组态视角下制度和资源因素对城市绿色技术创新的影响研究

城市绿色技术创新是推动我国经济高质量发展和绿色转型的关键要素。以173个城市为案例,结合制度基础观与资源基础观理论,应用模糊集定性比较分析法(fsQCA)和必要条件分析法(NCA)探究了制度环境和资源投入对城市绿色技术创新的协调联动关系,剖析了驱动城市绿色技术创新的多重并发因果机制和多元路径。结果发现:(1)单一的制度环境或资源投入均无法有效激励城市绿色技术创新,需要二者联动匹配才能促进绿色技术创新。(2)产生高绿色技术创新的组态路径包括5种:媒体关注—外资—人才投入驱动型、环境规制—资源投入驱动型、公众—媒体关注—内资投入驱动型、公众关注—内资—人才投入驱动型和多要素复合驱动型。     

河南省技术创新环境与中部其它5省的对比分析

随着区域经济的发展,创新是时代的最显著特征,因此强化对区域创新环境的研究显得非常重要。只有建立良好的区域创新环境,才能形成更大规模的经济增长效应。对比了中部6省,分析了河南省的技术创新环境在中部6省中的地位以及其优势和劣势,指出了影响技术创新环境的主要问题,提出了培育良好的技术创新环境的基本途径。     

深化体制改革建立环境科技创新体系

贯彻全国技术创新大会精神和《中共中央、国务院关于加强技术创新,实现产业化的决定》,环保系统当前的首要任务就是要通过深化改革,建立环境科技创新体系,并亟待解决三个主要方面的问题。 一、要充分认识科技体制改革的必要性和紧迫性 深化科技体制改革,加速科学技术创新步伐,是党中央、国务院的重要部署,是社会主义市场经济发展的必然要求。去年党中央和国务院发布了《关于加强技术创新,发展高科技,实现产业化的决定》,并召开了全国技术创新大会,目的就是要解决科学技术与经济发展的结合问题。要通过加强技术创新,推动社会生产…     

公众投诉、环境规制对工业技术创新的影响研究

在碳达峰碳中和背景下,工业如何实现环保、科技与经济的共同进步已成为中国亟待解决的难题。本文基于中国工业2008—2018年的省级面板数据,建立动态面板模型,采用系统广义矩（GMM）估计方法,对现代环境治理体系中公众投诉、环境规制及工业技术创新三者的关系进行了探讨。结果表明：①公众投诉、环境规制成为直接推动工业技术创新产出的重要因素;②环境规制在公众投诉影响工业技术创新产出的过程中发挥着部分中介作用;③产业集聚强化了公众投诉对工业技术创新的促进作用。因此,完善公众投诉制度、提升公众环保意识、加强环境规制强度、优化政策支持及提升产业集聚程度,对于工业实现经济绩效与环境绩效的双赢具有重要意义。     

推进青海省环境技术创新的思考

本文通过对青海省环境技术创新现状分析,提出对青海省环境保护和经济发展具有针对性的新路径及对策.     

环境规制对技术创新效率的影响分析——基于创新链视角的两阶段实证检验

新古典经济学理论认为,严格的环境规制会提高污染治理成本,挤占技术创新活动的资金,对技术创新产生"挤出效应"。而"波特假说"认为,长期内适当的环境规制政策将对企业的科技创新活动起到刺激性推动作用,可弥补因规制而增加的额外成本,从而形成"创新补偿效应"。这个观点表明环境规制对于企业的技术创新可能存在非线性影响效应。另外,技术创新要经历研究开发阶段与成果转化阶段,即从资源投入到产生经济效益的过程。本文基于系统观和创新链视角,创新性地构建两阶段关联DEA模型测算技术创新活动的投入产出效率,并运用中国2011——2017年间的省级面板数据进行回归检验,探讨环境规制强度对研究开发阶段和成果转化阶段技术创新效率的非线性影响效应,同时将中国划分为东部、中西部两大区域分别考察,进一步揭示环境规制对技术创新效率影响的空间异质性和阶段性特点,最后提出相应政策建议。     

科技型中小企业技术创新基金引导了环境技术的创新和提高

分析了科技型中小企业技术创新基金支持环境技术项目的基本情况、支持项目的特点和存在的问题。     

环境发展中心召开第七次全国环境保护大会学习研讨会

为学习贯彻第七次全国环境保护大会和全国环境保护工作会议精神,积极探索环境保护新道路,开创环保新局面,环境保护部环境发展中心今日组织召开研讨会,从环境政策创新、环境管理创新、环境技术创新三方面探讨如何推动"十二五"环保工作再上新     

经济增长目标、融资约束与污染企业绿色技术创新

经济增长目标作为中国政府宏观经济管理的一个重要手段,不仅会影响宏观经济绩效,还会显著影响微观经济主体的行为和绩效。本研究借助中国2004—2019年沪深A股上市污染企业数据,采用固定效应模型,从绿色技术创新视角考察了经济增长目标对微观企业的影响效应,并检验了融资约束在经济增长目标与污染企业绿色技术创新活动之间的中介效应。结果显示,经济增长目标会加剧融资约束,进而抑制企业绿色技术创新。同时,在“硬约束”情形、重污染企业和非国有企业中,经济增长目标对企业绿色技术创新的抑制效应更显著,而环境目标会弱化这种负向作用。本文丰富了经济增长目标影响微观企业绩效的相关研究,并为地方政府科学设定经济增长目标、更好平衡经济增长目标与环境目标之间关系以及促进污染企业绿色转型升级提供了理论依据和政策参考。     

环境规制下技术创新导向的黑龙江省生态补偿机制研究

在述评黑龙江生态补偿实践现状的基础上,分析其存在的相关问题。鉴于技术补偿的重要性和环境规制对技术创新的激励作用,充分结合政府和市场手段,从技术创新导向作用的视角研究构建黑龙江生态补偿机制实施框架体系,提出进一步完善黑龙江省生态补偿机制的思路,为我国制订区域生态补偿机制和政策提供借鉴。     

Environmental justice: A louisiana case study

The paper begins with a brief analysis of the concepts of environmental justice and environmental racism and classism. The authors argue that pollution- and environment-related decision-making is prima facie wrong whenever it results in inequitable treatment of individuals on the basis of race or socio-economic status. The essay next surveys the history of the doctrine of free informed consent and argues that the consent of those affected is necessary for ensuring the fairness of decision-making for siting hazardous facilities. The paper also points out that equal opportunity to environmental protection and free informed consent are important rights. Finally, it presents a case study on the proposed uranium enrichment facility near Homer, Louisiana and argues that siting the plant would violate norms of distributive equity and free informed consent. It concludes that siting the facility is a case of environmental injustice and likely an example of environmental racism or classism.     

Betaine removal during thermo- and mesophilic aerobic batch biodegradation of beet molasses vinasse: influence of temperature and pH on the progress and efficiency of the process

The key issue in achieving a high extent of biodegradation of beet molasses vinasse is to establish the conditions for the assimilation of betaine, which is the main pollutant in this high-strength industrial effluent. In the present study, aerobic batch biodegradation was conducted over the temperature range of 27-63°C (step 9°C), at a pH of 6.5 and 8.0, using a mixed culture of bacteria of the genus Bacillus. Betaine was assimilated at 27-54°C and the pH of 8.0, as well as at 27-45°C and the pH of 6.5. The processes where betaine was assimilated produced a high BOD(5) removal, which exceeded 99.40% over the temperature range of 27-45°C at the pH of 8.0, as well as at 27°C and the pH of 6.5. Maximal COD removal (88.73%) was attained at 36°C and the pH of 6.5. The results indicate that the process can be applied on an industrial scale as the first step in the treatment of beet molasses vinasse.     

Environmental assessment of packaging: Sense and sensibility

The functions of packaging are derived from product requirements, thus for insight into the environmental effects of packaging the actual combination of product and package has to be evaluated along the production and distribution system. This extension to all related environmental aspects adds realism to the environmental analysis and provides guidance for design while preventing a too detailed investigation of parts of the production system. This approach is contrary to current environmental studies where packaging is always treated as an independent object, neglecting the more important environmental effects of the product that are influenced by packaging. The general analysis and quantification stages for this approach are described, and the currently available methods for the assessment of environmental effects are reviewed. To limit the workload involved in an environmental assessment, a step-by-step analysis and the use of feedback is recommended. First the dominant environmental effects of a particular product and its production and distribution are estimated. Then, on the basis of these preliminary results, the appropriate system boundaries are chosen and the need for further or more detailed environmental analysis is determined. For typical food and drink applications, the effect of different system boundaries on the outcome of environmental assessments and the advantage of the step-by-step analysis of the food supply system is shown. It appears that, depending on the consumer group, different advice for reduction of environmental effects has to be given. Furthermore, because of interrelated environmental effects of the food supply system, the continuing quest for more detailed and accurate analysis of the package components is not necessary for improved management of the environmental effects of packaging.     

AN INDEX FOR MEASURING THE PERFORMANCE OF IRRIGATION MANAGEMENT SYSTEMS WITH AN APPLICATION1

ABSTRACT: This paper presents a statistically valid index for measuring the performance of irrigation systems. The index is applied to a sample of 39 farms on a watercourse under the warabandi system of irrigation management in India. It is found that while the farmers in fact irrigated almost exactly the total amount of irrigated area as designed, inter-farm variations were considerable. The index shows that the degree of error of managerial effectiveness of irrigation on this watercourse is 20 percent. Therefore it is concluded that the system is performing at 80 percent effectiveness.     

Surface applied water treatment residuals affect bioavailable phosphorus losses in Florida sands

Water treatment residuals (WTR) can reduce runoff P loss and surface co-application of P-sources and WTR is a practical way of land applying the residuals. In a rainfall simulation study, we evaluated the effects of surface co-applied P-sources and an Al-WTR on runoff and leacheate bioavailable P (BAP) losses from a Florida sand. Four P-sources, namely poultry manure, Boca Raton biosolids (high water-soluble P), Pompano biosolids (moderate water-soluble P), and triple super phosphate (TSP) were surface applied at 56 and 224kgPha(-1) (by weight) to represent low and high soil P loads typical of P- and N-based amendments rates. The treatments further received surface applied WTR at 0 or 10gWTRkg(-1) soil. BAP loss masses were greater in leachate (16.4-536mg) than in runoff (0.91-46mg), but were reduced in runoff and leachate by surface applied WTR. Masses of total BAP lost in the presence of surface applied WTR were less than approximately 75% of BAP losses in the absence of WTR. Total BAP losses from each of the organic sources applied at N-based rates were not greater than P loss from TSP applied at a P-based rate. The BAP loss at the N-based rate of moderate water-soluble P-source (Pompano biosolids) was not greater than BAP losses at the P-based rates of other organic sources tested. The hazards of excess P from applying organic P-sources at N-based rates are not greater than observed at P-based rates of mineral fertilizer. Results suggest that management of the environmental P hazards associated with N-based rates of organic materials in Florida sands is possible by either applying P-sources with WTR or using a moderate water-soluble P-source.     

Sources and Transport of Phosphorus to Rivers in California and Adjacent States,U.S., as Determined by SPARROW Modeling

The SPARROW (SPAtially Referenced Regression on Watershed attributes) model was used to simulate annual phosphorus loads and concentrations in unmonitored stream reaches in California, U.S., and portions of Nevada and Oregon. The model was calibrated using de‐trended streamflow and phosphorus concentration data at 80 locations. The model explained 91% of the variability in loads and 51% of the variability in yields for a base year of 2002. Point sources, geological background, and cultivated land were significant sources. Variables used to explain delivery of phosphorus from land to water were precipitation and soil clay content. Aquatic loss of phosphorus was significant in streams of all sizes, with the greatest decay predicted in small‐ and intermediate‐sized streams. Geological sources, including volcanic rocks and shales, were the principal control on concentrations and loads in many regions. Some localized formations such as the Monterey shale of southern California are important sources of phosphorus and may contribute to elevated stream concentrations. Many of the larger point source facilities were located in downstream areas, near the ocean, and do not affect inland streams except for a few locations. Large areas of cultivated land result in phosphorus load increases, but do not necessarily increase the loads above those of geological background in some cases because of local hydrology, which limits the potential of phosphorus transport from land to streams.     

OXYGEN DEMAND IN ICE COVERED LAKES AS IT PERTAINS TO WINTER AERATION1

ABSTRACT: Winterkill, the death of fish under ice due to oxygen deficiency, threatens hundreds of shallow lakes in the upper Midwest of the United States every winter. For decades, attempts have been made to prevent winterkill, usually through aeration, with mixed results. In large part, the failure of strategies to prevent winterkill can be linked to a lack of understanding of winter limnology and in particular, of oxygen dynamics under ice. Most winterkill lakes behave as closed systems with regard to oxygen. Consequently, the oxygen content of an ice and snow covered lake is essentially a function of the amount of initial storage and the rate of depletion. Should the stored oxygen be insufficient to prevent near anoxia before melting of the ice cover occurs, winterkill will result. Most oxygen consumption in ice covered lakes is due to bacterial respiration and chemical oxidation at the sediment/water interface, the remainder occurring in the water column. Oxygen consumption (and thus depletion) is a function of the velocity and oxygen concentration of the near sediment water. This is due to the fact that oxygen transport to the sediment is mediated by a diffusive boundary layer adjacent to the sediment surface. Winter oxygen depletion rates decrease when the oxygen concentration of the overlying water falls below about 3 mg/l. Aeration techniques which increase the oxygen concentration and velocity of the near-sediment water also increase the oxygen consumption (depletion) rate.     

AQUATIC TRANSPORT OF HEAVY METALS IN THE URBAN ENVIRONMENT1

ABSTRACT: A study has been conducted for the past two years on a 4.6 mile stretch of the Saddle River near Lodi, New Jersey. The primary objectives of this study were two fold; initially, the amounts of various heavy metals being contributed to the Saddle River by stormwater runoff, rainfall, and individual tributaries, etc., were investigated to better delineate the distribution of various sources of heavy metals to the aquatic environment. Secondly, a series of benthal deposits from the Saddle River were analyzed to determine the fate of these metals once introduced into the receiving stream. A mass balance analysis of heavy metals in the Saddle River was performed to determine the amount of these materials contributed from unrecorded sources. The results of this study seemed to demonstrate the importance of considering the potential scouring of river sediments as a secondary source of metals in determinations of this type. The distribution of metals in precipitation samples collected in this study was found to be similar to that in runoff, with lead and zinc predominating. Relative concentrations of metals in precipitation as compared to those of stormwater were relatively insignificant. Metal concentrations of bottom sediments were found to vary considerably from sample to sample.     

Rehabilitation and Flood Management Planning in a Steep,Boulder-Bedded Stream

This study demonstrates the integration of rehabilitation and flood management planning in a steep, boulder-bedded stream in a coastal urban catchment on the South Island of New Zealand. The Water of Leith, the primary stream flowing through the city of Dunedin, is used as a case study. The catchment is steep, with a short time of concentration and rapid hydrologic response, and the lower stream reaches are highly channelized with floodplain encroachment, a high potential for debris flows, significant flood risks, and severely degraded aquatic habitat. Because the objectives for rehabilitation and flood management in urban catchments are often conflicting, a number of types of analyses at both the catchment and the reach scales and careful planning with stakeholder consultation were needed for successful rehabilitation efforts. This included modeling and analysis of catchment hydrology, fluvial geomorphologic assessment, analysis of water quality and aquatic ecology, hydraulic modeling and flood risk evaluation, detailed feasibility studies, and preliminary design to optimize multiple rehabilitation and flood management objectives. The study showed that all of these analyses were needed for integrated rehabilitation and flood management and that some incremental improvements in stream ecological health, aesthetics, and public recreational opportunities could be achieved in this challenging environment. These methods should be considered in a range of types of stream rehabilitation projects.