Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Spatial cost efficiency in waste paper handling: the case of corrugated board in Sweden

This paper analyzes the spatial cost efficiency of the Swedish legislation regarding waste disposal handling. We focus on the case of corrugated board and recognize that the different counties in Sweden possess different economic prerequisites in terms of waste paper recovery and utilization potential. We employ data for six corrugated board mills and 20 counties and a non-linear programming model to identify the least cost strategy for reaching the politically specified recycling target of a 65% recovery rate for corrugated board. That is, the total costs of recovering a minimum of 65% in each county are calculated and compared with the case when the country as a whole recovers 65% of all old corrugated board is collected but there exist no uniform target for each county. The conclusion is that from an efficiency point of view the recovery efforts should be concentrated to the highly populated and urbanized counties, and not be uniformly divided throughout the country. In the base case, the results suggest that the cost efficient county-specific recovery rates should range from 51 to 72%.     

An intergrated waste survey and environmental effects of COGIDO, a bleached pulp and paper mill in Vietnam, on the receiving waterbody

An integrated investigation on wastewater characterization and the environmental effects from the COGIDO pulp and paper mill in Bien Hoa Industrial Estate, Vietnam, a chlorine bleached soda integrated pulp and paper mill operating without a chemical recovery system, on the receiving water body was conducted during the rainy and dry seasons in 1993 and 1995. The pollution load from the mill was very high in terms of BOD, COD and SS (COD_m: 58.7 t/d; BOD: 33.3 t/d and SS: 25.1 t/d). The effluent toxicity was determined using four toxicity tests: the green micro-alga, Selenastrum capricornutum, Microtox (marine bacteria: Photobacterium phosphoreum), the duckweed, Lemna aequinoctialis, and fish (silver barb: Puntius gonionotus, and Tilapia: Tilapia nilotica). Selenastrum capricornutum was the most sensitive among the tested organisms. The mill toxicity emission rate (TER) was as high as 338 610 (Selenastrum test). The bleaching-pulp and semi-chemical pulp plants which contributed the largest pollution load to the total COGIDO effluent, therefore, were targeted for abatement measures. Physico-chemical parameters as well as qualitative and quantitative aquatic organism composition for the river water were established. The BOD₅ and COD values exceeded the potable surface water standard by a factor of 2 to 4. The species diversity and abundance of the phytoplankton, zooplankton and zoobenthos were found to be lower (20–40%) than that of unpolluted rivers in Vietnam, whereas pollution-indicator species increased up to four times during the dry season 1995.     

The influence of institutions and organizations on urban waste collection systems: an analysis of waste collection system in Accra, Ghana (1985-2000)

Urban waste collection system is a pivotal component of all waste management schemes around the world. Therefore, the efficient performance and the success of these schemes in urban pollution control rest on the ability of the collection systems to fully adapt to the prevailing cultural and social contexts within which they operate. Conceptually, institutions being the rules guiding the conduct of public service provision and routine social interactions, waste collection systems embedded in institutions can only realize their potentials if they fully evolve continuously to reflect evolving social and technical matrices underlying the cultures, organizations, institutions and social conditions they are designed to address. This paper is a product of an analysis of waste collection performance in Ghana under two different institutional and/or organizational regimes; from an initial entirely public sector dependence to a current mix of public-private sector participation drawing on actual planning data from 1985 to 2000. The analysis found that the overall performance of waste collection services in Ghana increased under the coupled system, with efficiency (in terms of total waste clearance and coverage of service provision) increasing rapidly with increased private-sector controls and levels of involvement, e.g. for solid waste, collection rate and disposal improved from 51% in 1998 to about 91% in the year 2000. However, such an increase in performance could not be sustained beyond 10 years of public-private partnerships. This analysis argues that the sustainability of improved waste collection efficiency is a function of the franchise and lease arrangements between private sector group on the one hand and public sector group (local authorities) on the other hand. The analysis therefore concludes that if such franchise and lease arrangements are not conceived out of an initial transparent process, such a provision could undermine the overall sustainability of private sector initiatives in collection services delivery in the long term, as in the case of the Accra example.     

An economic modelling approach to the design and delivery of sustainable waste minimisation clubs: Prospects in the new policy framework

Since the early 1990s, waste minimisation clubs have been important sources of information for industry in the UK on clean technology and sustainable waste management practice. Despite this contribution, concern has grown about the declining number of clubs, their performance and the likelihood that they will continue to play a key role in national policy.This paper examines the evidence available and provides estimates of how the numbers varied in England since the first clubs were formed. The results presented indicate that, after initial expansion, numbers went into decline. The paper then explores, using economic theory, why this pattern should have developed and suggests it to be a function of how clubs were designed and managed. The results of the analysis are used to propose alterations in how future clubs could be designed so that they continue to contribute effectively to the development of sustainable waste management in UK industry. These lessons are of value to policy in both the UK and other countries considering the development of this important tool of waste strategy. The paper concludes with a number of suggestions for future research.     

Experimental investigation of a 250-kW turbine organic Rankine cycle system for low-grade waste heat recovery

An organic Rankine cycle (ORC) is generally used for converting low-grade heat into electricity. In this study, an extensive literature survey was conducted to identify current research gaps on experimental ORC systems. Specifically, there is limited experimental data and limited details on thermal and expander efficiencies of ORC systems. In order to address these gaps, the objective of this study included developing a turbine ORC with a power output exceeding 50 kW and thermal efficiency exceeding 8% for a heat source temperature < 120°C. The experimental results indicated that the system achieved a net power output of 242.5 kW and a thermal efficiency of 8.3% (the highest value for a turbine ORC system for the heat source temperature below 120°C). Thus, the study addressed the gaps identified in the research area of ORCs.     

Measuring the impact of prefabrication on construction waste reduction: An empirical study in China

Prefabrication has been widely regarded as a sustainable construction method in terms of its impact on environmental protection. One important aspect of this perspective is the influence of prefabrication on construction waste reduction and the subsequent waste handling activities, including waste sorting, reuse, recycle, and disposal. Nevertheless, it would appear that existing research with regard to this topic has failed to take into account its innate dynamic character of the process of construction waste minimization; integrating all essential waste handling activities has never been achieved thus far. This paper proposes a dynamic model for quantitatively evaluating the possible impacts arising from the application of prefabrication technology on construction waste reduction and the subsequent waste handling activities. The resulting model was validated based on an actual building project in Shenzhen, China.The simulation results of the design scenarios indicate that the policy on providing subsidy for each square meter of the prefabrication adopted in the construction would have more significant effect on promoting the use of prefabrication and improving the performance of construction waste reduction compared to the increase of income tax benefits. The results also show that (1) interaction exists among different management measures, and (2) the combined effect of multiple policies is larger than the simple sum of their individual impacts, indicating the need for comprehensive consideration on the combined effect of these potential polices. This paper demonstrates the potential benefits of using a system dynamics approach in understanding the behavior of real-world processes. The developed model not only serves as a practical tool for assessing the impact of off-site prefabrication on construction waste reduction and the corresponding waste handling activities, but also help provide a valuable reference to policy makers through the comparison of simulation results generated under various scenarios such that the best policy mix can be identified prior to production.     

Effect of grinding and heating on Ni2+ uptake properties of waste paper sludge

Uptake properties of Ni2+ were examined for unmilled and milled paper sludge calcined at various temperatures to develop a new usage of waste paper sludge. Since paper sludge mainly consists of cellulose ([C6H(10)O5]n) fibers, calcite (CaCO3), kaolinite (Al2Si2O5(OH)4) and talc (Mg3Si(4)O(10)(OH)2), amorphous and crystalline CaO(MgO)-Al(2)O(3)-SiO(2) compounds are formed by calcining paper sludge. Wet and dry milling treatments were performed to accelerate solid-state reaction to form the above mentioned target compounds. The crystalline phases originally present decompose at increasing calcining temperature (up to 800 degrees C) in the order cellulose 相似文献   

Integrating Local and Scientific Knowledge: An Example in Fisheries Science

Attempting to predict the spatial dynamics fish stocks, as required for management, is an ominous task given our incomplete understanding of biological and ecological mechanisms underpinning behavioral responses of fish. Large gaps still exist in our basic scientific knowledge. Nonetheless, the knowledge of fishers and fishery managers is not incorporated into our scientific analyses, even though such information is rich in observation since knowledge of fish behavior and distribution is a prerequisite for their profession. Combining such observations with more conventional scientific studies and theoretical interpretations provides a means by which we may bridge some gaps in our knowledge. Presented here is an example of how both local and scientific knowledge can be integrated in a heuristic model. The model, CLUPEX, is developed in the framework of a fuzzy logic expert system and uses linguistic statements written in natural language to capture and combine knowledge sources in the form of IF … THEN rules. The rules are inferred from interviews with experts and fishery professionals including fishers, fishery managers, scientists, and First Nations people. The knowledge base, comprised of the set of rules, is flexible in the sense that it can easily be modified to add additional information or change current information. Using input pertaining to biotic and abiotic environmental conditions, CLUPEX uses the rules to provide quantitative and qualitative predictions on the structure, dynamics and mesoscale distribution of shoals of migratory adult herring during different life stages of their annual life cycle.     

Phosphorus recovery and recycling from waste: An appraisal based on a French case study

Phosphate rocks, used for phosphorus (P) fertilizer production, are a non-renewable resource at the human time scale. Their depletion at the global scale may threaten global food and feed security. To prevent this depletion, improved P resource recycling from food chain waste to agricultural soils and to the food and feed industry is often presented as a serious option. However, waste streams are often complex and their recycling efficiency is poorly characterized. The aim of this paper is to estimate the P recovery and recycling potential from waste, considering France as a case study. We assessed the P flows in food processing waste, household wastewater and municipal waste at the country scale using a substance flow analysis for the year 2006. We also quantified the P recycling efficiency as the fraction of P in waste that ultimately reached agricultural soils or was recycled in the food and feed industry. Efforts were made to limit data uncertainty by cross-checking multiple data sources concerning P content in waste materials. Results showed that, in general, P recovery in waste was high but that the overall P recycling efficiency was only 51% at the country scale. In particular, P recycling efficiency was 75% for industrial waste, 43% for household wastewater and 47% for municipal waste. The remaining P was discharged into water bodies or landfilled, causing P-induced environmental problems as well as losses of nutrient resources. Major P losses were through food waste (which amounted to 39% of P in available food) and treated wastewater, and the findings were confirmed through cross-checking with alternative data sources. Options for improving P resource recycling and, thereby, reducing P fertilizer use were quantified but appeared to be less promising than scenarios based on reduced food waste or redesigned agricultural systems.     

Environmental,economic and social costs and benefits of a packaging waste management system: A Portuguese case study

The impact of the management of packaging waste on the environment, economic growth and job creation is analyzed in this paper. This integrated assessment intends to cover a gap in the literature for this type of studies, using the specific case study of the Portuguese packaging waste management system (SIGRE).The net environmental benefits associated with the management of packaging waste, are calculated using the Life Cycle Assessment methodology. The results show that, for the categories studied, the impacts associated to SIGRE's various activities are surpassed by the benefits associated to material and energy recovery, with special focus on recycling. For example, in 2011 SIGRE avoided the emission of 116 kt CO₂ equiv. – the equivalent carbon emission of the electricity consumption of 124.000 households in Portugal.The economic impact of SIGRE is evaluated through Input–Output Analysis. It was found that SIGRE's activities also have a significant economic impact. For example, their added value are ranked amongst the upper third of the economic activities with highest multiplier effect at national level: this means that for each Euro of value added generated within SIGRE, 1.25 additional € are added to the rest of the economy (multiplier effect of 2.25).Regarding the social impacts of SIGRE, the number of direct jobs associated with the system is estimated to be more than two thousand and three hundred workers. Out of these, 83% are connected to the management of municipal waste packaging (selective collection and sorting), 15% are connected to the management of non-municipal packaging waste and only 2% are connected to the Sociedade Ponto Verde (SPV, green dot society in English) – the management entity responsible for SIGRE.In general terms, the results obtained provide quantitative support to the EEA (2011) suggestion that moving up the waste hierarchy – from landfilling to recycling – creates jobs and boosts the economy.