径轴向辗环机优化轧制规程的计算机辅助设计

此文介绍了利用数字计算机进行矩形截面环轧制的优化规程设计方法,优化是基于轧制过程的物理模型,考虑了各种轧制约束条件,结果符合实际生产情况,并且可使轧机容量得到充分利用,大大缩短轧制所需时间,节约材料与能源消耗。     

非对称交叉轧制压力研究与分析

对冷轧条件下非对称交叉轧制情况下变形区金属流动状态进行了分析 ,建立了总轧制压力计算公式 ,并用理论与实验两方面进一步分析了轧制压力与交叉角之间的关系。     

机械零件毛坯轧制的进展及在我国应用的看法

机械零件毛坯轧制是制造机械零件的高效、经济的方法。文章介绍了用轧制方法轧制机械零件毛坯的工艺及其改进。     

入口侧辊板非对称接触轧制时的变形效应

针对中厚板轧制时前端部板形翘曲这一生产中常见的技术问题,在轧机上通过静态压缩、轧制试验,观察、分析了入口侧辊板非对称接触对轧制过程的影响.探讨了轧制时变形区几何形状系数l/对轧件前端部翘曲的影响规律.指出入口侧辊板非对称接触轧制时,金属沿高向变形与流动、应力分布呈非对称状态,使金属沿高向上的纵向流动不均匀,这是导致轧件出辊缝后前端部翘曲的主要因素之一.     

含铌微合金钢热连轧过程中组织演变及工艺参数的预测

采用有限元计算模型对热连轧生产过程中带钢断面温度场的分布进行了预测,建立了描述含铌微合金钢软化行为的再结晶模型及计算精轧过程应力-应变曲线的流变应力模型。在此基础上,对X46级管线钢工业轧制中的奥氏体再结晶动力学、微观组织演变及精轧的轧制力、轧制力矩、轧制功率进行了预测,结果与实测值吻合较好,反映了工业生产的实际。     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

采用大变形弹塑性有限元法对带材异步冷轧过程的数值模拟

此文采用纠正的拉格朗日列式和基于弹塑性乘法分解的超弹性塑性本构关系,对铝带在不同轧制条件下的异步冷轧过程进行了大变形弹塑性有限元模拟.结果表明,在异步轧制时,轧制力对工作辊辊径的变化表现出非敏感性,而且由于搓轧区的存在,使得变形区内静水压力的绝对值比同步轧制时要小得多.     

钼片轧制工艺的研究

为了避免钼片在轧制过程中出现边部裂纹.对钼片的轧制工艺进行了新的探索.结果表明:钼的轧制开坯温度在1300℃～1400℃为最佳.开坯道次加工率应大于30%,一火多道开坯工艺较一火一道开坯工艺更能避免裂纹的出现.     

药芯焊带轧制成形工艺参数实验研究

以典型的矩形断面形状药芯焊带轧制成形过程为研究对象,通过实验测试,得出了成形时主要工艺参数与相对压下量之间的变化规律,为药芯焊带轧制成形工艺设计提供了理论指导。     

阶梯形异型悬臂导轨钢的开发研制

此文在实验的基础上介绍了研制截面为阶梯形异型悬臂导轨钢的工艺过程。重点论述了轧制工艺过程和分析了拉伸矫直工艺过程机理,用轧制的方法生产出合格的阶梯钢,使进口设备易损件国产化。     

车门框条滚压成形工艺及滚压线设计

以X110型车门为例,分析零件工艺性,介绍滚压成形工艺过程,强调在模具设计和制作中应注意的问题。设计由滚压、校正、滚焊和自动断料等工艺流程组成的滚压线,可作为类似滚压工艺参考。     

行星滚丝工艺研究

此文对行星滚丝原理进行了深入细致的研究,在此基础上着重讨论了其滚压工具的设计与修复问题,并应用实例作了验证。     

Design of Profile Ring Rolling by Backward Simulation Using Upper Bound Element Technique (UBET)

The upper bound element technique (UBET) is used to determine the optimum intermediate shape for profile ring rolling using backward simulation. The lowest energy rate is the key issue in achieving the optimal intermediate shape as well as the backward simulation of the process. The plastic flow of material in ring rolling is assumed to be a sequence of successive closed-die forging processes. The ring is divided into features, which provide an approximated profile consisting of a number of rectangular elements. The simulation of the profile ring rolling was tested with different profiles of rolls, and two such cases are presented here. The present method was validated using an experimental radial ring rolling mill designed and fabricated in the Dept. of Mechanical Engineering at Ohio University for the investigation of both cold and hot ring rolling processes. As the results show, this technique is capable of solving the backward simulation of profile ring rolling problems in a much shorter time compared to the finite element method (FEM), which cannot easily simulate profile ring rolling. Moreover, as an engineering tool, this approach can be applied effectively to the profile ring rolling process and can serve as a useful tool in industrial applications.     

Stability Analysis of Chatter on a Tandem Rolling Mill

Accurate prediction of the onset of chatter is difficult in designing and operating a rolling mill. Both the lack of precise rolling process models and analytical methods for the investigation of mill stability have forced designers and users to rely on experience and trial and error, which are time consuming and cost demanding. A comprehensive rolling process model is introduced to form the foundation of chatter analysis that includes a range of possible process variations. Analytical chatter models for both single and multiple-stand rolling mills are constructed that account for interactions between mill structure and rolling process, as well as between adjacent stands. Stability analysis is performed to formulate criteria for rolling mill design and operation. Finally, simulations and experiments are presented to verify some basic components of the rolling process model that constitute the proposed chatter models.     

The effect of cold rolling on the foaming efficiency of aluminium precursors

The objective of the present study is to investigate the role of cold rolling on the foaming ability (or foamability) of aluminium precursors, made by continuous rotary extrusion, a process performed at elevated temperature, starting by powder. For this purpose, the effect of different parameters including initial shape of precursors, rolling direction, amount of deformation in each rolling pass and final thickness of rolled specimens are experimentally investigated. Furthermore, the foaming efficiency of both rolled precursors and as-received extruded ones is compared. To clarify the role of secondary processing operations on the foaming efficiency, precursor samples are prepared following different forming and machining process chains, before the final foaming operation. Finally, hardness tests are performed on as-received precursors and rolled samples to notice the correlation between rolling parameters, state of strain, foaming efficiency and hardness. The results of the study show that: (a) cold rolling considerably improves foamability, (b) rectangular precursor bars have higher foaming efficiency than round ones, both before and after cold rolling. Besides, the improvement in foamability due to cold rolling is greater if precursors are rolled in the extrusion direction, rather than the orthogonal direction.     

导布辊辊筒加工用辘头、辘模和辘床

分析了导布辊辊筒加工中的一个重要工艺辘圆工艺。论述了完成这个工艺的装备 ,辘头、辘模和辘床的一些设计方法     

连续轧制异型线材工艺分析

结合用盘条生产药芯焊丝过程 ,对冷态金属连续轧制成形工艺特点进行了多方面的分析 ,特别是在改善连轧稳定性、提高轧制精度、降低能耗、减少设备成本等方面 ,提出了一些改进措施。