Atmospheric pollution transport: the parallelization of a transport & chemistry code

We discuss a model for computing the chemical reactions occurring among air pollutants and predict their dispersion in the atmosphere. We consider a parallel implementation on a CRAY T3D, using up to 128 processors. A regular subdomain decomposition is considered to optimize inter-processor communications, while load balancing – the main technical difficulty to obtain a good efficiency – is achieved by re-assigning temporarily pieces of work to other processors, according to a global strategy. The performance of our implementation is described by an analytical relation whose validity is checked on realistic data sets. A speedup of 100 is obtained with 128 processors.     

Enzyme-immunoassay techniques for the detection of atrazine in water samples: Evaluation of a commercial tube based assay

Environmental immunoassays can help lower the operating costs and improve the effectiveness of residue laboratories. The present study assesses the ability of a commercially available enzyme immunoassay (EIA) to detect triazine herbicides in water. The tube based EIA could detect atrazine in lake and river water with detection limits of 62 pg/mL and 180 pg/mL respectively. The assay's ability to quantify atrazine in a set of 124 water samples taken from many parts of Canada was compared with a reference method that used gas chromatographic separation combined with a nitrogen phosphorous detector (GC-NPD) (R=0.919). A 71 % reduction in analytical load was achieved at a threshold concentration of 1 ng/mL. There were 2.4 % false negative and 0.8 % false positive results associated with that load reduction. The variability of the assay control parameters was generally within two standard deviations of the mean response for 65 assays. The EIA for atrazine is recommended for use as a screening technique and as an inexpensive way to monitor triazine levels in waters that are known to be contaminated with those herbicides.     

Modelling of atrazine transport in the presence of surfactants

Laboratory experiments were conducted to examine the effect of detergents on transport of atrazine [2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine] through loam and sandy loam soils under saturation conditions. The Convection Dispersion Equation (CDE) was used to model and quantify the effects of detergents on atrazine model parameters: the retardation factor (R), pore velocity (v) and dispersion coefficient (D). The transport parameters were estimated using moment technique and partition coefficient obtained from batch experiments and compared with best-fitted parameters, R and D, keeping pore velocity constant. Results indicated the CDE model was not successful in predicting atrazine transport in the presence of surfactants at high concentrations. In the case of anionic surfactant with Elora loam, the average predicted R and D from moment technique of 3.4 and 11.1 cm2/h, respectively were significantly different than fitted parameters (R = 39 and D = 227 cm2/h). The poor performance of CDE in the presence of surfactants results from physiochemical changes in herbicide solubility and retention to the soil matrix rather than changes in soil hydraulic properties since the predicted pore water velocities from moment technique were similar to those measured during leaching experiments. Nevertheless, BTC analysis with CDE showed that land application of anionic surfactant (sulphonic) significantly increased R and D and decrease v for both soils. Addition of sulphonic increased R of atrazine by 12 and 26 folds for loam and sandy loam soils, respectively. On the other hand non-ionic surfactants seemed to decrease R, especially in sandy loam soil, thus facilitating atrazine leaching through soil. Non-equilibrium conditions seemed to govern atrazine transport in the presence of surfactants; double peaks in breakthrough curves were observed, indicating a need for mathematical models to account for such phenomena. Atrazine dispersion and tailing seemed to be higher through Elora loam compared to Caledon sandy loam due to higher aggregation of the Elora soil.     

Atmospheric fate and transport of dioxins: local impacts

We conducted model simulations of the atmospheric fate and transport of PCDD/F to assess the fraction of emitted PCDD/F that would deposit within 100 km from the source. We considered eight major categories of PCDD/F emission sources and six different locations, to cover a wide range of source characteristics, PCDD/F congener profiles and particle size distributions, meteorological conditions and terrain configurations. These results suggest that for sources that have tall stacks and/or high plume rise (e.g., copper smelters, cement kilns, sinter plants), only a small fraction of PCDD/F emissions is deposited locally (typically, less than 10% within 100 km). Other source categories such as municipal solid waste incinerators, medical waste incinerators and diesel trucks lead to a greater fraction of PCDD/F being deposited locally; nevertheless, the majority of their PCDD/F emissions tends to be transported beyond 100 km. Although local impacts may need to be addressed for these latter source categories, it appears that the long-range potential impacts of PCDD/F need to be addressed for all source categories. Sensitivity studies were conducted to investigate the effect of various key model inputs on simulation results. These studies suggest that an advanced atmospheric dispersion model should be used for cases where PCDD/F emissions may present some local concerns because the results are very sensitive to the treatment of dispersion. Also, it is essential to obtain accurate characterizations of the particle size distribution of particulate PCDD/F because the dry deposition flux is very sensitive to the particle size distribution.     

Atmospheric transport of emissions over urban area sources

The method of variational imbedding has been applied in reducing the problem of solving the nonlinear partial differential equation governing steady-state, two-dimensional advective-diffusive transport of emissions from ground-based area sources to an equivalent initial value problem in ordinary differential equations. Picard's method has then been used to build up a sequence of successive approximations to density distribution of contaminants for the case when both turbulent diffusivity and mean downwind speed are taken to vary with the vertical distance coordinate according to the empirical power law. Solutions corresponding to a few simpler situations have also been presented in this paper.     

Atmospheric transport and transformation rate of sulfur dioxide

Pollutants immission episodes are monitored in a semi-rural area of Belgium. The responsibility for the episodes is attributed to more or less distant industrial zones. Sulfur dioxide to sulfate conversion is studied as a function of transfer duration between the industrial sources and the immission site. Ambient temperatures, mixing heights and deposition velocities seem to be the main parameters likely to influence the conversion rates which have been estimated at 0.020 h⁻¹ at 0°C up to 0.040 h⁻¹ at 20°C, with a global activation energy of 5.7 kcal. mole⁻¹.     

Chemotaxis to atrazine and detection of a xenobiotic catabolic plasmid in Arthrobacter sp. DNS10

Introduction

A plasmid named pDNS10 was detected from an atrazine-degrading strain Arthrobacter sp. DNS10 which has been isolated previously in our laboratory.

Materials and methods

In this paper, a special plasmid-detecting method and drop assays experiments were mainly used to achieve research goals.

Results and discussion

pDNS10 exhibited an excellent stability because it also could be detected even when the strain DNS10 has been subcultured under nonselective conditions for eight times. Over a 48-h incubation period, the OD₆₀₀ of samples inoculated with strain DNS10 and strain DNS10-ST (both of them contained pDNS10) were 0.31 ± 0.042 and 0.305 ± 0.034, respectively ,whereas the OD₆₀₀ of samples inoculated strain without pDNS10 (strain DNS10-PE) was only 0.138 ± 0.018. No atrazine was detected in the inoculated strain DNS10 and strain DNS10-ST samples at this period. Contrarily, the atrazine-degrading rate of strain DNS10-PE was only 5.23 ± 0.71%. Furthermore, both the two types of strains containing pDNS10 confirmed the presence of known degrading genes such as trzN, atzB, and atzC. It suggests that pDNS10 is an atrazine catabolic plasmid. In drop assays experiments, the wild-type strain DNS10 cells were chemotactically attracted to atrazine, whereas strain DNS10-PE showed no chemotaxis to atrazine and hydroxyatrazine. There was some relationship between atrazine degradation and the chemotactic response towards atrazine in strain DNS10.

Conclusions

The biochemical characteristics of pDNS10 and the chemotaxis characteristics of strain DNS10 could help us in better understanding of the mechanism of atrazine degradation by strain DNS10.     

Continuous time random walk model better describes the tailing of atrazine transport in soil

Contaminant transport in soils is complicated and involves some physical and chemical nonequilibrium processes. In this research, the soil column displacement experiments of Cl⁻ and atrazine under different flow velocities were carried out. The data sets of Cl⁻ transport in sandy loam fitted to the convection dispersion equation (CDE) and the two-region model (TRM) indicated that the effects of physical nonequilibrium process produced by immobile water on the breakthrough curves (BTCs) of Cl⁻ and atrazine transport through the repacking soil columns were negligible. The two-site model (TSM) and the continuous time random walk (CTRW) were also used to fit atrazine transport behavior at the flow rate of 19.86 cm h⁻¹. The CTRW convincingly captured the full evolution of atrazine BTC in the soil column, especially for the part of long tailing. However, the TSM failed to characterize the tailing of atrazine BTC in the soil column. The calculated fraction of equilibrium sorption sites, F, ranging from 0.78 to 0.80 for all flow rates suggested the contribution of nonequilibrium sorption sites to the asymmetry of atrazine BTCs. Furthermore, the data sets for the flow rates of 6.68 cm h⁻¹ and 32.81 cm h⁻¹ were predicted by the TSM and the CTRW. As to the flow rate of 6.68 cm h⁻¹, the CTRW predicted the entire BTC of atrazine transport better than the TSM did. For the flow rate of 32.81 cm h⁻¹, the CTRW characterized the late part of the tail better, while the TSM failed to predict the tailings of atrazine BTC.     

Toxicity of atrazine and its bioaccumulation and biodegradation in a green microalga,Chlamydomonas mexicana

This study evaluated the toxicity of herbicide atrazine, along with its bioaccumulation and biodegradation in the green microalga Chlamydomonas mexicana. At low concentration (10 μg L^?1), atrazine had no profound effect on the microalga, while higher concentrations (25, 50, and 100 μg L^?1) imposed toxicity, leading to inhibition of cell growth and chlorophyll a accumulation by 22 %, 33 %, and 36 %, and 13 %, 24 %, and 27 %, respectively. Atrazine 96-h EC50 for C. mexicana was estimated to be 33 μg L^?1. Microalga showed a capability to accumulate atrazine in the cell and to biodegrade the cell-accumulated atrazine resulting in 14–36 % atrazine degradation at 10–100 μg L^?1. Increasing atrazine concentration decreased the total fatty acids (from 102 to 75 mg g^?1) and increased the unsaturated fatty acid content in the microalga. Carbohydrate content increased gradually with the increase in atrazine concentration up to 15 %. This study shows that C. mexicana has the capability to degrade atrazine and can be employed for the remediation of atrazine-contaminated streams.     

Evaluation of flow injection analysis method with spectrophotometric detection for the determination of atrazine in soil extracts

A method for determining atrazine in soil extracts was evaluated by flow injection analysis with spectrophotometric detection. The method is based on the reaction of atrazine with pyridine in an acid medium followed by the reaction with NaOH and sulfanilic acid. Several analytical conditions were previously studied and optimized. Under the best conditions of analysis, the limits of detection and quantification were 0.15 and 0.45 mg L^?1, respectively, for a linear response between 0.50 and 2.50 mg L^?1, and a sampling throughput of 21 determinations per hour. Using the standard addition method, the maximum relative standard deviation of 17% and recovery values between 80 and 100% were observed for three extracts from soil samples with different composition. The proposed method is simple, low-cost and easy to use, and can be employed for studies involving atrazine in soil samples or for screening of atrazine in soils.     

Impact of long-term wastewater irrigation on sorption and transport of atrazine in Mexican agricultural soils

In the Mezquital Valley, Mexico, crops have been irrigated with untreated municipal wastewater for more than a century. Atrazine has been applied to maize and alfalfa grown in the area for weed control for 15 years. Our objectives were to analyse (i) how wastewater irrigation affects the filtering of atrazine, and (ii) if the length of irrigation has a significant impact. We compared atrazine sorption to Phaeozems that have been irrigated with raw wastewater for 35 (P35) and 85 (P85) years with sorption to a non-irrigated (P0) Phaeozem soil under rainfed agriculture. The use of bromide as an inert water tracer in column experiments and the subsequent analysis of the tracers' breakthrough curves allowed the calibration of the hydrodynamic parameters of a two-site non equilibrium convection-dispersion model. The quality of the irrigation water significantly altered the soils' hydrodynamic properties (hydraulic conductivity, dispersivity and the size of pores that are hydraulically active). The impacts on soil chemical properties (total organic carbon content and pH) were not significant, while the sodium adsorption ratio was significantly increased. Sorption and desorption isotherms, determined in batch and column experiments, showed enhanced atrazine sorption and reduced and slower desorption in wastewater-irrigated soils. These effects increased with the length of irrigation. The intensified sorption-desorption hysteresis in wastewater-irrigated soils indicated that the soil organic matter developed in these soils had fewer high-energy, easily accessible sorption sites available, leading to lower and slower atrazine desorption rates. This study leads to the conclusion that wastewater irrigation decreases atrazine mobility in the Mezquital valley Phaeozems by decreasing the hydraulic conductivity and increasing the soil's sorption capacity.     

Impact of long-term wastewater irrigation on sorption and transport of atrazine in Mexican agricultural soils

In the Mezquital Valley, Mexico, crops have been irrigated with untreated municipal wastewater for more than a century. Atrazine has been applied to maize and alfalfa grown in the area for weed control for 15 years. Our objectives were to analyse (i) how wastewater irrigation affects the filtering of atrazine, and (ii) if the length of irrigation has a significant impact. We compared atrazine sorption to Phaeozems that have been irrigated with raw wastewater for 35 (P35) and 85 (P85) years with sorption to a non-irrigated (P0) Phaeozem soil under rainfed agriculture. The use of bromide as an inert water tracer in column experiments and the subsequent analysis of the tracers’ breakthrough curves allowed the calibration of the hydrodynamic parameters of a two-site non equilibrium convection-dispersion model. The quality of the irrigation water significantly altered the soils’ hydrodynamic properties (hydraulic conductivity, dispersivity and the size of pores that are hydraulically active). The impacts on soil chemical properties (total organic carbon content and pH) were not significant, while the sodium adsorption ratio was significantly increased. Sorption and desorption isotherms, determined in batch and column experiments, showed enhanced atrazine sorption and reduced and slower desorption in wastewater-irrigated soils. These effects increased with the length of irrigation. The intensified sorption-desorption hysteresis in wastewater-irrigated soils indicated that the soil organic matter developed in these soils had fewer high-energy, easily accessible sorption sites available, leading to lower and slower atrazine desorption rates. This study leads to the conclusion that wastewater irrigation decreases atrazine mobility in the Mezquital valley Phaeozems by decreasing the hydraulic conductivity and increasing the soil's sorption capacity.     

A simple and sensitive bioassay for the detection of toxic materials using a unicellular green alga

A simple assay for phytotoxicity, using small scale cultures of Chlorella vulgaris, is described. Growth after 3 days' incubation in 0.5 cm(3) medium is assessed by DMSO-acetone extraction and chlorophyll determination. The method is sensitive enough to detect phytotoxicity in small samples of material and this is illustrated by the inhibitory effects of microgram additions of copper, cadmium and zinc.     

Atmospheric nitrogen compounds II: emissions,transport, transformation,deposition and assessment

The Atmospheric Nitrogen Compounds II: Emissions, Transport, Transformation, Deposition and Assessment workshop was held in Chapel Hill, NC from 7 to 9 June 1999. This international conference, which served as a follow-up to the workshop held in March 1997, was sponsored by: North Carolina Department of Environment and Natural Resources; North Carolina Department of Health and Human Services, North Carolina Office of the State Health Director; Mid-Atlantic Regional Air Management Association; North Carolina Water Resources Research Institute; Air and Waste Management Association, RTP Chapter; the US Environmental Protection Agency and the North Carolina State University (College of Physical and Mathematical Sciences, and North Carolina Agricultural Research Service). The workshop was structured as an open forum at which scientists, policy makers, industry representatives and others could freely share current knowledge and ideas, and included international perspectives. The workshop commenced with international perspectives from the United States, Canada, United Kingdom, the Netherlands, and Denmark. This article summarizes the findings of the workshop and articulates future research needs and ways to address nitrogen/ammonia from intensively managed animal agriculture. The need for developing sustainable solutions for managing the animal waste problem is vital for shaping the future of North Carolina. As part of that process, all aspects of environmental issues (air, water, soil) must be addressed as part of a comprehensive and long-term strategy. There is an urgent need for North Carolina policy makers to create a new, independent organization that will build consensus and mobilize resources to find technologically and economically feasible solutions to this aspect of the animal waste problem.     

Riboflavin-photosensitized degradation of atrazine in a freshwater environment

The effect of the photosensitizer riboflavin (0, 10, 50, 100 microM) on the fate of atrazine (10 mg/l) in a freshwater environment was studied. It was found that at 100 microM riboflavin significantly enhanced the degradation of atrazine and more than 80% of atrazine in a natural water environment was depleted in 72 h. The relative contribution of microbial assemblages and the freshwater matrix to the degradation of atrazine and the degradation kinetics of atrazine were compared under different experimental conditions. The products and pathways of atrazine transformation were studied with GC-MS and HPLC with a photodiode array detector. The results show that dealkylation and alkyl chain oxidation are involved in the degradation of atrazine.