贸易隐含碳驱动因素及低碳化路径研究综述

在贸易隐含碳测算和碳排放责任界定成为理论界的研究重点之后,贸易隐含碳的研究也延伸到隐含碳的驱动因素及贸易低碳化路径等方面。概述了采用指标分解法和结构分解法关于贸易隐含碳驱动因素的相关研究,并概括了学者们基于贸易隐含碳驱动因素的研究而提出的关于贸易低碳化发展的路径选择。     

纳米碳材料及在环境保护中的应用前景

从气液固3相对纳米碳材料进行了分析和归类,并对纳米碳材料进行了定义.指出必须从大小和结构上定义纳米碳材料.对纳米碳材料的应用进行了归纳,并通过统计数据反映了目前我国的纳米碳材料的研究动态.     

中国汽车废旧轮胎产生量估算方法及其不确定性

为准确合理估算汽车废旧轮胎产生量,评估其资源潜力并进行可持续管理,构建了基于消费与使用模型的汽车废旧轮胎产生量估算方法,核算了中国汽车废旧轮胎产生量,进一步采用蒙特卡洛方法分析了估算模型中不确定性因素对估算结果的影响.研究结果表明,2002—2019年,中国汽车废旧轮胎年产生量持续增长,从490万t增长至1540万t,...     

火电厂排放的氟化物气体对蚕桑生产的影响

本文结合火电厂实际生产过程和蚕桑生产区实地测量的结果,对火电厂排放的氟化物气体对蚕桑生产的影响过程进行了分析和估算.根据分析和估算提出的方法,对嘉兴发电厂的实际状况进行了个例分析和预测.     

石化企业废水挥发性有机物无组织排放定量方法

阐述了石化企业废水挥发性有机物(VOCs)无组织排放定量估算的必要性,介绍了手工计算法、模型计算法、气相测定法、排放系数法和物料衡算法等几种常用的估算方法及方法的适用条件和优缺点.以 WATER9 模型为主结合其他方法,对国内某石化企业废水 VOCs 无组织排放量进行了定量估算.     

物化强化预处理对化工园区废水中典型污染物转化的影响

以江苏省某化工园区污水处理厂的原水为研究对象,分别采用臭氧氧化、铁碳微电解、Fenton氧化3种物化法对其进行强化预处理,并运用GC-MS技术对典型污染物进行了分析。实验结果表明:臭氧氧化、Fenton氧化、铁碳微电解3种物化法在最佳条件下对COD的去除率分别为8.0%,51.3%,45.6%;在提高可生化性方面,臭氧氧化法效果最好,使废水的BOD_5/COD从0.112提高到0.184,Fenton氧化法和铁碳微电解法的BOD_5/COD分别为0.150和0.123;经物化预处理后,废水中的环状物质会出现开环,同时直链物质增多,但苯环、脂类及杂环等难生物降解物质依然存在;若要单纯提高废水的可生化性,建议选用臭氧氧化法;若对去除COD及提高可生化性皆有要求,建议选用铁碳微电解法。     

我国废弃电器电子产品的EPR执行模式研究

延伸生产者责任,将生产者对产品所负的责任扩展到产品生命周期的消费后阶段,为"废弃产品的环境影响责任"找到了合理的承担主体.研究了延伸生产者责任的概念、种类及待征.以德、日、中国台湾为例,分析了发达国家及地区的废弃电器电子产品的EPR执行模式.总结了我国废弃电器电子产品回收处理的现状、原因及具体实施情况.在借鉴他国及地区成功经验的基础上,提出了我国废弃电器电子产品的EPR执行模式.     

炼油污水处理装置恶臭气体源强估算方法的比较

以某炼油污水处理装置为例,根据其运行现状及恶臭气体的监测结果,使用卫生防护距离反推法、源强经验估算法以及地面浓度反推法3种方法对恶臭气体源强进行估算,并利用AERMOD模式进行预测,对预测值与监测值进行方差分析。实验结果表明：在监测得到的NH₃和H₂S的平均质量浓度分别为0.113,0.006 mg/m³的条件下,卫生防护距离反推法得到的NH₃和H₂S的无组织排放源强分别为2.395,0.127 kg/h。源强经验估算法得到的NH₃和H₂S的源强分别为0.255,0.080 kg/h,地面浓度反推法得到的NH₃和H₂S的源强分别为3.120,0.250 kg/h;源强经验估算法为炼油污水处理装置气体源强估算的最优方法。     

Cu2O/N-CMK-3的制备及其光催化性能

以Cu2O与氮掺杂有序介孔碳(N-CMK-3)为原料,采用沉淀法制备了氧化亚铜氮掺杂有序介孔碳(Cu2O/N-CMK-3)复合光催化剂,并通过XRD、SEM、TEM、UV-Vis DRS和XPS对光催化剂进行了表征.研究了可见光下Cu2O/N-CMK-3对四环素的光催化降解活性及主要活性物种.实验结果表明:当可见光辐照...     

“双碳”视角下残损人民币清分废钞回收利用的路径初探

“双碳”(碳达峰与碳中和)是一项重大战略决策,金融领域内落实“双碳”战略势在必行。随着经济社会发展,我国每年产生的纸币废钞数量巨大,废钞资源的二次利用是金融领域落实“双碳”战略的重要举措。首先总结了传统人民币废钞处理的方法与不足;接着从造纸原料、发电燃料与工艺品原材料3个方面分析了人民币废钞再生利用的具体路径;最后,提出了改进废钞再利用的若干建议。     

Evaluation of current material stock and future demolition waste for urban residential buildings in Jakarta and Bandung,Indonesia: embodied energy and CO<Subscript>2</Subscript> emission analysis

First, this paper evaluates the current building material stock and future demolition waste for urban residential buildings in the cities of Jakarta and Bandung using a material-flow analysis. The actual on-site building measurements were conducted in Jakarta (2012) and Bandung (2011), focusing particularly on unplanned houses, to obtain building material inventory data. A total of 297 houses were investigated in Jakarta, whereas 247 houses were measured in Bandung. Second, this paper analyses the embodied energy and CO₂ emissions of building materials through an input–output analysis. The results show that, overall, the total material input intensity for the houses is 2.67 ton/m² in Jakarta and 2.54 ton/m² in Bandung. Two scenarios with zero and maximum reuse/recycling rates were designed to predict future demolition waste and the embodied energy/CO₂ emissions of building materials in Jakarta. Closed- and open-loop material flows were applied. If the maximum reuse/recycling rates are applied to the closed- and open-loop material flows in Jakarta, then it would become possible to not only decrease the final disposal waste (from 123.9 to 2.1 million ton) but also reduce the corresponding embodied energy (from 247.8 to 192.1 PJ) and CO₂ emissions (from 24.3 to 19.2 million ton CO₂-eq) compared with the zero reuse/recycling scenario from 2012 to 2020.     

Estimation of world trade for used automobiles

In order to provide the basic information for building an international automobile recycling system, this article attempts to estimate the multilateral trade for used automobiles. First, the problems in evaluation of the used automobile trade were clarified through the trade data obtained from the United Nations database (UN-DB) and the Global Trade Information Services database (GTI-DB). Furthermore, we developed an estimation method for the used automobile trade using the highlighted advantages of the UN-DB and GTI-DB. The reasons for employing this estimation method were to correct the systematic errors in both databases and to sample used automobile data from the UN-DB by using the new and used automobile information in the GTI-DB. The world trade volume for used passenger cars in 2005 was estimated by the method developed. These results indicated that total trade volume was 5.65 × 10⁶ vehicles, and that the exports from Germany, the United States, and Japan comprise 22%, 21%, and 20% of the global total, respectively. Moreover, the results indicate that these countries export used passenger cars not only to developing countries (54%), but also to developed countries (46%).     

Temporary structures as a generator of waste in covered trade fairs

Events like trade fairs are a complex service activity with a considerable economic, social and environmental impact due, among other factors, to their high level of waste generation. There are few studies of the environmental impact associated with waste generation and typology. An environmental analysis methodology has been developed to characterise the waste associated with the temporary structures used at trade fair events: stands and communal spaces.This methodology has been checked in a pilot test at 6 closed trade fairs in Barcelona, with a range of between 60 and 4400 exhibitors. The methodology developed has made possible to obtain a waste generation profile according to the size of the fair and the types of stands. The stages with the largest amount of temporary structure wastes generated are the assembly and the dismantling of the trade fair.The results indicate that the most common wastes generated are the protective plastic from carpets at the assembly stage and the carpet itself at the dismantling stage. The stand carpet is collected in bulk, while the carpet from the communal spaces is recycled. As the size of the fair increases, and with it the proportion of stands with customised design (or non-reusable stands), the quantity of wood and hazardous waste increases.     

Chemical speciation of carbon in municipal solid waste incinerator residues

Incinerators do not achieve a complete mineralization of organic constituents of municipal solid waste. The solid residues (bottom ash, boiler ash and air pollution control residues) contain carbon which can be determined as total organic carbon (TOC). This work focuses on the TOC composition and its significance to the genesis and diagenesis of the solid residues. An analytical procedure is presented to characterize carbon species by different chemical and microscopic analytical methods. The procedure is based on two steps. In the first step a quantitative classification of TOC into four different carbon species (elemental carbon, water extractable organic carbon, dichloromethane extractable organic carbon and non extractable organic carbon) is performed to obtain a first survey of the TOC composition. Based on this survey a further characterization of individual carbon species is performed. The results of the qualitative and quantitative characterization of carbon species allow to postulate hypotheses on the influence of organic carbon on the long-term behavior of the solid residues.     

Distribution flow of used motorcycles exported from Japan

This study focuses on used motorcycles (UMCs) that are exported from Japan, observes identifiable characteristics of each destination country's UMC exports, and categorizes their distribution flows. Based on the findings from precedent research, results from compiled data of trade statistics, and field surveys, this study reveals the following characteristics. (1) UMCs are continuously exported to the United Arab Emirates (UAE), but the export numbers fluctuate yearly. The UAE also exports large numbers of UMCs with low displacements and UMCs from all statistical categories except for “other.” (2) The number of UMCs exports to Cambodia has been increasing since 2011. In addition, changes in exports from 51 to 250 cc to low displacements of 50 cc and less are identified. Cambodia also exported UMCs from all statistical categories except “other.” (3) The number of UMCs exports to Myanmar has been increasing since 2015, and the primary units exported exhibit “electric motor propulsion as a motor driving force.” (4) Country trade features are identified and UAE is designated as a “transit trade type” and both Cambodia and Myanmar as “domestic distribution types.”

     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

活性炭生物转盘法处理化工废水

使用固定剂将颗粒状活性炭固定在盘片上，制成了一种新型生物转盘盘片——活性炭生物转盘盘片。采用一级微型生物转盘法处理模拟化工废水，对比了活性炭、石英砂、聚丙烯3种生物转盘的处理效果。实验结果表明，活性炭生物转盘对COD的去除效果好于其他两种转盘。在进水COD为600mg／L、水力停留时间为6h、盘片转速为4r／min的条件下，活性炭生物转盘对COD的去除率可达71．3％。此外，活性炭生物转盘还有较强的耐有机负荷冲击能力。在废水处理过程中，活性炭仅在挂膜的前7天起吸附作用，挂膜成功后生物降解起主导作用。     

A kinetic analysis of solid waste composting at optimal conditions

This discussion explores the possibility of having a measure of the biodegradable organic carbon content in solid wastes. Currently, indirect measures for determining the concentration of biodegradable organic matter are being used and most of them are based on respiration indices (oxygen consumption or carbon dioxide production) or chemical parameters (volatile solids or total organic carbon). The results obtained for the cumulative carbon dioxide production in composting experiments can be expressed as "aerobic biodegradable carbon" for the wastes that were studied. The calculation of a useful biodegradable C/N can also be obtained from the aerobic biodegradable carbon content. A comparison with some results obtained in measuring the concentration of "anaerobic biodegradable carbon" also is presented.     

响应面法优化阴阳极同时作用电化学法处理染料废水

在自制电化学反应器中,以甲基橙模拟染料废水为处理对象,采用Box-Behnken Design响应面法研究了影响阴阳极同时作用电化学法处理染料废水的因素及其交互作用。实验得出各因素对废水脱色率影响的大小顺序为：电流密度> Fe³⁺浓度>Cl^-浓度。各因素之间的交互作用对废水脱色率影响的大小顺序为：电流密度和Fe³⁺浓度>电流密度和Cl^-浓度>Fe³⁺浓度和Cl^-浓度。优化结果表明：Fe³⁺浓度为1.02 mmol/L、Cl^-浓度为10.96 mmol/L、电流密度为11.52 mA/cm²时,最佳脱色率为94.67%。阴阳极同时作用电化学法对甲基橙去除效果显著。