Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements

This article analyses the current and future end-of-life management of electronic displays (flat screen televisions and monitors), and identifies and discusses possible ecodesign recommendations to improve it. Based on an investigation of the treatment of displays in two typical European recycling plants, key aspects and criticalities of the recycling methods (sorting, dismantling and pre-processing) are identified. Disaggregated data concerning on-site measurements of the time needed to manually dismantle different displays are presented. The article also discusses the potential evolution of end-of-life scenarios for electronic displays and suggests possible recommendations for recyclers, producers and policy-makers to promote resource efficiency in the recycling of such waste products. Data on time for dismantling the displays can be used to build measurers for voluntary and mandatory policies, to stimulate design innovations for products improvement, and to assess possible alternative treatments of the waste during the pre-processing at the recycling plants. Some quantitative product measures (based on the time thresholds for dismantling some key components) are also discussed, including an assessment of their economic viability. These measures can potentially be enforced through mandatory and voluntary European product policies, and could also be extended to other product groups.     

Case study: P2 in a manufacturing plant

Pollution prevention is among the most cost‐effective environmental quality management tools —and P2 projects can yield ongoing savings. © 2000 John Wiley & Sons, Inc.     

Exploring the perceived impacts of a public high school closure for urban liveability in a Canadian midsized city

ABSTRACT

Public schools are more than educational institutions; they are essential to creating liveable neighbourhoods. Despite their importance, public schools are being permanently closed across North America, and particularly in the Canadian province of Ontario. In 2015, one of Ontario's public school boards made the decision to permanently close the province's oldest public high school, located in the urban core of the historic midsized city of Kingston. While the school is not scheduled to close until late 2019, the established fate of this prominent public asset has important consequences for the liveability of Kingston's urban core. Accordingly, the objective of this study was to document residents’ perceived impacts of the decision to close to Kingston Collegiate Vocational Institute (KCVI) on liveability in the school's catchment area. We observed widespread dissatisfaction with the decision to close KCVI (85%), with large proportions of respondents (above 40%) anticipating KCVI's closure to negatively impact neighbourhood liveability in various ways in the future. Approximately one-quarter of respondents indicated that they have considered moving as a result of the decision, and among these, concerns about negative impacts to household-level well-being were particularly acute. Given the socio-demographic profile of respondents who have considered moving, these findings suggest that the closure of KCVI could have a destabilising effect on the neighbourhoods within the KCVI catchment area by driving families out of the city's urban core. Our findings suggest that policies to address concerns of under-enrolment are short-sighted and undermine efforts of other sectors to promote liveable communities.     

Sustainability of farmers' soil fertility management practices: a case study in the North China Plain

To ensure regional self-sufficiency and adequate rural livelihoods in the North China Plain (NCP), tremendous efforts were made over the last two decades by the Chinese government to raise the productivity of crops, despite increasing pressure on the land caused by a growing population. Emphasis was placed on high external input use, especially for wheat, maize and cotton, ignoring the particularities and limitations of the natural resource base. This study assesses the sustainability of current soil fertility management practices on the basis of selected location-specific indicators, such as fertilizer use, soil pH, soil organic matter content, levels of nitrogen (N), phosphorus (P) and potassium (K) in the soil, and identifies determining factors of the yield and environmental impacts of inputs use. Data used for the analysis were gathered from soil tests, groundwater and chive plant tests, household surveys, and statistical yearbooks. Stepwise multiple regression analysis is applied to determine factors affecting the yields. The study revealed unbalanced use of nutrients. Organic fertilizers (manure, crop residues) and K are insufficiently applied, whereas N and P are considerably overused in comparison with recommended doses. The intensive cropping in the area using high-input technologies -particularly fertilizer- has resulted in a remarkable general enhancement of crop productivity and improvement of soil fertility over the years. The yield of wheat and maize has increased 173 and 180 kg ha(-1) annually from 1982 to 2000, respectively and soil fertility status also improved over the years and the values of the selected indicators are within the borderline for sustainability. Irrigation water, FYM application, and total labor used during the cultivation season (with the exception of cotton and chive) for production are the main factors determining the yields of four major crops under study, while popularly and overly used N did not appear to be a significant factor affecting the yield. Its overuse, however, leads to leaching of nitrate into groundwater and nitrate enrichment of vegetables. Of 20 groundwater samples, 16 showed nitrate levels between 55 and 180 mg l(-1), which exceeds recommendations for drinking water (相似文献   

Complex dynamics in the uptake of new farming practices: a case study for organic waste application

Adverse environmental effects of intensive agriculture, together with scarcity in phosphates and water, urge farmers to find more sustainable practices. An example of such a sustainable practice is on-farm processing of organic waste. This paper explores three mechanisms that can lead to a widespread uptake of this technique: (1) economies of scale, (2) information sharing, and (3) adjustment of social norms. Although each of these mechanisms has been studied before, this paper provides new insights by considering the interactions that might exist between the different mechanisms when they are applied to real-life situations. Based on a pilot study, we developed a multi-criteria mathematical programming model at individual farm level. We used this model to simulate the uptake of on-farm processing of organic waste, as a result of the three mechanisms and their interactions. Our results show that each mechanism results in an increased uptake, but is not likely to cause a widespread uptake. Interaction between the mechanisms, will lead to a much higher uptake. This result suggests that simultaneous consideration of multiple mechanisms is essential to understand the behaviour of social–ecological systems.     

Controlling industrial pollution using EIA: Case study of a Kenyan tannery project

Summary Since the late 1970s, the National Environment Secretariat (NES) in Kenya has viewed environmental impact assessment (EIA) as a principal tool for meeting its environmental protection objectives. Prior to the formation of the Inter-Ministerial Committee on the Environment (IMCE), NES was ineffective in forcing any project proponents to take the EIA requirements seriously. The IMCE has provided NES with the ability to co-opt Committee members and to use the legislatively based mandates of those members to enforce its EIA requirements for industrial projects. A successful example of this co-optation is the case of the Leather Industries of Kenya (LIK), involving a new tannery whose final siting and wastewater treatment control facilities were substantially influenced by the EIA process. Although the LIK case does not offer a basis for generalisation, it provides insights into: (a) how EIA is implemented for new industrial facilities in Kenya, (b) the advantages and disadvantages of the EIA system, and (c) the constructive roles donor agencies can play in promoting institutional reforms for EIA.Dr Rafik Hirji is a Senior Engineer at James M. Montgomery Consulting Engineers, Inc., Suite 160, Sacramento, CA 95825. He was formerly a graduate research assistant in the Department of Civil Engineering at Stanford University. Dr Leonard Ortolano is the UPS Foundation Professor of Civil Engineering at Stanford University, Stanford, CA 94305-4020, USA.     

Case study: Chemical approval at HADCO Corporation

This case study is the second in a four‐part series profiling environmental decision making at leading companies. © 2000 John Wiley & Sons, Inc.     

Development planning in Mexico: Case study of an oil-rich economy

The authors identify problems of political, economic and social development in Mexico, which has now become a net oil exporter. Aspects of Mexican society are analysed - possession of resources, population growth, agricultural and industrial sectors of the economy and development policy. The political and economic components of social change and policy limitations are considered. It is clear that the severity of Mexico's development problems present serious issues for the current administration.     

CFD analysis on the performance of a solar chimney power plant system: Case study in Algeria

The solar chimney power plant (SCPP) is a power generator which uses solar radiation to increase the internal energy of the air circulating in the system, thereby transforming the useful gain of the solar collector into kinetic energy. The produced kinetic energy then can be converted into electrical energy by means of an appropriate turbine. In this paper, four locations in Algeria

(Constantine, Ouargla, Adrar, and Tamanrasset) were considered as case studies to describe the SCPP mechanism in detail. Numerical simulation of an SCPP which has the same geometrical dimensions was performed to estimate the power output of SCPP in these regions. Using the CFD software FLUENT we simulated a two-dimensional axisymmetric model of a SCPP with the standard k-ε turbulence model. The simulation results show that the highest power output produced monthly average value 68–73 KW over the year and the highest hourly power produced in June is around 109–113 KW.     

Adoption of sustainable agriculture practices: Evidence from a semi-arid region of Ethiopia

In the wake of the resource constraints for external farm inputs faced by farmers in developing countries, sustainable agriculture practices that rely on renewable local or farm resources present desirable options for enhancing agriculture productivity. In this study, plot-level data from the semi-arid region of Ethiopia, Tigray are used to investigate the factors influencing farmers' decisions to adopt agriculture practices, with a particular focus on conservation tillage, compost and chemical fertilizer. A trivariate probit model is used to analyze the determinants of adoption of these practices. In addition, stochastic dominance analysis is used to compare the productivity impacts of compost with that of chemical fertilizer based on a six-year cross-sectional farm-level dataset. Our results indicate heterogeneity with regard to the factors that influence adoption decisions of the three practices and the importance of both plot and household characteristics on influencing adoption decisions. In particular, we found that household endowments and access to information, among other factors, impact the choice of sustainable farming practices significantly. Furthermore, the use of stochastic dominance analysis supported the contention that sustainable farming practices enhance productivity. They even proved to be superior to the use of chemical fertilizers — justifying the need to investigate factors that influence adoption of these practices and to use this knowledge to formulate policies that encourage adoption.     

Case study: Voluntary agreements in environmental management at formosa plastics

Three agreements addressing environmental and safety performance, zero discharge of wastewater and sustainable development have been signed between Formosa Plastics Corporation, Texas (Formosa Plastics), and its former adversaries. The key element of the agreements is the improvement of the affected community. These agreements go beyond public information and beyond procedures for public participation. They have led to meaningful public participation and partnership and are unique in this respect. The following article explores the setup and results of each agreement. The initial agreement, the Blackburn-Formosa Agreement, signed in 1992, set the stage for subsequent partnerships. The Wilson-Formosa Zero Discharge Agreement followed in 1994. Finally, the Sustainable Development Agreement was signed by Jim Blackburn, Diane Wilson, and Formosa Plastics in late 1997. These agreements have proven very successful in avoiding disputes and helping improve company performance in environmental and safety issues. In many respects, these agreements offer a model for others in working with an affected community.     

The return of returnable bottles: A study of consumers' and retailers' attitudes and practices concerning returnable bottles

The authors highlight the importance of the trippage of a returnable bottle to the current beverage container debate. Results of recent surveys of consumers and retailers are presented, which show that the reasons for low trippages in the UK are more complex than the conventional diagnosis that ‘consumers cannot be bothered to return bottles’. In many instances consumers thought that the ‘returnable bottle was ‘non- returnable’ and many consumers found it difficult to return bottles to the shops. Making it easier for consumers to return the bottle would appear to be a more effective method of raising trippage than increasing the deposit levels.     

Motivations for Adopting the ISO 14001 Standard: A Study of Spanish Industrial Companies

This article analyzes what motivates companies to obtain ISO 14001 certification and what factors within companies determine the success or failure of the environmental management standard. The most important motivators appear to be the worldwide recognition accorded the ISO 14000 norm, and its applicability to all sectors. The factors that most contribute to success are the company's experience in management systems and involvement by management. Failure most often results from lack of employee training and organizational rigidity. © 2001 John Wiley & Sons, Inc.     

Agroforestry practices,runoff, and nutrient loss: a paired watershed comparison

A paired watershed study consisting of agroforestry (trees plus grass buffer strips), contour strips (grass buffer strips), and control treatments with a corn (Zea mays L.)-soybean [Glycine max (L.) Merr.] rotation was used to examine treatment effects on runoff, sediment, and nutrient losses. During the (1991-1997) calibration and subsequent three-year treatment periods, runoff was measured in 0.91- and 1.37-m H-flumes with bubbler flow meters. Composite samples were analyzed for sediment, total phosphorus (TP), total nitrogen (TN), nitrate, and ammonium. Calibration equations developed to predict runoff, sediment, and nutrients losses explained 66 to 97% of the variability between treatment watersheds. The contour strip and agroforestry treatments reduced runoff by 10 and 1% during the treatment period. In both treatments, most runoff reductions occurred in the second and third years after treatment establishment. The contour strip treatment reduced erosion by 19% in 1999, while erosion in the agroforestry treatment exceeded the predicted loss. Treatments reduced TP loss by 8 and 17% on contour strip and agroforestry watersheds. Treatments did not result in reductions in TN during the first two years of the treatment period. The contour strip and agroforestry treatments reduced TN loss by 21 and 20%, respectively, during a large precipitation event in the third year. During the third year of treatments, nitrate N loss was reduced 24 and 37% by contour strip and agroforestry treatments. Contour strip and agroforestry management practices effectively reduced nonpoint-source pollution in runoff from a corn-soybean rotation in the clay pan soils of northeastern Missouri.     

Capturing change in European food assistance practices: a transformative social innovation perspective

The food system’s decreasing ability to deliver food security has led to the emergence of food assistance initiatives. Food assistance is highly contested; as some argue, it is a “failure of the state”, while others regard food assistance to be an “extension of the welfare state”. Either way, research suggests that actors within food assistance are rethinking their role in the food system. In this paper, we study three food assistance initiatives, in the Netherlands, Italy and Ireland, that perform new food assistance practices while embedded in specific institutional contexts, and analyse their potential to transform the food system, drawing on Transformative Social Innovation theory. Building on transition and social innovation theory, this recently developed theory distinguishes different levels within systems, named “shades of change”, that are associated with societal transformation. By exploring these “shades” of change in the analysis, we describe aspects of the initiatives’ novel practices, and in relation to the initiative and institutional relations their motivations and expectations. We compare the three cases and discuss how food assistance practices relate to and change (or do not change) the food system. In particular, we elaborate on how these three food assistance initiatives contribute in various ways to local food and welfare system innovation. In doing so, we offer a novel perspective on food assistance initiatives. We argue that they show dynamics that have the potential for more substantial transformation towards food security over time, by building momentum through “small wins”.     

Use of recycled natural fibres in industrial products: A comparative LCA case study on acoustic components in the Brazilian automotive sector

This paper summarizes the results and the lessons learnt from an LCA case study comparing acoustic automotive components. Three alternative acoustic components produced by the Brazilian automotive sector are considered: dual-layer polyurethane (DL-PU) panel, recycled textile absorption-barrier-absorption (ABA-cotton) panel and recycled textile DL (DL-cotton) panel. DL-PU is a “status-quo” alternative, composed mainly of synthetic plastics and the two other alternatives are mainly made of recycled cotton fibres. Using the Life Cycle Assessment (LCA) method, the three following phases of the panels’ life cycle are examined: production, use and end-of-life. For the latter, two end-of-life scenarios are analysed: landfill and incineration with energy recovery. For the LCA model, some Life Cycle Inventory (LCI) datasets have been adapted from the data available in the EcoInvent database in order to adjust to the Brazilian context. LCA results show that, within the entire life cycle, the DL-cotton option, which combines two layers of recycled fibres of different densities, is overall the best alternative from an environmental perspective. This result is therefore independent from the end-of-life scenario. This is mainly due to the lower weight of this component, which is extremely important for the transportation aspects, but also due to its lower consumption of fossil resources, to the energy saving during its production and to the avoidance of textile disposal that would happen otherwise. The obtained results confirm the available literature dealing with the use of renewable fibres in industrial products. The particular behaviour of recycled fibres compared to virgin ones (in terms of shared contribution of agricultural production and of avoidance of landfilling) is highlighted in this paper, thanks to the application of the “50/50” allocation rule. LCA results are discussed in terms of their potential use in an R&D context. Further research needs are also derived from the case study, including the potential benefits of developing multi-objective optimization methods that include environmental impact to be used in the design of such a component.