Vermicomposting: A sustainable tool for environmental equilibria

Improperly managed organic waste constitutes a serious environment threat across the globe. This has led to a worldwide struggle to strike a balance between the rapid generation of such wastes and protection of the environment. With the unique advantages of lower operational and maintenance costs compared with other waste management technologies, the use of vermicomposting to manage organic wastes has been increasing rapidly in recent years. Still, some factors (e.g., characteristics of substrate composition before and after treatment) are in need of additional, specific studies so that researchers can better understand the metabolism involved in the process. Vermicomposting provides employment opportunities as it protects the environment, augmenting crop productivity when it is used as a fertilizer supplement and helping to maintain ecological balance. Thus, vermicompost plays an important role in the circular economy. This article provides an overview of the research activities that have been conducted on the use of vermicomposts to remove pollutants from the soil, in wastewater treatment, and in organic waste recycling throughout the world. Circular economic assessment has revealed that vermicomposting technology is usually feasible except in certain cases. Most other methods of waste disposal lead to soil deterioration, toxic effects, and increased pollution affecting land, air, water, and living beings, in addition to the sometimes considerable expense of their implementation. Thus, an eco‐friendly method that removes waste in one step is needed. Determining the long‐term performance and sustainable operation of vermicomposting systems still poses a challenge, however, as treatment performance is affected by design parameters, operational conditions, and environmental factors. This article summarizes the factors influencing pollutant removal through the vermicomposting process. Finally, this article highlights additional research that should be conducted on these issues to improve the performance of vermicomposting.     

Kodak's safety performance indexing—a tool for environmental improvement

Safety performance has a direct effect on employees' productivity and quality of work life, and on company profits and image in the community. Enormous human and financial losses can result from poor safety performance, and all such losses are preventable. To prevent these potential losses, safety performance must be continually improved across all levels of the organization. Effective safety programs are the key to improved safety performance. But how do we know when a safety program is effective? How can we measure safety performance and set goals for improvements? How can we track progress toward these goals? This article demonstrates how a powerful performance management tool —performance indexing— can be used to help improve safety performance throughout your company. This tool can also be used to measure, track, and improve environmental and occupational health performance.     

Agricultural nitrogen model: A tool for regional environmental management

A detailed nitrogen budget was devised for agricultural activities in the Florida peninsula, based on routine data published by state agricultural agencies. The model demonstrates that important unmonitored fluxes of nitrogen can often be calculated by mass balance on individual model compartments, and that the reasonability of poorly quantified fluxes can be assessed. The results of such models can be very useful in designing and assessing the results of field experiments and in prioritizing environmental monitoring programs.     

LCA: A decision support tool for environmental assessment of MSW management systems

Life cycle assessment (LCA) can be successfully applied to municipal solid waste (MSW) management systems to identify the overall environmental burdens and to assess the potential environmental impacts. In this study, two methods used for current MSW management in Phuket, a province of Thailand, landfilling (without energy recovery) and incineration (with energy recovery), are compared from both energy consumption and greenhouse gas emission points of view. The comparisons are based on a direct activity consideration and also a life cycle perspective. In both cases as well as for both parameters considered, incineration was found to be superior to landfilling. However, the performance of incineration was much better when a life cycle perspective was used. Also, landfilling reversed to be superior to incineration when methane recovery and electricity production were introduced. This study reveals that a complete picture of the environmental performance of MSW management systems is provided by using a life cycle perspective.     

A process for quantifiable evaluation of environment improvement

Summary The assessment of adverse effects of development projects is well established, as, for example, in the case of quarrying or a new urban road scheme. Environmental Improvement, on the other hand, is generally seen as a by-product of economic or development schemes. In the UK it is recognised as an important factor in attracting private sector investment, yet in project evaluation environmental improvements are often described in general terms but not quantified.Survey methods for establishing people's preferences are well established. Enhancement of the environment can be measured as a ratio by assessing the environment before and after improvement. This method has been applied in an evaluation of four case studies assessing the impact of Urban Development Grants in South Wales (Alden et al., 1987).Dr S M Romaya is an architect who possesses a planning qualification. His environmental interests relate particularly to urban centres and these form the focus of his research and many publications. In addition to conducting an architectural practice and being involved in consultancy, much of his working life has been spent in academic institutions; as an Associate Professor at the College of Engineering Technology, Baghdad; at Nottingham University; and now as a lecturer in Urban Design in the Department of Town Planning, UWIST, Cardiff. This paper was initially delivered at an Environmental Impact Assessment Conference conducted by the Institution of Environmental Sciences during October 1986.     

Monitoring and environmental modeling of earthwork impacts: A road construction case study

This study presents the contributions of materials, earth engineering machines and construction techniques to potential environmental impacts from the main items of typical road earthworks. To achieve this goal, the overall activity at a 1.9-km long French earthworks project site for a heavily trafficked highway was surveyed during its 2007–2009 construction period. Using data collected and a numerical model of road life cycle assessment (LCA), i.e. ECORCE, six indicators could be evaluated, namely: energy consumption, global warming potential, acidification, eutrophication, photochemical ozone creation, and human chronic toxicity. When available, several life cycle inventories were implemented in order to appraise indicator sensitivity with respect to the considered panel of pollutants. Results also allowed estimating from an LCA point of view: (i) the conservation of both aggregates and soil as induced by quicklime treatment and (ii) the duration necessary for projected traffic levels to offset the potential environmental impacts of the earthworks stage.     

Mainstreaming environmental impact assessment as a tool for environmental management in Ethiopia: Current challenges and directions for future improvements

The Environmental Impact Assessment (EIA) was first entered into force in the United States of America in 1969 through the National Environmental Policy Act. Since then, the EIA was implemented in many other countries. In Ethiopia, EIA was formally introduced in 2002 by Proclamation No. 299/2002 after the establishment of the Environmental Protection Authority (EPA) in 1995 and the formulation of the Environmental Policy of Ethiopia (EPE) in 1997. This study, which is based on a document review, interviews, and the application of a survey questionnaire, analyzes the procedures and practices of the Ethiopian EIA system, seeks to clarify fundamental information regarding the EIA system and characteristics of the key elements of EIA processes, and finally, offers suggestions that could improve EIA practices in the country. The overall result of this study shows that Ethiopia adopted EIA procedures that are similar to western models; however, despite approximately 15 years of experience, its implementation is still poor to the point that the use of EIA as an instrument of environmental management could be questioned. The challenges identified by this study include institutional, organizational, and professional capacity gaps, which, in turn, have resulted in constraints ranging from improper screening, scoping, and production of EIA reports to ineffective review, monitoring, and post‐project evaluation. Additional challenges to the system include poor governance and corruption, rapid economic growth, and the mushrooming of micro‐ and small‐scale enterprises that cause pollution and environmental degradation. This article also provides comprehensive suggestions to improve EIA practices in Ethiopia.     

Multiple-resource modeling as a tool for conservation: Its applicability in Mexico

The current Mexican environmental law provides the legal basis for comprehensive land-use planning. Under the law, development of natural ecosystems must combine goals, policies, and practices towards the sustainable use of natural resources and the protection of biological diversity. Thus, ecosystem manipulation must be able to counter fragmentation of natural ecosystems and isolation of natural reserves, while providing for human needs. Assessment of the potential of natural ecosystems and management impacts are required. Multiple-resource simulation is an assessment and land-use planning tool that permits managers and decision makers to comply with the law, providing a flexible, user-oriented system that can meet the needs of managers, conservationists, and researchers. A multiple-resource model and an example of how it can be applied to meet planning needs is presented for discussion.     

Landscape ecological assessment: a tool for integrating biodiversity issues in strategic environmental assessment and planning

To achieve a sustainable development, impacts on biodiversity of urbanisation, new infrastructure projects and other land use changes must be considered on landscape and regional scales. This requires that important decisions are made after a systematic evaluation of environmental impacts. Landscape ecology can provide a conceptual framework for the assessment of consequences of long-term development processes like urbanisation on biodiversity components, and for evaluating and visualising the impacts of alternative planning scenarios. The aim of this paper was to develop methods for integrating biodiversity issues in planning and strategic environmental assessment in an urbanising environment, on landscape and regional levels. In order to test developed methods, a case study was conducted in the region of Stockholm, the capital of Sweden, and the study area embraced the city centre, suburbs and peri-urban areas. Focal species were tested as indicators of habitat quality, quantity and connectivity in the landscape. Predictive modelling of habitat distribution in geographic information systems involved the modelling of focal species occurrences based on empirical data, incorporated in a landscape ecological decision support system. When habitat models were retrieved, they were applied on future planning scenarios in order to predict and assess the impacts on focal species. The scenario involving a diffuse exploitation pattern had the greatest negative impacts on the habitat networks of focal species. The scenarios with concentrated exploitation also had negative impacts, although they were possible to mitigate quite easily. The predictions of the impacts on habitats networks of focal species made it possible to quantify, integrate and visualise the effects of urbanisation scenarios on aspects of biodiversity on a landscape level.     

Characterization and dispersion modeling of odors from a piggery facility

Piggeries are known for their nuisance odors, creating problems for workers and nearby residents. Chemical substances that contribute to these odors include sulfurous organic compounds, hydrogen sulfide, phenols and indoles, ammonia, volatile amines, and volatile fatty acids. In this work, daily mean concentrations of ammonia (NH3) and hydrogen sulfide (H2S) were measured by hand-held devices. Measurements were taken in several places within the facility (farrowing to finishing rooms). Hydrogen sulfide concentration was found to be 40 to 50 times higher than the human odor threshold value in the nursery and fattening room, resulting in strong nuisance odors. Ammonia concentrations ranged from 2 to 18 mL m(-3) and also contributed to the total odor nuisance. Emission data from various chambers of the pig farm were used with the dispersion model AERMOD to determine the odor nuisance caused due to the presence of H2S and NH3 to receptors at various distances from the facility. Because just a few seconds of exposure can cause an odor nuisance, a "peak-to-mean" ratio was used to predict the maximum odor concentrations. Several scenarios were examined using the modified AERMOD program, taking into account the complex terrain around the pig farm.     

Municipal hotlines and automated weather stations as a tool for monitoring bad odour dispersion: the northern Negev case

Bad odours are often dispersed from chemical industries, waste dumps, sewer plants, and other facilities. They are indicative of pollution emissions from these sites and cause discomfort, apprehension, and sometimes signal the presence of health hazards. Monitoring the pollution by direct means, such as chemical analysis of ambient air, is obviously the most reliable mechanism to acquire data regarding pollution. However, this is not always possible. In this paper we report on the value of local government hotlines that record information provided by the public regarding bad odours. These data can alert the authorities to the existence of pollution and should be regarded as potentially useful when collected in conjunction with information from automated weather stations. An analysis of data from the Be'er Sheva municipality and the Ramat Negev regional council hotlines is provided. Complaints recorded by these systems were correlated with weather data from local automatic weather stations to indicate the sources of the bad odours. Wind direction was found to be highly correlated with bad odour and pollution sources, revealing consistent patterns in terms of the time of day and weather conditions.     

Multicriteria analysis of environmental quality in Taipei: public preferences and improvement strategies

The public preferences for environmental quality should be a primary consideration of planners and decision-makers in environmental systems planning. In the first stage of multicriteria analysis, a multi-attribute evaluation model for determining public preferences is formulated. The environmental indices are defined for a comparison of environmental quality in different metropolitan districts. The public preferences of the environmental quality in Taipei are obtained using the weighted average rating method. The results indicate air quality and noise pollution as main public concern. In the second stage of multicriteria analysis, strategies are proposed to improve the air quality, and criteria are established. The experts evaluated all alternative strategies according to the criteria. The alternatives are ranked applying the compromise ranking method.     

College and university environmental programs as a policy problem (part 2): strategies for improvement

Environmental studies and environmental sciences programs in American and Canadian colleges and universities seek to ameliorate environmental problems through empirical enquiry and analytic judgment. In a companion article (Part 1) we describe the environmental program movement (EPM) and discuss factors that have hindered its performance. Here, we complete our analysis by proposing strategies for improvement. We recommend that environmental programs re-organize around three principles. First, adopt as an overriding goal the concept of human dignity??defined as freedom and social justice in healthy, sustainable environments. This clear higher-order goal captures the human and environmental aspirations of the EPM and would provide a more coherent direction for the efforts of diverse participants. Second, employ an explicit, genuinely interdisciplinary analytical framework that facilitates the use of multiple methods to investigate and address environmental and social problems in context. Third, develop educational programs and applied experiences that provide students with the technical knowledge, powers of observation, critical thinking skills and management acumen required for them to become effective professionals and leaders. Organizing around these three principles would build unity in the EPM while at the same time capitalizing on the strengths of the many disciplines and diverse local conditions involved.