Decolorization of azo dyes by a salt-tolerant Staphylococcus cohnii strain isolated from textile wastewater

The salt-tolerant Staphylococcus cohnii strain, isolated from textile wastewater, has been found effective on decolorizing several kinds of azo dyes with different structures. The optimal conditions for azo dye acid red B (ARB) decolorization by S. cohnii were determined to be pH = 7.0 and 30°C. The decolorization efficiency increased with the increase of the salinity concentration, and around 90% of ARB (100 mg·L^?1) could be decolorized in 24 h when the salinity concentration was up to 50 g·L^?1. Moreover, the strain could still decolorize 19% of ARB in 24 h even when the NaCl concentration was increased to 150 g·L^?1. Meanwhile, the dependence of the specific decolorization rate by S. cohnii on the ARB concentration could be described with Michaelis-Menten kinetics (K _m = 585.7mg·L^?1, V _max = 109.8 mg·g cell^?1·h^?1). The addition of quinone redox mediator, named 2-hydroxy-1,4-naphthoquinone and anthraquinone-2,6-disulfonate, significantly accelerated the decolorization performance of S. cohnii. Furtherly, the activities of azoreductase (0.55 ??mol·mg protein^?1·min^?1) and Nicotineamide adenine dinucleotide-dichlorophenol indophenol (NADH-DCIP) reductase (8.9 ??mol·mg protein^?1·min^?1) have been observed in the crude cell extracts of S. cohnii. The decolorization products of ARB were analyzed by HPLC-MS, and the results indicated the reductive pathway was responsible for azo dye decolorization by S. cohnii.     

Determination of selected semi-volatile organic compounds in water using automated online solid-phase extraction with large-volume injection/gas chromatography/mass spectrometry

A rapid, sensitive, and cost-effective analytical method was developed for the analysis of selected semi-volatile organic compounds in water. The method used an automated online solid-phase extraction technique coupled with programmed-temperature vaporization large-volume injection gas chromatography/mass spectrometry. The water samples were extracted by using a fully automated mobile rack system based on x-y-z robotic techniques using syringes and disposable 96-well extraction plates. The method was validated for the analysis of 30 semivolatile analytes in drinking water, groundwater, and surface water. For a sample volume of 10 mL, the linear calibrations ranged from 0.01 or 0.05 to 2.5 ??g·L^?1, and the method detection limits were less than 0.1 ??g·L^?1. For the reagent water samples fortified at 1.0 ??g·L^?1 and 2.0 ??g·L^?1, the obtained mean absolute recoveries were 70%?C130% with relative standard deviations of less than 20% for most analytes. For the drinking water, groundwater, and surface water samples fortified at 1.0 ??g·L^?1, the obtained mean absolute recoveries were 50%?C130% with relative standard deviations of less than 20% for most analytes. The new method demonstrated three advantages: 1) no manipulation except the fortification of surrogate standards prior to extraction; 2) significant cost reduction associated with sample collection, shipping, storage, and preparation; and 3) reduced exposure to hazardous solvents and other chemicals. As a result, this new automated method can be used as an effective approach for screening and/or compliance monitoring of selected semi-volatile organic compounds in water.     

Immobilized Lentinus edodes residue as absorbent for the enhancement of cadmium adsorption performance

To investigate the potential use of Lentinus edodes (L. edodes) residue for Cd²⁺ adsorption, poly alcohol Na alginate (PVA) was applied to immobilize it. The parameters including contact time, pH, adsorbent dosages, and coexisting metal ions were studied. The suitable pH for immobilized L. edodes was 4?C7 wider than that for raw L. edodes (pH 6?C7). In the presence of Pb²⁺ concentration varying from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 6.71% and 47.45% for immobilized and raw L. edodes, respectively. While, with the coexisting ion Cu²⁺ concentration varied from 0 to 30 mg·L^?1, the Cd²⁺ adsorption ratios declined by 12.97% and 50.56% for immobilized and raw L. edodes, respectively. The Cd²⁺ adsorption isotherms in single-metal and dual-metal solutions were analyzed by using Langmuir, Freundlich, and Dubinin-Radushkevich models. The Cd²⁺ adsorption capacities (q _m) in single-metal solution were 6.448 mg·L^?1 and 2.832 mg·L^?1 for immobilized and raw L. edodes, respectively. The q _m of immobilized L. edodes were 1.850 mg Cd·g^?1 in Cd²⁺ + Pb²⁺ solution and 3.961 mg Cd·g^?1 in Cd²⁺ + Cu²⁺ solution, respectively. The Cd²⁺ adsorption processes subjected to both adsorbents follow pseudo-second-order model. Mechanism study showed the functional group of L. edodes was -OH, -NH, -CO, and PVA played an important role in metal adsorbing. Mining wastewater treatment test showed that PVA-SA-immobilized L. edodes was effective in mixed pollutant treatment even for wastewater containing metal ions in very low concentration.     

Mixed culture of <Emphasis Type="Italic">Chlorella</Emphasis> sp. and wastewater wild algae for enhanced biomass and lipid accumulation in artificial wastewater medium

The purpose of this work is to study the co-cultivation of Chlorella sp. and wastewater wild algae under different cultivation conditions (i.e. CO₂, light intensity, cultivation time, and inoculation ratio) for enhanced algal biomass and lipid productivity in wastewater medium using Response Surface Methodology (RSM). The results show that mixed cultures of Chlorella sp. and wastewater wild algae increase biomass and lipid yield. Additionally, findings indicate that CO₂, light intensity and cultivation time significantly affect algal productivity. Furthermore, CO₂ concentration and light intensity, and CO₂ concentration and algal composition, have an interactive effect on biomass productivity. Under different cultivation conditions, the response of algal biomass, cell count, and lipid productivity ranges from 2.5 to 10.2 mg/mL, 1.1 × 10⁶ to 8.2 × 10⁸ cells/mL, and 1.1 × 10¹² to 6.8 × 10¹² total fluorescent units/mL, respectively. The optimum conditions for simultaneous biomass and lipid accumulation are 3.6% of CO₂ (v/v), 160 µmol/m²/s of light intensity, 1.6/2.4 of inoculation ratio (wastewater-algae/Chlorella), and 8.3 days of cultivation time. The optimal productivity is 9.8 (g/L) for dry biomass, 8.6 E + 08 (cells/mL) for cell count, and 6.8 E + 12 (Total FL units per mL) for lipid yield, achieving up to four times, eight times, and seven times higher productivity compared to nonoptimized conditions. Provided is a supportive methodology to improve mixed algal culture for bioenergy feedstock generation and to optimize cultivation conditions in complex wastewater environments. This work is an important step forward in the development of sustainable large-scale algae cultivation for cost-efficient generation of biofuel.

Open image in new window

     

Adsorption of fluoride on clay minerals and their mechanisms using X-ray photoelectron spectroscopy

This research investigates the adsorption mechanisms of fluoride (F) on four clay minerals (kaolinite, montmorillonite, chlorite, and illite) under different F^? concentrations and reaction times by probing their fluoride superficial layer binding energies and element compositions using X-ray photoelectron spectroscopy (XPS). At high F^? concentrations (C ₀ = 5?C1000 mg·L^?1), the amount of F^? adsorbed (Q _F), amount of hydroxide released by clay minerals, solution F^? concentration, and the pH increase with increasing C ₀. The increases are remarkable at C ₀>50 mg·L^?1. The QF increases significantly by continuously modifying the pH level. At C ₀<5?C100 mg·L^?1, clay minerals adsorb H⁺ to protonate aluminum-bound surface-active hydroxyl sites in the superficial layers and induce F^? binding. As the C ₀ increases, F^?, along with other cations, is adsorbed to form a quasi-cryolite structure. At C ₀>100 mg·L^?1, new minerals precipitate and the product depends on the critical Al³⁺ concentration. At [Al³⁺]>10^?11.94 mol·L^?1, cryolite forms, while at [Al³⁺]<10^?11.94 mol·L^?1, AlF₃ is formed. At low C ₀ (0.3?C1.5 mg·L^?1), proton transfer occurs, and the F^? adsorption capabilities of the clay minerals increase with time.     

Adsorption of phosphate ions from water using a novel cellulose-based adsorbent

A novel cellulose-based adsorbent, iron(III)-coordinated amino-functionalised poly(glycidylmethacrylate)-grafted cellulose [Fe(III)–AM-PGMACell] was developed for the removal of phosphate from water and wastewater. The scanning electron micrograph showed that AM-PGMACell has a rougher surface than cellulose and the adsorption of Fe(III) on AM-PGMACell made the surface even rougher. Infrared spectroscopy revealed that amino groups on the surface of AM-PGMACell complexed with Fe(III) played an important role in the removal of phosphate from solutions. X-Ray diffraction patterns showed a decrease in crystallinity after graft copolymerisation onto cellulose. The effects of contact time, initial sorbate concentration, pH, agitation speed, dose of adsorbent and temperature on the removal process were investigated. Maximum removal of 99.1% was observed for an initial concentration of 25 mg·L ^?1 at pH 6.0 and an adsorbent dose of 2.0 g·L ^?1. A two-step pseudo-first-order kinetic model and Sips isotherm model represented the measured data very well. Complete removal of 11.6 mg·L ^?1 phosphate from fertiliser industry wastewater was achieved by 1.6 g·L ^?1 Fe(III)–AM-PGMACell. The adsorbent exhibited very high reusability for several cycles. Overall, the study demonstrated that Fe(III)–AM-PGMACell can be used as an efficient adsorbent for the removal and recovery of phosphate from water and wastewater.     

Effects of ethyl 2-methyl acetoacetate (EMA) on the growth of Phaeodactylum tricornutum and Skeletonema costatum

We investigated the effects of ethyl 2-methyl acetoacetate (EMA) on growth of the marine diatom algae Phaeodactylum tricornutum (P. tricornutum) and Skeletonema costatum (S. costatum). Growth of P. tricornutum was significantly inhibited by the minimum concentration (3.5 mmol·L ^?1) of EMA at lower initial algal densities (IADs) (3.6×10⁴ and 3.3×10⁵ cells·mL ^?1). However, at the highest IAD, significant growth inhibition was found at above 7 mmol·L ^?1 of EMA exposure. In S. costatum, EMA concentrations of 10.5 mmol·L ^?1 or more significantly inhibited growth at lower IAD (3×10⁴ and 1.8×10⁵ cells·mL ^?1); at the highest IAD, only EMA concentrations above 14 mmol·L ^?1 obviously inhibited the growth of S. costatum. Changes in specific growth rates and pigment were consistent with algal growth, but only at higher EMA concentrations or lower IAD values was the ratio of chlorophyll a (Chla) to carotenoid significantly lower than the control. Medium effective concentration (EC ₅₀) values were in the order 4.07, 8.03 and 12.27 mmol·L ^?1 for P. tricornutum and 7.48, 11.92 and 17.22 mmol·L ^?1 for S. costatum. All these results show that the effect of EMA on the growth of algae was species specific and mainly depended on IAD, which might be an important factor to influence algal growth.     

Microalgae cultivation and culture medium recycling by a two-stage cultivation system

Nutrients and water play an important role in microalgae cultivation. Using wastewater as a culture medium is a promising alternative to recycle nutrients and water, and for further developing microalgae-based products. In the present study, two species of microalgae, Chlorella sp. (high ammonia nitrogen tolerance) and Spirulina platensis (S. platensis, high growth rate), were cultured by using poultry wastewater through a two-stage cultivation system for algal biomass production. Ultrafiltration (UF) or centrifuge was used to harvest Chlorella sp. from the first cultivation stage and to recycle culture medium for S. platensis growth in the second cultivation stage. Results showed the two-stage cultivation system produced high microalgae biomass including 0.39 g·L^–1Chlorella sp. and 3.45 g·L^–1S. platensis in the first-stage and second-stage, respectively. In addition, the removal efficiencies of NH₄⁺ reached 19% and almost 100% in the first and the second stage, respectively. Total phosphorus (TP) removal reached 17% and 83%, and total organic carbon (TOC) removal reached 55% and 72% in the first and the second stage, respectively. UF and centrifuge can recycle 96.8% and 100% water, respectively. This study provides a new method for the combined of pure microalgae cultivation and wastewater treatment with culture medium recycling.

Open image in new window

     

Green chemistry approach to analysis of formic acid and acetic acid in aquatic environment by headspace water-based liquid-phase microextraction and high-performance liquid chromatography

A simple and totally organic-free (green) method, viz. headspace water-based liquid-phase microextraction combined with high-performance liquid chromatography-ultraviolet detection has been successfully developed for analysis of formic acid and acetic acid in environmental water samples. A microdrop of an aqueous solution of sodium hydroxide was suspended from the tip of a microsyringe needle over the headspace of the stirred sample solution containing the analytes at pH 1.0 for a given time. The microdrop was then retracted into the microsyringe, diluted with HPLC mobile phase, and injected to HPLC. Optimum efficiency has been achieved for: 3.0 µL NaOH microdrop (0.1 mol L^?1) exposed for 15 min over the headspace of an aqueous sample of 6.5 mL at 55 °C, containing 15% w/v of Na₂SO₄, adjusted to pH = 1.0 and stirred at 750 rpm. Under these conditions, enrichment factors of 162 and 187, limits of detection of 0.3 and 0.1 µg L^?1 (S/N = 3) with dynamic linear ranges of 1–500 and 0.5–500 µg L^?1 were obtained for formic acid and acetic acid, respectively. A reasonable repeatability (5.8% ≤ RSD ≤ 8.8%, n = 6) and satisfactory linearity (r² ≥ 0.997) illustrated the performance of the method.     

Impact of solids on biphasic biodegradation of phenanthrene in the presence of hydroxypropyl-<Emphasis Type="Italic">β</Emphasis>-cyclodextrin (HPCD)

The consequence of polycyclic aromatic hydrocarbons (PAHs) in the environment is of great concern. The hydrophobic properties of PAHs significantly impact phase distribution causing limited bioavailability. Enhanced biodegradation has been extensively carried out by surfactants and the redeployment effect was recognized. However, the quantitative relationship concerning the impact of solids was rarely reported. A batch of biphasic tests were carried out by introducing Mycobacterium vanbaalenii PYR-1 and hydroxypropyl-β-cyclodextrin (HPCD) into a mixture of phenanthrene solution and various glass beads (GB37-63, GB105-125, and GB350-500). The comparative results demonstrated that HPCD had little effect on microbial growth and was not degradable by bacterium. A model was proposed to describe the biodegradation process. The regression results indicated that the partition coefficient k _d (1.234, 0.726 and 0.448 L·g^?1) and the degradation rate k (0 mmol·L^?1: 0.055, 0.094, and 0.112; 20 mmol·L^?1: 0.126, 0.141, and 0.156; 40 mmol·L^?1: 0.141, 0.156 and 0.184 d^?1) were positively and negatively correlated with the calculated total surface area (TSA) of solids, respectively. Degradation enhanced in the presence of HPCD, and the enhancing factor f was calculated (20 mmol·L^?1: 15.16, 40.01, and 145.5; 40 mmol·L^?1: 13.29, 37.97, and 138.4), indicating that the impact of solids was significant for the enhancement of biodegradation.     

Extensive cross-disciplinary analysis of biological and chemical control of Calanus finmarchicus reproduction during an aldehyde forming diatom bloom in mesocosms

Egg and faecal pellet production and egg hatching success of the calanoid copepod Calanus finmarchicus were monitored over a period of 14?days (14?C28 April, 2008) while fed water from 4 differently treated mesocosms and ambient water. Two of the mesocosms used were inoculated with the polyunsaturated aldehyde (PUA)-producing diatom Skeletonema marinoi, while 2 received only nutrient additions with or without silica. The mesocosms developed blooms of S. marinoi, mixed diatoms or the haptophyte Phaeocystis pouchetii, respectively. Faecal pellet production of C. finmarchicus increased with increasing food availability. Egg production increased with time in all mesocosms to a maximum single female production of 232 eggs female^?1?day^?1 (average of 90 eggs female^?1?day^?1) and followed the development of ciliates and P. pouchetii, but was not affected by the observed high (up to 15?nmol?L^?1) PUA production potential of the phytoplankton. The hatching success of the eggs produced on the mesocosm diets was high (78?C96%) and was not affected by either aldehydes in the maternal diet or exposure to the dissolved aldehydes in the water.     

Macrozoobenthic assemblages in relation to environments of the Yangtze-isolated lakes

Eutrophication can shift lakes from a clear, macrophyte-dominated state to a turbid, algae-dominated state, and different habitat condition supports different fauna. Macrozoobenthos are good indicators of water environment, and studies on macrozoobenthic assemblage characteristics can help us to know which state a lake is in, thus provide the basis for its eutrophication control. In this study, a systematic investigation on macrozoobenthos was conducted in 17 Yangtze-isolated lakes to explore the macroecological laws of macrozoobenthic assemblages. Detrended correspondence analysis (DCA) revealed that variance of benthic assemblage structure occurred in two types of lakes. In macrophytic lakes, altogether 51 taxa of macrozoobenthos were identified. The average density and biomass of total macrozoobenthos were 2231 individuals·m^?2 and 1.69 g dry weight·m^?2, respectively. Macrozoobenthic assemblage was characterized by dominance of scrapers (i.e. gastropods). In algal lakes, altogether 20 taxa of macrozoobenthos were identified. The average density and biomass of total macrozoobenthos were 2814 individuals·m^?2 and 1.38 g dry weight·m^?2, respectively. Macrozoobenthic assemblage was characterized by dominance of collector-gatherers (i.e. oligochaetes). Wet biomass of submersed macrophytes (B _Mac) and phytoplankton chlorophyll a concentration (Chl a) were demonstrated as the key factor structuring macrozoobenthic assemblages in macrophytic and algal lakes, respectively.     

Biodegradation of carbofuran in sequencing batch reactor augmented with immobilised Burkholderia cepacia PCL3 on corncob

The performance of sequencing batch reactors (SBRs) augmented with immobilised Burkholderia cepacia PCL3 on corncob for biodegradation of carbofuran in basal salt medium (BSM) was studied. A 2.0-L SBR with a working volume of 1.5 L was operated for a total cycle of 48 h, consisting of 1.0 h fill phase, 46 h react phase and 1.0 h decant phase. The initial pH of the feed medium was 7.0. Air was fed into the reactor at a controlled flow rate of 600 mL·min ^?1. The effect of hydraulic retention time (HRT) (14 to 6 days) on carbofuran-degradation efficiency was investigated at a carbofuran concentration in the feed medium of 20 mg·L ^?1. The shortest HRT resulting in complete degradation of carbofuran was 8 days. At 75% of the optimum HRT (6 days), the effects of biostimulation using organic amendments, i.e. molasses, cassava pulp, rice bran and spent yeast, and the effect of carbofuran concentration in the feed medium (20–80 mg·L ^?1) were investigated. The optimum conditions for SBRs were an initial carbofuran concentration of 40 mg·L ^?1 and 0.1 g·L ^?1 of rice bran as a biostimulated amendment. Complete degradation of carbofuran with a first-order kinetic constant (k ₁) of 0.044 h^?1 was achieved under these optimum conditions.     

Effect of waterborne boron and molybdenum on survival,growth and feed intake of Indian major carp,Cirrhinus mrigala (Hamilton)

The effect of either boron (B) or molybdenum (Mo) on survival, growth and feed intake of Indian major carp, Cirrhinus mrigala (Hamilton), advanced fry was studied in two separate experiments. Survival rates of C. mrigala fry (2.78±0.14 g) following 50 days’ exposure to B at 0.01 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 were 100% at all concentrations except 8.0 mg·L ^?1 where the survival rate 87.5±7.5%. We observed 100% survival of mrigala fry at all concentrations of Mo, 0.02 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1. Both B and Mo at 0.5 mg·L ^?1 showed significantly (p<0.05) higher growth of the fish compared with control and other concentrations. B exposure at 1.0, 2.0 and 4.0 mg·L ^?1 had no significant effect on growth rate, whereas at 8.0 mg B·L ^?1 growth of the fish almost ceased. Mo exposure at 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 caused no significant effect on growth rate of the fish compared to control. Both B and Mo at all concentrations had no significant effect on feed intake of the fish compared with control, except at the highest concentration of boron (8.0 mg·L ^?1).     

Concentrations and classification of HCHs and DDTs in soil from the lower reaches of the Jiulong River, China

Soil is an important source to other environmental media and organisms for organochlorine pesticides (OCPs) bioaccumulation. Twenty-four representative surface soil samples were collected from the lower reaches of the Jiulong River, China, in 2009. The concentrations of hexachlorocyclohexane isomers (HCHs) ranged from 0.38 to 39.52 ng·g^?1, with a mean value of 9.51 ng·g^?1. The concentrations of dichlorodiphenyltrichloroethanes (DDTs) and their metabolites were within the ranges of 0.94–700.99 ng·g^?1, with a mean value of 71.17 ng·g^?1. The concentrations of HCHs and DDTs in the soil were lower than the first grade level (50 ng·g^?1) of the Chinese Environmental Quality Standard (GB15618-1995). Hierarchical Cluster Analysis (HCA) and Pearson’s bivariate Correlations Analysis (PCA) were used to analyse the distribution and contamination levels of OCPs in this region. The results showed that DDTs were the major contaminants and there were no significant correlations between various OCPs concentrations and the total organic carbon (TOC) contents. A significant positive correlation was observed between HCHs and DDTs (p<0.01), which indicates that HCHs and DDTs may have similar sources and fate in the study area.     

Sediment load and timing of sedimentation affect spore establishment in Macrocystis pyrifera and Undaria pinnatifida

Although the frequency and magnitude of sedimentation often varies across coastal landscapes creating patches with different mean sediment loads, duration of sedimentation and rates of sediment resuspension, few studies have documented the emergent effects of spatio-temporal variability in sedimentation. Here, we conducted two laboratory experiments to evaluate such effects on the establishment of Macrocystis pyrifera and Undaria pinnatifida spores. In the first experiment, spore establishment was significantly affected by sediment load (the effective dose required for a 40 % reduction in establishment ranged between 16 and 60 mg sediment l^?1) and sediment regime (relative sedimentation occurring before spore settlement, ~3 times more sediment was required for 20 % reduction in spore establishment when sedimentation occurred after spore settlement). The second experiment demonstrated that the effects of sediment depended on sediment load (spore establishment was 2–4 times greater when sediment load was 200 mg l^?1 relative to 400 mg l^?1), variability in sedimentation (spore establishment was 1.36 times greater with variable than fixed sediment loads), repeated pulses of sedimentation (pulsed sedimentation decreased spore establishment by 59–91 % relative to a single sedimentation event) and timing of sedimentation relative to spore settlement (sedimentation before spore settlement decreased establishment by 51–95 % relative to sedimentation after spore settlement). These results have important implications for ecologists and resource managers attempting to predict the consequences of sedimentation, suggesting that it is not only important to consider sediment load, but also fine-scale temporal variability in sedimentation relative to key life-history events of the impacted organisms.