铜-胺改性ZSM-5吸附剂的制备及其对NOx的净化机理

以ZSM-5分子筛粉体为原料,成型后负载铜盐和有机胺改性,制备出一种高效脱除氮氧化物的吸附剂。通过改变铜盐、有机胺的含量以及铜盐活化温度使吸附剂的性能得到优化,在实验条件下（NO：初浓度1000mg／m^3,气流2．7L／min）床层对NO2动态吸附的透过时间由改性前的3min提高到90min,并使NO气体的释放得到有效减缓。通过动态吸附实验研究了NO释放时间在负载前后的变化,通过X射线光电子能谱（XPS）和红外分析（FTIR）研究了吸附剂表面铜元素、有机基团等在吸附前后的变化规律,提出了可能的净化机理。     

利用13X沸石分子筛净化含NH+4-N废水的实验研究

研究了13X沸石分子筛在静态和动态条件下对中低浓度含NH⁺₄-N废水的吸附性能,包括影响吸附的主要因素、沸石对NH⁺₄-N的吸附效果和沸石的再生等。静态实验结果表明,pH值为6.5～7.5,吸附时间35 min,吸附温度20～30℃的条件下,沸石对50 mL NH⁺₄-N初始浓度（C0）为80 mg/L的废水吸附效果最佳,吸附过程符合Langmuir型吸附等温式,饱和吸附量为8.61 mg/g。动态条件下,随水力停留时间增加,沸石对NH⁺₄-N的吸附量上升,最大饱和吸附量可达24.20 mg/g,吸附过程符合Thomas吸附模型。直接焙烧法对吸附后的沸石进行再生活化处理效果良好。实验证明,利用13X沸石净化中低浓度含NH⁺₄-N废水具有良好的工业化应用前景。     

MWNTs及MWNTs/TiO2对水中1,2,3-三氯苯的吸附特性研究

采用批量平衡实验,对比研究了多壁碳纳米管（MWNTs）及多壁碳纳米管/二氧化钛复合材料（MWNTs/TiO₂）对水中1,2,3-三氯苯的吸附特性。结果表明,在相同条件下,MWNTs及MWNTs/TiO₂对1,2,3-三氯苯（1,2,3-TCB）的最大吸附量分别为71.8 mg/g和3.05 mg/g,pH值在2~11之间变化时,两者的吸附均不受pH值变化的影响。2种吸附剂的吸附过程均符合拟二级动力学方程,但MWNTs/TiO₂对1,2,3-TCB的吸附速率常数为0.4159 g/(mg·min),约为MWNTs的50倍左右,说明MWNTs/TiO₂具有更强的吸附驱动力。1,2,3-TCB在2种吸附剂上的吸附过程均可用Freundlich吸附等温线来描述,其热力学参数吉布斯自由能△G⁰均为负、标准焓变△H⁰与熵变△S⁰均为正表明,MWNTs及MWNTs/TiO₂吸附1,2,3-TCB过程为自发吸热反应。与MWNTs相比,MWNTs/TiO₂具有可光催化再生的优点,能用于被污染水体的原位修复。     

微量NO2对厌氧氨氧化甲烷化反硝化耦合影响的动力学分析

采用批试验方法,研究微量NO₂对颗粒污泥厌氧氨氧化、甲烷化和反硝化耦合的影响。基于Haldane模型建立了厌氧氨氧化的NO₂强化函数,估计了强化函数中的最大强化系数（30.55）、NO₂半饱和常数（1.96 mg/L）、NO₂抑制常数（0.0082 mg/L）和基础速率系数（0.0314）。微量NO₂对甲烷化和反硝化动力学可用反竞争性抑制动力学方程进行描述。甲烷化的最大比乙酸盐去除速率为0.15 mg COD/（mg VSS·h）,乙酸盐半饱和常数为395 mg COD/L,NO₂抑制系数为0.623 mg/L。反硝化的亚硝酸盐氮最大去除速率0.00685 h^-1,亚硝酸盐氮半饱和常数 0.214 mg/L,NO₂抑制系数为22.4 mg/L。试验中大部分的NOx气体物质出现损失。     

克劳氏芽孢杆菌(Bacillus clausii S-4)吸附Zn2+的研究

为了验证生物吸附剂去除废水中重金属离子Zn²⁺的可行性，筛选了一株高效吸附Zn²⁺的微生物菌株克劳氏芽孢杆菌Bacillus clausii S-4。采用火焰原子吸收、红外光谱和扫描电镜能谱分析，对这种新型生物吸附剂在水相中吸附Zn²⁺的性能和机理进行了研究。结果表明，B. clausii S-4菌体在20 ℃、30 ℃、40 ℃条件下，吸附Zn²⁺的最佳pH为4.5，吸附容量为57.5 mg/g，吸附容量随温度的升高而增加，吸附过程是吸热反应，吸附平衡时间约30 min。吸附前后，B. clausii S-4菌体表面上的化学官能团和金属离子发生了明显的变化，—OH、—NH⁺₄、—COOH、（—CO—NH—）、—C₆H₅等官能团可能参与了吸附过程。0.1 mol/L HNO₃、HCl和EDTA对锌的解吸附效果较好。在矿山废水中，B. clausii S-4菌体对Zn²⁺的吸附效果也比较理想，显示出其潜在的应用价值。     

小型燃油锅炉NOx的排放特征与管理控制

以68台燃油锅炉（≤10.5 MW）NO_x排放实测数据为基础,通过统计分析方法,研究了NO_x的排放特征;通过对比分析,探讨了我国燃油锅炉NO_x排放控制与管理现状,讨论了进一步加强我国燃油锅炉NO_x排放管理控制的可能性与可行性,并提出了相应的管理控制建议。结果表明,NO_x平均排放浓度为318.2 mg/m³,     

质子化改性交联壳聚糖的制备及其吸附硫酸根离子的性能

以壳聚糖为原料,甲醛为氨基保护剂,戊二醛为交联剂,采用反相悬浮交联法制备交联壳聚糖,再对其进行质子化改性得到质子化改性交联壳聚糖吸附剂。通过正交实验对该吸附剂的制备条件进行优化,并对其吸附水中硫酸根（SO₄^2-）的吸附等温特性和动力学进行研究,最后对制备和吸附过程进行能谱分析（EDS）并对吸附剂进行了再生实验。实验结果表明,交联反应的优化条件为：反应温度50℃、反应时间6 h、甲醛：戊二醛：壳聚糖为4.5：0.5：3（质量比）;该吸附过程符合Langmuir吸附等温模型,在25℃（298 K）下,吸附容量最大可达133.87 mg/g;吸附过程较好地符合拟二级动力学模型;EDS分析表明了交联反应、质子化改性和吸附反应均已发生;该吸附剂的再生性能良好,可以重复使用。     

镧负载改性TiO2太阳光催化降解微囊藻毒素的研究

考察了镧负载改性TiO₂催化剂在太阳光下降解微囊藻毒素LR (MCLR)的效果及其影响因素。结果表明,镧负载改性的TiO₂可显著增加MCLR在TiO₂表面的吸附量,同时提高MCLR在太阳光下的降解率。随着镧负载量的增加,太阳光下MCLR降解率可从65%提高到95%,pH降低可促进MCLR的降解。改性TiO₂对藻毒素的降解存在最佳投加量,实验结果表明,在pH=6,MCLR初始浓度为2 mg/L,0.001-La-TiO₂的最佳投量为0.5 g/L,在3 600 μW/cm²太阳光下照射30 min,降解率可达97%。     

壳聚糖联合碱改性粉煤灰对重金属离子的吸附特性

采用浸渍法将壳聚糖负载在经NaOH改性的粉煤灰上,制备了联合改性的粉煤灰。随粉煤灰上壳聚糖负载量的增加,粉煤灰对Pb²⁺和Cd²⁺的吸附率均提高。当负载壳聚糖的质量分数为8%,吸附温度为30℃,吸附时间为120 min时,粉煤灰对Pb²⁺的吸附率最高（为98.9%）,对Cd²⁺的吸附率也最高（为91.5%）。其吸附行为符合Freundlich等温吸附模型,但表现为2个线性区。粉煤灰负载壳聚糖的改性机理是粉煤灰与带正电荷的壳聚糖的化学键合作用。     

负载V2O5-WO3/TiO2掺炭纤维脱除烟气中Hg0

通过固定床实验系统研究烟气脱除零价汞的实验,首先研究了滤袋常用的聚苯硫醚（polyphenylene sulfide,PPS）以及活性炭纤维（activated carbon fiber,ACF）在不同温度、不同气体组分下负载V₂O₅-WO₃/TiO₂催化剂,对模拟燃煤烟气中零价汞（Hg⁰）的脱除效果。然后对比研究了活性炭纤维协同滤袋常用纤维负载催化剂后,对模拟燃煤烟气中Hg⁰的脱除性能。结果表明,在汞蒸气入口浓度为50 μg/m³,纯N₂气氛下,当温度为25℃时,两者脱除率均能达到99%,当温度为200℃,负载催化剂的活性炭纤维脱除率在30%左右,PPS纤维仅为10%左右。在200℃情况下,模拟烟气的组分为N₂+O₂时,2种纤维的Hg⁰脱除率提高了10%~20%,当在混合气体中添加0.01‰后,负载催化剂的PPS纤维Hg⁰脱除率能达到80%,活性炭纤维Hg⁰脱除率能达到98%。当温度为200℃,模拟烟气的组分为N₂+O₂+HCl时,不同性能掺炭纤维负载催化剂后Hg⁰脱除率在69%~95%范围之间变化,其中PPS掺炭纤维对Hg⁰脱除效率最高达到95%,因此,负载V₂O₅-WO₃/TiO₂催化剂的PPS掺炭纤维能在高温烟气中保持较高的Hg⁰脱除率。     

Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.     

北京市交通道路空气中NO_x的污染现状及时空变化规律研究

基于2008年及2009年分4个季节对北京市3种类型道路(开阔型、交叉路口型和峡谷型)空气中的NOx的现场监测结果,分析了3种类型道路空气中NOx的污染现状和时空变化规律及影响因素。实验结果表明,昼间北京市各类型街道空气中NOx浓度呈早晚浓度高、中午浓度低的变化规律,NOx浓度随季节和车流量变化较明显。交通道路空气中NO占NOx的分担率高,且有较好的相关性,而NO2分担率较低,与NOx相关性较差。     

中小型工业窑炉NO_x废气的净化技术与应用

介绍了中小型工业窑炉生产过程中排放NOx的现状,并针对NOx的治理问题,从工程应用角度,简述了湿法和干法净化NOx的原理和化学反应过程。讨论了NOx排放特性和NOx废气中NO2/NOx比例的问题。提出了影响NOx治理的主要因素,包括吸收剂、吸附剂、催化剂和设备的部分应用参数,并结合工程实例指出工程需要注意的问题。介绍了多项采用湿法和干法净化NOx的工程应用项目,丰富了中小工业窑炉NOx废气的治理的实践经验,为中小工业窑炉排放NOx治理奠定了基础。     

Analysis of the relationship between ambient levels of O3, NO2 and NO as a function of NOx in the UK

Monitoring data from the UK Automatic Urban and Rural Network are used to investigate the relationships between ambient levels of ozone (O₃), nitric oxide (NO) and nitrogen dioxide (NO₂) as a function of NO_x, for levels ranging from those typical of UK rural sites to those observed at polluted urban kerbside sites. Particular emphasis is placed on establishing how the level of ‘oxidant’, OX (taken to be the sum of O₃ and NO₂) varies with the level of NO_x, and therefore to gain some insight into the atmospheric sources of OX, particularly at polluted urban locations. The analyses indicate that the level of OX at a given location is made up of NO_x-independent and NO_x-dependent contributions. The former is effectively a regional contribution which equates to the regional background O₃ level, whereas the latter is effectively a local contribution which correlates with the level of primary pollution. The local oxidant source has probable contributions from (i) direct NO₂ emissions, (ii) the thermal reaction of NO with O₂ at high NO_x, and (iii) common-source emission of species which promote NO to NO₂ conversion. The final category may include nitrous acid (HONO), which appears to be emitted directly in vehicle exhaust, and is potentially photolysed to generate HO_x radicals on a short timescale throughout the year at southern UK latitudes. The analyses also show that the local oxidant source has significant site-to-site variations, and possible reasons for these variations are discussed. Relationships between OX and NO_x, based on annual mean data, and fitted functions describing the relative contributions to OX made by NO₂ and O₃, are used to define expressions which describe the likely variation of annual mean NO₂ as a function of NO_x at 14 urban and suburban sites, and which can take account of possible changes in the regional background of O₃.     

燃煤烟气低温SCR脱硝中试研究

低温选择性催化还原(SCR)脱硝是国内外脱硝技术研发的热点,但目前主要集中在实验室小试范围,无法完全反映催化剂在实际烟气中的运行状况。在30 t/h循环流化床燃煤锅炉脱硫除尘装置后建设了2 000~5 000 m3/h的SCR脱硝中试装置,经系统研究发现,中试使用的蜂窝式催化剂对SO2和NO具有很强的吸附能力,且反应温度、喷氨速率和气体空速均会影响催化脱硝效率。为期5 d的连续运行实验结果表明,催化剂的脱硝效率一直稳定在30%~50%,并未发现明显的失活,这证明设计除雾除尘器、较大的混合器、混合器与反应器间较长的管路均有利于缓解催化剂因SO2、H2O和飞灰中的碱性金属导致的失活。     

石家庄市道路交通环境NO_x污染水平及ARMA模型预测

选择石家庄市区代表性路段作为研究对象,对其交通环境空气中NOx的污染水平进行现状监测。基于Matlab软件建立拟合模型,对下一时期的NOx污染趋势进行预测。结果表明,石家庄市交通环境中NOx小时浓度介于0.047~0.237 mg/m3之间,呈早晚高,且下午明显低于上午的日变化规律;NOx日均浓度介于0.076~0.211 mg/m3之间,其浓度与车流量呈明显的正相关性。利用matlab软件建立的ARMA模型能够较好地预测道路交通环境空气中NOx的浓度变化趋势。     

Summer air quality over an artificial lake

In the summer of 1998, the air quality (indicators: CO, NO, NO₂, O₃) above the water surface of the Lake Balderey (Essen, Ruhr area, North Rhine-Westphalia, Germany), an artificial lake used for recreation purposes, was measured using the Fourier transform infrared spectroscopy (FTIR) and differential optical absorption spectroscopy (DOAS) remote measurement methods. The lake, with an area of 3 km² was created by damming the Ruhr and is surrounded by higher ground. In calm, bright weather conditions, this location results in a low-exchange situation (formation of temperature inversions, cold air dynamics) with a sustained impact on pollutant concentrations over the lake. The results of trace substance measurements (1/2 h mean values) were compared with values from comparison stations (suburban, high traffic and forest) located outside the area of the lake. In general, it was found that mean CO and NO concentrations over the lake were very low (0.3 ppm and 7.5 ppb, respectively). NO₂ values (15 ppb) were some 3.5 times higher than those recorded at the forest station and O₃ values, at 27 ppb, almost reached the same level as at the forest station (30 ppb). Mass flow densities as a function of wind direction, diurnal courses, differences between weekdays and weekends and comparisons with air quality standards are presented for the lake station.     

改进钒基SCR脱硝催化剂的抗碱金属中毒性能

以锐钛矿型二氧化钛和钛钨粉(5%WO3-TiO2)为载体,制备了系列钒和钨负载量不同的钒钛催化剂,考察碱金属和碱土金属(钾、钠和钙)对催化剂在氨选择性催化还原(NH3-SCR)氮氧化物反应中催化活性的影响。钾、钠和钙对钒钛催化剂的中毒影响大小顺序为钾钠钙。提高钒钛催化剂中钒的含量可显著提高催化剂的SCR活性和抗碱金属中毒性能,但高钒负载量(4.5%V2O5)造成催化剂氮气选择性明显下降,氧化亚氮生成显著增加。钨的添加有利于提高钒钛催化剂的低温活性和抗碱金属中毒性能,对氮气选择性无明显影响。     

The growth response of Alternanthera philoxeroides in a simulated post-combustion emission with ultrahigh [CO2] and acidic pollutants

Although post-combustion emissions from power plants are a major source of air pollution, they contain excess CO₂ that could be used to fertilize commercial greenhouses and stimulate plant growth. We addressed the combined effects of ultrahigh [CO₂] and acidic pollutants in flue gas on the growth of Alternanthera philoxeroides. When acidic pollutants were excluded, the biomass yield of A. philoxeroides saturated near 2000 μmol mol⁻¹ [CO₂] with doubled biomass accumulation relative to the ambient control. The growth enhancement was maintained at 5000 μmol mol⁻¹ [CO₂], but declined when [CO₂] rose above 1%, in association with a strong photosynthetic inhibition. Although acidic components (SO₂ and NO₂) significantly offset the CO₂ enhancement, the aboveground yield increased considerably when the concentration of pollutants was moderate (200 times dilution). Our results indicate that using excess CO₂ from the power plant emissions to optimize growth in commercial green house could be viable.