminants.     

Responses to iron limitation in Hordeum vulgare L. as affected by the atmospheric CO2 concentration

Elevated atmospheric CO2 treatments stimulated biomass production in Fe-sufficient and Fe-deficient barley plants, both in hydroponics and in soil culture. Root/shoot biomass ratio was increased in severely Fe-deficient plants grown in hydroponics but not under moderate Fe limitation in soil culture. Significantly increased biomass production in high CO2 treatments, even under severe Fe deficiency in hydroponic culture, indicates an improved internal Fe utilization. Iron deficiency-induced secretion of PS in 0.5 to 2.5 cm sub-apical root zones was increased by 74% in response to elevated CO2 treatments of barley plants in hydroponics but no PS were detectable in root exudates collected from soil-grown plants. This may be attributed to suppression of PS release by internal Fe concentrations above the critical level for Fe deficiency, determined at final harvest for soil-grown barley plants, even without additional Fe supply. However, extremely low concentrations of easily plant-available Fe in the investigated soil and low Fe seed reserves suggest a contribution of PS-mediated Fe mobilization from sparingly soluble Fe sources to Fe acquisition of the soil-grown barley plants during the preceding culture period. Higher Fe contents in shoots (+52%) of plants grown in soil culture without Fe supply under elevated atmospheric CO2 concentrations may indicate an increased efficiency for Fe acquisition. No significant influence on diversity and function of rhizosphere-bacterial communities was detectable in the outer rhizosphere soil (0-3 mm distance from the root surface) by DGGE of 16S rRNA gene fragments and analysis of marker enzyme activities for C-, N-, and P-cycles.     

湿式空气非均相催化氧化处理有机废水中难降解有机物的研究

湿式空气催化氧化是曩为经济的环境友好型高级氧化技术之一,在处理有机废水中难降解有机物方面极具前景.为提高氧化效率,钌（Ru）、铑（Rh）、铂（Pt）、钯（Pd）等贵金属及铜（Cu）、铈（Ce）、锰（Mn）、铁（Fe）、镍（Ni）、铝（Al）、铬（Cr）及钴（Co）等金属氧化物等常作为非均相催化剂应用到湿式空气催化氧化体系中.本文对非均相催化湿式空气氧化处理有机废水中难降解有机物的非均相催化剂、工艺条件及反应机理进行了探讨,最后指出了催化剂的失效、解决方法及技术发展方向.     

Sorption and desorption of cadmium by different fractions of biosolids-amended soils

To evaluate the importance of both the inorganic and organic fractions in biosolids on Cd chemistry, a series of Cd sorption and desorption batch experiments (at pH 5.5) were conducted on different fractions of soils from a long-term field experimental site. The slope of the Cd sorption isotherm increased with rate of biosolids and was different for the different biosolids. Removal of organic carbon (OC) reduced the slope of the Cd sorption isotherm but did not account for the observed differences between biosolids-amended soils and a control soil, indicating that the increased adsorption associated with biosolids application was not limited to the increased OC from the addition of biosolids. Removal of both OC and Fe/Mn further reduced the slopes of Cd sorption isotherms and the sorption isotherm of the biosolids-amended soil was the same as that of the control, indicating both OC and Fe/Mn fractions added by the biosolids were important to the increased sorption observed for the biosolids-amended soil samples. Desorption experiments failed to remove from 60 to 90% of the sorbed Cd. This "apparent hysteresis" was higher for biosolids-amended soil than the control soil. Removal of both OC and Fe/Mn fractions was more effective in removing the observed differences between the biosolids-amended soil and the control than either alone. Results show that Cd added to biosolids-amended soil behaves differently than Cd added to soils without biosolids and support the hypothesis that the addition of Fe and Mn in the biosolids increased the retention of Cd in biosolids-amended soils.     

三峡库区土壤中有效态微量元素含量的区划

本文建立了三峡库区土壤中有效态微量元素含量的区划原则。根据确立的有效态微量元素含量丰缺的指标，运用等值线图法，采用微机处理，最后将库区划分为八个土壤亚区。     

TROPHIC LEVEL ACCUMULATION OF HEAVY METALS IN A COAL ASH BASIN DRAINAGE SYSTEM1

ABSTRACT: The uptake of ten chemical elements was measured in water, sediment, fly ash, and the major biotic components of an ash basin drainage system. The biota tested represent several trophic levels observed in the settling basin and receiving swamp of the system. Concentrations were measured by neutron activation (NAA) in the major biotic groups including aquatic bacteria, algae, macrophytes, midges, dragonflies, crayfish, tadpoles, and fish. Only three elements (Cu, Zn, Cd) were more highly concentrated in water from a nearby unpolluted stream than in the fly ash effluent. Sediment concentrations of all elements were highest in the ash drainage system with Al and Fe being consistently highest. Among the biota, Hydrodictyon sp. and Lemna perpusilla had the highest concentrations of Al and Fe while other macrophytes were the major accumulators of Mn and Ba. Invertebrates generally concentrated high amounts of Cu and Zn although Cd and Hg were accumulated most by crayfish. Selenium was selectively concentrated by bacteria, crayfish (Procambarus sp.) and mosquitofish (Gambusia afflnis). Consequences of elemental concentrations in sediment and in specific trophic level groups are discussed.