Ecotoxicological impact assessment of the brine discharges from a desalination plant in the marine waters of the Algerian west coast,using a multibiomarker approach in a limpet,Patella rustica

The aim of our study is to evaluate the impact of Bousfer desalination plant brine discharges on the Algerian west coast, on a natural population of the marine gastropod mollusc Patella rustica. The effects of a chronic exposure to such discharges are complex to understand due to the combined effects of environmental physico-chemical parameters (e.g., high salinity) and different pollutants that can modulate the physiological responses of this species to stress. In this context, we assessed the biological effects in a marine species P. rustica, by a multibiomarker approach that provided information on the health status of organisms in response to such an environmental stress. We measured biomarkers in the whole soft tissues of limpets as indicators of neurotoxicity (AChE activity), oxidative stress (CAT, SOD, GR, and GPx activities), biotransformation (GST), oxidative damage (LPO through TBARS levels), and genotoxicity (CSP 3-like activity). In parallel, hydrological parameters were measured in the Bay of Oran, at four selected sites: site H considered as a “hotspot,” located at Bousfer desalination plant; two other sites E and W, at the east and the west of H respectively; finally, site R “reference” located in Madragh, which is considered as a remote clean site. Our analyses revealed that the activities of antioxidant defense enzymes reached the highest levels in P. rustica collected from site H. The activation of antioxidant defense system in these organisms translated the alteration of their status health, reflecting a level of environmental disruption generated by the desalination plant brine discharges and the high salinity in this area. We also observed that the tissues of limpets collected from site H as well as the two other sites, E and W, had undergone molecular damage, confirmed by the high levels of CSP 3-like activity. This damage resulted from chronic exposure to environmental conditions, potentially genotoxic, due to the desalination plant discharges. The present results indicate the adverse impact of brine effluents from desalination plants on marine fauna and suggest the need for a more consistent approach to environmental management of brine discharges.

     

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

     

The use of vegetation,bees, and snails as important tools for the biomonitoring of atmospheric pollution—a review

The continuous discharge of diverse chemical products in the environment is nowadays of great concern to the whole world as some of them persist in the environment leading to serious diseases. Several sampling techniques have been used for the characterization of this chemical pollution, although biomonitoring using natural samplers has recently become the technique of choice in this field due to its efficiency, specificity, and low cost. In fact, several living organisms known as biomonitors could accumulate the well-known persistent environmental pollutants allowing their monitoring in the environment. In this work, a review on environmental biomonitoring is presented. The main sampling techniques used for monitoring environmental pollutants are first reported, followed by an overview on well-known natural species used as passive samplers and known as biomonitors. These species include conifer needles, lichen, mosses, bees and their byproducts, and snails, and were widely used in recent research as reliable monitors for environmental pollution.

     

污染物与蒙脱石层间域的界面反应及其环境意义

系统地评述了无机、有机阳离子、农药分子、细菌等环境污染物在蒙脱石层间域中的吸附、脱附、氧化还原、催化降解等界面反应机理 ,并指出它们的环境化学行为对环境的影响和意义     

Studies on Biodegradation of Nicotine by Arthrobacter sp. Strain HF-2

A nicotine-degrading bacterium, strain HF-2, was isolated from tobacco waste-contaminated soil and identified as a member of Arthrobacter sp. based on morphology, physiological tests, 16S rDNA sequence and phylogenetic characteristics. At thermal denaturation test indicated that the G + C mol% of strain HF-1 was 63.5. The relationship between the growth of the isolate and the nicotine degradation suggested that strain HF-2 could utilize nicotine as sole sources of carbon, nitrogen and energy. Blue pigment was observed during the nicotine degradation by strain HF-2. The isolate grew well at 20 to 33°C, initial pH 6.5 to 8.0 and 0.5 to 2.0 g L^?1 of nicotine concentration in the nicotine inorganic salt media. The maximum growth and nicotine degradation occurred at 30°C, initial pH 7.0 and 0.7 g·L^?1 of nicotine concentration in media under natural incubation condition. Strain HF-2 could degrade 100% of nicotine under the optimized incubation conditions for 43 h. The concentrations of nicotine were monitored by high performance liquid chromatography. This study demonstrates Arthrobacter sp. strain HF-2 had a great ability to degrade nicotine, and it may be available for the application to the bioremediation of environments contaminated by tobacco waste.     

Impact of composting strategies on the treatment of soils contaminated with organic pollutants

Chemical pollution of the environment has become a major source of concern. Studies on degradation of organic compounds have shown that some microorganisms are extremely versatile at catabolizing recalcitrant molecules. By harnessing this catabolic potential, it is possible to bioremediate some chemically contaminated environmental systems. Composting matrices and composts are rich sources of xenobiotic-degrading microorganisms including bacteria, actinomycetes and lignolytic fungi, which can degrade pollutants to innocuous compounds such as carbon dioxide and water. These microorganisms can also biotransform pollutants into less toxic substances and/or lock up pollutants within the organic matrix, thereby reducing pollutant bioavailability. The success or failure of a composting/compost remediation strategy depends however on a number of factors, the most important of which are pollutant bioavailability and biodegradability. This review discusses the interactions of pollutants with soils; look critically at the clean up of soils contaminated with a variety of pollutants using various composting strategies and assess the feasibility of using composting technologies to bioremediate contaminated soil.     

A spatial multicriteria model for determining air pollution at sample locations

Atmospheric pollution in urban centers has been one of the main causes of human illness related to the respiratory and circulatory system. Efficient monitoring of air quality is a source of information for environmental management and public health. This study investigates the spatial patterns of atmospheric pollution using a spatial multicriteria model that helps target locations for air pollution monitoring sites. The main objective was to identify high-priority areas for measuring human exposures to air pollutants as they relate to emission sources. The method proved to be viable and flexible in its application to various areas.

Implications:?Spatial multicriteria models provide a tool for air pollution management in urban areas. Analytic hierarchy process (AHP) modeling can help with the process of prioritizing monitoring site locations and minimizing costs.     

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

     

Enhancing mixed toluene and formaldehyde pollutant removal by Zamioculcas zamiifolia combined with Sansevieria trifasciata and its CO2 emission

Indoor air pollutants comprise both polar and non-polar volatile organic compounds (VOCs). Indoor potted plants are well known for their innate ability to improve indoor air quality (IAQ) by detoxification of indoor air pollutants. In this study, a combination of two different plant species comprising a C3 plant (Zamioculcas zamiifolia) and a crassulacean acid metabolism (CAM) plant (Sansevieria trifasciata) was used to remove polar and non-polar VOCs and minimize CO₂ emission from the chamber. Z. zamiifolia and S. trifasciata, when combined, were able to remove more than 95% of pollutants within 48 h and could do so for six consecutive pollutant’s exposure cycles. The CO₂ concentration was reduced from 410 down to 160 ppm inside the chamber. Our results showed that using plant growth medium rather than soil had a positive effect on decreasing CO₂. We also re-affirmed the role of formaldehyde dehydrogenase in the detoxification and metabolism of formaldehyde and that exposure of plants to pollutants enhances the activity of this enzyme in the shoots of both Z. zamiifolia and S. trifasciata. Overall, a mixed plant of Z. zamiifolia and S. trifasciata was more efficient at removing mixed pollutants and reducing CO₂ than individual plants.

     

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the “zero concept” of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.     

The tox is in the detail: technical fundamentals for designing,performing, and interpreting experiments on toxicity of microplastics and associated substances

Over the last 10 years, there has been a plethora of experimental studies estimating the potential of microplastic particles (MPs) to exert toxic effects in the environment, many specifically focusing on their postulated capacity to enhance the transfer of environmental pollutants into organisms after ingestion. Obviously, there is little to no consensus on appropriate experimental design, which is mainly owing to the novelty, the interdisciplinarity of the subject, and the complexity of parameters involved. This results in fundamental discrepancies regarding the materials applied, the approach for spiking MPs with pollutants, and the exact exposure scenario. Aiming for a non-chemist audience and providing illustrative, representative, and comparative examples, this review first outlines the theoretical essentials of processes involved in sorption. Also, it discusses the implications for designing experimental approaches using MPs and interpreting the results obtained under consideration of their relevance for environmental conditions. It may help to improve the interpretation of studies on MP toxicity already published, while also calling experimenters’ attention to various aspects important to consider when designing and performing environmentally relevant experiments with MPs.

     

Quantification and Analysis of Airborne Bacterial Characteristics in a Nursing Care Institution

ABSTRACT

Indoor air quality has become a critical issue because people spend most of their time in the indoor environment. The factors that influence indoor air quality are very important to environmental sanitation and air quality improvement. This study focuses on monitoring air quality, colony counts, and bacteria species of the indoor air of a nursing care institution. The regular colony counts in two different wards range from 55 to 600 cfu m^?3. Regression analysis results indicate that the bacterial colony counts have close correlation with relative humidity or carbon dioxide (CO₂) but not with carbon monoxide (CO) or ozone (O₃). Real-time PCR was used to quantify the bacterial pathogens of nosocomial infection, including Acinetobacter baumannii, Citrobacter freundii, Escherichia coli, Klebsiella pneumoniae, and methicillin-sensitive Staphylococcus aureus. The most abundant bacteria species in the air of the nursing care institution is E. coli.

IMPLICATIONS Indoor temperature, humidity, ventilation, accumulation of biological pollutants, and potential infection problems will seriously affect the indoor environments. Studying these factors is important to indoor environmental sanitation and air quality improvements. Results of using real-time PCR to evaluate the bacterial pathogens of nosocomial infection for a nursing care institution in Taiwan reveal that the main bacteria species existing in the indoor air is E. coli.     

Stream biodiversity and monitoring in North Central,Nigeria: the use of macroinvertebrate indicator species as surrogates

Indicator species (IS) have been employed in modern aquatic research for monitoring of environmental changes and evaluating the efficiency of environmental management procedures. In this study, we evaluated the possibility of developing surrogate indicator groups as tools for the conservation and management of the biodiversity of Northern Nigeria streams by surveying 15 streams in Niger state for benthic macroinvertebrates and environmental variables as data sets, over a period of 24 months (2016 and 2017). Samples were collected in two locations of reference and impacted sites for each of the streams surveyed. The statistically significant (P < 0.05; based on 1000 permutations) indicator species for each of the status classes (reference versus impacted) was identified using the indicator species analysis/indicator value (Indval) method. Canonical correspondence analysis (CCA) was used to evaluate the IS-environment relationships. Indicator value found fifteen species for the reference streams including Ephemeropteran (Bugilliesia sp., Tricorythus sp., Thraulus sp., Crassabwa sp.) and the Tricopteran (Leptonema sp.). Opposite, the Indval found seven (7) indicator species for the impacted streams, which included the Dipteran (Pentaneura sp., Tabanus sp.). Multivariate analysis revealed that species assemblage had wide dispersal patterns in relation to the sites for both status classes. CCA revealed that the reference and impacted indicator species responded to entirely different environmental factors, indicating their preference to particular environmental variables along the ecological gradients. While the indicator species of reference sites were associated with environmental predictors of good water quality such as high DO, increased flow, low conductivity, and low BOD, the indicator species of impacted sites were strongly related to environmental predictors of anthropogenic pollution, including low DO, high BOD, and increased nutrients concentrations. This study has provided a reference point and effective tool to monitor environmental changes, community, and ecosystem dynamics across the Northern Nigeria streams.

     

Effects of the lichen Peltigera canina on Cucurbita pepo spp. pepo grown in soil contaminated by DDTs

Lichens consisting of a symbiotic association of green algae or cyanobacteria and fungi are found in a variety of environmental conditions worldwide. Terricolous lichens, located in soils, affect the living and lifeless environment of the soil due to their effective secondary metabolite and enzymatic content. Terricolous lichens can increase the biological, chemical, and physical usefulness of soil. However, their effects in ensuring the bioavailability of contaminated soil are not known, especially on soil pollution caused by DDTs (p,p′-DDE, p,p′-DDD, p,p′-DDT). This research focuses on the effect of terricolous lichens on zucchini (Cucurbita pepo spp. pepo) grown in soil contaminated by DDTs, utilizing their secondary metabolite and enzymatic contents. Firstly, Peltigera canina, a terricolous lichen species, was added to soil contaminated by DDTs as powdered and intact thallus. After lichen addition to soil, zucchini was planted in. The oxidative stress and antioxidative enzyme activities of zucchini were measured. According to the results, P. canina treatments have a positive effect on the growth and development of zucchini, although oxidative stress was observed. Also, it was determined that powdered application had more effective results than intact thallus application.

     

Analysis of lipid peroxidation in animal and plant tissues as field-based biomarker in Mediterranean irrigated agroecosystems (Extremadura,Spain)

ABSTRACT

The development of field-based biomarkers can allow for a more reliable assessment of the exposure of organisms to pollutants. Different sampling sites, along two streams running through an irrigable agricultural area, were selected to evaluate the effect of agrochemical load on the measured endpoints. The levels of lipid peroxidation were evaluated in several organs of Procambarus clarkii. The same method was applied to leaves of two woody species. Determining levels of MDA (malonaldehyde) by thiobarbituric acid reactive substances assay allows measuring the levels of lipid peroxidation. Differences in lipid peroxidation levels were observed in P. clarkii individuals collected at different sites; however, the patterns varied depending on the organ (when accounting for variations due to sex). The use of a MDA-gills/MDA-hepatopancreas index allowed for discrimination between reference and polluted sites. Significant differences in oxidative damage between sites were found in the leaves of Quercus rotundifolia but not in Salix sp. The lipid peroxidation of crayfish organs and holm oak leaves as a suitable biomarker of environmental pollution deserves further investigation.     

Microplastics in aquatic environment: characterization,ecotoxicological effect,implications for ecosystems and developments in South Africa

Microplastics are small-size plastic piece scales (particles <?5 mm) in sediments and waters which interact with environment and organisms by various means. Microplastics are becoming a universal ecological concern since they may be a source of hazardous chemicals to marine organisms and environments. Recent research suggests microplastics could enable the transfer of hydrophobic aquatic pollutants or chemical additives to biota. Even though microplastic presence and interactions are recently being detected in marine and freshwater systems, the fate of microplastics is still very poorly understood. This literature review is a summary of the sources and transport of microplastics, their interactions with toxic chemicals and the methodologies for chemical quantification and characterization of microplastics. The environmental outcome and impact of microplastics in wastewater treatment plants were assessed as well as the trends and update on microplastic research in the South African aquatic ecosystem.

     

Phytoremediation to increase the degradation of PCBs and PCDD/Fs

Phytoremediation is already regarded as an efficient technique to remove or degrade various pollutants in soils, water and sediments. However, hydrophobic organic molecules such as PAHs, PCBs and PCDD/Fs are much less responsive to bioremediation strategies than, for example, BTEX or LAS. PCDD/Fs and PCBs represent 3 prominent groups of persistent organic pollutants that share common chemical, toxicological and environmental properties. Their widespread presence in the environment may be explained by their chemical and biological stability. This review considers their fate and dissipation mechanisms. It is then possible to identify major sinks and to understand biological activities useful for remediation. Public health and economic priorities lead to the conclusion that alternative techniques to physical treatments are required. This review focuses on particular problems encountered in biodegradation and bioavailability of PCDD/Fs and PCBs. It highlights the potential and limitations of plants and micro-organisms as bioremediation agents and summarises how plants can be used to augment bacterial activity. Phytoremediation is shown to provide some new possibilities in reducing risks associated with dioxins and PCBs.     

Gaseous pollutants emitted from a mechanical biological treatment plant for municipal solid waste: Odor assessment and photochemical reactivity

The concentrations and chromatographic profiles of gaseous pollutants emitted from a municipal solid waste (MSW) biological treatment plant were investigated to identify the major odor substances and atmospheric photochemical reactive species (PRS). Four methods were used to measure different gaseous pollutants in this study, including colorimetric tubes, gas chromatography with mass spectrometry/flame ionization detection/pulsed flame photometric detection (GC-MS/FID/PFPD) preceded by cold trap concentration, GC-FID preceded by solid-phase microextraction (SPME), and high-performance liquid chromatography (HPLC) after derivation by 2,4-dinitrophenylhydrazine (DNPH). Seventy-five gaseous compounds belonging to nine groups (nitrogen compounds, sulfur compounds, alkanes, alkenes, aromatics, terpenes, alcohols, carbonyls, and volatile fatty acids [VFAs]) were identified. In the pre-biotreatment facility, the total concentration of the gaseous pollutants reached the maximum value on day 7 (317 ppm). During the post-biotreatment process, the total concentration of gaseous pollutants decreased from 331 ppm at the beginning to 162 ppm in the end. The group with the greatest decrease was carbonyls, from 64 to 7.4 ppm, followed by alcohols, from 40 to 4.5 ppm, which were both oxygenated compounds. The proportion of aromatics was notably high in the pre-mechanical treatment facility, accounting for 50.6% of the total, revealing the xenobiotic compounds disseminated by stirring and agitating the waste in the initial stage. The proportions of nitrogen compounds were lower in the pre- and post-mechanical treatment facilities (1.5% and 6.9%) than in the pre- and post-biotreatment facilities (11.9% and 13.8%), suggesting that their generation was closely associated with waste degradation. The major odor compounds in the facilities were acetic acid, butyric acid, valeric acid, isovaleric acid, and dimethyl sulfide. The major PRS in the facilities were aromatics, acetaldehyde, butyraldehyde, hexanal, isopentyl aldehyde, alcohol, α-pinene, limonene, and terpinene. Outside the facilities, VFAs and aromatics were the most important compounds causing an environmental impact.

Implications: The aim of this work is to assess the gaseous environmental impacts of mechanical biological treatment technology. The emission of gaseous pollutants greatly affects the living quality of nearby residents and odor complaints are becoming a major problem now. In this study, the authors utilized various pretreatment and analytical methods to obtain integrated emission information of gaseous pollutants. The results showed the transformation and fate of the gas pollutants during the treatment processes, which would help to improve the processes and to mitigate gaseous pollution.

Supplemental Materials: Supplemental materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for information on the concentrations of the nine compound families at different sampling locations in the plant.