The contribution from shipping emissions to air quality and acid deposition in Europe

A global three-dimensional Lagrangian chemistry-transport model STOCHEM is used to describe the European regional acid deposition and ozone air quality impacts along the Atlantic Ocean seaboard of Europe, from the SO2, NOx, VOCs and CO emissions from international shipping under conditions appropriate to the year 2000. Model-derived total sulfur deposition from international shipping reaches over 200 mg S m(-2) yr(-1) over the southwestern approaches to the British Isles and Brittany. The contribution from international shipping to surface ozone concentrations during the summertime, peaks at about 6 ppb over Ireland, Brittany and Portugal. Shipping emissions act as an external influence on acid deposition and ozone air quality within Europe and may require control actions in the future if strict deposition and air quality targets are to be met.     

Increase in summer European ozone amounts due to climate change

The local and regional distribution of pollutants is significantly influenced by weather patterns and variability along with the spatial patterns of emissions. Therefore, climatic changes which affect local meteorological conditions can alter air quality. We use the regional air quality model CHIMERE driven by meteorological fields from regional climate change simulations to investigate changes in summer ozone mixing ratios over Europe under increased greenhouse gas (GHG) forcing. Using three 30-year simulation periods, we find that daily peak ozone amounts as well as average ozone concentrations substantially increase during summer in future climate conditions. This is mostly due to higher temperatures and reduced cloudiness and precipitation over Europe and it leads to a higher number of ozone events exceeding information and warning thresholds. Our results show a pronounced regional variability, with the largest effects of climate change on ozone concentrations occurring over England, Belgium, Germany and France. The temperature-driven increase in biogenic emissions appears to enhance the ozone production and isoprene was identified as the most important chemical factor in the ozone sensitivity. We also find that summer ozone levels in future climate projections are similar to those found during the exceptionally warm and dry European summer of 2003. Our simulations suggest that in future climate conditions summer ozone might pose a much more serious threat to human health, agriculture and natural ecosystems in Europe, so that the effects of climate trends on pollutant amounts should be considered in future emission control measures.     

The impact of building recirculation rates on secondary organic aerosols generated by indoor chemistry

Numerous investigators have documented increases in the concentrations of airborne particles as a consequence of ozone/terpene reactions in indoor environments. This study examines the effect of building recirculation rates on the concentrations of secondary organic aerosol (SOA) resulting from reactions between indoor limonene and ozone. The experiments were conducted in a large environmental chamber using four recirculation rates (11, 14, 19 and 24 air change per hour (ACH)) and a constant outdoor air exchange rate (1 ACH) as well as constant emission rates for limonene and ozone. As the recirculation rates increased, the deposition velocities of ozone and SOA increased. As a consequence of reduced production rates (due to less ozone) and larger surface removal rates, number and mass concentrations of SOA in different size ranges decreased significantly at higher recirculation rates. Enhanced coagulation at higher recirculation rates also reduced particle number concentrations, while shifting size-distributions towards larger particles. The results have health implications beyond changes in exposures, since particle size is a factor that determines where a particle deposits in the respiratory tract.     

The effects of ozone/limonene reactions on indoor secondary organic aerosols

An indoor air quality model was used to predict dynamic particle mass concentrations based on homogeneous chemical mechanisms and partitioning of semi-volatile products to particles. The ozone–limonene reaction mechanism was combined with gas-phase chemistry of common atmospheric organic and inorganic compounds and incorporated into the indoor air quality model. Experiments were conducted in an environmental chamber to investigate secondary particle formation resulting from ozone/limonene reactions. Experimental results indicate that significant fine particle growth occurs due to the interaction of ozone and limonene and subsequent intermediate by-products. Secondary particle mass concentrations were estimated from the measured particle size distribution. Predicted particle mass concentrations were in good agreement with experimental results—generally within ∼25% at steady-state conditions. Both experimental and predicted results suggest that air exchange rate plays a significant role in determining secondary fine particle levels in indoor environments. Secondary particle mass concentrations are predicted to increase substantially with lower air exchange rates, an interesting result given a continuing trend toward more energy efficient buildings. Lower air exchange rates also shifted the particle size distribution toward larger particle diameters. Secondary particle mass concentrations are also predicted to increase with higher outdoor ozone concentrations, higher outdoor particle concentrations, higher indoor limonene emission rates, and lower indoor temperatures.     

Oxidant denuder sampling for analysis of polycyclic aromatic hydrocarbons and their oxygenated derivates in ambient aerosol: evaluation of sampling artefact

The concentrations of some polycyclic aromatic hydrocarbons (PAH) and oxygenated PAH (O-PAH) can be changed by oxidation reactions during sampling. This can lead to an over- or underestimation of the corresponding adverse health effects. The aim of this study was the evaluation of these sampling artefacts. The potential of using an oxidant denuder was shown by parallel low-volume sampling with and without MnO₂ ozone denuder. Twenty-three PAH and 11 O-PAH in ambient air were analysed, both in the vapour and particulate phase. The denuder was proven to be highly efficient for stripping ozone from air while causing no significant particle losses. In general, the concentrations of 5- to 7-ring PAH, which are predominantly associated with particles, were underestimated in non-denuded samples. The highest losses due to reaction with ozone and other atmospheric oxidants were observed for benzo[a]pyrene and perylene. Concurrently, the concentrations of most of the mainly particle-associated 4- to 5-ring O-PAH were higher in the non-denuded samples. The denuder did not only remove ozone, moreover other gaseous species such as more volatile PAH and O-PAH were partially oxidized on the catalytic surface, too. Degradation of PAH and concurrent degradation/formation reactions of O-PAH occurred. The corresponding reactivities of selected PAH and O-PAH are discussed.     

Ozone uptake by citrus trees exposed to a range of ozone concentrations

The Citrus genus includes a large number of species and varieties widely cultivated in the Central Valley of California and in many other countries having similar Mediterranean climates. In the summer, orchards in California experience high levels of tropospheric ozone, formed by reactions of volatile organic compounds (VOC) with oxides of nitrogen (NO_x). Citrus trees may improve air quality in the orchard environment by taking up ozone through stomatal and non-stomatal mechanisms, but they may ultimately be detrimental to regional air quality by emitting biogenic VOC (BVOC) that oxidize to form ozone and secondary organic aerosol downwind of the site of emission. BVOC also play a key role in removing ozone through gas-phase chemical reactions in the intercellular spaces of the leaves and in ambient air outside the plants. Ozone is known to oxidize leaf tissues after entering stomata, resulting in decreased carbon assimilation and crop yield. To characterize ozone deposition and BVOC emissions for lemon (Citrus limon), mandarin (Citrus reticulata), and orange (Citrus sinensis), we designed branch enclosures that allowed direct measurement of fluxes under different physiological conditions in a controlled greenhouse environment. Average ozone uptake was up to 11 nmol s^?1 m^?2 of leaf. At low concentrations of ozone (40 ppb), measured ozone deposition was higher than expected ozone deposition modeled on the basis of stomatal aperture and ozone concentration. Our results were in better agreement with modeled values when we included non-stomatal ozone loss by reaction with gas-phase BVOC emitted from the citrus plants. At high ozone concentrations (160 ppb), the measured ozone deposition was lower than modeled, and we speculate that this indicates ozone accumulation in the leaf mesophyll.     

Simple model for estimating dry deposition velocity of ozone and its destruction in a polluted nocturnal boundary layer

Determining the destructions of both ozone and odd oxygen, O_x, in the nocturnal boundary layer (NBL) is important to evaluate the regional ozone budget and overnight ozone accumulation. This work develops a simple method to determine the dry deposition velocity of ozone and its destruction at a polluted nocturnal boundary layer. The destruction of O_x can also be determined simultaneously. The method is based on O₃ and NO₂ profiles and their surface measurements. Linkages between the dry deposition velocities of O₃ and NO₂ and between the dry deposition loss of O_x and its chemical loss are constructed and used. Field measurements are made at an agricultural site to demonstrate the application of the model. The model estimated nocturnal O₃ dry deposition velocities from 0.13 to 0.19 cm s^?1, very close to those previously obtained for similar land types. Additionally, dry deposition and chemical reactions account for 60 and 40% of the overall nocturnal ozone loss, respectively; ozone dry deposition accounts for 50% of the overall nocturnal loss of O_x, dry deposition of NO₂ accounts for another 20%, and chemical reactions account for the remaining 30%. The proposed method enables the use of measurements made in typical ozone field studies to evaluate various nocturnal destructions of O₃ and O_x in a polluted environment.     

European abatement of surface ozone in a global perspective

EU's programme Clean Air for Europe (CAFE) is presently revising the policy on air quality which will lead to the adoption of a thematic strategy on air pollution under the Sixth Environmental Action Programme by mid-2005. For the abatement of surface ozone it is becoming evident that processes outside European control will be crucial for meeting long-term aims and air quality guidelines in Europe in the future. Measurements and modelling results indicate that there is a strong link between climate change and surface ozone. A warmer and dryer European climate is very likely to lead to increased ozone concentrations. Furthermore, increased anthropogenic emissions in developing economies in Asia are likely to raise the hemispheric background level of ozone. A significant increase in the background concentration of ozone has been observed at several sites in Northern Europe although the underlying causes are not settled. The photochemical formation of tropospheric ozone from increased concentrations of methane and CO may also lead to a higher ozone level on a global scale. Gradually, these effects may outweigh the effect of the reduced European ozone precursor emissions. This calls for a global or hemispheric perspective in the revision of the European air quality policy for ozone.     

Ozone concentrations at a high altitude station in the Central Massif (Spain)

In order to contribute to current knowledge of ozone concentrations and transport across the Central Massif, a monitoring station was installed at 1780 m on the upper Spanish plateau about 55 km from the city of Madrid. Ozone concentrations and standard meteorological variables were measured in June and July 2002. A smoothed ozone hourly cycle was obtained with mean values of 120 and 110 microgm(-3) during day-time and night-time, respectively. The highest ozone concentrations were recorded in the SE-S-SW wind sectors, proving the influence of transport from the Madrid urban plume to the upper plateau. This assumption was also supported by the satisfactory correlation between ozone peaks obtained at the monitoring site and those recorded in a representative station on the foothill located on the lower plateau during episodic situations. To assess the contribution of long-range transport, backward air mass trajectories were computed each day of measurements at 820 hPa. The lowest ozone mean was linked to Atlantic Ocean air masses, and the highest to air masses from Central Europe.     

Further studies of oxidation processes on filter surfaces: Evidence for oxidation products and the influence of time in service

The sensory pollutants emitted by loaded ventilation filters are assumed to include products formed via oxidation of organics associated with captured particles. In this study, experiments were performed that used either particle production or ozone removal as probes to further improve our understanding of such processes. The measured ratio of downstream to upstream submicron particle concentrations increased when ozone was added to air passing through samples from loaded particle filters. Such an observation is consistent with low volatility oxidation products desorbing from the filter and subsequently partitioning between the gas phase and the surface of particles that have passed through the filter, including particles that were previously too small (<20 nm) to be detected by the instrument used in these studies. A related set of experiments conducted with unused filters and filters that had been in service from 2 to 16 weeks found that ozone removal efficiencies changed in a manner that indicated at least two different removal mechanisms—reactions with compounds present on the filter media following manufacturing and reactions with compounds associated with captured particles. The contribution from the former varies with the type and manufacturer of the filter, while that of the latter varies with the duration of service and nature of the captured particles. In complimentary experiments, a filter sample protected from ozone during its 9 weeks of service had higher ozone removal efficiencies than an identical filter not protected from ozone during the same 9 weeks of service filtering the same air. This result indicates that a filter's exposure history subsequently influences the quantity of oxidation products generated when ozone-containing air flows through it.     

Estimation of the Natural Background of Ozone Present at Surface Rural Locations

The natural background in the ozone concentration at rural locations in the United States and western Europe has been estimated by use of several approaches. The approaches utilized include the following: (1) historical trends in ozone concentration measurements, (2) recent ozone measurements at remote sites, (3) use of tracers of air originating in the stratosphere or upper troposphere and (4) results from applications of tropospheric photochemical models. While each of these approaches has its own limitations it appears that the natural background of ozone during the warmer months of the year is in the range of 10 to 20 ppb. Most of the ozone originating in the lower stratosphere or upper troposphere is lost by chemical or physical removal processes as well as undergoing dilution by air in the lower troposphere before reaching ground level rural locations. Lower tropospheric photochemical processes, those below 5 km, are likely to account for most of the ozone measured at rural locations during the warmer months of the year.

A key aspect to improved quantitation of the contributions from lower tropospheric photochemical processes to ozone concentrations continues to be more extensive atmospheric measurements of the distribution of reactive species of nitrogen. The emission densities of anthropogenic sources of NO_x are known to be highly variable over populated areas of continents as well as between continental areas and the oceans. The emission densities of biogenic sources of NO_x are small, likely to be highly variable, but poorly quantitated. These wide variations indicate the need for use of three dimensional tropospheric photochemical models over large continental regions.

Available results do indicate higher efficiencies for ozone formation at lower NO_x concentrations, especially below 1 ppb.     

Ozone decay rates in residences

In urban and suburban settings, indoor ozone exposures can represent a significant fraction of an individual's total exposure. The decay rate, one of the factors determining indoor ozone concentrations, is inadequately understood in residences. Decay rates were calculated by introducing outdoor air containing 80-160 parts per billion ozone into 43 residences and monitoring the reduction in indoor concentration as a function of time. The mean decay rate measured in the living rooms of 43 Southern California homes was 2.80 +/- 1.30 hr-1, with an average ozone deposition velocity of 0.049 +/- 0.017 cm/sec. The experimental protocol was evaluated for precision by repeating measurements in one residence on five different days, collecting 44 same-day replicate measurements, and by simultaneous measurements at two locations in six homes. Measured decay rates were significantly correlated with house type and the number of bedrooms. The observed decay rates were higher in multiple-family homes and homes with fewer than three bedrooms. Homes with higher surface-area-to-volume ratios had higher decay rates. The ratio of indoor-to-outdoor ozone concentrations in homes not using air conditioning and open windows was 68 +/- 18%, while the ratio of indoor-to-outdoor ozone was less than 10% for the homes with air conditioning in use.     

Estimating long-term population exposure to ozone in urban areas of Europe

Tropospheric ozone concentrations regarded as harmful for human health are frequently encountered in Central Europe in summertime. Although ozone formation generally results from precursors transported over long distances, in urban areas local effects, such as reactions due to nearby emission sources, play a major role in determining ozone concentrations. Europe-wide mapping and modeling of population exposure to high ozone concentrations is subject to many uncertainties, because small-scale phenomena in urban areas can significantly change ozone levels from those of the surroundings. Currently the integrated assessment modeling of European ozone control strategies is done utilizing the results of large-scale models intended for estimating the rural background ozone levels. This paper presents an initial study on how much local nitrogen oxide (NOx) concentrations can explain variations between large-scale ozone model results and urban ozone measurements, on one hand, and between urban and nearby rural measurements, on the other. The impact of urban NOx concentrations on ozone levels was derived from chemical equations describing the ozone balance. The study investigated the applicability of the method for improving the accuracy of modeled population exposure, which is needed for efficient control strategy development. The method was tested with NOx and ozone measurements from both urban and rural areas in Switzerland and with the ozone predictions of the large-scale photochemical model currently used in designing Europe-wide control strategies for ground-level ozone. The results suggest that urban NOx levels are a significant explanatory factor in differences between urban and nearby rural ozone concentrations and that the phenomenon could be satisfactorily represented with this kind of method. Further research efforts should comprise testing of the method in more locations and analyzing the performance of more widely applicable ways of deriving the initial parameters.     

Monitoring and modelling of biosphere/atmosphere exchange of gases and aerosols in Europe

Monitoring and modelling of deposition of air pollutants is essential to develop and evaluate policies to abate the effects related to air pollution and to determine the losses of pollutants from the atmosphere. Techniques for monitoring wet deposition fluxes are widely applied. A recent intercomparison experiment, however, showed that the uncertainty in wet deposition is relatively high, up to 40%, apart from the fact that most samplers are biased because of a dry deposition contribution. Wet deposition amounts to about 80% of the total deposition in Europe with a range of 10-90% and uncertainty should therefore be decreased. During recent years the monitoring of dry deposition has become possible. Three sites have been operational for 5 years. The data are useful for model development, but also for model evaluation and monitoring of progress in policy. Data show a decline in SO(2) dry deposition, whereas nitrogen deposition remained constant. Furthermore, surface affinities for pollutants changed leading to changes in deposition. Deposition models have been further developed and tested with dry deposition measurements and total deposition measurements on forests as derived from throughfall data. The comparison is reasonable given the measurement uncertainties. Progress in ozone surface exchange modelling and monitoring shows that stomatal uptake can be quantified with reasonable accuracy, but external surface uptake yields highest uncertainty.     

Modeling the atmospheric transport and deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in North America

The atmospheric fate of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was simulated for the year 2000 in North America using a SMOKE/CMAQ-based chemical transport model that was modified for this purpose. The 1999 USEPA emission inventories of PCDD/Fs and criteria pollutants were used. The 1995 Canadian emission inventory of criteria pollutants and the 1995 Canadian area source emissions for PCDD/Fs were used with the 2000 Canadian point source emissions. Modifications to CMAQ involved coupling it with dual organic matter (OM) absorption and black carbon (BC) adsorption models to calculate PCDD/F gas–particle partitioning. The model satisfactorily reproduced the particle bound fractions at all rural sites for which there were measured data and across the whole domain, the modeled vs. measured differences in particle bound fractions were less than 20% for nearly all congeners. The model predicted ambient air PCDD/F concentrations were also consistent with measurements. Simulated deposition fluxes were within 58% of direct measurements. PCDD/F atmospheric depositions to each of the Great Lakes were estimated for the year 2000. The results indicate that approximately 76% of the total deposition of PCDD/Fs to the Great Lakes (in W-TEQ, or toxic equivalent units as defined by the World Health Organization) is attributed to PCDD/Fs absorbed into OM in aerosol. For all of the lakes, more than 92% of all deposition is particle phase wet deposition and only 5–8% is particle phase dry deposition. Wet deposition from the gas phase is negligible. Of the 17 toxic PCDD/F congeners, the Cl_4–5DD/F compounds contribute approximately 70% to the total atmospheric deposition to the Great Lakes. The seasonal changes in the PCDD/F deposition flux track variations in ambient temperature.     

A model for NOx–O3–terpene chemistry in chamber measurements of plant gas exchange

Cuvette measurements are a tool to analyse CO₂ exchange, transipiration and deposition/emission of different trace gases by plants. To verify these experimental methods and to use them efficiently we have developed a numerical model with atmospheric chemical reactions. The model includes reactions between 54 different chemical species in the gas phase. Using the model we are able to determine optimal size/flow rate ratios and cuvette cycles (closure times) from an experimental point of view. Using the cuvette model with atmospheric chemistry more accurate estimates for emissions/deposition rates of different species can be found. Some chemical reactions are significant, e.g. for NO and terpenes, as regards the analysis and interpretation of measured concentrations. With slower flow rates through a cuvette the significance of reactions is more pronounced. However, there are some species like ozone, where stomatal deposition is a dominant phenomenon and chemistry plays a minor role.     

Wintertime vertical variations in particulate matter (PM) and precursor concentrations in the San Joaquin Valley during the California Regional Coarse PM/Fine PM Air Quality Study

Air quality monitoring was conducted at a rural site with a tower in the middle of California's San Joaquin Valley (SJV) and at elevated sites in the foothills and mountains surrounding the SJV for the California Regional PM10/ PM2.5 Air Quality Study. Measurements at the surface and n a tower at 90 m were collected in Angiola, CA, from December 2000 through February 2001 and included hourly black carbon (BC), particle counts from optical particle counters, nitric oxide, ozone, temperature, relative humidity, wind speed, and direction. Boundary site measurements were made primarily using 24-hr integrated particulate matter (PM) samples. These measurements were used to understand the vertical variations of PM and PM precursors, the effect of stratification in the winter on concentrations and chemistry aloft and at the surface, and the impact of aloft-versus-surface transport on PM concentrations. Vertical variations of concentrations differed among individual species. The stratification may be important to atmospheric chemistry processes, particularly nighttime nitrate formation aloft, because NO2 appeared to be oxidized by ozone in the stratified aloft layer. Additionally, increases in accumulation-mode particle concentrations in the aloft layer during a fine PM (PM2.5) episode corresponded with increases in aloft nitrate, demonstrating the likelihood of an aloft nighttime nitrate formation mechanism. Evidence of local transport at the surface and regional transport aloft was found; transport processes also varied among the species. The distribution of BC appeared to be regional, and BC was often uniformly mixed vertically. Overall, the combination of time-resolved tower and surface measurements provided important insight into PM stratification, formation, and transport.     

An assessment of the impact of California's Phase 2 Reformulated Gasoline on ozone air quality

California's Phase 2 Reformulated Gasoline (CaRFG), introduced early in 1996, represents an important step toward attainment of ozone standards. Studies of vehicle emissions and ambient air quality data have reported substantial reductions of ozone precursors due to CaRFG. This study uses daily measurements of regional ozone and meteorology to estimate the effect of CaRFG on ozone concentrations in three areas of California. In each area, a regression model was used to partially account for the daily effects of meteorology on area-wide ozone maxima for May-October. The statistical models are based on combinations of air temperature aloft (approximately 5000 ft), surface air temperatures, and surface wind speeds. Estimated ozone benefits were attributed to CaRFG after accounting for meteorology, which improved the precision of the estimates by approximately 37-57% based on a resampling analysis. The ozone benefits were calculated as the difference in ozone times the proportion of the reductions of hydrocarbons and nitrogen oxides attributed to CaRFG by the best available emission inventories. Ozone benefits attributed to CaRFG (with approximately 90% confidence) are 8-13% in the Los Angeles area, -2-6% in the San Francisco Bay area overall with greater benefits in two major subregions, and 3-15% in the Sacramento area.     

What is causing high ozone at Summit,Greenland?

Causes for the unusually high and seasonally anomalous ozone concentrations at Summit, Greenland were investigated. Surface data from continuous monitoring, ozone sonde data, tethered balloon vertical profiling data, correlation of ozone with the radionuclide tracers ⁷Be and ²¹⁰Pb, and synoptic transport analysis were used to identify processes that contribute to sources and sinks of ozone at Summit. Northern Hemisphere (NH) lower free troposphere ozone mixing ratios in the polar regions are ∼20 ppbv higher than in Antarctica. Ozone at Summit, which is at 3212 m above sea level, reflects its altitude location in the lower free troposphere. Transport events that bring high ozone and dry air, likely from lower stratospheric/higher tropospheric origin, were observed ∼40% of time during June 2000. Comparison of ozone enhancements with radionuclide tracer records shows a year-round correlation of ozone with the stratospheric tracer ⁷Be. Summit lacks the episodic, sunrise ozone depletion events, which were found to reduce the annual, median ozone at NH coastal sites by up to ∼3 ppbv. Synoptic trajectory analyses indicated that, under selected conditions, Summit encounters polluted continental air with increased ozone from central and western Europe. Low ozone surface deposition fluxes over long distances upwind of Summit reduce ozone deposition losses in comparison to other NH sites, particularly during the summer months. Surface-layer photochemical ozone production does not appear to have a noticeable influence on Summit's ozone levels.     

Atmospheric mercury distribution in Northern Europe and in the Mediterranean region

Mercury species in air have been measured at five sites in Northwest Europe and at five coastal sites in the Mediterranean region during measurements at four seasons. Observed concentrations of total gaseous mercury (TGM), total particulate mercury (TPM) and reactive gaseous mercury (RGM) were generally slightly higher in the Mediterranean region than in Northwest Europe. Incoming clean Atlantic air seems to be enriched in TGM in comparison to air in Scandinavia. Trajectory analysis of events where high concentrations of TPM simultaneously were observed at sites in North Europe indicate source areas in Central Europe and provide evidence of transport of mercury on particles on a regional scale.