Assessment of the status of work zone air environment due to opencast coal mining

In India coal production will have to be increased to meat theenergy demand at a very high rate. By 2000 AD the coolproduction from opencast (O/C) mining will rise to 250 Mt. whichwill be about 70% of the total coal production. The increasing trend of O/C mining leads to cause air pollution problem. A surveywas conducted to assess the status of work zone air envirnmentdue to opencast coal mining in Jharia Coalfield. Keeping in viewof place of dust generation air quality monitoring stations wereselected. Methodology adapted for sampling and analysis of airpollutants have been described. Four season data revealed thatmaximum concentration of SPM was observed at dragline sectionand the next high concentration was at haul roads. At all thelocations SPM and RPM concentrations exceeded the permissiblelimits specified by Indian Pollution Control Board. Shift wiseand location wise analysis for getting higher concentration ofSO₂ and NO_x have been discussed. Wind velocity anddirections, mixing heights, ventilation coefficient of the areahave been analyzed. Huge dust generation creates vision problemto HEMM operators. The methodology adopted may be utilised onindustrial scale for various sites.     

Spatial and temporal variations of SPM, RPM, SO2 and NOx concentrations in an opencast coal mining area

A study for assessment and management of air quality was carried out in the Ib Valley area of the Ib Valley coalfield in Orissa state, India. The 24 h average concentrations of suspended particulate matter (SPM), respirable particulate matter (RPM), sulfur dioxide (SO(2)) and oxides of nitrogen (NO(x)) were determined at regular intervals throughout one year at twelve monitoring stations in residential areas and six monitoring stations in mining/industrial areas. The 24 h average SPM and RPM concentrations were 124.6-390.3 microg m(-3) and 25.9-119.9 microg m(-3) in residential areas, and were 146.3-845.2 microg m(-3) and 45.5-290.5 microg m(-3) in industrial areas. During the study period, 24 h and annual average SPM and RPM concentrations exceeded the respective standards set in the Indian national ambient air quality standard (NAAQS) protocol as well as USEPA, EU, WHO and World Bank standards at most of the residential and industrial areas. However, concentrations of SO(2)(annual average: 24.6-36.1 microg m(-3) and 24 h average: 17.0-46.3 microg m(-3)) and NO(x)(annual average: 23.6-40.9 microg m(-3) and 24 h average: 18.3-53.6 microg m(-3)) were well within the prescribed limit of the NAAQS and international standards in both residential and industrial areas. The temporal variations of SPM and RPM fitted polynomial trends well and on average in the mining area 31.91% of the SPM was RPM. The linear regression correlation coefficients between SPM and RPM and between NO(x) and SO(2) were 0.94 (+/-0.04) and 0.66 (+/-0.10), respectively. The optimum interpolation technique, kriging, determined that maximal concentrations of SPM and RPM occurred within the mining site. Highest concentrations of particulate matter were observed during the winter season followed by summer, autumn and rainy seasons. An action plan is formulated for effective control of air pollution at source, and mitigative measures should include implementation of green belts around the sensitive areas where the concentration of air pollutants exceeds the standard limit.     

Assessment of respirable dust exposures in an opencast coal mine

All major opencast mining activities produce dust. The major operations that produce dust are drilling, blasting, loading, unloading, and transporting. Dust not only deteriorates the environmental air quality in and around the mining site but also creates serious health hazards. Therefore, assessment of dust levels that arise from various opencast mining operations is required to prevent and minimize the health risks. To achieve this objective, an opencast coal mining area was selected to generate site-specific emission data and collect respirable dust measurement samples. The study covered various mining activities in different locations including overburden loading, stock yard, coal loading, drilling, and coal handling plant. The dust levels were examined to assess miners' exposure to respirable dust in each of the opencast mining areas from 1994 to 2005. The data obtained from the dust measurement studies were evaluated by using analysis of variance (ANOVA) and the Tukey-Kramer procedure. The analyses were performed by using Minitab 14 statistical software. It was concluded that, drilling operations produce higher dust concentration levels and thus, drill operators may have higher incidence of respiratory disorders related to exposure to dust in their work environment.     

Fractionation of traffic-emitted Ce, La and Zr in road dusts

The introduction of catalytic converters has led to a new environmental problem since catalysts emit platinum group elements (PGEs) which are among the least distributed elements in nature. Along with PGEs the vehicle exhaust catalysts contain also a number of stabilizers, commonly oxides of rare earth elements and alkaline earth elements such as Ce, La and Zr. Since vehicular emission of these elements has received little attention so far this work attempts to offer insight into their distribution and fate in the environment by measuring their speciation in road dust samples collected along several highways in Germany and a city centre (Saarbrücken). Speciation of the elements (fractionation into associated mineralogical phases) was carried out via a conventional sequential extraction protocol and the complexing abilities of humic substances in the organic matter were investigated by selective extraction methods in combination with size segregation. For evaluation purposes soil samples spiked with catalytic converter material were analyzed, showing a much lower fraction of Ce, La and Zr mobilized in comparison to the road dust samples. It was found that the elements were effectively bound to humic substances in road dust with a preference for complexation with low molecular weight compounds (<1600 Da).     

State of rare earth elements in different environmental components in mining areas of China

China has relatively abundant rare earth elements (REEs) reserves and will continue to be one of the major producers of REEs for the world market in the foreseeable future. However, due to the large scale of mining and refining activities, large amounts of REEs have been released to the surrounding environment and caused harmful effects on local residents. This paper summarizes the data about the contents and translocation of REEs in soils, waters, atmosphere, and plants in REE mining areas of China and discusses the characteristics of their forms, distribution, fractionation, and influencing factors. Obviously high concentrations of REEs with active and bioavailable forms are observed in all environmental media. The mobility and bioavailability of REEs are enhanced. The distribution patterns of REEs in soils and water bodies are all in line with their parent rocks. Significant fractionation phenomenon among individual members of REEs was found in soil–plant systems. However, limited knowledge was available for REEs in atmosphere. More studies focusing on the behavior of REEs in ambient air of REE mining areas in China are highly suggested. In addition, systematic study on the translocation and circulation of REEs in various media in REEs mining areas and their health risk assessment should be carried out. Standard analytical methods of REEs in environments need to be established, and more specific guideline values of REEs in foods should also be developed.     

Assessment of metal pollution in urban road dusts from selected highways of the Greater Toronto Area in Canada

Over the last several decades, there has been increased attention on the heavy metal contamination associated with highways because of the associated health hazards and risks. Here, the results are reported of an analysis of the content of metals in roadside dust samples of selected major highways in the Greater Toronto Area of Ontario, Canada. The metals analysed are lead (Pb), zinc (Zn), cadmium (Cd), nickel (Ni), chromium (Cr), copper (Cu), manganese (Mn), calcium (Ca), potassium (K), magnesium (Mg) and iron (Fe). In the samples collected, the recorded mean concentrations (in parts per million) are as follows: Cd (0.51), Cu (162), Fe (40,052), Cr (197.9), K (9647.6), Mg (577.4), Ca (102,349), Zn (200.3), Mn (1202.2), Pb (182.8) and Ni (58.8). The mean concentrations for the analysed samples in the study area are almost all higher than the average natural background values for the corresponding metals. The geo-accumulation index of these metals in the roadside dust under study indicates that they are not contaminated with Cr, Mn and Ca; moderately contaminate with Cd and K; strongly contaminated with Fe and Mg; strongly to extremely contaminated with Ni and Pb; and extremely contaminated with Cu and Zn. The pollution load index (PLI) is used to relate pollution to highway conditions, and the results show that PLI values are slightly low at different samples collected from Highways 401 and 404 and high in many samples collected from Highway 400 and the Don Valley Parkway. Highway 400 exhibits the highest PLI values.     

Risk assessment due to intake of heavy metals through the ingestion of groundwater around two proposed uranium mining areas in Jharkhand,India

Heavy metal pollution of water resources can be apprehended in East Singhbhum region which is a highly mineralised zone with extensive mining of copper, uranium and other minerals. Ten groundwater samples were collected from each site and the heavy metal analysis was done by atomic absorption spectrophotometer. Analysis of the results of the study reveals that the concentration of iron, manganese, zinc, lead, copper and nickel in groundwater of Bagjata mining area ranged 0.06–5.3 mg l^− 1, 0.01–1.3 mg l^− 1, 0.02–8.2 mg l^− 1, 1.4–28.4 μg l^− 1, 0.78–20.0 μg l^− 1 and 1.05–20.1 μg l^− 1, respectively. In case of Banduhurang mining area, the range was 0.04–2.93 mg l^− 1, 0.02–1.1 mg l^− 1, 0.01–4.68 mg l^− 1, 1.04–33.21 μg l^− 1, 1.24–18.7 μg l^− 1 and 1.06–14.58 μg l^− 1, respectively. The heavy metals were found to be below the drinking water standards (IS:10500 1993) except iron (0.3 mg l^− 1) and manganese (0.1 mg l^− 1). The hazard quotients of the heavy metals for drinking water were below 1 posing no threat due to intake of water to the people for both the areas.     

Determination of Pb and Cd in road dusts over the period in which Pb was removed from petrol in the UK

It is commonly agreed that automobile exhaust has been the most important source of Pb pollution in urban areas, and that Cd may come from wear and tear of tyres. This study evaluates the fall in Pb concentrations in road dusts in Manchester as a consequence of the removal of Pb from petrol in January 2000. In the work presented here a slurry graphite furnace atomic absorption methodology for the determination of Pb and Cd in road dusts has been developed and is compared with an acid digestion method in terms of efficiency. The reproducibility and accuracy of the results obtained by acid digestion and the slurry method have been studied and a certified reference material CRM 038 was analysed to confirm the reliability of the proposed methods. Different factors were evaluated throughout this work including: (i) the effect of traffic density on Pb and Cd levels in road dust samples collected weekly during the period of May 1999 until September 2000; (ii) comparison between the Pb and Cd levels in a busy road and a residential street; (iii) the effect of distance from the source on Pb and Cd levels; The results of these experiments show a reduction in Pb levels over the sampling period. The relationship between road dust particle size and Pb and Cd concentration was also investigated in the 4-250 microns size range using the slurry method, showing that there is a relationship between metal concentration and particle size; the highest concentrations being for the smallest particle size.     

Magnetic properties of the road dusts from two parks in Wuhan city, China: implications for mapping urban environment

Magnetic parameters and heavy metal concentrations of road dusts collected from two parks with distance about 16 km in Wuhan city, China, were measured. The Guishan Park is circled by main roads with heavy traffic, and the Moshan Park is located on the downwind hills of steelworks and a power plant. Mean values of magnetic susceptibility (??) and saturation magnetization (M _s) of the dusts from the Moshan Park are 1.31 and 1.57 times those from the Guishan Park, respectively. Their magnetic mineralogy is dominated by pseudo-single domain magnetite; however, minor hematite was also identified in those from the Guishan Park. The dominant sources of non-natural magnetic particles and heavy metals were inferred as windblown emissions from the steelworks and the power plant for the Moshan Park, and road/railway traffics for the Guishan Park, respectively. Spatial variation in magnetic properties of road dust in the two parks and their different magnetic behavior propose that the magnetic measurements are sensitive to the different pollutant origins, as well as the urban environment, and that magnetic techniques have a high efficiency in mapping urban environment. Correlation between magnetic parameters and heavy metal concentrations is strongly site-specific: strong correlations were observed in the Moshan Park with correlation coefficients generally higher than 0.800, whereas correlations are poor in the Guishan Park. Therefore, it is strongly recommended that these relationships should be examined thoroughly before magnetic mapping.     

Status of air pollution caused by coal washery projects in India

The importance of coal washeries in India is growing as local coals have a high ash content. At present, there are 23 coal washeries with an annual rated input of 45 Million Tonnes. During the various operations in washeries, large amounts of dusts and gaseous pollutants are generated. Four coal washery projects were surveyed to study their air pollution characteristics. Air monitoring stations were set up in local industrial, residential and sensitive areas and air pollution samples were collected along with micro-meteorological data. Diurnal variations of SPM, SO₂ NO_x and CO are discussed. SPM concentrations were found to exceed the permissible limits at all locations. SO₂ and NO_x were also found to exceed the permissible limit in residential and sensitive areas. It was observed that about 50% of the dust particles were less than 10 µ in diameter. Benzene soluble matter in SPM ranged from 45–62%.     

Determination of Cu, Pb, Zn, Ni, Co, Cd, and Mn in road dusts of Samsun City

The dust samples from 52 different locations in central roads of Samsun City were collected in a study area of 40 km long for the purpose of determining total metal concentrations of dust samples by flame atomic absorption spectrometry. The concentrations of Cu, Pb, Co, Zn, Ni, Mn, and Cd were found in the ranges of 11.92–352.43, 5.47–223.57, 4.52–41.69, 40.85–173.10, 18.71–131.29, 133.19–179.13, and 0.02–6.16 mg/kg, respectively. The results showed that metal levels were higher around the industrial area than other locations. Principal component analysis was also carried out to ascertain the possible contributing factors towards the metal concentrations. Validation of the analytical results was tested by analysis of the BCR 032 Moroccan phosphate rock certified reference material.     

Soil gas radon analysis in some areas of Northern Punjab, India

The radon concentration levels in soil samples from 39 locations of Northern Punjab are measured using AlphaGUARD (PQ 2000 PRO Model) of Genitron instruments, Germany. The radon concentration in soil varies from 0.3 to 35.8 kBq/l. The minimum value of radon is observed in Talwandi Choudhrian and is maximum for Nushera Dhala. The soil gas radon is correlated with soil temperature, pressure, and humidity to observe the effect of these parameters on radon release. The soil gas radon values in the study area are compared with that obtained in groundwater. The results are also compared with the available radon data for other parts of Punjab and Himachal Pradesh.     

Attitudinal response towards road traffic noise in the industrial town of Asansol, India

The major objective of the investigation was to evaluate the road traffic noise and its likely impacts on the local community of Asansol city (West Bengal, India) by monitoring and modeling. The attitudinal response of local population due to existing vehicular noise is presented in the paper. Noise and Attitudinal Survey was conducted at 25 locations. A total of 869 individuals were surveyed. The relationship between traffic noise levels and annoyance was studied using correlation, linear and multiple linear regressions analysis. The average L(dn) value was 73.28 +/- 8.51 dB(A) (55.1-87.3); The Traffic Noise Index (TNI) was 80.62 +/- 15.88 dB(A) (49.4-115.8). The mean value of percent of population Highly Annoyed (%HA) due to road traffic noise was 26.50 +/- 3.37 (19.44-33.2), whereas the mean dissatisfaction score (MDS) was 2.96 +/- 0.90 (1.04-4.45). Annoyance modeling was also performed based on field data. It can be said that Noise values gives desirable annoyance predicting values in comparison to vehicular data.     

Accumulation and biological effects of metals in wild rats in mining areas of Zambia

The lead–zinc (Pb–Zn) mine in Kabwe City and the copper–cobalt (Cu–Co) mine in the Copperbelt Province are major mining areas in Zambia. To examine the effects of metal pollution on wildlife, wild black rats (Rattus rattus and Rattus tanezumi) were captured in Kabwe and Chingola (in the Copperbelt Province), and in Lusaka (a noncontaminated site). Wild black rats in Kabwe accumulated significantly higher concentrations of Pb and Cd in various organs than rats from Lusaka. In Chingola, significantly higher concentrations of Cu, Co, Pb, and Cd were accumulated in wild black rats than in rats from Lusaka. These results were in accordance with metal accumulation patterns in soil. From toxicological aspects, concentrations of Pb and Cd in rats were generally low. However, metallothionein-1 (MT-1) and metallothionein-2 (MT-2) mRNA expression levels in wild black rats from Kabwe were significantly higher than those in rats from Lusaka. A generalized linear model (GLM) showed that concentrations of Zn and Cu had positive effects on the MT-1 and MT-2 mRNA expression. These results suggest that wild black rats in Zambian mining sites were exposed to metals that accumulated in their organs, causing biological responses such as MT mRNA induction. GLM indicated that heme oxygenase-1 (HO-1) mRNA expression could be a marker for Cr exposure.     

Total mercury loadings in sediment from gold mining and conservation areas in Guyana

The Low Carbon Development Strategy proposed in June 2009 by the government of Guyana in response to the Reducing Emissions from Deforestation and Forest Degradation in Developing Countries program has triggered evaluation of forest-related activities, thereby acting as a catalyst for improvements in Guyana's small- to medium-scale gold mining industry. This has also shed light on areas committed to conservation, something that has also been handled by Non Governmental Organizations. This paper compares water quality and mercury concentrations in sediment from four main areas in Guyana, two that are heavily mined for gold using mercury amalgamation methods (Arakaka and Mahdia) and two that are considered conservation areas (Iwokrama and Konashen). Fifty-three sediment and soil mercury loadings ranged from 29 to 1,200 ng/g and averaged 215 ± 187 ng/g for all sites with similar averages in conservation and mining areas. Sediment loadings are within the range seen in French Guiana and Suriname, but conservation area samples had higher loadings than the corresponding uncontaminated baselines. Type of ore and location in the mining process seemed to influence mercury loadings. Mercury sediment loadings were slightly positively correlated with pH (correlation coefficient = 0.2; p value < 0.001) whereas no significant correlations were found with dissolved oxygen or turbidity.     

Ecological restoration of mined-out areas of dry tropical environment, India

The objective of the present study was to evince the long-term changes after natural revegetation and experimental revegetation of the coal mine spoils with respect to total plant biomass, available plant nutrients, nitrogen transformation and microbial biomass N (MBN) in dry tropical environment of India. Total plant biomass (above- and below-ground), plant available nitrogen, soil nitrogen mineralization and microbial biomass N (MBN) were studied for 2 years in 5 and 10 years old naturally vegetated and revegetated coal mine spoils, and dry tropical forest ecosystem of India. In forest ecosystem, the above ground biomass values ranged from 3,520 to 3,630 kg ha(-1) and belowground from 6,280 to 6,560 kg ha(-1). Plant available nitrogen ranged from 16.76 to 23.21 microg g(-1), net N-mineralization from 9.8 to 48.53 microg g(-1) month(-1) and MBN from 26.4 to 80.02 microg g(-1). In naturally revegetated mine spoil, the above ground biomass values ranged from 1,036 to 1,380 kg ha(-1) and belowground from 2,538 to 3,380 kg ha(-1). Plant available nitrogen ranged from 7.33-17.14 microg g(-1), net N-mineralization from 3.1 to 12.46 microg g(-1) month(-1) and MBN from 14.2 to 35.44 microg g(-1). In revegetated mine spoil, the above ground biomass values ranged from 1,224 to 1,678 kg ha(-1) and belowground from 2,870 to 4,130 kg ha(-1). Plant available nitrogen ranged from 9.4 to 18.83 microg g(-1), net N-mineralization from 4.2 to 16.2 microg g(-1) month(-1) and MBN from 21.6 to 42.6 microg g(-1). The mean plant biomass values in 5 and 10 years mine spoils was lower compared to forest ecosystem by 2.5 and 2 times, respectively. N-mineralization value in 5 year mine spoil was 3.5 times lower and in 10 years mine spoil 2 times lower compared to forest ecosystem. The MBN value was about 2 times lower in both 5 and 10 year mine spoils compared to native forest. MBN was positively related to the re-vegetation age of the mine spoil.     

Organochlorine pesticide residues in drinking water in the rural areas of Haryana,India

Drinking water samples collected from rural areas of three districts of Haryana during pre-monsoon and post-monsoon periods were analysed for the presence of organochlorine pesticide residues. The main source of drinking water in rural areas, i.e. groundwater in Ambala and Gurgaon districts and surface water supply in Hisar district, was found to be contaminated with isomers of HCH and endosulfan and metabolites of DDT, whereas dieldrin remained below detection limits. During the study period, the mean values observed for total HCH, DDT and endosulfan were 87.6, 848.2, and 27.4 ng/L and 99.8, 275.3 and 164.2 ng/L, respectively, for Ambala and Gurgaon districts. In the case of Hisar district, the values were 78.5, 115.9, and 53.0 ng/L, respectively. During the study period, 37% of the samples exceeded the total pesticide level of 500 ng/L indicated in the EECD directive for drinking water. Seasonal variations of pesticide residues were also observed during the study period.