EIA screening and nature protection in Denmark

The number of environmental impact assessment (EIA) screenings in Denmark has increased dramatically since 2000. This is a consequence of increased pig production as well as the concentration of production on larger farms. In the same period, EIA rules have developed primarily due to an increased focus on the protection of groundwater and Natura 2000 sites. In particular, the implementation of Natura 2000 in Danish legislation has increased the demands on many farms. In its rulings on appealed cases, the Nature Protection Board of Appeal has strengthened its demands, and this is mirrored in screening practices. In this paper, the demands formulated in the guidelines of local authorities were analysed in order to investigate how the protection of groundwater, coastal waters, lakes and Natura 2000 sites develops through EIA screening. It is concluded that the level of protection has improved, and that the main cause for this is not EIA regulations as such, but the positive role which the implementation of the Natura 2000 objectives has played in this development. However, it was also found that the formulation of demands varies greatly between the counties, thus often resulting in ambiguity and leaving room for quite different practices in different counties.     

温度变化实验和温度循环筛选

本文阐述了温度变化试验和温度循环试验方法和对产品质量影响的重要性.     

Lead accumulation in different Chinese cabbage cultivars and screening for pollution-safe cultivars

Recently, the concept of pollution-safe cultivars (PSCs) was proposed to minimize the influx of pollutants to the human food chain. Variations in lead (Pb) uptake and translocation among Chinese cabbage (Brassica pekinensis L.) cultivars were investigated in a pot-culture experiment and a field-culture experiment to screen out Pb-PSCs for food safety. The results of the pot-culture experiment showed that shoot Pb concentrations under two Pb treatments (500 and 1500 mg kg^?1) varied significantly (p < 0.05) between cultivars, with average values of 3.01 and 6.87 mg kg^?1, respectively. Enrichment factors (EFs) and translocation factors (TFs) in cultivars were less than 0.50 and varied significantly (p < 0.05) between cultivars. Shoot Pb concentrations in 12 cultivars under treatment T₁ (500 mg kg^?1) were lower than 2.0 mg kg^?1. The field-culture experiment further confirmed Qiuao, Shiboqiukang and Fuxing 80 as Pb-PSCs, which were suitable to be cultivated in low-Pb (<382.25 mg kg^?1) contaminated soils and harmless to human health as foods.     

A screening model for fate and transport of biodegradable polyesters in soil

A numerical model for predicting the fate and transport of biodegradable polyester residues in soil, following successive applications of mulch film, was developed and applied. The polymer, applied on surface soil, was assumed to be converted into by-products (monomers), according to a first order kinetics with constant K(1deg). The monomers released were assumed to sorb on soil organic matter (according to a first-order kinetics with constant K(s)), to be leached with the seepage water, through vertical advection and hydrodynamic dispersion, and biodegraded (according to a first-order kinetics with constant K(b)). Results suggested that, to assess a possible build-up of mulch film (as a polymer) on the surface soil, the degradation constant K(1deg) relating the polymer conversion to by-products should be known, whereas the biodegradation constant K(b) indicates there is no danger of groundwater pollution. Likewise, on the basis of by-product concentration in deep soil, soil pollution should not occur.     

Cadmium in aquatic microcosms: Implications for screening the ecological effects of toxic substances

A two-phase set of experiments was conducted to address some of the problems inherent in ecological screening of toxic substances in aquatic microcosms. Phase I was a 4×4 factorial experiment dealing with the interactive effects of cadmium and nutrients in static microcosms. Phase II was a 2×4 factorial experiment using flowthrough microcosms to study temporal aspects of system behavior in response to nutrient loading and chronic versus acute cadmium perturbations. Nutrient enrichment resulted in increased biomass and metabolic activity in both static and flowthrough microcosms. Cadmium treatments generally resulted in a decrease in abundance of grazing crustaceans and a subsequent increase in community respiration, suggesting a change in community structure from a grazing to a detritus food chain. Of the variables measured, community metabolism, community composition, and output/input ratios of nitrate-nitrogen were the most useful indicators of system response to cadmium. Nutrient enrichment significantly influenced cadmium effects with respect to most of the variables measured; high levels of enrichment reduced the effects of cadmium. For screening the ecological effects of toxic chemicals, a series of experiments is proposed, including 1) relatively simple static microcosms, 2) flow through microcosms, and 3) more detailed but selective studies in microcosms derived from specific ecosystems. Each step yields increasingly more information and serves as a guide for subsequent experiments; in addition, each step more closely approximates natural ecosystems.     

A GIS-based approach for the screening assessment of noise and vibration impacts from transit projects

Urban transportation projects are essential in increasing the efficiency of moving people and goods within a city, and between cities. Environmental impacts from such projects must be evaluated and mitigated, as applicable. Spatial modeling is a valuable tool for quantifying the potential level of environmental consequences within the context of an environmental impact assessment (EIA) study. This paper presents a GIS-based tool for the assessment of airborne-noise and ground-borne vibration from public transit systems, and its application to an actual project. The tool is based on the US Federal Transit Administration's (FTA) approach, and incorporates spatial information, satellite imaging, geostatistical modeling, and software programming. The tool is applied on a case study of initial environmental evaluation of a light rail transit project in an urban city in the Middle East, to evaluate alternative layouts. The tool readily allowed the alternative evaluation and the results were used as input to a multi-criteria analytic framework.     

A GIS model-based screening of potential contamination of soil and water by pyrethroids in Europe

The paper presents a geographic information system (GIS) model-based approach for analysis of potential contamination of soil and water by pyrethroids for the European continent. Pyrethroids are widely used pesticides and their chemical and toxicological characteristics suggest there may be concerns about human health and ecosystems, although so far there is no strong evidence indicating actual risk. However, little monitoring has been conducted and limited experimental information is available. We perform an assessment exercise that demonstrates how accessible information and GIS-based modeling allow to estimate the spatial distribution of chemical concentrations and fluxes at a screening level. The assessment highlights potential hot spots and the main environmental transport pathways, in a quick and simple way. By combining information on pesticide use, crop distribution and landscape and climate parameters we identify potential problem areas to help focusing monitoring campaigns. The approach presented here is simple and fast, and can be applied to virtually all pesticide classes used over a large domain, and is therefore suitable for the screening of large quantities of chemicals, of which the majority has not undergone any systematic environmental monitoring program. The method has been tested through benchmarking with other well-established models. However, further research is needed to evaluate it against experimental observations.     

Application of land-use data and screening tests for evaluating pesticide runoff toxicity in surface waters

Survey information on pesticide usage in New Zealand during 1985–1989 is summarized by regions and principal applications. Two screening tests, one based on a simple water-balance method and the other based on a semiempirical runoff formula, have been used to identify 18 pesticides with application rates that may yield runoff concentrations that are harmful to aquatic fauna. These are predominantly associated either with intensive applications in horticulture or extensive applications to cereal crops and pasture. The purpose of the screening tests was to calculate typical edge-of-field concentrations in runoff and, by comparing them with known aquatic toxicity values, determine which compounds are applied at rates that may yield toxic runoff. While it may be possible to extend these methods to calculate typical surface water concentrations, further studies will be needed to evaluate pesticide persistence and assimilation in stream channels.     

A graphical screening method for assessing stream water quality using specific conductivity and alkalinity data

In areas of varying geology, it is difficult to infer water quality from specific conductance or electrical conductivity (EC) data without an understanding of the expected range of EC values based on local bedrock composition. This paper describes a user-friendly graphical screening method that addresses this issue by plotting the EC against concurrent alkalinity data, which correlates well with the presence of carbonate bedrock under natural conditions, and thus serves as an index of bedrock type. The upper limit of EC vs. alkalinity expected in a stream is determined using regional groundwater quality data, based on the assumption that stream chemistry reflects groundwater under baseflow conditions. Stream samples with EC/alkalinity values that consistently plot above this limit are considered impacted by anthropogenic sources. The effect of dilution and runoff on the EC vs. alkalinity plot of stream samples is considered using a simple baseflow/storm runoff-mixing model. The graphical method's utility as a screening tool is demonstrated by application to stream chemistry data from watersheds of southeastern Pennsylvania and northwestern New Jersey in several distinct geologic settings; however the method is general and widely applicable to watersheds in humid temperate regions. Its use is intended for watershed stewards of both professional and nonprofessional qualification.     

Evaluation of alternative approaches for screening contaminated sediments and soils for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans

Traditional high resolution mass spectrometry (HRMS) analysis for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) can be time consuming and expensive. Consequently, alternative methods are of great interest to regulatory agencies and others characterizing contaminated sites. One factor that hinders acceptance of alternative methods is a lack of performance information that assesses the alternative method's impacts on analytical results. The U.S. Environmental Protection Agency's Superfund Innovative Technology Evaluation Monitoring and Measurement Technologies Program (EPA SITE MMT) encourages the development and implementation of innovative and alternative monitoring methods by providing performance information on site characterization technologies. This paper presents a comparison of the results obtained from laboratory-based alternative approaches for screening sediment and soil samples for dioxin toxicity equivalents (TEQ(D/F)) to results obtained using traditional HRMS. The laboratory-based approaches included modifying the traditional HRMS analysis to make it more cost-effective (alternate 1613B), analyzing extracts that had been prepared for HRMS using low resolution mass spectrometry, and determining total organic carbon (TOC) content as an indicator of PCDD/F content. These comparisons demonstrated that TEQ(D/F) values generated using toxicity equivalency factors proposed by the World Health Organization in 1998 applied to alternate 1613B and LRMS analyses have a strong linear correlation to the TEQ(D/F) values derived in the same fashion from traditional HRMS analysis. These results would have placed >90% of the samples within the same concentration intervals using ranges of <0.05, 0.05-0.50, 0.50-5, and >5ng TEQ/g. Natural log transformed data for TOC had significantly weaker correlation to TEQ(D/F), indicating that TOC is not a reliable indicator of TEQ(D/F) concentrations.     

Mapping hazard from urban non-point pollution: a screening model to support sustainable urban drainage planning

Non-point sources of pollution are difficult to identify and control, and are one of the main reasons that urban rivers fail to reach the water quality objectives set for them. Whilst sustainable drainage systems (SuDS) are available to help combat this diffuse pollution, they are mostly installed in areas of new urban development. However, SuDS must also be installed in existing built areas if diffuse loadings are to be reduced. Advice on where best to locate SuDS within existing built areas is limited, hence a semi-distributed stochastic GIS-model was developed to map small-area basin-wide loadings of 18 key stormwater pollutants. Load maps are combined with information on surface water quality objectives to permit mapping of diffuse pollution hazard to beneficial uses of receiving waters. The model thus aids SuDS planning and strategic management of urban diffuse pollution. The identification of diffuse emission 'hot spots' within a water quality objectives framework is consistent with the 'combined' (risk assessment) approach to pollution control advocated by the EU Water Framework Directive.     

Individual differences in reactions towards color in simulated healthcare environments: The role of stimulus screening ability

The notion that the physical healthcare environment can affect our mood and behavior is well established. Despite this, individual differences in sensitivity to environmental stimuli have not received much attention. With the current research showing the importance of individual differences in sensitivity towards color, these may explain the contradictory effects found in color research. Two experiments focused on differences in environmental sensitivity, measured with stimulus screening ability. In both experiments, participants were presented with a scenario describing hospitalization with appendicitis and were exposed to a photo of a hospital room. The experiments tested the effects of environmental coloring of the hospital room (green and orange, both contrasted with white as a control condition), and the moderating role of stimulus screening ability (high-screeners vs. low-screeners) on stress (study 1) and arousal (study 2), and cognitive appraisals of the room (study 2). Stress-reducing effects of green and arousal-inducing effects of orange were both more pronounced for people scoring low on stimulus screening ability than for those who are able to effectively screen out complexity in the environment (high-screeners).     

Minimizing life-cycle costs of gun propellant selection through model-based decision making: a case study in environmental screening and performance testing

The work presented here demonstrates the first phases of a newly-proposed gun propellant formulation process that will minimize life-cycle costs through science-based design. This new approach to gun propellant formulation proposes maximal use of modeling and simulation in the earliest phases of the developmental cycle to screen candidate formulations, resulting in the elimination of probable poor performers and the identification of the most promising candidates for further study and testing. The screening and identification of promising candidate formulations is demonstrated in the study presented here under the assumption of a specific weapon platform and user requirements. The process of selecting a propellant for the assumed gun system application has been distilled into a series of measurable steps leading from a set of candidate materials, through logical and numerical filters, to a shorter list of energetic materials demonstrated as viable choices for the weapon platform. Environmental filtering and performance modeling are used to screen propellants through a well-defined sequence of tests designed to weed out materials that do not meet standards in terms of safety, energy, or manufacturability. Because much of the testing is performed by computer modeling, the gun systems and energetic materials need not be present (nor even existent) in order to be described and matched against performance requirements for future applications. The calculations presented here demonstrate that utilizing computer models in the early developmental stages of the formulation process rather than physical testing produces enormous savings in labor, material, and environmental costs, along with a tremendous reduction in the time required to select a "best candidate" propellant.     

Priority screening of toxic chemicals and industry sectors in the U.S. toxics release inventory: a comparison of the life cycle impact-based and risk-based assessment tools developed by U.S. EPA

Life Cycle Impact Assessment (LCIA) and Risk Assessment (RA) employ different approaches to evaluate toxic impact potential for their own general applications. LCIA is often used to evaluate toxicity potentials for corporate environmental management and RA is often used to evaluate a risk score for environmental policy in government. This study evaluates the cancer, non-cancer, and ecotoxicity potentials and risk scores of chemicals and industry sectors in the United States on the basis of the LCIA- and RA-based tools developed by U.S. EPA, and compares the priority screening of toxic chemicals and industry sectors identified with each method to examine whether the LCIA- and RA-based results lead to the same prioritization schemes. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) is applied as an LCIA-based screening approach with a focus on air and water emissions, and the Risk-Screening Environmental Indicator (RSEI) is applied in equivalent fashion as an RA-based screening approach. The U.S. Toxic Release Inventory is used as the dataset for this analysis, because of its general applicability to a comprehensive list of chemical substances and industry sectors. Overall, the TRACI and RSEI results do not agree with each other in part due to the unavailability of characterization factors and toxic scores for select substances, but primarily because of their different evaluation approaches. Therefore, TRACI and RSEI should be used together both to support a more comprehensive and robust approach to screening of chemicals for environmental management and policy and to highlight substances that are found to be of concern from both perspectives.