Performance and mechanism for cadmium and lead adsorption from water and soil by corn straw biochar

Cadmium (Cd) and lead (Pb) in water and soil could be adsorbed by biochar produced from corn straw. Biochar pyrolyzed under 400°C for 2 h could reach the ideal removal efficiencies (99.24%and 98.62% for Cd and Pb, respectively) from water with the biochar dosage of 20 g·L^–1 and initial concentration of 20 mg·L^–1. The pH value of 4–7 was the optimal range for adsorption reaction. The adsorption mechanism was discussed on the basis of a range of characterizations, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Raman analysis; it was concluded as surface complexation with active sorption sites (-OH, -COO-), coordination with π electrons (C = C, C = O) and precipitation with inorganic anions (OH^-, CO₃ ^2–, SO₄ ^2–) for both Cd and Pb. The sorption isotherms fit Langmuir model better than Freundlich model, and the saturated sorption capacities for Cd and Pb were 38.91 mg·g^-1 and 28.99 mg·g^–1, respectively. When mixed with soil, biochar could effectively increase alkalinity and reduce bioavailability of heavy metals. Thus, biochar derived from corn straw would be a green material for both removal of heavy metals and amelioration of soil.

Open image in new window

     

Adsorption of fluoride on clay minerals and their mechanisms using X-ray photoelectron spectroscopy

This research investigates the adsorption mechanisms of fluoride (F) on four clay minerals (kaolinite, montmorillonite, chlorite, and illite) under different F^? concentrations and reaction times by probing their fluoride superficial layer binding energies and element compositions using X-ray photoelectron spectroscopy (XPS). At high F^? concentrations (C ₀ = 5?C1000 mg·L^?1), the amount of F^? adsorbed (Q _F), amount of hydroxide released by clay minerals, solution F^? concentration, and the pH increase with increasing C ₀. The increases are remarkable at C ₀>50 mg·L^?1. The QF increases significantly by continuously modifying the pH level. At C ₀<5?C100 mg·L^?1, clay minerals adsorb H⁺ to protonate aluminum-bound surface-active hydroxyl sites in the superficial layers and induce F^? binding. As the C ₀ increases, F^?, along with other cations, is adsorbed to form a quasi-cryolite structure. At C ₀>100 mg·L^?1, new minerals precipitate and the product depends on the critical Al³⁺ concentration. At [Al³⁺]>10^?11.94 mol·L^?1, cryolite forms, while at [Al³⁺]<10^?11.94 mol·L^?1, AlF₃ is formed. At low C ₀ (0.3?C1.5 mg·L^?1), proton transfer occurs, and the F^? adsorption capabilities of the clay minerals increase with time.     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

镉在北京褐潮土中对玉米幼苗及其根际微生物的毒性效应

通过温室盆栽实验,研究了镉在北京褐潮土中对玉米(品种郑单958)幼苗的毒性效应及其生物富集特性,并通过聚合酶链式反应-变性梯度凝胶电泳(PCR-DGGE)技术,探讨了镉对玉米根际微生物群落结构的影响。结果表明,高浓度(>100mg·kg-1)镉对玉米幼苗的生长发育有明显的抑制作用,北京褐潮土中镉引起玉米幼苗株高下降1/2的效应浓度(EC50)为654.6mg·kg-1,引起玉米根部和地上部干质量下降1/2的EC50分别为323.6和110.2mg·kg-1,玉米幼苗地上部生物量(干质量)可作为评价重金属生态毒性的适宜终点。玉米幼苗对镉有一定的吸收累积效应,镉在玉米幼苗各组织中的浓度分布为根>茎>叶,其中根部对镉有一定的富集作用(生物富集系数BAF>1)。镉污染可引起玉米根际微生物群落结构发生改变,高浓度(1000mg·kg-1)镉可导致部分微生物种群数量减少甚至完全消失,表明镉污染可对植物幼苗、植物根际微生物以及植物-微生物之间的相互作用造成重要的干扰和威胁。     

Metabolic responses of Azolla pinnata to cadmium stress: photosynthesis,antioxidative system and phytoremediation

This present study deals with the growth, photosynthesis, oxidative stress and phytoremediation character of Azolla pinnata L. exposed to different levels (0.05, 0.1, 0.5, 1.0, 1.5 and 2.0 mg·L^?1) of cadmium (Cd). Significant accumulation of Cd in Azolla fronds was noticed after 24 and 96 h of exposure and the accumulation rate was dose and time dependent. Growth of A. pinnata increased significantly after both exposure times with and without metal. At lower Cd doses (0.05 and 0.1 mg·L^?1), growth and photosynthesis of A. pinnata showed a marginal increase over the respective control, however, at higher Cd doses (0.5, 1.0, 1.5 and 2.0 mg·L^?1), a decreasing trend was noticed. At lower doses, Azolla fronds could counterbalance the negative effect of enhanced levels of superoxide radicals (SOR) and hydrogen peroxide (H₂O₂) through the greater activity of antioxidative enzymes. The decaresing trends in catalase and peroxidase activity at higher Cd doses suggest that Azolla fronds were not able to mitigate the negative effects of H₂O₂, hence an increase in malondialdehyde content was noticed. The study concludes that up to 0.1 ,mg·L^?1 Cd, A. pinnata can flourish and be used as biofertiliser and for phytoremedial purposes in Cd-contaminated fields; beyond this concentration poor growth may restrict its application.     

纳米TiO2与重金属Cd对铜绿微囊藻生物效应的影响

为了更全面地评价纳米TiO2的生物效应,尤其是纳米TiO2与其他环境污染物的联合作用,以铜绿微囊藻为受试生物,探讨了不同浓度的纳米TiO2,以及纳米TiO2与Cd联合作用对藻生长的影响。根据叶绿素a及藻胆蛋白的含量变化,低浓度的纳米TiO2溶液(0～50mg.L-1)可以促进藻的生长,当纳米TiO2的浓度大于50mg·L-1时,藻细胞的生长有所抑制,生长减慢,并呈剂量-效应关系;当纳米TiO2与Cd离子同时存在时,由于纳米TiO2对Cd离子的吸附作用,水中游离态Cd离子浓度降低,Cd离子对藻的毒性明显降低。因此,纳米TiO2的生态毒性和环境效应不容忽视,同时,应重视纳米材料及与其他环境污染物质共同作用后的生物效应。     

Immobilized Lentinus edodes residue as absorbent for the enhancement of cadmium adsorption performance

To investigate the potential use of Lentinus edodes (L. edodes) residue for Cd²⁺ adsorption, poly alcohol Na alginate (PVA) was applied to immobilize it. The parameters including contact time, pH, adsorbent dosages, and coexisting metal ions were studied. The suitable pH for immobilized L. edodes was 4?C7 wider than that for raw L. edodes (pH 6?C7). In the presence of Pb²⁺ concentration varying from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 6.71% and 47.45% for immobilized and raw L. edodes, respectively. While, with the coexisting ion Cu²⁺ concentration varied from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 12.97% and 50.56% for immobilized and raw L. edodes, respectively. The Cd²⁺ adsorption isotherms in single-metal and dual-metal solutions were analyzed by using Langmuir, Freundlich, and Dubinin-Radushkevich models. The Cd²⁺ adsorption capacities (q _m) in single-metal solution were 6.448 mg·L^?1 and 2.832 mg·L^?1 for immobilized and raw L. edodes, respectively. The q _m of immobilized L. edodes were 1.850 mg Cd·g^?1 in Cd²⁺ + Pb²⁺ solution and 3.961 mg Cd·g^?1 in Cd²⁺ + Cu²⁺ solution, respectively. The Cd²⁺ adsorption processes subjected to both adsorbents follow pseudo-second-order model. Mechanism study showed the functional group of L. edodes was -OH, -NH, -CO, and PVA played an important role in metal adsorbing. Mining wastewater treatment test showed that PVA-SA-immobilized L. edodes was effective in mixed pollutant treatment even for wastewater containing metal ions in very low concentration.     

重金属胁迫对日本对虾(Penaeus japonicas )胚胎发育的影响

以受精1 h以内的日本对虾受精卵为实验对象,采用静水试验方法,研究了Zn、Hg、Cu、Pb、As、Cd和Cr 7种重金属对日本对虾胚胎发育的影响。结果表明,在实验浓度范围内,7种重金属中Hg、Cu对日本对虾胚胎发育毒性最大,其次是Zn、As、Cd,Pb和Cr无明显影响。Hg、Cu、Cd、As、Zn对日本对虾胚胎LC₅₀值分别为：0.0177 mg·L^-1、0.1070 mg·L^-1、1.6057 mg·L^-1、3.3682 mg·L^-1、8.2644 mg·L^-1,致死效应最低可观测效用浓度（LOEC）分别为0.0037 mg·L^-1、0.0166 mg·L^-1、0.1302 mg·L^-1、1.1572 mg·L^-1、2.1522 mg·L^-1;抑制发育LOEC分别为0.0062 mg·L^-1、0.0176 mg·L^-1、0.4002 mg·L^-1、1.9497 mg·L^-1、0.0617 mg·L^-1。随着Hg、Cu浓度的升高,胚胎孵化率不断下降,无节幼体死亡率不断上升,在Hg 0.0256 mg·L^-1浓度组中,胚胎48 h死亡率达到100%。以上结果说明,Hg、Cu等重金属的存在会延缓日本对虾胚胎的发育速度,随着重金属浓度的增加,滞育现象愈加明显,在Cu 0.32 mg·L^-1浓度组中,未见无节幼体孵出。     

砷浓度、形态及碳酸氢盐对蜈蚣草吸收砷的影响

大同盆地是典型的高砷地下水分布区。利用从地方性砷中毒严重病区山阴县采集的高砷地下水样品,用稀释培养法实验研究了外加砷源对地下水中微生物数量的影响;同时基于生物学可培养法和16S rDNA序列比对法,选取代表性高砷水样,研究了耐砷菌的种群特征。结果表明,外加砷源对地下水中微生物数量影响显著,高浓度砷会抑制大部分微生物生长,使微生物数量减少;低浓度砷对微生物生长具有一定促进作用。通过多次分离、纯化从3个不同砷含量地下水样中分离到多株砷抗性菌,经鉴定属于主要为Bacillus、Pseudomonas、Paenibacillus、Aeromonas、Enterobacter5个属。从RDP(Ribosomal Database Project)分析显示3个水样可培养微生物组成不同,都有生存能力强能够耐低浓度NaAsO₂的Bacillales,优势耐砷菌是γ-proteobacteria,其中Enterbacter具有耐高浓度NaAsO₂的能力。     

砷浓度、形态及碳酸氢盐对蜈蚣草吸收砷的影响

为了探讨超富集植物蜈蚣草在处理高砷地下水方面的可行性,研究了水培条件下砷的浓度、形态和碳酸氢盐(HCO-3)对超富集植物蜈蚣草吸收砷的影响。实验中使用了浓度为0.1～100mg·L-1的As(III)和As(V)溶液。HCO-3处理中,HCO-3浓度范围为0.5～20mmol·L-1,As(III)或As(V)的浓度为5mg·L-1。结果表明,在水培条件下,蜈蚣草具有明显的耐高砷特征。当介质砷含量高达100mg·L-1时,砷的去除率可达到80%,且对As(III)的吸收效率高于As(V)。植物体内砷形态研究表明,蜈蚣草体内2种形态砷的含量与外源砷形态有一定的关系,As(V)处理条件下,植物体中的As(V)比例较As(III)处理高。高浓度的HCO-3(20mmol·L-1)处理对蜈蚣草地上部分生物量没有明显影响,但是抑制了地下部分的生长,并且对砷的吸收表现出明显的抑制作用。     

Multivariate optimization of Cd(II) biosorption onto Ulmus tree leaves from aqueous waste

Ulmus tree leaves were successfully used as a novel and efficient biosorbent for removing cadmium, (Cd(II)), from aqueous solutions in a batch system. A multivariate strategy for optimization of removal efficiency conditions of Cd(II) was carried out. A 2³ full factorial design with three center points (9 runs) was performed for screening the main variables and reducing the large number of experimental runs. Initial concentration of metal ion (C _m), amount of sorbent (m), and pH were considered as the three main variables at two different levels. The maximum removal efficiency of Cd(II) was achieved within 1 h contact time. It was found that all the main factors and their interactions were significant at p < 0.05. Doehlert response surface methodology was utilized (13 runs) for finding a suitable mathematical model. The analysis of variance and some statistical tests such as lack-of-fit, coefficient of determination (R ²), and residual distribution plot confirmed the validity of the model. The optimum conditions for maximum removal of Cd(II) by Ulmus tree leaves were found as pH = 3.4, m (amount of sorbent) = 0.128 g, C _m (initial concentration of metal ion) = 12.1 mg L^?1.     

茄子苗对镉积累和耐性的品种间差异

通过盆栽实验方法研究了13种茄子幼苗对镉(Cd)积累与耐性的品种间差异。结果表明,这些茄子幼苗根及地上部Cd含量均随土壤中外加Cd的量的增加而提高。品种间存在着显著差异(P<0.05),其中Cd含量最高品种根部和地上部的Cd含量分别为Cd含量最低品种的2.1、2.4倍(2mg·kg-1Cd处理组)和1.5、1.6倍(4mg·kg-1Cd处理组)。不同品种幼苗对Cd的富集系数均大于1,表现出较强的富集能力。但转运系数均小于1,Cd从根部向地上部转移能力较弱,大多数品种间差异不大。当Cd添加量为2mg·kg-1时,只有绿龙长茄地上部生物量显著下降(P<0.05)。当Cd添加量提高到4mg·kg-1时,6个品种地上部生物量显著下降(P<0.05),这些品种对Cd的耐性较弱。综合评价,辽茄三号对Cd积累的含量最低,富集系数和转移系数也较低,对Cd具有较强的耐性,具有Cd低积累特征。     

Biosorption of cadmium and nickel ions using marine macrophyte,Cymodocea nodosa

ABSTRACT

Seagrass (Cymodocea nodosa) ability to remove cadmium and nickel ions from single metal solutions was investigated in the present study. Metal ions were measured in the solution using an atomic absorption spectrophotometer. Various operational parameters (initial pH, biomass dose, metal ion concentration, and contact time) were tested and found to affect the uptake capacity of Cd (II) and Ni (II). More than 70% of biosorption capacity occurred in the first few minutes for both metal ions. The pseudo-second-order kinetic model and the Langmuir model were found to best fit the experimental data of Cd (II) and Ni (II) biosorption. The maximum uptake capacity (q_max) was 11.6 and 16.7?mg.g^?1 for Cd (II) and Ni (II), respectively. The biosorbent was characterised using Fourier transform infrared spectrometry (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX). The infrared spectrum demonstrated that hydroxyl, carboxyl, and phenolic functional groups are the major binding sites for Cd (II) and Ni (II) metals. The ion exchange mechanism plays an important role during biosorption process as shown in EDX analysis. Our results conclude that marine macrophyte C. nodosa can be used as a low-cost biosorbent for the removal of Cd (II) and Ni (II) in wastewater.     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Ackee apple (Blighia sapida) seeds: a novel adsorbent for the removal of Congo Red dye from aqueous solutions

The ability of ackee apple (AA) seeds to remove Congo Red (CR) dye from aqueous solution was investigated. AA was characterised using thermo gravimetric analyser, scanning electron microscopy, Braunauer Emmett Teller, pH_pzc, elemental analysis and Boehm titration. The effects of operational parameters such as adsorbent dosage, contact time, initial dye concentration and solution pH were studied in a batch system. pH has a profound influence on the adsorption process. Maximum dye adsorption was observed at pH 3.0. The reaction was fast, reaching equilibrium in 90 min. Adsorption data were best described by Langmuir isotherm and the pseudo-second-order kinetic model with a maximum monolayer coverage of 161.89 mg·g^?1. Both boundary layer and intraparticle diffusion mechanisms were found to govern the adsorption process. Thermodynamic parameters such as standard free energy change (Δ G ⁰), standard enthalpy change (Δ H ⁰), and standard entropy change (Δ S ⁰) were studied. Values of Δ G ⁰ varied between?30.94 and?36.56 kJ·mol^?1, Δ H ⁰ was 25.61 kJ·mol^?1, and Δ S ⁰ was 74.84 kJ·mol^?1·K^?1, indicating that the removal of CR from aqueous solution by AA was spontaneous and endothermic in nature. Regeneration and reusability studies were carried out using different eluents. AA gave the highest adsorption efficiency up to four cycles when treated with 0.3 M HCl. AA was found to be an effective adsorbent for the removal of CR dye from aqueous solution.     

Defluoridation of drinking water using Al3+-modified bentonite clay: optimization of fluoride adsorption conditions

Al³⁺-bentonite clay (Alum-bent) was prepared by ion exchange of base cations on the matrices of bentonite clay. Intercalation of bentonite clay with Al³⁺ was performed in batch experiments. Parameters optimized include time, dosage, and Al³⁺ concentration. Physicochemical characterization of raw and modified bentonite clay was done by X-ray fluorescence, X-ray diffraction, energy dispersive X-ray spectrometry attached to scanning electron microscopy, Brunauer–Emmett–Teller analysis, cation exchange capacity (CEC) by ammonium acetate method, and pH_pzc by solid addition method. Chemical constituents of water were determined by atomic absorption spectrometry (AAS), ion selective electrode (Crison 6955 Fluoride selective electrode) and a Crison multimeter probe. For fluoride removal, the effect of contact time, adsorbent dosage, adsorbate concentration, and pH were evaluated in batch procedures. The adsorption capacity of fluoride by modified bentonite clay was observed to be 5.7 mg g^?1 at (26 ± 2) °C room temperature. Maximum adsorption of fluoride was optimum at 30 min, 1 g of dosage, 60 mg L^?1 of adsorbate concentration, pH 2–12, and 1:100 solid/liquid (S/L) ratios. Kinetic studies revealed that fluoride adsorption fitted well to pseudo-second-order model than pseudo first order. Adsorption data fitted well to both the Langmuir and Freundlich adsorption isotherms, hence, confirming monolayer and multilayer adsorption. Alum-bent showed good stability in removing fluoride from ground water to below the prescribed limit as stipulated by World Health Organization. As such, it can be concluded that Alum-bent is a potential defluoridation adsorbent which can be applied in fabrication of point of use devices for defluoridation of fluoride-rich water in rural areas of South Africa and other developing countries. Based on that, this comparative study proves that Alum-bent is a promising adsorbent with a high adsorption capacity for fluoride and can be a substitute for conventional defluoridation methods.     

Assessment of heavy metals contamination in soils surrounding a gold mine: comparison of two digestion methods

This study investigated two digestion methods (USEPA 3051: microwave, HNO₃ or Hossner: hot plate, HF–H₂SO₄–HClO₄) for heavy metals analysis in contaminated soil surrounding Mahad AD'Dahab mine, Saudi Arabia. Moreover, contamination metal levels were estimated. The Hossner and USEPA 3051 methods showed, respectively, average total contents of 17.2 and 18.1 mg kg^?1 for Cd, 11.6 and 10.6 mg kg^?1 for Co, 45.7 and 34.7 mg kg^?1 for Cr, 1030 and 1100 mg kg^?1 for Cu, 33,300 and 27,400 mg kg^?1 for Fe, 963 and 872 mg kg^?1 for Mn, 33.2 and 22.8 mg kg^?1 for Ni, 791 and 782 mg kg^?1for Pb, and 6320 and 2870 mg kg^?1 for Zn. A lack of significant differences and a high correlation coefficient (>90%) for Cd, Pb and Cu between the two digestion methods suggest that the total-recoverable method (USEPA 3051) may be equivalent to the total-total digestion method (Hossner) for determining these metals in the studied soil. However, significantly higher concentrations of Cr, Fe, Ni and Zn were found by the Hossner method comapred with the USEPA 3051 method. The soil samples have very or extremely high levels of Zn, Cu, Cd and Pb contamination, indicating very high potential ecological risk.     

沉积物中五氯酚对底栖生物的急慢性毒性效应

以淡水底栖动物花翅羽摇蚊幼虫和淡水单孔蚓为研究对象,研究了沉积物中五氯酚对底栖生物的急慢性毒性效应。五氯酚对花翅羽摇蚊幼虫96 h及10 d的半数致死浓度(LC50)分别为20.6 mg·kg-1和12.5 mg·kg-1,28 d羽化半数抑制浓度(EC50)为0.79 mg·kg-1。沉积物中五氯酚对花翅羽摇蚊幼虫的羽化具有延滞作用,而且对雌性摇蚊羽化的延滞作用大于雄性,最终导致羽化摇蚊的性别失衡。淡水单孔蚓对五氯酚的耐受力较摇蚊幼虫强。五氯酚对淡水单孔蚓的96 h及14 d的LC50分别为37.6 mg·kg-1和20.2 mg·kg-1,对淡水单孔蚓21 d生长抑制的EC50为1.39 mg·kg-1。研究结果对推导五氯酚沉积物质量基准和进行沉积物生态风险评价提供依据。     

Kinetic and mechanism studies of the adsorption of lead onto waste cow bone powder (WCBP) surfaces

This study examines the adsorption isotherms, kinetics and mechanisms of Pb²⁺ sorption onto waste cow bone powder (WCBP) surfaces. The concentrations of Pb²⁺ in the study range from 10 to 90 mg/L. Although the sorption data follow the Langmuir and Freundlich isotherm, a detailed examination reveals that surface sorption or complexation and co-precipitation are the most important mechanisms, along with possibly ion exchange and solid diffusion also contributing to the overall sorption process. The co-precipitation of Pb²⁺ with the calcium hydroxyapatite (Ca-HAP) is implied by significant changes in Ca²⁺ and PO₄ ^3? concentrations during the metal sorption processes. The Pb²⁺ sorption onto the WCBP surface by metal complexation with surface functional groups such as ≡ POH. The major metal surface species are likely to be ≡ POPb⁺. The sorption isotherm results indicated that Pb²⁺ sorption onto the Langmuir and Freundlich constant q _max and K _F is 9.52 and 8.18 mg g^?1, respectively. Sorption kinetics results indicated that Pb²⁺ sorption onto WCBP was pseudo-second-order rate constants K ₂ was 1.12 g mg^?1 h^?1. The main mechanism is adsorption or surface complexation (≡POPb⁺: 61.6%), co-precipitation or ion exchange [Ca_3.93 Pb_1.07 (PO₄)₃ (OH): 21.4%] and other precipitation [Pb 50 mg L^?1 and natural pH: 17%). Sorption isotherms showed that WCBP has a much higher Pb²⁺ removal rate in an aqueous solution; the greater capability of WCBP to remove aqueous Pb²⁺ indicates its potential as another promising way to remediate Pb²⁺-contaminated media.     

Dynamic changes in radial oxygen loss and iron plaque formation and their effects on Cd and As accumulation in rice (Oryza sativa L.)

Temporal variations and correlations between radial oxygen loss (ROL), iron (Fe) plaque formation, cadmium (Cd) and arsenic (As) accumulation were investigated in two rice cultivars at four different growth stages based upon soil pot and deoxygenated solution experiments. The results showed that there were significant differences in ROL (1.1–16 μmol O₂ plant^?1 h^?1), Fe plaque formation (4,097–36,056 mg kg^?1), Cd and As in root tissues (Cd 77–162 mg kg^?1; As 49–199 mg kg^?1) and Fe plaque (Cd 0.4–24 mg kg^?1; As 185–1,396 mg kg^?1) between these growth stages. ROL and Fe plaque increased dramatically from tillering to ear emergence stages and then were much reduced at the grain-filling stage. Furthermore, significantly positive correlations were detected between ROL and concentrations of Fe, Cd and As in Fe plaque. Our study indicates that increased Fe plaque forms on rice roots at the ear emergence stage due to the increased ROL. This stage could therefore be an important period to limit the transfer and distribution of Cd and As in rice plants when growing in soils contaminated with these toxic elements.