Quantification of polychlorinated biphenyl contamination using human placenta as biomarker from Punjab Province,Pakistan

Environmental Science and Pollution Research - The present study biomonitored the placental polychlorinated biphenyl (PCB) concentrations in women from Punjab Province, Pakistan, that provides the...     

Mixture effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin and polychlorinated biphenyl congeners in rats

Concern of the toxic effects and bioaccumulation of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and polychlorinated biphenyls in the environment continues to be a focus of research in persistent organochlorine contaminants. Groups of five adult female S.D. rats were administered by gavage 0, 2.5, 25, 250 or 1000 ng TCDD/kg body weight/day or TCDD in combination with a mixture of PCB congeners (PCBs) at 2 or 20 microg/kg b.w./day for a period of 28 days. Growth suppression, increased absolute and relative liver weights, and decreased thymic weight were observed in either the 1000 ng TCDD group alone, or the groups receiving a mixture of 1000 ng TCDD + 2 microg PCBs. The TCDD induced increases in liver and thymic weights were not altered by co-administration with PCBs, however, growth suppression appeared to be more pronounced in the group receiving 1000 ng TCDD + 2 microg PCBs than with TCDD alone. Treatment with TCDD at 250 ng and 1000 ng/kg resulted in a significant increase in hepatic microsomal methoxy resorufin-O-demethylase and ethoxy resorufin-O-deethylase activities which were antagonized by co-administration with PCBs. Similarly, effects of 250 ng TCDD on serum cholesterol and liver UDP glucuronosyl transferase activity and ascorbic acid were significantly reduced by co-administration with 20 microg PCBs. Other biochemical effects elicited by treatment with 1000 ng TCDD, but not affected by co-administration with PCBs include the following: increased serum albumin, decreased liver vitamin A, and increased kidney vitamin A and liver microsomal glutathione-S-transferase activity. While decreased hemoglobin, platelet, packed cell volume and red cell indices were observed in TCDD treated rats, no interactive effects were seen. The above results indicate that the mixture effects of PCBs and TCDD may be additive or antagonistic depending on the dose level and endpoints measured. For the purpose of predicting mixture effects, knowledge of mechanisms of action and toxicokinetics is required.     

Formation and stability of polychlorinated biphenyl Pickering emulsions

An emulsion stabilized by colloidal suspensions of finely divided solids is known as a Pickering emulsion. The potential for polychlorinated biphenyls (PCBs) to form Pickering emulsions ex situ when in contact with powdered solids, such as clays and metal oxides, is investigated here. Bentonite, iron oxide and magnesium oxide dispersions proved to be robust Pickering emulsion stabilizers, whereas manganese oxide dispersions were not. Batch experiments revealed that emulsions can be formed using a moderately low energy input and can be stabilized with solid concentrations as low as 0.5 wt.%. For the base conditions (volumetric oil fraction (phi(oil))=30 vol.%; solid concentration (chi)=2 wt.%), the formed emulsions were indefinitely stable and the initial average droplet diameters varied from 80 to 258 mum, depending on the solid used in the colloidal dispersion. The average droplet size varied at early time, but for most conditions stabilized to a steady-state value 1 week after preparation. The effect of Ostwald ripening was limited. At greater than 0.5 wt.% concentration, the efficiency of the solid dispersion as a stabilizer was dependant on the volumetric oil fraction but not on the solid concentration. Generally, systems with volumetric oil fractions outside of the 20-70 vol.% range were unstable. The emulsions' droplet stability, average droplet size and size distribution were observed to vary as a function of the amount of energy provided to the system, the volumetric oil fraction, and the concentration of the solid in the aqueous dispersion. It is hypothesized that drilling through fractured rock in the immediate vicinity of dense, non-aqueous phase liquid (DNAPL) PCBs may provide both the energy and solid material necessary to form Pickering emulsions.     

A case of polychlorinated biphenyl contamination of water and sediment in the Slovenian karst region (Yugoslavia)

An incident is described in which polychlorinated biphenyls (PCBs) from an electro-industrial plant waste tip draining into ground-water channels in karst terrain have contaminated a potable water source. PCB composition data were obtained using quadropole GC-MS and capillary GC. The average level of PCBs determined in water was 0.3 μg 1^?1 and in sediment 55 μg g^?1     

Testicular histopathology in deer mice (Peromyscus maniculatus) following exposure to polychlorinated biphenyl

Adult deer mice testes were subjected to routine histopathology following exposure to Aroclor 1254 supplemented diet (5 ppm), for 30 days. Body and testicular weight revealed no statistical significance between the control and treated animals. From a histological standpoint the testes of the controls were similar to normal murids and other animals. In contrast, the testes from treated animals displayed seminiferous tubules with significant degenerative alterations. These alterations included fewer layers of seminiferous epithelium exaggerated intercellular spaces and appearance of pyknotic nuclei. Most tubules displayed subluminal nuclei that morphologically could be identified as part of spermatozoa heads and these usually lacked tails, indicating that the treatment interfered with spermiogenesis. Therefore, we concluded that Aroclor 1254 as an environmental contaminant is highly destructive to seminiferous tubules, and that these histological alterations undoubtedly are responsible for the depressed fertility in Peromyscus following chronic exposure to PCBs, that has been reported in the literature.     

Modeling polychlorinated biphenyl sorption isotherms for soot and coal

Sorption isotherms (pg-ng/L) were measured for 11 polychlorinated biphenyls (PCBs) of varying molecular planarity from aqueous solution to two carbonaceous geosorbents, anthracite coal and traffic soot. All isotherms were reasonably log-log-linear, but smooth for traffic soot and staircase-shaped for coal, to which sorption was stronger and more nonlinear. The isotherms were modeled using seven sorption models, including Freundlich, (dual) Langmuir, and Polanyi-Dubinin-Manes (PDM). PDM provided the best combination of reliability and mechanistically-interpretable parameters. The PDM normalizing factor Z appeared to correlate negatively with sorbate molecular volume, dependent on the degree of molecular planarity. The modeling results supported the hypothesis that maximum adsorption capacities (Q_max) correlate positively with the sorbent’s specific surface area. Q_max did not decrease with increasing sorbate molecular size, and adsorption affinities clearly differed between the sorbents. Sorption was consistently stronger but not less linear for planar than for nonplanar PCBs, suggesting surface rather than pore sorption.     

Mosses as biomonitors of atmospheric heavy metal deposition: Spatial patterns and temporal trends in Europe

In recent decades, mosses have been used successfully as biomonitors of atmospheric deposition of heavy metals. Since 1990, the European moss survey has been repeated at five-yearly intervals. Although spatial patterns were metal-specific, in 2005 the lowest concentrations of metals in mosses were generally found in Scandinavia, the Baltic States and northern parts of the UK; the highest concentrations were generally found in Belgium and south-eastern Europe. The recent decline in emission and subsequent deposition of heavy metals across Europe has resulted in a decrease in the heavy metal concentration in mosses for the majority of metals. Since 1990, the concentration in mosses has declined the most for arsenic, cadmium, iron, lead and vanadium (52-72%), followed by copper, nickel and zinc (20-30%), with no significant reduction being observed for mercury (12% since 1995) and chromium (2%). However, temporal trends were country-specific with sometimes increases being found.     

Accumulation and tissue distribution of selected polychlorinated biphenyl congeners in chickens

During one to three consecutive periods of 2 weeks, broiler chickens (n = 108) received test dies to which different amount of PCBs (7 congeners) were added. The relationship between exposure time and accumulation of individual congeners in different chicken tissues, such as breast, thigh and abdominal fat tissue, was observed. In all tissues, the vast majority of the PCB accumulation occurred during the first 2 weeks of exposures. After that, PCB concentrations only increased in the abdominal fat tissue of the animals. The individual PCBs were distributed differently in the various tissues. While CBs 28, 118, 138, 153 and 180 accumulated in the chickens, CBs 52 and 101 were metabolized, but no methyl sulphone metabolites of these congeners could be detected. Our results provide information on the absorption, tissue distribution and biotransformation of the individual PCB congeners and confirm the structure-activity relationships for metabolism of PCBs in birds, which are different from those in fish or mammalian species.     

Distribution of trace metals in moss biomonitors and assessment of contamination sources in Portugal

A biomonitoring survey using the moss species [Hypnum cupressiforme Hedw. and Scelopodium touretii (Brid.) L. Kock] was performed in the whole territory of Portugal, in order to evaluate the atmospheric deposition of the following elements: Cd. Cr, Cu, Fe, Mn, Ni, Pb and Zn. The concentrations of the same elements were also obtained in two types of soil samples, collected under the moss and in nearby plots without any plant coverage, and relationships between moss and soil concentrations was investigated using the multivariate statistical method of Co-inertia Analysis. Also, relationships between concentrations in moss and several anthropogenic, geologic, pedologic and environmental parameters were screened using the same method of Co-inertia Analysis. Higher concentrations of Cu, Pb and Zn were found in areas of higher population density, with higher gasoline consumption, while higher values of Fe and Cr occur in the driest region, with lower plant coverage, indicating strong contamination by resuspended soil particles. Results also show good agreement between moss and soil contents, even for elements with high contribution of anthropogenic sources. The spatial pattern in Portugal of element contents in mosses were also detected and discussed in relation to local contamination sources.     

Physicochemical characteristics of carbonaceous adsorbent for dioxin-like polychlorinated biphenyl adsorption

It has been known that dioxin-like polychlorinated biphenyls (DL-PCBs) are present in almost all types of environments worldwide. Activated carbon treatment has been expected for the removal of DL-PCBs because it is a simple and low-cost removal technology. In the present study, the physicochemical properties of activated carbon were investigated to identify the characteristics of 16 different types of activated carbon on adsorption properties for DL-PCBs. To accomplish this, micropore volume, and pore diameter were calculated by t-plot analysis and the mesopore volume was analyzed by the Barrett-Joyner-Halenda (BJH) method. In addition, the Brunauer-Emmett-Teller (BET) surface area, pH, metal elements, and surface acid functional groups were analyzed. Then, adsorption experiments using DL-PCB in hexane solution were conducted, and the relationship between adsorption and physicochemical properties of activated carbon was investigated. The results showed that activated carbons having a surface area of 700-1200 m² g⁻¹ and micropores with diameters of about 0.7-0.8 nm exhibited high activity for the adsorption of PCBs. The results also clearly showed that the mesopore volume of activated carbon influenced the adsorption rate and the equilibrium adsorption.     

Biodegradation of polychlorinated biphenyls using biofilm grown with biphenyl as carbon source in fluidized bed reactor

This study investigated the use of biofilms in the biodegradation of polychlorinated biphenyls. The biofilm used was developed on modified cement particles using mixed microbial culture isolated from PCB-contaminated soil. The biofilm formed was first acclimatized to PCBs by feeding the reactor alternately with biphenyl and PCBs. The acclimatized biofilm was tested on simulated PCB-contaminated water containing Aroclor 1260 by using a three-phase fluidized-bed reactor operated in batch mode. The initial batch run yielded 80+/-2.38% PCB removal from medium in one day and 91+/-1.34% in 5 days. The percent PCB removal gradually increased in the succeeding runs reaching 92+/-2.48% in one day and a steady state value of 95+/-2.01% in 5 days from batch eight onwards. PCB removal from the medium was highest during the first day reaching 80-92%. The sudden decrease in PCB concentration was attributed to an initial adsorption of the PCB on the biofilm and then the compound was degraded gradually. Yellow intermediates were observed as the pH of the medium decreased. These intermediate products were further metabolized as indicated by the disappearance of the yellow substance.     

Source and spatial distribution of airborne heavy metal deposition studied using mosses as biomonitors in Yancheng,China

Environmental Science and Pollution Research - Naturally growing mosses have been successfully used as biomonitors of atmospheric heavy metal (HM) deposition. In recent years, with rapid economic...     

Testing the use of juvenile Salmo trutta L. as biomonitors of heavy metal pollution in freshwater

Individual specimens of Salmo trutta were captured, from four sampling sites in Galician rivers (NW Spain) affected by different types of contamination: diffuse urban waste, run-off from an unrestored dump at a copper mine and waste from a fish farm. The ages of the captured trouts were established and only those belonging to the 1+ age class were selected for study. The liver and kidney were removed from each fish and analysed to determine the tissue concentrations of Cu, Fe and Zn. The results obtained showed that: (i) the use of 1+ individuals allowed differentiation of contamination scenarios on the basis of the tissue concentrations of metal; (ii) the use of 1+ individuals allowed standardization of the time of exposure, which was sufficiently long for differential uptake to have taken place; (iii) liver tissue provided the best results as, less effort was required than for processing kidney tissue, and significant differences between sampling sites were detected because the intrapopulational variability in metal levels was lower than for kidney, and (iv) the levels of elements detected were not affected by basal tissue concentrations or residual concentrations due to past contamination, which older trouts may have been exposed to. In addition, the use of 1+ trout may provide better results in annual environmental sampling surveys.     

Synthesis of mono- and dimethoxylated polychlorinated biphenyl derivatives starting from fluoroarene derivatives

Environmental Science and Pollution Research - Polychlorinated biphenyls (PCBs) are environmental pollutants implicated in a variety of adverse health effects, including cancer and noncancer...     

Characteristics of sorption losses of polychlorinated biphenyl congeners onto glass surfaces

Sorption losses to glass surfaces of five polychlorinated biphenyl (PCB) congeners in aqueous solutions were investigated. Adsorption/desorption experiments were conducted under conditions that simulated actual sample handling procedures for environmental samples. It was found that the adsorption loss is related to the degree of chlorination. PCB congener 180 lost the most onto glass surfaces, followed by congeners 138, 101/28, and 52, in decreasing order. More PCB adsorption occurred onto glass under conditions of agitation and higher temperature (22°C) during the five-day experimental period. The salinity effect (“salting out effect”) was also observed in this work. The efficiency of desorption (rinsing three times with solvent) was found to be ineffective in extracting adsorbed PCBs. It was necessary to use mechanical shaking for extraction. Storage of samples up to five days resulted in sorption losses as much as 30%, 17%, 30%, 40%, and 55% of PCB 28, 52, 101, 138, and 180, respectively. Sorption losses need to be considered when conducting water sampling or toxicological studies to avoid underestimation of the actual PCB concentrations and their toxic effects.     

Selected organochlorine pesticide and polychlorinated biphenyl residues in house dust in Singapore

Although the use of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) has been prohibited in Singapore since 1980, OCPs and PCBs still can be detected in the environment and represent a potential threat to public health. In this study, OCPs and PCBs were measured in house dust samples collected from 31 homes across the island-state of Singapore. Organochlorine pesticides, such as hexachlorocyclohexanes (HCHs), chlordanes and dichlorodiphenyltrichloroethanes (DDTs) were tested, with a range of 相似文献   

Date palm (Phoenix dactylifera L.) leaves as biomonitors of atmospheric metal pollution in arid and semi-arid environments

The leaves of date palms were evaluated as a possible biomonitor of heavy metal contamination in Ma’an city, Jordan. Concentrations of (Fe), (Pb), (Zn), (Cu), (Ni), and (Cr) were determined in washed and unwashed leaves and soil samples collected from different sites with different degrees of metal contamination (urban, suburban, industrial, highway and rural sites); separate leaves were taken from outside the city to be used as a control sample. Samples collected from industrial sites were found to have high concentrations of all metals except those of Cu, Ni and Pb, which were found at high levels in the highway site samples which is associated with the road traffic. The difference between unwashed and washed samples showed that metal pollutants exist as contaminants, particularly Pb, Zn and Ni, which varied in concentration, depending on the source of the metal.     

Theoretical evaluation of the configurations and Raman spectra of 209 polychlorinated biphenyl congeners

Though polychlorinated biphenyls (PCBs) have distributed as threats in the environment to human beings for several decades, monitoring of trace level PCBs in-field is still a challenge. As a potential method for monitoring PCBs at trace levels, Raman spectroscopy has been used to detect several PCBs in the laboratory. To facilitate the development of rapid detection of PCBs by Raman spectroscopy, it is essential to investigate the Raman spectra of all PCB congeners. Herein, the stable configurations and vibrational spectra of all the PCB congeners were calculated by Gaussian 03 program package. Based on molecular symmetry, PCBs are classified into seven groups. The structural features and the normal vibration modes for each group are discussed. Taking the C(2)-2 group as an example, the wavenumber ranges of the various normal vibration modes in the Raman spectra of PCBs were analyzed. The accuracy of calculated results was verified by experimental Raman spectra of PCB77 standard. This study can elucidate further information to promote the development of Raman spectroscopy in environmental monitoring.     

Investigation of polychlorinated biphenyl removal from contaminated soil using microwave-generated steam

A feasibility study of polychlorinated biphenyl (PCB) removal from contaminated soils using microwave-generated steam (MGS) was performed. Initial experimental results show that MGS effectively removed PCBs from contaminated soil with an overall removal efficiency of greater than 98% at a steam-to-soil mass ratio of 3:1. Removal efficiency was found to be dependent upon the amount of steam employed, expressed as a mass ratio of steam applied to soil mass. Evaporation was identified as a major mechanism in removing PCBs from the soil. Rapid expansion and evaporation of pore water by microwave dielectric heating accelerated evaporation rates of PCB molecules. Increased solubility of PCBs into the heated aqueous phase is also hypothesized. Together these effects increase mass-transfer rates, thus enhancing removal of PCBs from the soil.