Real-time measurements of landfill atmospheric ammonia using mobile white cell differential optical absorption spectroscopy system and engineering applications

ABSTRACT

The real-time measurement of atmospheric ammonia at municipal solid waste (MSW) landfills and adjacent areas is necessary for landfill management and the health of nearby residence. Continuous, fast, and real-time monitoring of landfill odor gases is a challenge, especially for ammonia. To our knowledge, this was the first study for the characteristics and seasonal variabilities of atmospheric ammonia at a whole landfill using a Mobile White cell Differential Optical Absorption Spectroscopy (MW-DOAS) system, which also simultaneously offers high sensitivity and fast response. Results show that atmospheric ammonia levels at various landfill areas were significantly dependent on the characteristics of areas, such as municipal solid waste-related areas, leachate-related areas, sludge-related areas, and fly ash-related area, the atmospheric ammonia peak or average level at the active leachate pool of the active MSW site was the highest among all areas of the whole landfill, and the ammonia concentrations at the closed MSW landfill sites were low and dependent on the ages. Moreover, it was found that the seasonal variabilities of ammonia concentrations at most of those areas were significantly dependent on the ambient temperature, and ambient temperature variation caused the atmospheric ammonia level at the active leachate pool and active MSW landfill site in the summer survey to raise 3.5 times and 5.58 times than in the winter survey, respectively.

Implications: Continuous, fast, and real-time monitoring ambient ammonia at or nearby a landfill is critical for landfill operators and local EPAs. This study demonstrates that the mobile White cell Differential Optical Absorption Spectroscopy (MW-DOAS) system is an effective tool for real-time monitoring ambient ammonia of a whole landfill. The results in this article provided a guideline to the characteristics and seasonal changes of ambient ammonia at various types of areas of a whole landfill as well as the impact of age to ambient ammonia at the closed landfill areas.     

常熟垃圾焚烧飞灰安全填埋场工程设计

介绍了常熟垃圾焚烧飞灰安全填埋工程的设计，包括飞灰预处理系统、填埋库结构、防渗和封场设计以及渗沥液处理等。结合工程设计实践，探讨了飞灰安全填埋场的设计技术和设计原则。     

A survey of municipal solid waste landfills in Beijing during 2009–2011

The investigation of municipal solid waste (MSW) treatment in China is rare due to its sensitivity and difficulty in terms of access. We chose Beijing, the capital of China, as an example to identify the characteristics of MSW landfill treatments using a 2-month investigation with 20 participants. MSW landfill treatments account for nearly 70% of the annual MSW disposal in Beijing; the landfill processes are equipped with many kinds of technologies and consume a large amount of energy and produce a variety of contaminants. The cover method (the most obvious difference in landfill tamping) mainly includes high-density polyethylene (HDPE) geomembranes with loess and soil alone (i.e., loess or sandy soil). We investigated the actual conditions of landfills and collected data on leachate and landfill gas (LFG) emissions and energy consumption during 2009–2011. The results indicated that the cover method employed by landfills was related to treatment quantity, operation, and especially landfill location. Early large-scale landfills located in plains were covered with HDPE geomembranes, and newly built landfills covered with soil tended to be equipped with HDPE covers. Using HDPE cover also contributed greatly to LFG production due to its impermeability but had no remarkable effect on leachate yield reduction due to the dry climate in Beijing. The potential was reinforced by the potentials of decrement and reuse. The disposal method of LFG can be optimized, and the power generated by the LFG process can meet the landfill demand. The gray water recycled from the leachate could be used in the landfill process.

     

An economic evaluation and assessment of environmental impact of the municipal solid waste management system for Taichung City in Taiwan

Municipal solid waste management (MSWM) is an important environmental challenge and subject in urban planning. For sustainable MSWM strategies, the critical management factors to be considered include not only economic efficiency of MSW treatment but also life-cycle assessment of the environmental impact. This paper employed linear programming technique to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of a MSWM system, and investigated the correlations between the economical optimization and pollutant emissions. A case study based on real-world MSW operating parameters in Taichung City is also presented. The results showed that the costs, benefits, streams of MSW, and throughputs of incinerators and landfills will be affected if pollution emission reductions are implemented in the MSWM strategies. In addition, the quantity of particulate matter is the best pollutant indicator for the MSWM system performance of emission reduction. In particular, this model will assist the decision maker in drawing up a friendly MSWM strategy for Taichung City in Taiwan.

Implications: Recently, life-cycle assessments of municipal solid waste management (MSWM) strategies have been given more considerations. However, what seems to be lacking is the consideration of economic factors and environmental impacts simultaneously. This work analyzed real-world data to establish optimal MSWM strategies considering economic efficiency and the air pollutant emissions during the life cycle of the MSWM system. The results indicated that the consideration of environmental impacts will affect the costs, benefits, streams of MSW, and throughputs of incinerators and landfills. This work is relevant to public discussion and may establish useful guidelines for the MSWM policies.     

Emission,speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site

Surface emission from Dhapa, the only garbage disposal ground in Kolkata, is a matter of concern to the local environment and also fuels the issues of occupational and environmental health. Surface emission of the Dhapa landfill site was studied using a flux chamber measurement for nonmethane volatile organic compounds (NMVOCs). Eighteen noncarbonyl volatile organic compounds (VOCs) and 14 carbonyl VOCs, including suspected and known carcinogens, were found in appreciable concentrations. The concentrations of the target species in the flux chamber were found to be significantly higher for most of the species in summer than winter. Surface emission rate of landfill gas was estimated by using two different approaches to assess the applicability for an open landfill site. It was found that the emissions predicted using the model Land GEM version 3.02 is one to two orders less than the emission rate calculated from flux chamber measurement for the target species. Tropospheric ozone formation has a serious impact for NMVOC emission. The total ozone-forming potential (OFP) of the Dhapa dumping ground considering all target NMVOCs was estimated to be 4.9E+04 and 1.2E+05 g/day in winter and summer, respectively. Also, it was found that carbonyl VOCs play a more important role than noncarbonyl VOCs for tropospheric ozone formation. Cumulative cancer risk estimated for all the carcinogenic species was found to be 2792 for 1 million population, while the total noncancer hazard index (HI) was estimated to be 246 for the occupational exposure to different compounds from surface emission to the dump-site workers at Dhapa.

Implications:This paper describes the real-time surface emission of NMVOCs from an open municipal solid waste (MSW) dump site studied using a flux chamber. Our study findings indicate that while planning for new landfill site in tropical meteorology, real-time emission data must be considered, rather than relying on modeled data. The formation of tropospheric ozone from emitted NMVOC has also been studied. Our result shows how an open landfill site acts as a source and adds to the tropospheric ozone for the airshed of a metropolitan city.     

Effect of biogas generation on radon emissions from landfills receiving radium-bearing waste from shale gas development

Dramatic increases in the development of oil and natural gas from shale formations will result in large quantities of drill cuttings, flowback water, and produced water. These organic-rich shale gas formations often contain elevated concentrations of naturally occurring radioactive materials (NORM), such as uranium, thorium, and radium. Production of oil and gas from these formations will also lead to the development of technologically enhanced NORM (TENORM) in production equipment. Disposal of these potentially radium-bearing materials in municipal solid waste (MSW) landfills could release radon to the atmosphere. Risk analyses of disposal of radium-bearing TENORM in MSW landfills sponsored by the Department of Energy did not consider the effect of landfill gas (LFG) generation or LFG control systems on radon emissions. Simulation of radon emissions from landfills with LFG generation indicates that LFG generation can significantly increase radon emissions relative to emissions without LFG generation, where the radon emissions are largely controlled by vapor-phase diffusion. Although the operation of LFG control systems at landfills with radon source materials can result in point-source atmospheric radon plumes, the LFG control systems tend to reduce overall radon emissions by reducing advective gas flow through the landfill surface, and increasing the radon residence time in the subsurface, thus allowing more time for radon to decay. In some of the disposal scenarios considered, the radon flux from the landfill and off-site atmospheric activities exceed levels that would be allowed for radon emissions from uranium mill tailings.

Implications: Increased development of hydrocarbons from organic-rich shale formations has raised public concern that wastes from these activities containing naturally occurring radioactive materials, particularly radium, may be disposed in municipal solid waste landfills and endanger public health by releasing radon to the atmosphere. This paper analyses the processes by which radon may be emitted from a landfill to the atmosphere. The analyses indicate that landfill gas generation can significantly increase radon emissions, but that the actual level of radon emissions depend on the place of the waste, construction of the landfill cover, and nature of the landfill gas control system.     

西南地区某已封场非规范垃圾填埋场垃圾稳定化进程分析

以重庆某非规范填埋场为例,针对西南地区已封场非规范垃圾填埋场的稳定化进程进行了分析。按照场地布局选取4个采样点,在垃圾体上进行钻孔取样,分析不同深度的垃圾样pH值、有机质、含水率、生物可降解度以及垃圾样浸出液和填埋气组成以及各个指标随着填埋深度的变化规律,确定不同深度垃圾体的稳定化程度。结果表明,场内垃圾已呈现矿化垃圾特征;有机质、BDM、浸出液COD以及填埋气CH4含量等4个指标与填埋深度均较好地符合一级降解反应,可以预测垃圾体稳定化临界填埋深度。根据有机质、BDM、浸出液COD以及填埋气CH4含量等4个指标与填埋深度一级降解反应函数预测临界稳定化深度为15 m,与实测值判定的稳定化填埋深度相一致性。在对非规范垃圾填埋场场地利用过程中,需要先对未稳定的上层垃圾进行清理,并在已稳定的底层垃圾体上充填其他稳定介质后利用该地块。     

Optimization for municipal solid waste treatment based on energy consumption and contaminant emission

This paper analyzes the characterization of energy consumption and contaminant emissions from a municipal solid waste (MSW) treatment system that comprises transfer station, landfill site, combustion plant, composting plant, dejecta treatment station, and an integrated MSW treatment plant. The consumed energy and energy medium materials were integrated under comprehensive energy consumption (CEC) for comparison. Among typical MSW disposal methods such as combustion, composting, and landfilling, landfilling has the minimum CEC value. Installing an integrated treatment plant is the recommended MSW management method because of its lower CEC. Furthermore, this method is used to ensure process centralization. In landfill sites, a positive linear correlation was observed between the CEC and contaminant removal ratios when emitted pollutants have a certain weight coefficient. The process should utilize the minimum CEC value of 5.3702 kgce/t MSW and consider energy consumption, energy recovery, MSW components, and the equivalent of carbon dioxide emissions.     

Analysis of Long-Term Settlement of Municipal Solid Waste Landfills as Determined by Various Settlement Estimation Methods

Abstract

In this study, several existing municipal solid waste (MSW) settlement estimation methods are reviewed and applied to analyze the settlement data of nine MSW land-fills. Because a biodegradation-related settlement contributes differently to a long-term total settlement depending on the age of landfills, the actual MSW landfill sites are classified into three groups to specifically address the validity of each method in its prediction of a long-term settlement for each age category. Results demonstrate that there are considerable decreases in predicted settlement potentials as fill age increases. Comparisons indicate that the individual estimation methods display a considerable variation in predicting settlements in the fresh MSW landfills. On the other hand, for the old refuse landfills, all of the estimation methods, except the extended soil model, predict low settlement potentials.     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

Modeling methane oxidation in landfill cover soils as indicator of functional stability with respect to gas management

A performance-based method for evaluating methane (CH₄) oxidation as the best available control technology (BACT) for passive management of landfill gas (LFG) was applied at a municipal solid waste (MSW) landfill in central Washington, USA, to predict when conditions for functional stability with respect to LFG management would be expected. The permitted final cover design at the subject landfill is an all-soil evapotranspirative (ET) cover system. Using a model, a correlation between CH₄ loading flux and oxidation was developed for the specific ET cover design. Under Washington’s regulations, a MSW landfill is functionally stable when it does not present a threat to human health or the environment (HHE) at the relevant point of exposure (POE), which was conservatively established as the cover surface. Approaches for modeling LFG migration and CH₄ oxidation are discussed, along with comparisons between CH₄ oxidation and biodegradation of non-CH₄ organic compounds (NMOCs). The modeled oxidation capacity of the ET cover design is 15 g/m²/day under average climatic conditions at the site, with 100% oxidation expected on an annual average basis for fluxes up to 8 g/m²/day. This translates to a sitewide CH₄ generation rate of about 260 m³/hr, which represents the functional stability target for allowing transition to cover oxidation as the BACT (subject to completion of a confirmation monitoring program). It is recognized that less than 100% oxidation might occur periodically if climate and/or cover conditions do not precisely match the model, but that residual emissions during such events would be de minimis in comparison with published limit values. Accordingly, it is also noted that nonzero net emissions may not represent a threat to HHE at a POE (i.e., a target flux between 8 and 15 g/m²/day might be appropriate for functional stability) depending on the site reuse plan and distance to potential receptors.

Implications: This study provides a scientifically defensible method for estimating when methane oxidation in landfill cover soils may represent the best available control technology for residual landfill gas (LFG) emissions. This should help operators and regulators agree on the process of safely eliminating active LFG controls in favor of passive control measures once LFG generation exhibits asymptotic trend behavior below the oxidation capacity of the soil. It also helps illustrate the potential benefits of evolving landfill designs to include all-soil vegetated evapotranspirative (ET) covers that meet sustainability objectives as well as regulatory performance objectives for infiltration control.     

Remedial Strategies for Municipal Solid Waste Management in China

ABSTRACT

The purpose of this investigation is to evaluate the current status and to identify the problems of municipal solid waste (MSW) management in China to determine appropriate remedial strategies. This is the second of two papers proposed on this topic. Major problems or difficulties identified in MSW management in China include MSW land, air, and water pollution, commingled collection, poor administration, shortage of funds, lack of facilities, and problems of training and public awareness.

In order to solve these problems and to improve MSW management in China, remedial strategies in three areas are recommended: institutional reform, technology development, and legislation and administrative improvement. The primary principle involved in institutional reform is unifying legislative responsibilities into one body and developing a market mechanism for handling MSW. Composting, landfills, and incineration should be equally developed in accordance with China's needs. The feasibility of developing technology to handle MSW in China is discussed. Also recommended is the establishment of sound regulatory systems, including a service fee system, a source separation system, and a training program. China is presently undergoing economic and institutional reform at the national and local levels. Results of this study will provide useful information on MSW management in China.     

Appropriateness of selecting different averaging times for modelling chronic and acute exposure to environmental odours

Odour emissions are episodic, characterised by periods of high emission rates, interspersed with periods of low emissions. It is frequently the short term, high concentration peaks that result in annoyance in the surrounding population. Dispersion modelling is accepted as a useful tool for odour impact assessment, and two approaches can be adopted. The first approach of modelling the hourly average concentration can underestimate total odour concentration peaks, resulting in annoyance and complaints. The second modelling approach involves the use of short averaging times. This study assesses the appropriateness of using different averaging times to model the dispersion of odour from a landfill site. We also examine perception of odour in the community in conjunction with the modelled odour dispersal, by using community monitors to record incidents of odour. The results show that with the shorter averaging times, the modelled pattern of dispersal reflects the pattern of observed odour incidents recorded in the community monitoring database, with the modelled odour dispersing further in a north easterly direction. Therefore, the current regulatory method of dispersion modelling, using hourly averaging times, is less successful at capturing peak concentrations, and does not capture the pattern of odour emission as indicated by the community monitoring database. The use of short averaging times is therefore of greater value in predicting the likely nuisance impact of an odour source and in framing appropriate regulatory controls.     

Compromising economic cost and air pollutant emissions of municipal solid waste management strategies by fuzzy multiobjective optimization model

Municipal solid waste management (MSWM) is an important environmental challenge and subject in urban planning. A sustainable MSWM strategy should consider not only economic efficiency but also life-cycle assessment of environmental impact. This study employs the fuzzy multiobjective linear programming (FMOLP) technique to find the optimal compromise between economic optimization and pollutant emission reduction for the MSWM strategy. Taichung City in Taiwan is evaluated as a case study. The results indicate that the optimal compromise MSWM strategy can reduce significant amounts of pollutant emissions and still achieve positive net profits. Minimization of the sulfur oxide (SO_x) and nitrogen oxide (NO_x) emissions are the two major priorities in achieving this optimal compromise strategy when recyclables recovery rate is lower; however, minimization of the carbon monoxide (CO) and particulate matter (PM) emissions become priority factors when recovery rate is higher.

Implications: This paper applied the multiobjective optimization model to find the optimal compromise municipal solid waste management (MSWM) strategy, which minimizes both life-cycle operating cost and air pollutant emissions, and also to analyze the correlation between recyclables recovery rates and optimal compromise strategies. It is different from past studies, which only consider economic optimization or environmental impacts of the MSWM system. The result shows that optimal compromise MSWM strategy can achieve a net profit and reduce air pollution emission. In addition, scenario investigation of recyclables recovery rates indicates that resource recycling is beneficial for both economic optimization and air pollutant emission minimization.     

垃圾填埋场加速稳定化表征指标的相关性分析

加速稳定化表征指标是生物反应器填埋技术评价的重要内容。通过垃圾填埋室内模拟实验,研究不同运行工况下垃圾挥发性固体(VS)、生物可降解物(BDM)、纤维素(C)和纤维素/木质素(C/L)等组分指标的动态变化规律及其对加速稳定化进程的指示作用,进而探寻各指标之间的相关性,进一步筛选确定垃圾填埋场加速稳定化进程的核心表征指标。结果表明,垃圾组分VS、BDM、C和C/L的衰减符合一级反应动力学,其动态变化能够较为灵敏地指示渗滤液回灌和通风供氧对垃圾稳定化的显著加速作用,可作为垃圾填埋场加速稳定化进程的表征指标。VS、BDM、C和C/L相互之间具有良好的正线性相关性。BDM和C/L适宜作为垃圾填埋场加速稳定化进程的核心表征指标。     

Compressibility of municipal solid waste codisposed with fly ash

If a municipal solid waste (MSW) landfill is used as the foundation for a construction site, the change in the loading conditions may cause considerable compression of the landfill. Therefore, reinforcement to compensate for the loose compression nature of a MSW landfill is a very important design factor for geotechnical engineers when considering the end-use of the landfill. In this study, we discuss a possible technique for stabilizing MSW landfills through the codisposal of municipal solid waste and fly ash. To estimate the stabilization based on the compression characteristics of the codisposed landfill, we performed tests using a large compression set and experimental cells. According to the test results, if the proportion of fly ash is increased, initial and long-term compression could be reduced.     

城市生活垃圾半好氧生物反应器填埋技术试验研究

对城市生活垃圾半好氧生物反应器填埋技术与传统垃圾填埋技术进行了对比试验,由试验结果可知,半好氧生物反应器填埋技术可缩短填埋垃圾产酸时间,净化渗滤液,加速填埋垃圾稳定化进程.城市生活垃圾半好氧生物反应器填埋技术是中国中小城市垃圾填埋处理的发展方向.     

Household hazardous waste disposal to landfill: using LandSim to model leachate migration

Municipal solid waste (MSW) landfill leachate contains a number of aquatic pollutants. A specific MSW stream often referred to as household hazardous waste (HHW) can be considered to contribute a large proportion of these pollutants. This paper describes the use of the LandSim (Landfill Performance Simulation) modelling program to assess the environmental consequences of leachate release from a generic MSW landfill in receipt of co-disposed HHW. Heavy metals and organic pollutants were found to migrate into the zones beneath a model landfill site over a 20,000-year period. Arsenic and chromium were found to exceed European Union and US-EPA drinking water standards at the unsaturated zone/aquifer interface, with levels of mercury and cadmium exceeding minimum reporting values (MRVs). The findings demonstrate the pollution potential arising from HHW disposal with MSW.     

城市生活垃圾填埋初期有机质演化规律研究

为阐明生活垃圾填埋初期有机质演化规律,于填埋场打井采集填埋1～3年3个不同时期垃圾样品,用水浸提制备水溶性有机物(DOM)。采用红外光谱、同步荧光光谱及紫外光谱,对浸提液中DOM的结构和演化特征进行了研究。结果显示,生活垃圾中含有脂肪类、蛋白类、糖类及木质素类物质,在填埋初期,有机质中的脂肪类、蛋白质类、糖类及木质素类物质均发生了降解,羧基、氨类及水溶性芳香结构物质减少,DOM分子量降低。研究结果表明,垃圾填埋初期有机质以降解为主。     

Numerical model for static chamber measurement of multi-component landfill gas emissions and its application

The quantitative assessment of landfill gas emissions is essential to assess the performance of the landfill cover and gas collection system. The relative error of the measured surface emission of landfill gas may be induced by the static flux chamber technique. This study aims to quantify effects of the size of the chamber, the insertion depth, pressure differential on the relative errors by using an integrated approach of in situ tests, and numerical modeling. A field experiment study of landfill gas emission is conducted by using a static chamber at one landfill site in Xi’an, Northwest China. Additionally, a two-dimensional axisymmetric numerical model for multi-component gas transport in the soil and the static chamber is developed based on the dusty-gas model (DGM). The proposed model is validated by the field data obtained in this study and a set of experimental data in the literature. The results show that DGM model has a better capacity to predict gas transport under a wider range of permeability compared to Blanc’s method. This is due to the fact that DGM model can explain the interaction among gases (e.g., CH₄, CO₂, O₂, and N₂) and the Knudsen diffusion process while these mechanisms are not included in Blanc’s model. Increasing the size and the insertion depth of static chambers can reduce the relative error for the flux of CH₄ and CO₂. For example, increasing the height of chambers from 0.55 to 1.1 m can decrease relative errors of CH₄ and CO₂ flux by 17% and 18%, respectively. Moreover, we find that gas emission fluxes for the case with positive pressure differential (?P_in-out) are greater than that of the case without considering pressure fluctuations. The Monte Carlo method was adopted to carry out the statistical analysis for quantifying the range of relative errors. The agreement of the measured field data and predicted results demonstrated that the proposed model has the capacity to quantify the emission of landfill gas from the landfill cover systems.