共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
轮毂行业快速增长的同时,涂装车间作业排放的废气、废水、废渣、噪声,对环境造成了严重的污染。分析了轮毂行业涂装车间的环境污染状况,包括污染物的来源和种类,指出采用低污染材料、先进的生产设备,并优化生产工艺,是解决涂装“三废”问题的有效途径。 相似文献
3.
路中建 《环境保护与循环经济》2023,(6):27-29
汽车整车制造过程涉及表面处理、磷化处理、电泳涂装、喷漆等工艺,其生产过程中产生大量工业废水,废水成分复杂,p H波动范围较大,含石油类、涂料、漆料及重金属,污染物浓度也不相同,处理难度较大。对汽车整车制造行业废水产污环节进行分析并结合近年工程实践,汽车行业采用分流物化处理+合流生化处理工艺能达到相应的排放标准,符合国家环保要求。 相似文献
4.
本文通过常用的三类除磷药剂(铁盐、铝盐、钙盐)对金属涂装业中含磷废水处理效果的比较,选定该类型含磷废水的处理药剂为氯化钙;并讨论了药剂投加量及投加点的控制对于废水的除磷效果以及日后使用效果的影响. 相似文献
5.
含磷废水处理药剂的选定及讨论 总被引:1,自引:0,他引:1
本文通过常用的三类除磷药剂(铁盐、铝盐、钙盐)对金属涂装业中含磷废水处理效果的比较,选定该类型含磷废水的处理药剂为氯化钙;并讨论了药剂投加量及投加点的控制对于废水的除磷效果以及日后使用效果的影响。 相似文献
6.
广州某牛仔服饰洗漂厂采用水解酸化 接触氧化工艺处理牛仔洗漂废水,效果良好,技术可行,运行费用为0.63元/m<'3>.同时通过总结分析该工艺在同类型厂的运行情况,指出该工艺在处理同类型废水中的一些常见问题,并提出了相应的解决办法. 相似文献
7.
8.
调查分析了当前应用于中小型锅炉湿法除尘废水循环回用治理的技术,根据除尘废水循环回用后的水质和工艺特点,提出将除尘循环水净化同燃煤烟气脱硫除尘联合进行以及利用工业碱水,炉渣处理除尘废水的技术和工艺 相似文献
9.
10.
郭爽 《中国环境管理干部学院学报》2013,(2):66-68
啤酒废水具有水量大、污染物浓度高、易生物降解的特点。介绍了当前厌氧一好氧的组合工艺中UASB—SBR工艺、UASB—CASS工艺、EGSB一接触氧化工艺、USFB—AODT工艺、水解酸化-UASB—A/O工艺等主流工艺的原理和研究现状,以及射流曝气MBR5-艺、双极室联合工艺、光合细菌治理工艺等将来啤酒废水治理热点技术,并对啤酒废水治理技术的未来发展趋势进行了展望。 相似文献
11.
12.
ABSTRACTIn this paper, a wet chemical method is used to coat LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material by Li2O-2B2O3 (LBO) layer for Lithium-ion batteries (LIBs). For performance optimization, the effects of different contents (thicknesses) of LBO coating layers on NCM811 particle surface on the morphologies, structures, compositions, and electrochemical properties of the corresponding LIBs are studied using XRD, SEM, TEM, and electrochemical measurements. Coin LIBs are assembled with such coated NCM811 cathode materials for performance validation. Results show that LBO coating layer does not change the original lattice structure of the bulk material, it can only adhere to the surface of the bulk material. After coating, NCM811 shows a good crystallinity and the ordered layered structure. TEM images show that the thickness of LBO coating is increased with increasing LBO content, and that the appropriate LBO coating thickness and uniform coating state are conducive to the improvement of the electrochemical properties of NCM811 cathode materials. Particularly, NCM811 with LBO coating content of 1000 ppm shows the best performance compared to other coating contents. In this case, the coating thickness is relatively uniform, which is about 40~100 nm, giving a good first charge-discharge capacity of 214.1mAh/g, and a high Coulomb efficiency of 90.06%. After 50 cycles, the capacity retention rate of LIBs still keeps as high as 99.64%. Therefore, LBO coating can improve the performance of NCM811 and then the lithium-ion batteries. 相似文献
13.
14.
15.
采用TG研究溶剂型聚氨酯涂料废物在不同升温速率、N2气氛影响下的热解特性规律。升温速率取5,10,20,30℃/min;气氛取N2气氛(50 m L/min);实验温度范围为20~800℃。研究表明,随着升温速率的增大,涂料废物热解反应各阶段起始温度、终止温度、最大失重速率温度均向高温方向移动。在500℃时,涂料废物的热分解已基本完成。运用Kissinger法和Flynn-Wall-Ozawa法进行热解动力学分析,得到溶剂型聚氨酯涂料废物热解阶段的表观活化能为196.053 3 kJ/mol。 相似文献
16.
Naveenprabhu Venkateswaran Naveen Subbaiyan Gopirajan Punniyakotti Varadharajan Suresh Vellingiri Abdul Rab Asary Jitendra Mohan Giri Pitchandi Petchimuthu 《环境质量管理》2023,33(1):293-301
The condenser is a piece of equipment used to effectively transfer heat from water to the environment. The fin and tube condenser is the most commonly used in commercial applications. The improved performance of heat transfer in the fin and tube condenser is a significant area of study all over the world because optimizing the efficiency of heat transfer in the condenser will contribute to enhancing the effectiveness of system performance. The vapor deposition, plasma spray, and thermal spray techniques are being used, and it is determined that a heat transfer enhancing coating improves condenser performance. This review discusses the nanomaterial coating over the fin and tube condenser in detail. The various nanomaterial coatings with various propositions and coating methods had been discussed with the evidence of previous researchers. At a 50-degree inclination angle on the condensate plate, the condensate over the coating surface increases by more than 30%. The thermal properties of the working fluid are improved over the condenser, and the overall effectiveness of the condenser is increased by approximately 40% over the non-coated condenser. A 1% volumetric concentration of Nanoparticles in the coated material achieves a maximum efficiency increase of 78.7%. 相似文献
17.
典型大气环境玻璃钢天线罩聚氨酯涂层工艺老化行为研究 总被引:1,自引:0,他引:1
通过南海海洋大气环境、海南万宁湿热乡村大气环境、西藏拉萨高原大气环境户外大气暴露对玻璃钢基灭线罩聚氨酯涂层工艺进行了老化试验,运用光泽、颜色、粉化率、SEM等手段测试了涂层在户外大气暴露的性能变化和表面形貌,并进行对比分析。结果表明,在相同大气环境中,工艺玻璃钢板/雷达罩底漆/浅灰航天聚氨酯涂层耐候性能优于工艺玻璃钢板/环氧聚酰胺/弹性聚氨酯磁漆涂层的耐侯性能;对于同种工艺,西沙海洋大气环境对其耐侯性的影响最大,其次是万宁湿热乡村环境,拉萨高原环境影响较小;光照、温度、湿度是涂层老化的主要原因。 相似文献
18.
丙烯酸聚氨酯涂层在我国典型大气环境下的老化历程 总被引:2,自引:0,他引:2
本文采用交流阻抗测试技术、傅立叶红外测试技术研究了丙烯酸聚氨酯涂层在我国典型大气环境(武汉、拉萨)下户外降解规律,分析了其降解机理,比较了不同地区的环境老化强度,并探讨了丙烯酸聚氨酯涂层降解过程中电化学等效回路模型的转换问题.结果表明:(i)随曝露时间的延长,涂层的孔隙率增加、孔隙结构增大,体系由一个时间常数特征转为两个时间常数特征,涂层内逐渐形成了腐蚀性离子通往基底金属的通道,基底金属发生腐蚀,随金属腐蚀产物的增加,金属/溶液双电层电容逐渐被具有弥散效应的电容元件替换;(ii)丙烯酸聚氨酯涂层抗蚀性能的降低主要由涂层内高分子链节的断裂所致,随曝露时间的延长,在仲酰胺处发生断裂,生成了新的基团伯酰胺;(iii)丙烯酸聚氨酯涂层在拉萨地区的降解速率较武汉地区快. 相似文献
19.
20.
辐射固化纳米环氧酚醛涂层在耐腐蚀、抗渗透、防结垢、防结蜡、耐磨损、抗细菌腐蚀、耐热性及绝热性等方面均有着突出的表现,在提高生产效率、节能降耗、安全环保等方面也有着积极的作用.这些突出的综合性将能够有效应对近年来的高温、高压、高含硫气田中频繁发生的集输管道腐蚀失效问题.在不久的将来,该类涂层可能会是石油化工管道功能性涂层中最好的选择之一. 相似文献