Isolation of the stable fraction (the core) of the humic acid

Humic acid consists of a recalcitrant (unhydrolysed fraction) (the core) and labile (hydrolysable fraction) fraction. Core-humic acid (core-HA) isolation was performed by treating source material with apolar and polar solvents (organic solvents+acid hydrolysis) before alkaline extraction. Leonardite, soil Ah horizont and dry blood were chosen for this study because of their different origin and degree of humification. Chemical analysis (elemental analysis, total acidity, E(4):E(6)), spectroscopic analysis (DRIFT and (1)H NMR), and complete mass balance were used to investigate the effect of purifying humic acids. The results obtained showed that purification produced a slight modification of Leonardite humic acids as was expected for these highly humified organic matrices. On the other hand, about 500 g kg(-1) of soil humic acids were lost by purification. The fractions lost mainly consisted of carbohydrates. Dry blood showed the presence of humic acids that contrasted with its origin, thus indicating the limitations of the common analytical methods used for HA extraction. Nevertheless, in practice, purification caused the complete disappearance (914 g kg(-1) of HA was lost) of these HAs. The results obtained in this work suggest that the HA fraction isolated (named core-HA) effectively represents the HA structure proposed by the existing literature, since the purification proposed was able to eliminate the adsorbed organic molecules (interference materials) coating the HA structure.     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Effects of sensitizers on the photodegradation of the systemic fungicide triadimenol

The photochemical behaviour of triadimenol (1) under various conditions has been examined. Significant degradation is obtained only in the presence of electron-acceptor sensitizers as 9,10-dicyanoanthracene or 2,4,6-triphenylpyrylium tetrafluoroborate, and long irradiation times are required. 1H-1,2,4-Triazole (2), 4-chlorophenyl formate (3), 4-chlorophenol (4), 1-(4-chlorophenoxy)-3,3-dimethyl-1-(1H-1,2,4-triazol-1-yl)butan-2-one (5), 4-chlorophenyl 2,2-dimethylpropanoate (6) and 4-chlorobenzoic acid (7) were identified as photoproducts by NMR and GC-MS.     

Performance of the supported copper oxide catalysts for the catalytic incineration of aromatic hydrocarbons

A fixed bed reactor was used to assess the catalytic incineration of toluene by various transition-metal oxide species supported on gamma-Al(2)O(3). CuO/gamma-Al(2)O(3) was found to be the most active of seven catalysts investigated. The CuO species, with a Cu content of 5% (wt), was hence used with four different supports (CeO(2), gamma-Al(2)O(3), TiO(2) and V(2)O(5)) in order to define the optimal combination. Results of the catalytic incineration of toluene, X-ray diffraction (XRD) analysis, oxygen-temperature programmed desorption (O(2)-TPD), toluene-temperature programmed desorption (toluene-TPD) and hydrogen-temperature programmed reduction (H(2)-TPR) showed that CuO/CeO(2) was the most active catalyst, followed by CuO/gamma-Al(2)O(3). The activity of CuO/CeO(2) with respect to the VOC molecule was observed to follow this sequence: toluen>p-xylene>benzene. The addition of water vapor or CO(2) significantly inhibited the activity of the CuO/CeO(2) and CuO/gamma-Al(2)O(3) catalysts. The inhibiting effect of both was reversible for CuO/gamma-Al(2)O(3). For CuO/CeO(2), the inhibiting effect of CO(2) was reversible and even insignificant at a higher temperature (220 degrees C), but the effect of H(2)O vapor was somewhat irreversible at lower incineration temperatures (220 degrees C). For complete oxidation of toluene, the required reaction temperature increased with gas hourly space velocity (GHSV) and toluene inlet concentration.     

Partitioning of hydrogen peroxide between the gas and liquid phases in the presence of surfactant

Gas-liquid phase partitioning is a key physical property that can predict the environmental fate of a compound between two phases. Several environmental factors have been known to affect the gas-liquid phase partitioning. We investigated the influence of surfactant on the gas-liquid phase partitioning of hydrogen peroxide (H(2)O(2)). The surfactant used was ammonium perfluorooctanoate (APFO). H(2)O(2) solution containing the surfactant was equilibrated in a closed system and gas phase H(2)O(2) concentration was measured by the peroxyoxalate chemiluminescence (PO-CL) method. Gas phase H(2)O(2) concentrations remained constant below the critical micelle concentration (CMC) and increased linearly with surfactant concentration above the CMC, which indicated that surfactant micelles influenced the gas-liquid phase partitioning of H(2)O(2). This result showed that H(2)O(2)-micelle interactions are less favorable than H(2)O(2)-H(2)O interactions. Surfactant monomers did not affect the gas-liquid phase partitioning of H(2)O(2) due to the absence of micelles. Solvent (methanol) effect was also investigated and showed that gas phase H(2)O(2) concentrations increased with the addition of solvent. This indicated the unfavorable interaction of H(2)O(2) with hydrophobic medium compared to hydrophilic one. It is consistent with the result that H(2)O(2)-micelles has a weaker interaction than H(2)O(2)-water because surfactant micelles are hydrocarbon-like organic phase rather than aqueous phase.     

Photolysis of nonylphenol ethoxylates: the determination of the degradation kinetics and the intermediate products

The photolysis of nonylphenol ethoxylates with an average oligomers length of ten ethoxylate units (NPEO(10)) in aqueous solution under UV, as well as the influence of humic acid (HA) on the photolysis was studied. A 125W high-pressure mercury lamp was employed as the light source. The intermediate products from the photolysis were determined by LC-MS. The results indicated that NPEO(10) underwent direct photolysis upon exposed to UV. The degradation pathway was complex. Besides the generally proposed degradation pathway of ethylene oxide (EO) side chains shortening, the oxidation of alkyl chain and EO chain led to intermediates having both a carboxylated (as well as carbonylated) ethoxylate and alkyl chain of varying lengths. The hydrogenation of benzene ring was also detected. The kinetics data showed that the first order reaction kinetics could be well used to describe the kinetics of NPEO(10) degradation. In the presence of dissolved organic matter by HA addition, the performance of NPEO(10) photodegradation was reduced. The photolysis rate decreased with increased HA concentration.     

Modeling the reaction kinetics of Fenton's process on the removal of atrazine

The degradation of pesticide, atrazine (ATZ), 2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine, by Fenton's reagent (FR) was investigated as a function of reagents' concentrations and ratios in a batch reactor. The degradation of ATZ was effectively achieved by hydroxyl radicals, which were generated in the FR process. The decay rates of ATZ and the oxidation capacities of FR were found to depend on the concentrations of hydrogen peroxide and ferrous ion. The removal kinetics of ATZ are initiated by a rapid decay and then followed by a much slower one. After an extended reaction time (5-10 min), the reactions ceased because the Fe(II) and H(2)O(2) were consumed and would be deactivated in the process. A mathematical model was successfully developed to describe the two-stage reaction kinetics by using two simple but critical parameters: the initial ATZ decay rate and the final oxidation capacity of Fenton's process. In general, higher [Fe(II)] or H(2)O(2) concentrations result in faster initial decay rate and higher oxidation capacity. However, the oxidation capacity is more sensitive to the initial [Fe(II)] due to the presence of side reactions as discussed in the paper.     

Chlorophyll, carotenoids and the activity of the xanthophyll cycle

Clone spruce trees (Picea abies L. Karst.) were exposed in the Hohenheim open-top chambers to low levels of O(3) and SO(2), singly and in combination, and to simulated precipitation of two pH treatments (Seufert et al., this volume). At the end of five years of continuous exposure, needles from the 13-year-old trees were sampled and analysed for pigments content by means of HPLC (high pressure liquid chromatography). The pigment content was determined for three needle age classes. Chlorophyll a content, measured on a dry weight basis, was similar for all needle age classes in the control chambers receiving only the simulated rain treatments at pH 5.0 or 4.0, and the chamber receiving O(3) and the rain treatment at pH 4.0. Also, no differences were noted in one-year-old needles in the chambers with SO(2) and simulated precipitation at pH 4.0 and SO(2) + O(3) and simulated precipitation at pH 4.0. Reductions of approximately 10 and 35% were measured in two-year-old needles from the chambers with SO(2) and precipitation at pH 4.0, and SO(2) + O(3) and precipitation at pH 4.0. The three-year-old needles from these chambers had 40% lower chlorophyll a content compared to the control chambers. No treatment effects were seen on the molar ratios of chlorophyll b, the carotenes, lutein, neoxanthin, and the sum of carotenoids involved in the xanthophyll cycle, violaxanthin + antheraxanthin + zeaxanthin, to chlorophyll [Formula: see text]. The xanthophyll cycle, assayed in one-year-old needles under defined light conditions (520 microE m(-2) s(-1), while light) was active in all samples. Needles from the control chambers and the chambers with SO(2) and with O(3) behaved similarly and differed from the SO(2) + O(3) treated needles by a 50% higher zeaxanthin content reached under light.     

Challenge of the Future

ABSTRACT

The separation of Cr(III) from collagen in chromium-tanned leather (wet-blue) is achieved by a combination of the protein (collagen) stabilization (protective cross-linking) and a subsequent labilization of the Cr(III) species bound to the protein. During the separation collagen retains the tertiary triple helical and higher (fibril) structures. The model proposed for the protective cross-linking involves inter- rather than intramolecular bridging, that is, a supramolecular bridging. The process of chromium removal takes place in a restricted aqueous environment, and it can be characterized as semihomogeneous or semiheterogeneous.     

An investigation into the acid content of aerosols in the ambient air at the Taj Mahal, Agra

A chemical analysis of suspended particulate matter (SPM) collected near the world famous Taj Mahal monument at Agra has been carried out. SPM samples collected on glass fibre filters were analysed for water-soluble sulphate, nitrate, chloride and ammonium ions. The data were derived from over 200 samples (each of 24 h), collected continuously during the winter periods (October through to March) of 1984-1985 and 1985-1986. The SO(4)(2-) and NO(3)(-) components are acidic in nature causing corrosion and effects on visibility, and so were studied in more detail. Mean values for SO(4)(2-) and NO(3)(-) derived from two-year data are 7.2 microg m(-3) and 8.2 microg m(-3), respectively. The SO(4)(2-)/SO(2) and NO(3)(-)/NO(2) ratiosobserved indicate faster conversion of SO(2) to SO(4)(2-) than NO(2) to NO(3)(-), the maximum levels being in January. Thus, both SO(4)(2-) and NO(3)(-) results appear to offer more promising indices of air quality than do SPM data alone.     

Denitrification in the river estuaries of the northern Baltic Sea

Estuaries have been suggested to have an important role in reducing the nitrogen load transported to the sea. We measured denitrification rates in six estuaries of the northern Baltic Sea. Four of them were river mouths in the Bothnian Bay (northern Gulf of Bothnia), and two were estuary bays, one in the Archipelago Sea (southern Gulf of Bothnia) and the other in the Gulf of Finland. Denitrification rates in the four river mouths varied between 330 and 905 micromol N m(-2) d(-1). The estuary bays at the Archipelago Sea and the Gulf of Bothnia had denitrification rates from 90 micromol N m(-2) d(-1) to 910 micromol N m(-2) d(-1) and from 230 micromol N m(-2) d(-1) to 320 micromol N m(-2) d(-1), respectively. Denitrification removed 3.6-9.0% of the total nitrogen loading in the river mouths and in the estuary bay in the Gulf of Finland, where the residence times were short. In the estuary bay with a long residence time, in the Archipelago Sea, up to 4.5% of nitrate loading and 19% of nitrogen loading were removed before entering the sea. According to our results, the sediments of the fast-flowing rivers and the estuary areas with short residence times have a limited capacity to reduce the nitrogen load to the Baltic Sea.     

Kinetics of the reduction of hexavalent chromium with the brown seaweed Ecklonia biomass

The dead biomass of the brown seaweed, Ecklonia sp., is capable of reducing toxic Cr(VI) into less toxic or nontoxic Cr(III). However, little is known about the mechanism of Cr(VI) reduction by the biomass. The objective of this work was to develop a kinetic model for Cr(VI) biosorption, for supporting our mechanism. The reduction rate of Cr(VI) increased with increasing total chromate concentration, [Cr(VI)], and equivalent concentration of organic compounds, [OCs], and decreasing solution pH. It was found that the reduction rate of Cr(VI) was proportional to [Cr(VI)] and [OCs], suggesting the simple kinetic equation -d[Cr(VI)]/dt=k[Cr(VI)][OCs]. When considering the consumption of organic compounds due to the oxidation by Cr(VI), an average rate coefficient of 9.33 (+/-0.65)microM(-1)h(-1) was determined, at pH 2. Although the function of the pH could not be expressed in a mechanistic manner, an empirical model able to describe the pH dependence was obtained. It is expected that the developed rate equation could likely be used for design and performance predictions of biosorption processes for treating chromate wastewaters.     

Strontium isotopic compositions of dissolved and suspended loads from the main channel of the Yangtze River

The concentrations of Sr and (87)Sr/(86)Sr isotopic ratios have been measured in the dissolved loads from the main channel of the Yangtze River. The result shows that the Yangtze River mainstream water has considerably higher Sr concentration (202-330 microg kg(-1)) and slightly lower (87)Sr/(86)Sr ratio (0.7098-0.7108) than the global average runoff values of dissolved Sr (78 microg kg(-1)) and (87)Sr/(86)Sr ratio (0.7119). The (87)Sr/(86)Sr values of 0.7098-0.7108 in river waters result from the intense weathering of carbonate and evaporate rocks that enriched in the Yangtze River drainage basin. The calculated result based on the end-member mixing model shows that about 91% of total dissolved Sr are derived from the weathering of carbonate and evaporate rocks and the other 9% derived from the weathering of silicate rock. The Yangtze River transports about 1.86 x1 0(11)g yr(-1) (2.12 x 10(9)mol yr(-1)) of dissolved Sr annually to the East China Sea, with an average (87)Sr/(86)Sr of 0.7108. The calculated "(87)Sr(excess) flux" of the Yangtze River is about 2.12 x 10(7)mol yr(-1), indicating the important impact on seawater Sr isotope evolution. The measured (87)Sr/(86)Sr ratios of suspended particulate matters in the Yangtze River water ranging from 0.7178 to 0.7252, are about 0.015 higher than that of corresponding dissolved loads, reflecting more important contribution of silicate particles in suspended particulate matters and preferential dissolution of carbonate rocks during basin weathering.     

Absorption and metabolism of the chiral isomers of fonofos in the corn and cotton plant

Root absorption of chiral phenyl-35S-fonofos in cotton and corn plants revealed stereoselective differences between the two enantiomers. (S)p-Fonofos was absorbed at a faster initial rate and to a greater extent than the (R)p enantiomer in both plant species. Approximately 40% and 62% of the applied radioactivity was absorbed into the cotton plant 12 hr after application of (R)p- and (S)p-fonofos, respectively. In the corn plant, approximately 25% and 63% of the applied (R)p- and (S)p-fonofos was absorbed in the first 12 hrs. Little qualitative or quantitative difference in plant translocation between fonofos enantiomers was observed. (R)p-fonofos was found to be metabolized to a greater extent than the (S)p enantiomer in both cotton and corn plants.     

An evaluation of the green chelant EDDS to enhance the stability of hydrogen peroxide in the presence of aquifer solids

Hydrogen peroxide is a widely used in situ chemical oxidation reagent which relies on catalysts to generate the suite of reactive species that are required to aggressively remediate contaminated soils and groundwater. In the subsurface environment these catalysts are usually transition metals that are added to the injected solution, or are naturally occurring. Chelating agents are widely used to maintain an adequate dissolved transition metal concentration in near-neutral pH conditions; however, they can also be used to improve the persistence of H(2)O(2) in situations when the aquifer solids have sufficient transition metal content. Ethylenediamine tetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) have been considered to be the most effective chelants and therefore are the most widely used. While previous research efforts have focused on the chelating agent efficiency, the long-term fate of these chelants in the natural subsurface environment is a concern since both EDTA and NTA are non-readily biodegradable. The focus of this investigation was to evaluate the potential of using the environmentally friendly or green chelating agent ethylenediaminedisuccinate (EDDS) as an alternative to EDTA or NTA to suppress the catalytic activity of naturally-occurring transition metals. A series of batch reactor and column experiments were performed using five different aquifer materials and the results demonstrate that EDDS has a comparative chelating efficiency to that of EDTA. The addition of EDDS was able to reduce the H(2)O(2) decomposition rates in the presence of the aquifer materials used in this investigation by 24-97% in well-mixed batch systems, and by 20% and 38% in the column trials where H(2)O(2) was detected in the effluent.     

Influence of the very polluted inputs of the Tinto-Odiel system on the adjacent littoral sediments of southwestern Spain: a statistical approach

A spatial and temporal analysis (period 1990-2003) of 15 sampling points distributed along the southwestern Spanish coast permits to delimitate the influence area of the extremely polluted discharges coming from the Tinto-Odiel system in the bottom sediments of the adjacent littoral area. As, Cu, Pb and Zn are the main heavy metals transported by the freshwater runoffs toward the shallow shelf and present very high negative (r < -0.7) and significant (p < 0.001) correlations with the distance to the estuarine mouth. The statistical analysis (index of geoaccumulation, Pearson correlation matrix, cluster analysis) of their concentrations in the littoral sediments located between the Guadiana and Guadalquivir mouths delimitates three zones: (a) Zone 1 (from the estuarine mouth to 6 km to the east), characterized by moderate to strongly polluted bottom sediments and main responsible of the mean annual variations of the former heavy metals in the area studied; (b) Zone 2 (from 21.2 km to the west to 29 km to the east), characterized by moderate pollution levels; and (c) Zone 3, located near the Guadiana and Guadalquivir mouths, with very low As-Cu-Pb contents and unpolluted to moderately levels of Zn due to urban sewages or the presence of local low mobility areas for this element.     

Development of a multi-factor model for predicting the effects of ambient ozone on the biomass of white clover

Results are presented from the UN/ECE ICP Vegetation (International Cooperative Programme on effects of air pollution on natural vegetation and crops) experiments in which ozone(O(3))-resistant (NC-R) and -sensitive (NC-S) clones of white clover (Trifolium repens cv. Regal) were exposed to ambient O(3) episodes at 14 sites in eight European countries in 1996, 1997 and 1998. The plants were grown according to a standard protocol, and the forage was harvested every 28 days for 4-5 months per year by excision 7 cm above the soil surface. Biomass ratio (NC-S/NC-R) was related to the climatic and pollutant conditions at each site using multiple linear regression (MLR) and artificial neural networks (ANNs). Twenty-one input parameters [e.g. AOT40, 7-h mean O(3) concentration, daylight vapour pressure deficit (VPD), daily maximum temperature] were considered individually and in combination with the aim of developing a model with high r(2) and simple structure that could be used to predict biomass change in white clover. MLR models were generally more complex, and performed less well for unseen data than non-linear ANN models. The ANN model with the best performance had five inputs with an r(2) value of 0.84 for the training data, and 0.71 for previously unseen data. Two inputs to the model described the O(3) conditions (AOT40 and 24-h mean for O(3)), two described temperature (daylight mean and 24-h mean temperature), and the fifth input appeared to be differentiating between semi-urban and rural sites (NO concentration at 17:00). Neither VPD nor harvest interval was an important component of the model. The model predicted that a 5% reduction in biomass ratio was associated with AOT40s in the range 0.9-1.7 ppm x h (microl l(-1) h) accumulated over 28 days, with plants being most sensitive in conditions of low NO(x), medium-range temperature, and high 24-h mean O(3) concentration.     

Assessment of the environmental significance of heavy metal pollution in surficial sediments of the River Po

The magnitude and ecological relevance of metal pollution of the middle Po river deriving from the River Lambro tributary was investigated by applying different (complementary) sediment quality assessment approaches: (1) comparisons of concentrations with regional reference data, and (2) comparisons with consensus-based sediment quality guidelines (SQGs), as well as by investigations of the partitioning patterns of target heavy metals (Cd, Cu, Ni, Pb, Zn). Total metal concentrations in the surficial sediments revealed significant pollution inputs on the whole river stretch investigated, with a distinct peak at the inlet of the River Lambro. Based on the geoaccumulation index of target heavy metals, the middle reach of River Po has to be considered as moderately polluted with Cd (1相似文献   

Effects of perfluoroalkyl acids on the function of the thyroid hormone and the aryl hydrocarbon receptor

Perfluoroalkyl acids (PFAAs) are perfluorinated compounds that widely exist in the environment and can elicit adverse effects including endocrine disruption in humans and animals. This study investigated the effect of seven PFAAs on the thyroid hormone (TH) system assessing the proliferation of the 3,3′,5-triiodo-l-thryonine (T3)-dependent rat pituitary GH3 cells using the T-screen assay and the effect on the aryl hydrocarbon receptor (AhR) transactivation in the AhR-luciferase reporter gene bioassay. A dose-dependent impact on GH3 cells was observed in the range 1?×?10^?9–1?×?10^?4 M: seven PFAAs (perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS), perfluorooctanoic acid, perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluoroundecanoic acid (PFUnA), and perfluorododecanoic acid (PFDoA)) inhibited the GH3 cell growth, and four PFAAs (PFOS, PFHxS, PFNA, and PFUnA) antagonized the T3-induced GH3 cell proliferation. At the highest test concentration, PFHxS showed a further increase of the T3-induced GH3 growth. Among the seven tested PFAAs, only PFDoA and PFDA elicited an activating effect on the AhR. In conclusion, PFAAs possess in vitro endocrine-disrupting potential by interfering with TH and AhR functions, which need to be taken into consideration when assessing the impact on human health.     

Photolytic degradation of hexacyanoferrate (II) in aqueous media: the determination of the degradation kinetics

Upon exposure to ultraviolet (UV) radiation, non-toxic hexacyanoferrate (II) (Fe(CN)6(-4)) undergoes direct photolysis, resulting in the liberation of toxic free cyanide (HCN,CN-). This experimental study employed manipulation of several environmental parameters with the objective of characterizing their effects on the photolysis rate of hexacyanoferrate (II). The photolysis rate was not affected significantly by varying (1) the initial hexacyanoferrate (II) concentration (from 10 to 400 microg/l as total CN), (2) the solution turbidity (kaolin clay concentration from 0 to 5 mg/l), and (3) pH (from pH 4 to 12). Parameters that exhibited a significant effect (significance level, alpha < 0.05) on the photolysis rate included the intensity of incident ultraviolet radiation (from 30 to 110 micromol/m2s photons) and the concentration of dissolved organic matter (color) from added humic acid (from 0 to 10 mg/l). In addition, observations made by spiking both deionized and natural waters demonstrated that the rate of hexacyanoferrate (II) photolysis (1) significantly exceeded the rate of free cyanide formation from photolysis and (2) exhibited significant retardation that directly depended on the free cyanide concentration in solution. The hexacyanoferrate (II) photolysis data were consistent with a simple, semi-empirical kinetic model that included the reversible formation of at least one cyanoferrate intermediate. The reverse reaction, in turn, behaved in a manner that was consistent with a second order rate law with respect to free cyanide concentration.