Spatial variation of heavy metals in surface sediments of Hong Kong mangrove swamps

The degree of heavy metal contamination in the fine-grained (<63 microm) and sand-sized (2 mm-63 microm) fractions of surface sediments in 18 different mangrove swamps (144 random samples) in Hong Kong was examined. Higher concentrations of heavy metals were found in the fine-grained than the sand-sized fractions of the sediment; however, the differences between these two fractions became less significant when the swamp was more contaminated. The principal component analyses show that the 18 mangrove swamps, according to the median concentrations of total heavy metals, were clustered into four groups. The first group included three mangrove swamps in Deep Bay region which are seriously contaminated, with heavy metal concentrations in sediments around 80 microg g(-1) Cu, 240 microg g(-1) Zn, 40 microg g(-1) Cr, 30 microg g(-1) Ni, 3 microg g(-1) Cd and 80 microg g(-1) Pb. The second cluster, made up of another four swamps distributed in different geographical locations (two in Sai Kung district and two in Tolo region), also had elevated levels of Cu, Pb, Ni and Cr in the sediments. Field observation reveals that these seven stands received industrial, livestock and domestic sewage as well as pollution from mariculture activities, suggesting that anthropogenic input is the main source of heavy metal contamination in Hong Kong mangroves. The sediments from other mangrove swamps were relatively uncontaminated.     

Source apportionment of polycyclic aromatic hydrocarbons in surface sediments of the Bohai Sea, China

A total of 112 surface sediment samples covering virtually the entire Bohai Sea were analyzed for polycyclic aromatic hydrocarbons (PAHs), in order to provide the extensive information of recent occurrence levels, distribution, possible sources, and potential biological risk of these compounds in this area. Surface sediment samples were collected from the Bohai Sea using a stainless steel grab sampler. Sixteen PAHs were determined by a Finnigan TRACE DSQ gas chromatography/mass spectrometry. Diagnostic ratios, cluster analysis, and principal component analysis (PCA) with multivariate linear regression (MLR) were performed to identify and quantitatively apportion the major sources of sedimentary PAHs in the Bohai Sea. Concentrations of total PAHs in the Bohai Sea ranged widely from 97.2 to 300.7 ng/g (mean, 175.7?±?37.3 ng/g). High concentrations of PAHs were found in the vicinity of Luan River Estuary-Qinhuangdao Harbor, Cao River Estuary-Bohai Sea Center, and north of the Yellow River Estuary. The three-ring PAHs were most abundant, accounting for about 37?±?5 % of total PAHs. The four-ring and five-ring PAHs were the next dominant ones comprising approximately 29?±?7and 23?±?3 % of total PAHs, respectively. Concentrations of acenaphthylene, acenaphthene, and dibenz[a,h]anthracene are higher than Canadian interim marine sediment quality guideline values at most of the sites in the study area. Contamination levels of PAHs in the Bohai Sea were low in comparison with other coastal sediments in China and developed countries. The distribution pattern of PAHs and source identification implied that PAH contamination in the Bohai Sea mainly originates from petrogenic and pyrogenic sources. Further PCA/MLR analysis suggested that the contributions of spilled oil products (petrogenic), coal combustion, and traffic-related pollution were 39, 38, and 23 %, respectively. Pyrogenic sources (coal combustion and traffic-related pollution) contributed 61 % of anthropogenic PAHs to sediments, which indicates that energy consumption could be a dominant factor in PAH pollution in this area. Acenaphthylene, acenaphthene, and dibenz[a,h]anthracene are the three main species of PAHs with more ecotoxicological concern in the Bohai Sea.     

Contamination of rivers in Tianjin, China by polycyclic aromatic hydrocarbons

Tianjin urban/industrial complex is highly polluted by some persistent organic pollutants. In this study, the levels of 16 priority polycyclic aromatic hydrocarbons (PAHs) were tested in sediment, water, and suspended particulate matter (SPM) samples in 10 rivers in Tianjin. The total concentration of 16 PAHs varied from 0.787 to 1943 microg/g dry weight in sediment, from 45.81 to 1272 ng/L in water, and from 0.938 to 64.2 microg/g dry weight in SPM. The levels of PAHs in these media are high in comparison with values reported from other river and marine systems. Variability of total concentrations of PAHs in sediment, water, and SPM from nine different rivers is consistent with each other. No obvious trends of total PAHs concentration variations were found between upstream and downstream sediment, water, and SPM samples for most rivers, which indicate local inputs and disturbances along these rivers. The spatial distributions of three-phase PAHs are very similar to each other, and they are also similar to those found in topsoil. However, their chemical profiles are significantly different from that of topsoil. The change of profiles is consistent with the different aqueous transport capability of 16 PAHs. Low molecular weight PAHs predomination suggests a relatively recent local source and coal combustion source of PAHs in the study area.     

Distribution of polycyclic aromatic hydrocarbons in water and surface sediments from Daya Bay,China

Marine culture is thriving in China and represents a major component of the regional economy in coastal zones, yet the environmental quality of many of those areas has never been studied. This paper attempts to investigate the quality status of Daya Bay, a key aquaculture area in China. The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in water and sediment samples of the bay. The total concentrations of 16 PAHs varied from 4228 to 29325 ng l(-1) in water, and from 115 to 1134 ng g(-1) dry weight in sediments. In comparison to many other marine systems studied, the PAH levels in Daya Bay waters were relatively high, and at six sites they were sufficiently high (> 10 microg l (-1)) to cause acute toxicity. The PAH composition pattern in sediments suggest dominance by medium to high molecular weight compounds, and the ratio of certain related PAHs indicate important pyrolytic and petrogenic sources. Further analysis showed that the distribution coefficient (KD) increased with the particular organic carbon content of sediments, consistent with the PAH partition theory. The organic carbon normalised distribution coefficient (K(oc)) also increased with the compounds' octanol/water partition coefficient (K(ow)), confirming the potential applicability of the linear free energy relationships in the modelling and prediction of PAH behaviour in marine environments.     

Composition and distribution of polycyclic aromatic hydrocarbons in the surface sediments from the Susquehanna River

Polycyclic aromatic hydrocarbon (PAH) concentrations in 34 surface sediments along the Susquehanna River were investigated in 2000. The total concentrations of PAHs in the surface sediments of Lake Clarke, Lake Aldred, the upper Conowingo Reservoir, and the lower Conowingo Reservoir were 3.3+/-1.5 microg g-1 (n=9), 1.6+/-1.3 microg g-1 (n=4), 9.8+/-5.5 microg g-1 (n=7), and 4.0+/-1.2 microg g-1 (n=14), respectively. These represent the first comprehensive measurement of PAHs in Susquehanna River surface sediments. Overall, total PAH concentrations were relatively lower in Lake Aldred, which is more shallow and sloped, and significantly higher in the upper Conowingo Reservoir. The sediment PAH levels were related to river flow rates, which are indirectly correlated with the particle size of the surface sediments. Total PAH levels in all the studied sites were below the effects range median (ERM) of 44.8 microg g-1 with 38% (13 of the 34 sampling sites) exceeding the effects range low (ERL) of 4.02 microg g-1. Principal component analysis indicated that variations in the PAH compound patterns of each reservoir decreased from upstream to downstream, indicating that the surface sediments were mixed along the Susquehanna River. The PAH patterns in the lower Conowingo Reservoir sediments were a combination of those upstream sources. Source analysis using isomer ratios as indicators suggested that PAHs in the Susquehanna River surface sediment are derived from the combustion of fossil fuels such as coal and gasoline with coal as the major source of contaminants.     

Distribution of polycyclic aromatic hydrocarbons in the sediments of the Adriatic Sea

Distribution of the sixteen polycyclic aromatic hydrocarbons (PAHs) indicated from USEPA as priority pollutants was studied in surface sediments of two coastal areas of the Adriatic Sea. PAHs were recovered from the sediments by solvent extraction and then analyzed by means of gas chromatography-mass spectrometry. Total concentrations of the analytes in the range 24.1-501.1 ng/g were detected. The observed distribution has been discussed taking into account different aspects, such as the fluvial inputs and the grain size of the sediments. By using a molecular marker approach and characteristic compositional patterns it was possible to ascribe to combustion processes the main source of PAHs. Furthermore a good correlation between benzo[a]pyrene and the total concentration of PAHs (r=0.953) has been pointed out.     

Sorption-desorption behavior of polycyclic aromatic hydrocarbons in upstream and downstream river sediments

Sorption and desorption behaviors of phenanthrene and naphthalene were studied with the whole sediment, humic acid (HA) and humin samples from downstream and upstream sites along the Kishon River, Israel. The 13C nuclear magnetic resonance spectra and the sorption coefficients suggest that sorption occurs to both aromatic and aliphatic moieties of the sedimentary organic matter and that rigid paraffinic domains probably contribute to the sorption non-linearity. The carbon-normalized Freundlich affinity values for the two sorbates were significantly higher for the whole sediment and humin samples from the downstream region of the river than for the upstream sediment samples. On the basis of the measured affinity values, the sorbents can be arranged in the following order: humin>HA>whole sediment. Phenanthrene exhibited the lowest desorption from the whole sediment samples compared with the other sorbents. For naphthalene, the desorption hysteresis obtained with the whole sediment and humin samples were similar: both exhibited a decrease in desorption with decreasing solute concentration. The higher sorption affinities observed for all the organic fractions from the downstream sediment are suggested to be related to the low levels of polar domains and humin content. It is concluded that in bulk sediment samples, the overall contribution of the HA fraction to short-term sorption is of high importance, but the sorption non-linearity is controlled mainly by the humin complexes. The low desorption potential recorded for the whole sediment samples could affect the natural attenuation of the sorbed hydrophobic organic compounds.     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

Slurry-phase ozonation for remediation of sediments contaminated by polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are a group of toxic, persistent, bioaccumulating organic compounds containing two or more fused aromatic rings. They are listed by the U.S. Environmental Protection Agency as priority pollutants because of their carcinogenicity and toxicity. Employing ozonation as a remediation technique, this work investigated the treatability of a sediment sample from a freshwater boat slip subjected to coal tar contamination over a long period. The contaminated sediment sample contained high levels of PAHs in the forms of naphthalene, phenanthrene, pyrene, and benzo[a]pyrene, among other byproducts present in the humic and solid phases of the sediment. The objectives of this work were to examine (1) the degradation of PAHs in the contaminated sediment as treated by ozonation in the slurry form, (2) the effects of ozonation upon the soil matrix and the biodegradability of the resultant PAH intermediates, and (3) the feasibility of a combined technique using O3 as a pretreatment followed by biological degradation. The sediment was made into 3% w/w soil slurries and ozonated in a 1.7-L semi-batch, well-stirred reactor equipped with pH control and a cold trap for the gaseous effluent. Samples were collected after different ozonation durations and tested for biochemical oxygen demand (BOD), chemical oxygen demand (COD), UV absorbance, and toxicity, along with quantitative and qualitative determinations of the parent and daughter intermediates using gas chromatography/flame ionization detection (GC/FID), GC/mass spectrometry (MS), and ion chromatography (IC) techniques. The GC/MS technique identified 16 compounds associated with the humic and solid phases of the sediment. Intermediates identified at different ozonation times suggested that the degradation of PAHs was initiated by an O3 attack resulting in ring cleavage, followed by the intermediates' oxidation reactions with O3 and the concomitant OH radical toward their mineralization. Results suggested that ozonation for 2 hr removed 50-100% of various PAHs in the solid and liquid phases (as well as the aqueous and gaseous media resulting from the treatment process) of the sediment sample and that organic and inorganic constituents of the sediment were also altered by ozonation. Measurements and comparisons of BOD, COD, UV absorbance, and toxicity of the samples further suggested that ozonation improved the bioavailability and biodegradability of the contaminants, despite the increased toxicity of the treatment effluent. An integrated chemical-biological system appeared to be feasible for treating recalcitrant compounds.     

Study of metabolites from the degradation of polycyclic aromatic hydrocarbons (PAHs) by bacterial consortium enriched from mangrove sediments

The PAH metabolites produced during degradation of fluorene, phenanthrene and pyrene by a bacterial consortium enriched from mangrove sediments were analyzed using the on-fiber silylation solid-phase microextraction (SPME) combining with gas chromatography–mass spectrometry (GC–MS) method. Seventeen metabolites at trace levels were identified in different PAH degradation cultures based on the full scan mass spectra. In fluorene degradation cultures, 1-, 2-, 3- and 9-hydroxyfluorene, fluorenone, and phthalic acid were detected. In phenanthrene and pyrene degradation cultures, various common metabolites such as phenanthrene and pyrene dihydrodiols, mono-hydroxy phenanthrene, dihydroxy pyrene, lactone and 4-hydroxyphenanthrene, methyl ester, and phthalic acid were found. The detection of various common and novel metabolites demonstrates that SPME combining with GC–MS is a quick and convenient method for identification as well as monitoring the real time changes of metabolite concentrations throughout the degradation processes. The knowledge of PAH metabolic pathways and kinetics within indigenous bacterial consortium enriched from mangrove sediments contributes to enhance the bioremediation efficiency of PAH in real environment.     

Aliphatic and polycyclic aromatic hydrocarbons in the surface sediments from the Eastern Aegean: assessment and source recognition of petroleum hydrocarbons

Materials and methods  

Aliphatic and polycyclic aromatic hydrocarbons (PAHs) were determined in surficial sediments from the Aegean Sea in the Eastern Mediterranean in 2008.     

Distribution and sources of polycyclic aromatic hydrocarbons in surface sediments of rivers and an estuary in Shanghai, China

Concentrations, spatial distribution and sources of 17 polycyclic aromatic hydrocarbons (PAHs) and methylnaphthalene were investigated in surface sediments of rivers and an estuary in Shanghai, China. Total PAH concentrations, excluding perylene, ranged from 107 to 1707 ng/g-dw. Sedimentary PAH concentrations of the Huangpu River were higher than those of the Yangtze Estuary. The concentration of the Suzhou River was close to the average concentration of the Huangpu River. PAHs source analysis suggested that, in the Yangtze Estuary, PAHs at locations far away from cities were mainly from petrogenic sources. At other locations, both petrogenic and pyrogenic inputs were significant. In the Huangpu and Suzhou Rivers, pyrogenic input outweighed other sources. The pyrogenic PAHs in the upper reaches of the Huangpu River were mainly from the incomplete combustion of grass, wood and coal, and those in the middle and lower reaches were from vehicle and vessel exhaust.     

南宁市城市近郊型地下河表层沉积物多环芳烃污染特征及来源解析

为研究西南岩溶地区城市近郊型地下河沉积物中多环芳烃(PAHs)的污染特征及来源,选择南宁市清水泉地下河进行分析,沿地下河流动方向共采集8个表层沉积物样品,并检测16种PAHs的含量。结果表明,地下河表层沉积物中总PAHs为257.7～609.5ng/g(基于表层沉积物干质量计算),整体浓度处于中等污染水平;从PAHs组成来看,16种PAHs均被检出,且含量表现为4环PAHs5～6环PAHs2～3环PAHs;空间分布规律呈下游中游上游的趋势,且2～3环PAHs占比先增大后降低,而4～6环PAHs占比变化则相反;不同区域的PAHs来源各不相同,上游地区PAHs为燃烧来源,中游地区PAHs为石油来源,下游地区为混合来源,燃烧来源、石油来源与混合来源对PAHs的贡献率分别为28.4%、16.5%和55.1%。     

Environmental assessment of polycyclic aromatic hydrocarbons (PAHs) in surface sediments of the Santander Bay,Northern Spain

Samples of intertidal surface sediments (0-2 cm) were collected in 17 stations of the Santander Bay, Cantabric Sea, Northern Spain. The concentrations of polycyclic aromatic hydrocarbons (PAHs), 16, were analysed by HPLC and MS detection. Surface sediments show a good linear correlation among the parameters of the experimental organic matter evaluation, where total carbon (TC) and loss on ignition (LOI) are approximately 2.5 and 5 times total organic carbon (TOC). A wide range of TOC from 0.08% to 4.1%, and a broad distribution of the sum of sigma16PAHs, from 0.02 to 344.6 microg/g d.w., which can be correlated by an exponential equation to the TOC, has been identified. A qualitative relationship may be established between the industrial input along the rivers and the concentration of sigma6PAHs in the sediments of the estuaries: Boo estuary (8404-4631 microg/g OC), Solia-San Salvador estuaries (305-113 microg/g OC) and Cubas estuary (31-32 microg/g OC). This work shows a dramatic change in the spatial distribution in the concentration of PAHs of intertidal surface sediments. The left edge of the Bay has the main traffic around the city and the major source of PAHs is from combustion processes and estuarine inputs, leading to medium values of PAHs in the sediments; the right edge of the Bay has much lesser anthropogenic activities leading to lower values of PAHs in sediments. The distribution of individual PAHs in sediments varies widely depending on their structure and molecular weight; the 4-6 ring aromatics predominate in polluted sediments due to their higher persistence. The isomer ratio does not allow any clear identification of the PAHs origin. Environmental evaluation according to Dutch guidelines and consensus sediment quality guidelines based on ecotoxicological data leads to the same conclusion, sediments in the Santander Bay show a very different environmental quality depending on the spatial position from heavily polluted/medium effects to non-polluted/below threshold effects. These results indicate that local sources of PAHs, especially estuary discharges, lead to very different qualities of sediments in coastal zones, where traffic and industrial activities take place.     

Enrichment of polycyclic aromatic hydrocarbons (PAHs) in mariculture sediments of Hong Kong

Surface and core sediments collected from six fish farms in Hong Kong and from reference sites were investigated for the enrichment and sources of polycyclic aromatic hydrocarbons (PAHs). Moderately high ∑PAH₁₆ levels (123-947 ng g⁻¹, mean: 450 ng g⁻¹) were found in the surface aquaculture sediments. In comparison with the sediments from the reference sites, the average enrichment percentage of total organic carbon (TOC) and PAHs in surface sediments were 21.4 and 43.8%, respectively, and in the core sediments, 24.6 and 73.7%, respectively. Mathematical source apportionment analyses (i.e. isomer ratios, hierarchical cluster analysis, principal components analysis with multiple linear regression analysis) suggested a higher percentage of petrogenic sources in aquaculture sediments. The fish feeds might be the main source of the enriched PAHs in the aquaculture sediments. To our knowledge, this is the first study showing that PAHs in aquaculture sediments could be attributed to human aquaculture activities.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from marine sediments and soil samples

Supercritical fluid extraction (SFE) was used to extract polycyclic aromatic hydrocarbons (PAH) from a certified sample of marine sediment. This sample contains a great number of organic pollutants that are present in low concentrations. The extractions were carried out at 50 and 80 degrees C, at a pressure varying from 230 to 600 bar and using CO2 in the supercritical phase and the effect of three organic modifiers (methanol, n-hexane and toluene), added at 5%/vol, at the same temperature and pressure conditions, were then considered. PAHs were characterized by GC-MS and the recover yield was estimated for 6 PAHs that were representative of those present in the sample, according to their molecular weight and to the number of condensed rings. The analytical conditions giving the best recovery efficiency were used on an unpolluted soil sample spiked with 11 PAHs of environmental importance at a concentration similar to that certified for the sediment sample. An increase in the yield of recovered PAHs, using methanol as co-solvent, was observed while higher temperatures caused a negative effect on the quantity of recovered pollutants. The recovery yield for PAHs from the spiked soil sample was measured and found to be greater than 90%. Better recoveries were obtained for those compounds with higher molecular weight.     

Photolysis of polycyclic aromatic hydrocarbons in water

We have studied the photochemical reactions of eight polycyclic aromatics and heteroatom analogs (PAHs). Quantum yields and rate constants in sunlight and at single wavelengths were measured and half-lives of the PAHs as a function of the time of year were calculated. Product studies and the effect of humic acid and oxygen on rates are reported.     

Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Source apportionment of polycyclic aromatic hydrocarbons in surface soil in Tianjin, China

Principal component analysis and multiple linear regression were applied to apportion sources of polycyclic aromatic hydrocarbons (PAHs) in surface soils of Tianjin, China based on the measured PAH concentrations of 188 surface soil samples. Four principal components were identified representing coal combustion, petroleum, coke oven plus biomass burning, and chemical industry discharge, respectively. The contributions of major sources were quantified as 41% from coal, 20% from petroleum, and 39% from coking and biomass, which are compatible with PAH emissions estimated based on fuel consumption and emission factors. When the study area was divided into three zones with distinctive differences in soil PAH concentration and profile, different source features were unveiled. For the industrialized Tanggu-Hangu zone, the major contributors were cooking (43%), coal (37%) and vehicle exhaust (20%). In rural area, however, in addition to the three main sources, biomass burning was also important (13%). In urban-suburban zone, incineration accounted for one fourth of the total.