Leaching of bisphenol A (BPA) from polycarbonate plastic to water containing amino acids and its degradation by radical oxygen species

In this study, (1) the change in the concentration of bisphenol A (BPA) leached from polycarbonate plastic (PCP) tube to water samples containing phosphate, sodium barbital, glycine, methionine or albumin at 37 degrees C as a function of time, and (2) the degradation rate of BPA leached from PCP tube to amino acid solutions in the presence of radical oxygen species (ROS) were investigated. The BPA leaching velocity (BPA-LV) from PCP tube to 50 mM glycine at pH 6 or 7 was twice that to control water, and the leaching was enhanced above pH 8. At pH 11, BPA-LV was significantly higher in 50 mM glycine and methionine solutions than in 50 mM NaOH. These results indicate that basic pH and amino acids contained in water could accelerate BPA leaching. The BPA-LV in phosphate buffer was different from the BPA-LVs in other buffers (barbital and glycine) at the same pH. BPA leached to the glycine or methionine solutions at pH 11 was degraded time dependently in a similar manner as the control water in the presence of ROS. The degradation of leached BPA was inhibited in the glycine solution, but was accelerated in the methionine solution. However, degradation of BPA added to freshly prepared methionine was inhibited in a similar manner to BPA in glycine. BPA degradation could be influenced by some kinds of amino acids, but glycine and methionine might be involved in BPA degradation in different ways.     

Leaching of bisphenol A (BPA) to seawater from polycarbonate plastic and its degradation by reactive oxygen species

In this study, (1) change in the concentration of bisphenol A (BPA) leached from polycarbonate (PC) tube to control water (BPA free), seawater and river water at 20 and 37 degrees C as a function of time, (2) the fate of BPA caused by addition of H(2)O(2) and Fe(3+) to seawater containing BPA leached from PC tube were assessed. BPA leached from PC tube to all water samples increased with the ascendant of temperature and with the passage of time. The BPA leaching velocity in seawater was the fastest in three samples (11 ng/day for seawater, 4.8 ng/day for river water 0.8 ng/day for control water at 37 degrees C).BPA leaching velocity from PC tube was significantly high at pH 8 (50 mM Na(2)HPO(4)) and increased dose-dependently. There was no difference in the velocity of BPA among the 50 mM phosphate-buffers at pH 6.5, 7.0 and 7.5. BPA was leached three times higher by addition of Na(+) than K(+). However, the higher the K(+) concentration, the larger the BPA leached from PC tube. Na(+) mixed with PO(4)(-) was effective on BPA leaching from PC tube, but not with SO(4)(-) or Cl(-). The results suggested that BPA leaching from PC tube would be attributed to the concentration of bibasic phosphate such as Na(2)HPO(4) and K(2)HPO(4) in water samples. BPA was degraded in both control water and seawater in the presence of radical oxygen species, but the degradation rate was lower in seawater than in control water, suggesting that anti-oxidative system exists in seawater. Neo-synthesized substance in both control water and seawater in the presence of reactive oxygen species was identified as BPA-quinone by LC-MS.     

Inhibition of BPA degradation by serum as a hydroxyl radical scavenger and an Fe trapping agent in Fenton process

Identification of reactive oxygen species (ROS) that contribute to bisphenol-A (BPA) degradation and monitoring of BPA at various concentrations in human serum under Fenton reaction conditions were carried out using electron spin resonance (ESR) spectrophotometry and high performance liquid chromatography with electrochemical detection (HPLC-ECD). BPA recovery decreased with increasing Fe concentration and time, both with a Fenton reaction using Fe(II), and with a Fenton-like reaction using Fe(III). In these reactions, BPA dose-dependently decreased the intensity of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO)-*OH, up to 1 microg/ml BPA, and no change in DMPO-O(2)(?-) intensity was observed. The decrease in BPA recovery was inhibited strongly by addition of serum under Fenton-like reaction conditions, and there was a negative correlation between turbidity and BPA recovery. To clarify the mechanism by which serum inhibits BPA degradation, the relationship between BPA recovery and sample turbidity, and characteristics of the precipitates were investigated using spectrophotometry and X-ray analysis. The precipitate formed in the serum-containing sample consisted of C, S, O, P and Fe. BPA degradation was also inhibited under Fenton-like reaction conditions in phosphate buffered saline (PBS), and a precipitate consisting of O, P, and Fe appeared. Precipitates also appeared in authentic albumin and gamma-globulin when sulfate was added with Fenton reagents. After precipitate removal, both Fe and protein concentrations in the supernatant of the protein solutions with sulfate decreased with increasing Fe addition. We demonstrate here that hydroxyl radical generation from Fenton or Fenton-like reactions can degrade BPA, and that serum strongly inhibits BPA degradation, not only by competing with BPA for hydroxyl radicals, but also by trapping Fe with oxidative components present in the serum.     

Photosensitized degradation of bisphenol A involving reactive oxygen species in the presence of humic substances

The photodegradation of endocrine disrupter bisphenol A (BPA) in the presence of natural humic substances (HS) under simulated solar irradiation was studied. BPA underwent slow direct photolysis in neutral pure water, but rapid photosensitized degradation in four kinds of HS, following pseudo-first-order reaction. Reactive oxygen species (ROS) formed from HS were determined, including OH, (1)O(2) and H(2)O(2). The enhancement of BPA degradation by adding Fe(III) was primarily attributed to the oxidation of OH produced from photo-Fenton-like reaction. And the joint effects of HS and nitrate ions coexisting on BPA degradation appeared to depend on respective concentration levels. The effects of dissolved oxygen suggested that the energy transfer between excited state of SRFA and NOFA likely occurred, while the abstraction of phenolic hydrogen atom to reactive triplet state of NOHA possibly took place. Based on the structural analyses of main intermediates and degradation products of BPA detected by GC-MS, the possible photodegradation pathways were proposed, involving the alky cleavage, alkyl oxidation and OH addition. This study gave a better understanding for the photochemical transformation of BPA induced by ROS generated from natural water composition under sunlight irradiation.     

Anaerobic biodegradation of methyl tert-butyl ether under iron-reducing conditions in batch and continuous-flow cultures.

The feasibility of biodegradation of the fuel oxygenate methyl tert-butyl ether (MTBE) under iron-reducing conditions was explored in batch and continuous-flow systems. A porous pot completely-mixed reactor was seeded with diverse cultures and operated under iron-reducing conditions. For batch studies, culture from the reactor was transferred anaerobically to serum bottles containing either MTBE alone or MTBE with ethanol (EtOH) and excess electron acceptor. In the continuous-flow reactor, MTBE conversion to tert-butyl alcohol (TBA) was observed after 181 days of operation, and stable removal was achieved throughout the remainder of the study. Simultaneously, both the MTBE only and the MTBE and EtOH iron-reducing batch serum bottles also began to degrade MTBE. Bottles were respiked and the degradation rate was determined to be 2.36 +/- 0.10 x 10(-4) mmol MTBE/min-kgVSS. The EtOH present with MTBE degraded faster (7.76 +/- 0.08 x 10(-3) mmol EtOH/min-kg VSS) but did not have a noticeable effect on the rate of MTBE degradation. No evidence of TBA degradation was observed by the iron-reducing cultures. Stoichiometry of iron utilization was determined from the iron balance of the continuous-flow reactor, and it was found that the bulk of the electron acceptor was required for energy and maintenance with little remaining for cell synthesis. This is consistent with a yield coefficient of less than 0.1. Molecular analysis of the iron-reducing culture by denaturing gradient gel electrophoresis indicated that uncultured strains of delta-Proteobacteria were dominant in the reactor.     

超声波／零价铁降解水中双酚A

研究了超声波／零价铁（US／Fe^0）工艺对水中双酚A（BPA）的降解效果及影响因素。结果表明,US／Fe^0工艺可以有效降解水中的BPA,具有协同作用,且降解过程符合一级动力学规律;Fe^0具有促进和抑制的双重作用;超声功率越大,越有利于BPA的降解;初始浓度较低时,BPA的降解效果较好;弱酸性条件有利于BPA的降解;加入一定量的自由基捕获剂（正丁醇）可以抑制BPA的降解;联合作用2h后,TOC的去除率较低,说明其矿化程度不完全。     

Cosolvent effects of alcohols on the Henry's law constant and aqueous solubility of tetrachloroethylene (PCE)

The effects of selected cosolvents ethyl alcohol (EtOH), isopropyl alcohol (IPA), and tertbutyl alcohol (TBA) on the Henry's law constant (H) of tetrachloroethylene (PCE) in aqueous solutions were investigated using the static headspace method. Alcohols in solution at a concentration around 20% and above acted as cosolvents increasing the aqueous solubility of PCE, which resulted in lower H values for PCE as compared to the value of H in deionized water. TBA, the most hydrophobic of the three alcohols, exhibited the strongest cosolvent effects, while EtOH had the weakest effects. A ln-linear relationship was observed between H and the volumetric fraction of alcohol added. Investigation of the solubilization of PCE in alcohol solutions confirmed the cosolvent trend observed for the three alcohols. A ln-ln relationship was observed between H and the enhanced solubility of PCE at a particular alcohol concentration. It was also observed that the value of H is a function of the enhanced solubility regardless of the type of cosolvent used. The results from this research further define the behavior of PCE in alcohol flooding solutions used in the remediation of PCE contaminated media.     

太阳能固定膜光催化去除双酚A的特性与效果

以太阳能固定膜光催化中试装置,研究了光解、初始浓度和平均光强等对双酚A(BPA)光催化去除的影响及BPA的矿化和在自来水中的处理效果.试验结果表明,BPA在日光照射下很难光解,其光催化降解呈表观一级反应,在平均光强介于5.7～23.5 W/m2时,表观反应速率常数和平均光强呈线性关系.太阳能光催化对BPA具有良好的矿化作用,但其降解与以UV254为光源的降解有不同的机理.太阳能光催化对自来水中BPA也具有较好的处理效果.     

Bisphenol A migration from plastic materials: direct insight of ecotoxicity in Daphnia magna

Bisphenol A (BPA) is an endocrine disrupting chemical (EDC) whose migration from food packaging is recognized worldwide. However, the real overall food contamination and related consequences are yet largely unknown. Among humans, children’s exposure to BPA has been emphasized because of the immaturity of their biological systems. The main aim of this study was to assess the reproductive impact of BPA leached from commercially available plastic containers used or related to child nutrition, performing ecotoxicological tests using the biomonitoring species Daphnia magna. Acute and chronic tests, as well as single and multigenerational tests were done. Migration of BPA from several baby bottles and other plastic containers evaluated by GC-MS indicated that a broader range of foodstuff may be contaminated when packed in plastics. Ecotoxicological test results performed using defined concentrations of BPA were in agreement with literature, although a precocious maturity of daphnids was detected at 3.0 mg/L. Curiously, an increased reproductive output (neonates per female) was observed when daphnids were bred in the polycarbonate (PC) containers (145.1?±?4.3 % to 264.7?±?3.8 %), both in single as in multigenerational tests, in comparison with the negative control group (100.3?±?1.6 %). A strong correlated dose-dependent ecotoxicological effect was observed, providing evidence that BPA leached from plastic food packaging materials act as functional estrogen in vivo at very low concentrations. In contrast, neonate production by daphnids cultured in polypropylene and non-PC bottles was slightly but not significantly enhanced (92.5?±?2.0 % to 118.8?±?1.8 %). Multigenerational tests also revealed magnification of the adverse effects, not only on fecundity but also on mortality, which represents a worrying trend for organisms that are chronically exposed to xenoestrogens for many generations. Two plausible explanations for the observed results could be given: a non-monotonic dose–response relationship or a mixture toxicity effect.     

Degradation of bisphenol A in natural waters

In establishing chemical environmental safety a hazard assessment using environmental exposure and effects information is required. Environmental degradation information is factored into estimates of exposure. The environmental degradation of polycarbonate grade Bisphenol A 2,2′-Bis (p-hydroxyphenyl propane) CAS#80-05-7, used in the manufacture of plastics, was measured using local waters in the Houston Ship Channel. A spike of 3 mg/l BPA was added to four laboratory units containing fresh water (control), Houston Ship Channel water, Patricks Bayou water (200 yards downstream from a BPA chemical plant discharge), and the chemical plant treated process effluent. Greater than 90% degradation was observed in all treatments except the control within four days. The initiation of biodegradation in the units was in the following order: effluent> Patricks Bayou> Houston Ship Channel.     

气相沿面放电—活性炭纤维吸附联合降解双酚A废水研究

利用气相沿面放电—活性炭纤维(ACF)吸附(简称放电—吸附)联合处理含双酚A(BPA)废水,探讨了联合处理对BPA的降解效果,并通过处理过程中O3利用率变化以及处理前后ACF的表观状态变化分析了反应的作用机制。结果表明,放电—吸附联合处理相比单独放电和单独ACF吸附能显著提高BPA的降解率;在一定范围内,加大放电电压能提高放电—吸附联合处理的BPA降解效果,但放电电压超过一定值后,放电产生的O3量进一步增多,对ACF表面的结构破坏作用增加,反而导致BPA的降解效果降低,本研究较佳的放电电压为8.5kV;扫描电镜分析结果表明,经放电—吸附联合处理后,ACF表面出现大量的孔道,提高了表面的BPA富集浓度,同时也增加反应的活性位点;傅里叶变换红外光谱分析结果表明,联合处理后ACF表面的C—O、C=C、O—H等官能团都有所减少,可能是联合处理过程中O3等活性物质与ACF表面的这些还原性官能团发生了反应,诱导O3分解出了更多的自由基,从而促进了BPA的降解。     

Photodegradation of bisphenol A in simulated lake water containing algae, humic acid and ferric ions

The photodegradation of bisphenol A (BPA), a suspected endocrine disruptor (ED), in simulated lake water containing algae, humic acid and Fe3+ ions was investigated. Algae, humic acid and Fe3+ ions enhanced the photodegradation of BPA. Photodegradation efficiency of BPA was 36% after 4h irradiation in the presence of 6.5 x 10(9) cells L(-1) raw Chlorella vulgaris, 4 mg L(-1) humic acid and 20 micromol L(-1) Fe3+. The photodegradation efficiency of BPA was higher in the presence of algae treated with ultrasonic than that without ultrasonic. The photodegradation efficiency of BPA in the water only containing algae treated with ultrasonic was 37% after 4h irradiation. The algae treated with heating can also enhance the photodegradation of BPA. This work helps environmental scientists to understand the photochemical behavior of BPA in lake water.     

Biological assessment of bisphenol A degradation in water following direct photolysis and UV advanced oxidation

Endocrine disrupting compounds (EDCs) are exogenous environmental chemicals that can interfere with normal hormone function and present a potential threat to both environmental and human health. The fate, distribution and degradation of EDCs is a subject of considerable investigation. To date, several studies have demonstrated that conventional water treatment processes are ineffective for removal of most EDCs and in some instances produce multiple unknown transformation products. In this study we have investigated the use of direct photolysis with low-pressure (LP) Hg UV lamps and UV+hydrogen peroxide (H(2)O(2)) advanced oxidation process (AOP) for the degradation of a prototypic endocrine disrupter, bisphenol A (BPA), in laboratory water. Removal rates of BPA and formation of degradation products were determined by high performance liquid chromatography (HPLC) analysis. Changes in estrogenic activity were evaluated using both in vitro yeast estrogen screen (YES) and in vivo vitellogenin (VTG) assays with Japanese medaka fish (Oryzias latipes). Our results demonstrate that UV alone did not effectively degrade BPA. However, UV in combination with H(2)O(2) significantly removed BPA parent compound and aqueous estrogenic activity in vitro and in vivo. Removal rates of in vivo estrogenic activity were significantly lower than those observed in vitro, demonstrating differential sensitivities of these bioassays and that certain UV/AOP metabolites may retain estrogenic activity. Furthermore, the UV/H(2)O(2) AOP was effective for reducing larval lethality in treated BPA solutions, suggesting BPA degradation occurred and that the degradation process did not result in the production of acutely toxic intermediates.     

The impacts of bisphenol A (BPA) on abalone (Haliotis diversicolor supertexta) embryonic development

The effects of bisphenol A (BPA) on abalone (Haliotis diversicolor supertexta) embryonic development were investigated by exposing the fertilized eggs to four different concentrations of BPA (0.05, 0.2, 2 and 10 μg mL⁻¹). Toxicity endpoints including the embryo development parameters, the physiological features and the expression profile of several reference genes (prohormone convertase 1, PC1; cyclin B, CB; and cyclin-dependent kinase 1, CDK1) were assessed. The results showed that BPA could markedly reduce embryo hatchability, increase developmental malformation, and suppress the metamorphosis behavior of larvae. The possible toxicological mechanisms hidden behind of these effects (i.e. disturbing the embryogenesis) might result from three aspects: (1) BPA disturbance the cellular ionic homeostasis and osmoregulation of abalone embryos by changing the Na⁺-K⁺-ATPase and Ca²⁺-Mg²⁺-ATPase levels; (2) BPA induced oxidative damage of embryos by significantly alterating the peroxidase (POD) activities and the malondialdehyde (MDA) production; and (3) the RT-PCR analysis further demonstrated that BPA perturbed the cellular endocrine regulation and cell cycle progression by down-regulating the PC1 gene, as well as over-expressing the CB and CDK1 genes. This is the first comprehensive study on the developmental toxicity of BPA to the marine abalone at morphological, physiological and molecular levels. The results in this study also indicated that the embryo tests can contribute to the ecological risk assessment of the endocrine disruptors in marine environment.     

Effects of bacterial counts and temperature on the biodegradation of bisphenol A in river water

Total 15 surface river waters were collected from thirteen different rivers to investigate a relationship of bacterial counts and temperature to the degradation of bisphenol A (BPA). Autoclaved and non-autoclaved river water samples were spiked with 0.2 mg/l BPA. The spiked samples were placed at temperatures of 4, 20, and 30 degrees C and analyzed by high performance liquid chromatography. BPA was degraded at all temperatures in the non-autoclaved samples. However, BPA in the autoclaved samples was not changed at all temperatures for 20 d. These results show that the primary factor of BPA degradation in river water is bacteria. Moreover, three groups [group A (> 10000 CFU/ml), group B (2000-10000 CFU/ml), and group C (< 2000 CFU/ml)], were made on the basis of bacterial counts of the samples. Half-lives for BPA degradation in groups A, B, and C were 2, 3, and 6 d at 30 degrees C and were 4, 5, and 7 d at 20 degrees C, respectively. But at 4 degrees C, the loss of BPA was about 40%, 20%, and 10% in groups A, B, and C for 20 d, respectively. Bacterial counts exerted an influence on BPA degradation in river water with temperature. Our results also show that BPA-degrading bacteria are widely distributed in river waters.     

Determination of naturally occurring MTBE biodegradation by analysing metabolites and biodegradation by-products

Methyl tert-butyl ether (MTBE) is one of the main additives in gasoline. Its degradation is known to be difficult in natural environments. In this study, significant MTBE degradation is demonstrated at a contaminated site in Leuna (eastern Germany). Since the extent of the plume appeared to be constant over the last 5 years, an extended study was performed to elucidate the degradation processes. Special attention was paid to the production, accumulation and degradation of metabolites and by-products. Groundwater samples from 105 monitoring wells were used to measure 20 different substances. During the degradation process, several intermediates such as tert-butyl alcohol (TBA), tert-butyl formate, formate and lactate were produced. However, the potentially carcinogenic by-product methacrylate was not detected in several hundred samples. At the Leuna site, MTBE degradation occurred under microaerobic conditions. In contrast to hydrocarbons and BTEX, there was no evidence for anaerobic MTBE degradation. Among the degradation products, TBA was found to be a useful intermediate to identify MTBE degradation, at least under microaerobic conditions. TBA accumulation was strongly correlated to MTBE degradation according to the kinetic properties of both degradation processes. Since maximum degradation rates (v(max)) and k(m) values were higher for MTBE (v(max)=2.3 mg/l/d and k(m)=3.2 mg/l) than for TBA (v(max)=1.35 mg/l/d and k(m)=0.05 mg/l), TBA significantly accumulated as an intermediate by-product. The field results were supported by bench scale model aquifer experiments.     

Heterogeneous Fenton degradation of bisphenol A catalyzed by efficient adsorptive Fe3O4/GO nanocomposites

A new method for the degradation of bisphenol A (BPA) in aqueous solution was developed. The oxidative degradation characteristics of BPA in a heterogeneous Fenton reaction catalyzed by Fe₃O₄/graphite oxide (GO) were studied. Transmission electron microscopic images showed that the Fe₃O₄ nanoparticles were evenly distributed and were ～6 nm in diameter. Experimental results suggested that BPA conversion was affected by several factors, such as the loading amount of Fe₃O₄/GO, pH, and initial H₂O₂ concentration. In the system with 1.0 g L^?1 of Fe₃O₄/GO and 20 mmol L^?1 of H₂O₂, almost 90 % of BPA (20 mg L^?1) was degraded within 6 h at pH 6.0. Based on the degradation products identified by GC–MS, the degradation pathways of BPA were proposed. In addition, the reused catalyst Fe₃O₄/GO still retained its catalytic activity after three cycles, indicating that Fe₃O₄/GO had good stability and reusability. These results demonstrated that the heterogeneous Fenton reaction catalyzed by Fe₃O₄/GO is a promising advanced oxidation technology for the treatment of wastewater containing BPA.     

Characterization of complex lipid mixtures in contaminant exposed JEG-3 cells using liquid chromatography and high-resolution mass spectrometry

The aim of this study was to develop a method based on ultra high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS) for lipid profiling in human placental choriocarcinoma (JEG-3) cells. Lipids were solid–liquid extracted from JEG-3 cells using a solution of chloroform/methanol (2:1, v/v) in a simple procedure requiring minimal sample alteration. Simultaneous separation of complex lipid mixtures in their major classes was achieved with a reversed-phase (C₈) UHPLC column and a mobile phase containing methanol with 1 mM ammonium formate and 0.2 % formic acid (A)/water with 2 mM ammonium formate and 0.2 % formic acid (B). Lipids were characterized using time-of-flight (TOF) and Orbitrap under full scan and positive electrospray ionization mode with both analyzers. A total of 178 species of lipids, including 37 phosphatidylcholines (PC), 32 plasmalogen PC, 9 lyso PC, 4 lyso plasmalogen PC, 30 triacylglycerols, 22 diacylglycerols, 7 cholesterol esters, 25 phosphatidylethanolamines, and 12 sphingomyelins, were identified using TOF and Orbitrap. The identification of all lipid classes was based on exact mass characterization with an error < 5 ppm. The developed methodology was applied to study lipid alterations in human placental cells against the exposure to perfluorinated chemicals (PFCs) and tributyltin (TBT).     

Canine toys and training devices as sources of exposure to phthalates and bisphenol A: Quantitation of chemicals in leachate and in vitro screening for endocrine activity

Chewing and mouthing behaviors exhibited by pet dogs are likely to lead to oral exposures to a variety of environmental chemicals. Products intended for chewing and mouthing uses include toys and training devices that are often made of plastics. The goal of the current study was to determine if a subset of phthalates and bisphenol A (BPA), endocrine disrupting chemicals commonly found in plastics, leach out of dog toys and training devices (bumpers) into synthetic canine saliva. In vitro assays were used to screen leachates for endocrine activity. Bumper leachates were dominated by di-2-ethylhexyl phthalate (DEHP) and BPA, with concentrations reaching low μg mL⁻¹ following short immersions in synthetic saliva. Simulated chewing of bumpers during immersion in synthetic saliva increased concentrations of phthalates and BPA as compared to new bumpers, while outdoor storage had variable effects on concentrations (increased DEHP; decreased BPA). Toys leached substantially lower concentrations of phthalates and BPA, with the exception of one toy which leached considerable amounts of diethyl phthalate. In vitro assays indicated anti-androgenic activity of bumper leachates, and estrogenic activity of both bumper and toy leachates. These results confirm that toys and training devices are potential sources of exposure to endocrine disrupting chemicals in pet dogs.     

Fate of 14C-bisphenol A in soils

Bisphenol A (BPA; 2,2-(4,4(')-dihydroxydiphenyl)propane) is predominantly used as an intermediate in the production of polycarbonate plastics and epoxy resins. Traces of BPA released into the environment can reach the soil via application of sewage sludge from wastewater treatment systems that receive wastewaters containing BPA, or from leachate from uncontrolled landfills. The biodegradability of BPA has been previously investigated in several studies designed to simulate surface waters and biological wastewater treatment systems. However, there is little information available about the fate of BPA in soil. Therefore, laboratory soil degradation and batch adsorption studies were conducted with 14C-BPA and four soils according to international guidelines. The soils represented a broad range of physico-chemical properties. An important result of the degradation study was that, independent of the soil type, 14C-BPA was rapidly dissipated and not detectable in soil extracts following 3 days of incubation. Based on this result, a dissipation half-life of less than 3 days was estimated. The major route of dissipation of 14C-BPA in soil was the formation of bound residues that could not be recovered by exhaustive Soxhlet extraction. 14C-BPA was also shown to be transiently converted to up to five metabolites, but within 3 days, neither 14C-BPA nor 14C-metabolites were detectable in the soils. After 120 days incubation, significant amounts (up to 20% of the radioactivity applied) of the parent compound were recovered as 14CO(2). Soil adsorption experiments indicated that the distribution coefficients (K(oc)) were between 636 and 931, classifying BPA as having low mobility for all tested soils. From the results of this study, it was concluded that if BPA reaches the soil compartment, it is not expected to be stable, mobile, or bioavailable.