Woodstove Smoke and CO Emissions: Comparison of Reference Methods with the VPI Sampler

A new field sampler has been developed for measuring the particulate matter (PM) and carbon monoxide emissions of woodburning stoves. Particulate matter is determined by carbon balance and the workup of a sample train which is similar to a room-temperature EPA Method 5G train. A steel tank, initially evacuated, serves as the motive force for sampling and also accumulates a gas sample for post-test analysis of time-averaged stack CO and CO₂ concentrations. Workup procedures can be completed, within 72 hours of sampler retrieval. The system has been compared to reference methods in two laboratory test series involving six different woodburning appliances and two independent laboratories. The correlation of field sampler emission rates and reference method rates is strong.     

Dilution-based emissions sampling from stationary sources: Part 1--Compact sampler methodology and performance

This paper presents the design and performance of a compact dilution sampler (CDS) for characterizing fine particle emissions from stationary sources. The sampler is described, along with the methodology adopted for its use. Dilution sampling has a number of advantages, including source emissions that are measured under conditions simulating stack gas entry and mixing in the ambient atmosphere. This is particularly important for characterizing the semivolatile species in effluents as a part of particulate emissions. The CDS characteristics and performance are given, along with sampling methodology. The CDS was compared with a reference dilution sampler. The results indicate that the two designs are comparable for tests on gas-fired units and a diesel electrical generator. The performance data indicate that lower detection limits can be achieved relative to current regulatory methods for particulate emissions. Test data for the fine particulate matter (PM2.5) emissions are provided for comparison with U.S. Environment Protection Agency (EPA) Conditional Test Method 040 for filterable particulate matter (FPM) and the EPA Method 202 for condensable particulate matter. This comparison showed important differences between methods, depending on whether a comparison is done between in situ FPM determinations or the sum of such values with condensable PM from liquid filled impingers chilled in an ice bath. These differences are interpretable in the light of semivolatile material present in the stack effluent and, in some cases, differences in detection and quantification limits. Determination of emissions from combustors using liquid fuels can be readily achieved using 1-hr sampling with the CDS. Emissions from gasfired combustors are very low, requiring careful attention to sample volumes. Sampling volumes corresponding with 6-hr operation were used for the combined mass and broad chemical speciation. Particular attention to dilution sampler operation with clean dilution air also is essential for gas-fired sources.     

A field intercomparison and fundamental characterization of various dust samplers with a reference sampler

The European Economic Community Council Directive 80/779/EEC describes air quality limit values and guide values for sulfur dioxide and suspended particulates. However, article 10, paragraph 1 does not define well enough the reference method required, amongst others, for the gravimetric measurement of suspended particulates. It is explicity stated in article 10, paragraph 5 of the directive, that "the commission shall, in selected locations in the member states and in cooperation with the latter, carry out studies on the sampling...of suspended particulates. These studies shall be designed in particular to promote the harmonization of methods of sampling and analysis of these pollutants." Therefore, in a joint research program the Umweltbundesamt (grant #104 02263), the commission of European Communities (grant #84-B-6642-11-017-11-N) and the U.S. EPA (grant #2-432U-3580) funded the development of a reference dust sampler by the Fraunhofer-Institute of Toxicology and Aerosol Research (FhlTA, in Hannover, Federal Republic of Germany) in order: to study the particle size distribution of ambient air aerosol at a number of selected sites; to compare the results obtained with the reference dust sampler with those of particle samplers operated in Europe and the United States; to verify the applicability of wind tunnel results to sampling behaviour in the free atmosphere.     

Compositional data analysis of smoke emissions from debris piles with low-density polyethylene

ABSTRACT

Data describing the composition of smoke are inherently multivariate and always non-negative parts of a whole. The data are relative and the information is contained in the ratios between parts of the composition. A prior analysis of smoke emissions produced from the burning of manzanita wood mixed with low-density polyethylene plastic applied traditional statistical methods to the compositional data and found no effect. The current paper applies compositional data techniques to these smoke emissions to determine if the prior analysis was accurate. Analysis of variance of the isometric log-ratios showed that LDPE significantly affected the CO₂ emission ratio for 8 of the 191 trace gases; this analysis showed none of the gases identified in the previous analysis were affected by LDPE. LDPE did not affect the CO₂ emission ratios for the alkanes, alkenes, alkynes, aldehydes, cycloalkanes, cycloalkenes, diolefins, ketones, MAHs, and PAHs. Compositional data analysis should be used to analyze smoke emissions data. Burning contaminant-free LDPE should produce emissions like wood.     

Cost of lower NOx emissions: Increased CO2 emissions from heavy-duty diesel engines

This paper highlights the effect of emissions regulations on in-use emissions from heavy-duty vehicles powered by different model year engines. More importantly, fuel economy data for pre- and post-consent decree engines are compared.The objective of this study was to determine the changes in brake-specific emissions of NO_x as a result of emission regulations, and to highlight the effect these have had on brake-specific CO₂ emission; hence, fuel consumption. For this study, in-use, on-road emission measurements were collected. Test vehicles were instrumented with a portable on-board tailpipe emissions measurement system, WVU's Mobile Emissions Measurement System, and were tested on specific routes, which included a mix of highway and city driving patterns, in order to collect engine operating conditions, vehicle speed, and in-use emission rates of CO₂ and NO_x. Comparison of on-road in-use emissions data suggests NO_x reductions as high as 80% and 45% compared to the US Federal Test Procedure and Not-to-Exceed standards for model year 1995–2002. However, the results indicate that the fuel consumption; hence, CO₂ emissions increased by approximately 10% over the same period, when the engines were operating in the Not-to-Exceed region.     

enforcement of diesel smoke emissions for the state of new jersey

This paper reports on the research program undertaken by the State of New Jersey to determine those tests and instruments which can be used by authorized state agencies for the enforcement of diesel smoke emissions. The state agencies under consideration for the enforcement of diesel smoke emissions are the following: (1) The Division of Motor Vehicles, in its system of state owned inspection stations, will be able to inspect all diesel-powered trucks, and tractors which are registered in New Jersey. (2) The Public Utilities Commission will be able to inspect at their home garages all buses registered in the State. (3) The New Jersey State Police will be able to inspect diesel-powered vehicles on the road. It was decided that the maximum inspection time for each vehicle was not to exceed one minute. On the basis of the one minute per vehicle requirement, eight different tests were evaluated to determine which ones correlated well with normal vehicle operation. These tests included acceleration of a fixed external inertia, free acceleration of only the moving parts of the engine, three ramp tests, a test in which a heavy vehicle was towed, and a driving test in which the vehicle being tested was actually accelerated. The results of tests demonstrated that the modified free acceleration method correlates reasonably well with a loaded steady state cycle, distinguishes the high emitters and is simple to perform. Consequently, the free acceleration test method is recommended for use in inspection stations and on the road. Finally, nearly two hundred vehicles have been tested by this procedure to determine present and potential levels of diesel smoke emissions. Another phase of the program consisted of the determination of smoke measuring techniques and instrumentation. The use and design of smokemeters were extensively investigated, as well as the use of the visual and photographic techniques. Of the various smokemeters tested for this application, several measured smoke satisfactorily in the laboratory, but none were found adequate for field use; they either lacked portability or were unstable due to the deposition of soot on the optics. At the time of writing, specifications for the necessary smokemeter have been drafted and published for bid to interested manufacturers.     

Determinants of CO2 emissions: exploring the unexplored in low-income countries

Environmental Science and Pollution Research - In thirst for economic growth, economies are engaged in anti-environmental activities that drive them towards climate change and CO2 emissions....     

Measuring environmental emissions from tobacco combustion: Sidestream cigarette smoke literature review

The tobacco-derived environmental emission of most common concern is the smoke issuing from cigarettes between puffs. A literature review of smoke formation mechanisms, sampling methods and selected emission factors suggests that sidestream deliveries are actually much less variable than is commonly thought. Examples of devices used to generate and collect sidestream smoke for analysis are described and their advantages and disadvantages discussed. Emissions computed as is common practice from sidestream/mainstream ratios are compared to those determined directly. The ratio method can yield misleading results because of the sensitivity of mainstream deliveries to cigarette and burn characteristics.     

Composition and emissions of VOCs in main- and side-stream smoke of research cigarettes

It is well known that mainstream (MS) and sidestream (SS) cigarette smoke contains a vast number of chemical substances. Previous studies have emphasized SS smoke rather than MS smoke to which smokers are exposed, and most have used chamber tests that have several disadvantages such as wall losses. Emissions from standard research cigarettes have been measured, but relatively few constituents have been reported, and only the 1R4F (low nicotine) cigarette type has been tested. This study provides a comprehensive characterization of total, MS and SS smoke emissions for the 1R5F (ultra low nicotine), 2R4F (low nicotine), and 1R3F (standard nicotine) research cigarettes research cigarettes, including emission factors for a number of toxic compounds (e.g., benzene) and tobacco smoke tracers (e.g., 2,5-dimethyl furan). Emissions of volatile organic compounds (VOCs) and particulate matter (PM) are quantified using a dynamic dilution emission measurement system that is shown to produce accurate, rapid and reproducible results for over 30 VOCs and PM. SS and MS emissions were accurately apportioned based on a mass balance of total emissions. As expected, SS emissions greatly exceeded MS emissions. The ultra low nicotine cigarette had lower emissions of most VOCs compared to low and standard nicotine cigarettes, which had similar emissions. Across the three types of cigarettes, emissions of benzene (296–535 μg cig⁻¹), toluene (541–1003 μg cig⁻¹), styrene (90–162 μg cig⁻¹), 2-dimethyl furan (71–244 μg cig⁻¹), naphthalene (15–18 μg cig⁻¹) and other VOCs were generally comparable to or somewhat higher than literature estimates using chamber tests.     

Evaporative traffic hydrocarbon emissions,traffic CO and speciated HC traffic emissions from the city of Athens

Quasi-continuous measurements of NO_x, CO and C₅–C₁₂ hydrocarbons made during the MEDCAPHOT-TRACE experiment in a street canyon with heavy traffic load were used to estimate the CO/NO_x and 36 individual NMHC/NO_x traffic emission ratios in the Athens basin. A traffic emission inventory has been compiled for Athens and aspects of this inventory were tested against measurements. The results indicate that although the main features of the 9:00 to 15:00 variations of the NMHC/NO_x and CO/NO_x inventory emission ratios are in agreement with observations, during the rest of the day the fine structure of the variations of these ratios cannot be accurately predicted by the inventory. Comparison of pollutant emission ratios derived from ambient measurements with emission ratios predicted by existing inventories for Athens reveals serious discrepancies. Further, the experimental results and theoretical considerations indicate that the speciation of evaporative emissions changes with increasing ambient temperature in favour of the most volatile HC species, thus changing the speciation of traffic emissions during the course of the day. This is an aspect that is not taken into account in present urban photochemical modelling inventories.     

The environmental Kuznets curve and CO2 emissions in the USA

Environmental Science and Pollution Research - In this paper, we analyze the existence of the environmental Kuznets curve as reported by Kuznets (Am Econ Rev 5:1–28, 1955) by using the...     

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation,model description and initial simulation

Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO₂ spatiotemporal variability and verify CO₂ fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO₂. This paper presents methods, input data, and initial results for CO₂ simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere–atmosphere exchange, and meteorology in regulating the spatial distribution of CO₂ near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO₂ concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO₂ fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO₂ reasonably well but with a low bias in the early morning. The spatial distribution of CO₂ was found to correlate with NOx, SO₂, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO₂ observations and understand CO₂ variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO₂ source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO₂ spatiotemporal variability and various uncertainties in the future.

Implications: Atmospheric CO₂ has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO₂ variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO₂ emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO₂ as an air pollutant.     

A new perspective to environmental degradation: the linkages between higher education and CO2 emissions

Although there have been many studies, focusing on basic determinants of carbon dioxide emissions (CO₂), the effect of higher education, which has the potential to be an important determinant of CO₂, has been neglected. The paper aims to display the potential mechanisms between higher education and CO₂ and expand the environmental economics literature. In the paper, the trade-off between higher education and CO₂ is tested by autoregressive distributed lag (ARDL) during the period 1983–2017 in Turkey. Results denote that cointegration exists and an increase in higher education negatively affects CO₂. We also find that economic growth and energy consumption positively affect CO₂ both in the long run and short run. Vector error correction model (VECM) reveals that higher education, economic growth, energy consumption, trade openness, and exchange rates are the causes of CO₂ in the long run. Also, energy consumption and economic growth are the causes of CO₂ in the short run. Therefore, higher education can be used to overcome environmental problems.

     

Economic performance of Indonesia amidst CO2 emissions and agriculture: a time series analysis

Environmental Science and Pollution Research - To minimize the awful situation confronting the entire globe, the global warming danger has raised the intensity of consciousness from all areas of...     

Effect of low-density polyethylene on smoke emissions from burning of simulated debris piles

Low-density polyethylene (LDPE) plastic is used to keep piled debris from silvicultural activities—activities associated with development and care of forests—dry to enable efficient disposal by burning. The effects of inclusion of LDPE in this manner on smoke emissions are not well known. In a combustion laboratory experiment, 2-kg mixtures of LDPE and manzanita (Arctostaphylos sp.) wood containing 0, 0.25, and 2.5% LDPE by mass were burned. Gaseous and particulate emissions were sampled in real time during the entire flaming, mixed combustion phase—when the flaming and smoldering phases are present at the same time—and during a portion of the smoldering phase. Analysis of variance was used to test significance of modified combustion efficiency (MCE)—the ratio of concentrations of fire-integrated excess CO₂ to CO₂ plus CO—and LDPE content on measured individual compounds. MCE ranged between 0.983 and 0.993, indicating that combustion was primarily flaming; MCE was seldom significant as a covariate. Of the 195 compounds identified in the smoke emissions, only the emission factor (EF) of 3M-octane showed an increase with increasing LDPE content. Inclusion of LDPE had an effect on EFs of pyrene and fluoranthene, but no statistical evidence of a linear trend was found. Particulate emission factors showed a marginally significant linear relationship with MCE (0.05 < P-value < 0.10). Based on the results of the current and previous studies and literature reviews, the inclusion of small mass proportions of LDPE in piled silvicultural debris does not appear to change the emissions produced when low-moisture-content wood is burned. In general, combustion of wet piles results in lower MCEs and consequently higher levels of emissions.

Implications:Current air quality regulations permit the use of burning to dispose of silvicultural piles; however, inclusion of low-density polyethyelene (LDPE) plastic in silvicultural piles can result in a designation of the pile as waste. Waste burning is not permitted in many areas, and there is also concern that inclusion of LDPE leads to toxic air emissions.     

餐厨垃圾处置方式及其碳排放分析

在综述填埋、好氧堆肥、粉碎直排、厌氧消化产沼气及综合处置等5种餐厨垃圾处置方式原理与特点的基础上,分别罗列出各种处置方式的优缺点、应用场合以及今后仍然需要研究的方向。着眼于餐厨垃圾资源化与碳减排,厌氧消化产沼气被定位为今后餐厨垃圾处置的主要应用方向,特别是与市政污水处理剩余污泥共消化更是今后研究与应用的主流。餐厨垃圾处置全生命周期碳排放分析亦表明,厌氧消化产沼气与其他4种处置方式相比,在资源回收与碳减排方面优势明显,这就决定了厌氧消化今后在餐厨垃圾处置技术中将处于首选位置。餐厨垃圾与剩余污泥厌氧共消化产生的沼气量具有“1+1>2”的能量转化效果,这种方式可以使污水处理厂演变为“能源工厂”的角色,而且还能省去餐厨垃圾单独处置所需的各种设施。     

Black carbon emissions in gasoline vehicle exhaust: A measurement and instrument comparison

A pilot study was conducted to evaluate the performance and agreement of several commercially available black carbon (BC) measurement instruments, when applied to the quantification of BC in light-duty vehicle (LDV) exhaust. Samples from six vehicles, three fuels, and three driving cycles were used. The pilot study included determinations of the method detection limit (MDL) and repeatability. With respect to the MDL, the real-time instruments outperformed the time-integrated instruments, with MDL = 0.12 mg/mi for the AE51 Aethalometer, and 0.15 mg/mi for the Micro Soot Sensor (MSS), versus 0.38 mg/mi for the IMPROVE_A thermal/optical method, and 0.35 mg/mi for the OT21_T Optical Transmissometer. The real-time instruments had repeatability values ranging from 30% to 35%, which are somewhat better than those of the time-integrated instruments (40–41%). These results suggest that, despite being less resource intensive, real-time methods can be equivalent or superior to time-integrated methods in terms of sensitivity and repeatability. BC mass data, from the photoacoustic and light attenuation instruments, were compared against same-test EC data, determined using the IMPROVE_A method. The MSS BC data was well correlated with EC, with R ² = 0.85 for the composite results and R² = 0.86 for the phase-by-phase (PBP) results. The correlation of BC, by the AE51, AE22, and OT21_T, with EC was moderate to weak. The weaker correlation was driven by the inclusion of US06 test data in the linear regression analysis. We hypothesize that test-cycle-dependent BC:EC ratios are due to the different physicochemical properties of particulate matter (PM) in US06 and Federal Test Procedure (FTP) tests. Correlation amongst the real-time MSS, PASS-1, AE51, and AE22 instruments was excellent (R² = 0.83–0.95), below 1 mg/mi levels. In the process of investigating these BC instruments, we learned that BC emissions at sub-1 mg/mi levels can be measured and are achievable by current-generation gasoline engines.

Implications: Most comparison studies of black carbon (BC) measurement methods were carried out in the ambient air. This study assesses the agreement among various BC measurement instrument in emissions from light-duty gasoline vehicles (LDGVs) on standard test cycles, and evaluates applicability of these methods under various fuel types, driving cycles, and engine combustion technologies. This research helps to fill in the knowledge gap of BC method standardization as stated in the U.S. Environmental Protection Agency (EPA) 2011 Report to Congress on Black Carbon, and these results demonstrate the feasibility of quantification of BC at the 1 mg/mi PM standard in California Low Emission Vehicle III regulations.     

Consumption-based CO2 emissions accounting and scenario simulation in Asia and the Pacific region

Environmental Science and Pollution Research - This study uses a consumer-based accounting approach to evaluate the CO2 emission factors of 17 countries in Asia and the Pacific region by including...     

Determinants of CO2 emissions in upper middle-income group countries: an empirical investigation

Environmental Science and Pollution Research - This study investigates the kinked exponential growth, degree of association, and causation between economic growth, energy consumption, population,...     

Linear trend analysis: a comparison of methods

In this paper, we present an overview of statistical approaches available for detecting and estimating linear trends in environmental data. We evaluate seven methods of trend detection and make recommendations based on a simulation study. We also illustrate the methods using real data.