Characterization and source presumption of wintertime submicron organic aerosols at Saitama,Japan, using the Aerodyne aerosol mass spectrometer

The chemical composition and size distribution of submicron aerosols were analyzed at a suburban site at Saitama, Japan, in the winter of 2004/2005, using an Aerodyne aerosol mass spectrometer. Although organics and nitrate were the dominant species during the sampling period, a large fraction of sulfate was observed at the accumulation mode when mass loading was low and wind speed was high. The size distributions of m/z 44 (mostly CO₂⁺) and sulfate aerosols during periods of high wind speed showed remarkable similarities in the accumulation mode, indicating that oxygenated organics were aged aerosols and internally mixed with sulfate. Ozone concentrations were also increased during these high wind speed periods although nighttime (e.g., 12/17 2004), indicating that the oxygenated compounds were strongly influenced by transported and aged air masses. The diurnal profiles of ultrafine-mode organics and hydrocarbon-like organic aerosols (HOA) were similar to NO_X derived from traffic and other combustion sources. The temporal variation of oxygenated organic aerosols (OOA) agreed well with that of nitrate as a secondary aerosol tracer, and the diurnal profile of the OOA fraction of organics increased during the day associated with higher UV light intensity. The result of time and size-resolved chemical composition of submicron particles indicated that the OOA is associated with both photochemical activity and transboundary pollution, and ultrafine-mode organic and HOA aerosols are mainly associated with combustion sources.     

The water-soluble ionic composition of PM2.5 in Shanghai and Beijing,China

A year-long field study to characterize the ionic species in PM2.5 was carried out in Shanghai and Beijing, China, in 1999–2000. Weekly samples of PM2.5 were collected using a special low flow rate (0.4 l min⁻¹) sampler. In Shanghai, SO₄²⁻ NO₃⁻ and NH₄⁺ were the dominant ionic species, which accounted for 46%, 18% and 17% of the total mass of ions, respectively. Local SO₂ emissions were an important source of SO₄²⁻ in PM2.5 because the SO₄²⁻ concentration was correlated with the SO₂ concentration (r=0.66). The relatively stable SO₄²⁻/SO₂ mass ratio over a large range of temperatures suggests that gas-phase oxidation of SO₂ played a minor role in the formation of SO₄²⁻. The sum of SO₄²⁻ and NO₃⁻ was highly correlated with NH₄⁺ (r=0.96), but insufficient ammonium was present to totally neutralize the aerosol. In Beijing, SO₄²⁻, NO₃⁻ and NH₄⁺ were also the dominant ionic species, constituting 44%, 25% and 16% of the total mass of water-soluble ions, respectively. Local SO₂ emissions were an important source of SO₄²⁻ in the winter since SO₄²⁻ was correlated with SO₂ (r=0.83). The low-mass SO₄²⁻/SO₂ ratio (0.27) during winter, which had low humidity, suggests that gas-phase oxidation of SO₂ was a major route of sulfate formation. In the summer, however, much higher mass ratios of SO₄²⁻/SO₂ (5.6) were observed and were ascribed to in-cloud sulfate formation. The annual average ratio of NO₃⁻/SO₄²⁻ was 0.4 and 0.6 in Shanghai and in Beijing, respectively, suggesting that stationary emissions were still a dominant source in these two cities.     

Transport of SO2 and aerosol over the Yellow sea

Aircraft measurements of air pollutants were made to investigate the characteristic features of long-range transport of sulfur compounds over the Yellow Sea for the periods of 26–27 April and 7–10 November in 1998, and 9–11 April and 19 June in 1999, together with aerosol measurements at the Taean background station in Korea. The overall mean concentrations of SO₂, O₃ and aerosol number in the boundary layer for the observation period ranged 0.1–7.4 ppb 32.1–64.1 ppb and 1.0–143.6 cm⁻³, respectively. It was found that the air mass over the Yellow Sea had a character of both the polluted continental air and clean background air, and the sulfur transport was mainly confined in the atmospheric boundary layer. The median of SO₂ concentration within the boundary layer was about 0.1–2.2 ppb. However, on 8 November, 1998, the mean concentrations of SO₂ and aerosol number increased up to 7.4 ppb and 109.5 cm⁻³, respectively, in the boundary layer, whereas O₃ concentration decreased remarkably. This enhanced SO₂ concentration occurred in low level westerly air stream from China to Korea. Aerosol analyses at the downstream site of Taean in Korea showed 2–3 times higher sulfate concentration than that of other sampling days, indicating a significant amount of SO₂ conversion to non sea-salt sulfate during the long-range transport.     

NH4+, NO3−, and SO42− in roadside and rural size-resolved particles and transformation of NO2/SO2 to nanoparticle-bound NO3−/SO42−

This study investigates ammonium, nitrate, and sulfate (NH₄⁺, NO₃^?, and SO₄^2?) in size-resolved particles (particularly nano (PM_0.01–0.056)/ultrafine (PM_0.01–0.1)) and NO_x/SO₂ collected near a busy road and at a rural site. The average (mass) cumulative fraction of secondary inorganic aerosols (SO₄^2?+NO₃^?+NH₄⁺) in nano or ultrafine particles at the roadside was found to be three to four times that at the rural site. The above three secondary inorganic aerosol species were present in similar cumulative fractions in particles of size 1–18 μm at both sites; however, dissimilar fractions were observed for Cl^?, Na⁺, and K⁺. The nitrogen ratios (NRs: NR = NO₃^??N/(NO₃^??N + NO₂–N)), sulfur ratios (SRs: SR = SO₄^2??S/(SO₄^2??S + SO₂–S)), dNR/D_P (derivative of NR with respect to D_P (particle diameter)), and dSR/D_P (derivative of SR with respect to D_P) at the roadside were higher than those at the rural site for nano/ultrafine particles. At both sites (particularly the roadside), the nanoparticles had significantly higher dNR/D_P and dSR/D_P values than differently sized particles, implying that NO₃^?/SO₄^2? (from NO₂/SO₂ transformation or NO₃^?/SO₄^2? deposition) were present on these particles.     

Formation of particulate sulfur species (sulfate and methanesulfonate) during summer over the Eastern Mediterranean: A modelling approach

To improve our understanding of the mechanisms of particulate sulfur formation (non sea-salt sulfate, nss-SO₄²⁻) and methanesulfonate (MS_x used here to represent the sum of gaseous methanesulfonic acid, MSA, and particulate methanesulfonate, MS⁻) in the eastern Mediterranean and to evaluate the relative contribution of biogenic and anthropogenic sources to the S budget, a chemical box model coupled offline with an aerosol–cloud model has been used.Based on the measurements of gaseous dimethyl sulfide (DMS) and methanesulfonic acid (MSA) and the MSA sticking coefficient determined during the Mediterranean Intensive Oxidant Study (MINOS) experiment, the yield of gaseous MSA from the OH-initiated oxidation of DMS was calculated to be about 0.3%. Consequently, MSA production from gas-phase oxidation of DMS is too small to explain the observed levels of MS⁻. On the other hand, heterogeneous reactions of dimethyl sulfoxide (DMSO) and its gas-phase oxidation product methanesulfinic acid (MSIA) can account for most of the observed MS⁻ levels. The modelling results indicate that about 80% of the production of MS⁻ can be attributed to heterogeneous reactions.Observed submicron nss-SO₄²⁻ levels can be fully explained by homogeneous (photochemical) gas-phase oxidation of sulfur dioxide (SO₂) to sulfuric acid (H₂SO₄), which is subsequently scavenged by (mainly submicron) aerosol particles. The predominant oxidant during daytime is hydroxyl radical (OH) showing very high peak levels in the area during summer mostly under cloudless conditions. Therefore, during summer in the east Mediterranean, heterogeneous sulfate production appears to be negligible. This result is of particular interest for sulfur abatement strategy. On the other hand only about 10% of the supermicron nss-SO₄²⁻ can be explained by condensation of gas-phase H₂SO₄, the rest must be formed via heterogeneous pathways.Marine biogenic sulfur emissions contribute up to 20% to the total oxidized sulfur production (SO₂ and H₂SO₄) in good agreement with earlier estimates for the area.     

Aerosol formation yields from the reaction of catechol with ozone

The formation of secondary organic aerosol from the gas-phase reaction of catechol (1,2-dihydroxybenzene) with ozone has been studied in two smog chambers. Aerosol production was monitored using a scanning mobility particle sizer and loss of the precursor was determined by gas chromatography and infrared spectroscopy, whilst ozone concentrations were measured using a UV photometric analyzer. The overall organic aerosol yield (Y) was determined as the ratio of the suspended aerosol mass corrected for wall losses (M_o) to the total reacted catechol concentrations, assuming a particle density of 1.4 g cm^?3. Analysis of the data clearly shows that Y is a strong function of M_o and that secondary organic aerosol formation can be expressed by a one-product gas–particle partitioning absorption model. The aerosol formation is affected by the initial catechol concentration, which leads to aerosol yields ranging from 17% to 86%. The results of this work are compared to similar studies reported in the literature.     

The physical characteristics of sulfur aerosols

A review of the physical characteristics of sulfur-containing aerosols, with respect to size distribution of the physical distributions, sulfur distributions, distribution modal characteristics, nuclei formation rates, aerosol growth characteristics, and in situ measurement, has been made.Physical size distributions can be characterized well by a trimodal model consisting of three additive lognormal distributions.When atmospheric physical aerosol size distributions are characterized by the trimodal model, the following typical modal parameters are observed:1. Nuclei mode – geometric mean size by volume, DGV_n, from 0.015 to 0.04 μm. σ_gn=1.6, nucler mode volumes from 0.0005 over the remote oceans to 9 μm³ cm⁻³ on an urban freeway.2. Accumulation mode – geometric mean size by volume, DGV_a, from 0.15 to 0.5 μm, σ_ga=1.6–2.2 and mode volume concentrations from 1 for very clean marine or continental backgrounds to as high as 300 μm³ cm⁻³ under very polluted conditions in urban areas.3. Coarse particle mode – geometric mean size by volume, DGV_c, from 5 to 30 μm, σ_gn=2–3, and mode volume concentrations from 2 to 1000 μm³ cm⁻³.It has also been concluded that the fine particles (D_p<2 μm) are essentially independent in formation, transformation and removal from the coarse particles (D_p>2 μm).Modal characterization of impactor-measured sulfate size distributions from the literature shows that the sulfate is nearly all in the accumulation mode and has the same size distribution as the physical accumulation mode distribution.Average sulfate aerodynamic geometric mean dia. was found to be 0.48±0.1 μm (0.37±0.1 μm vol. dia.) and σ_g=2.00±0.29. Concentrations range from a low of about 0.04 μg m⁻³ over the remote oceans to over 8 μg m⁻³ under polluted conditions over the continents.Review of the data on nucleation in smog chambers and in the atmosphere suggests that when SO₂, is present, SO₂-to-aerosol conversion dominates the Aitken nuclei count and, indirectly, through coagulation and condensation, the accumulation mode size and concentration. There are indications that nucleation is ubiquitous in the atmosphere, ranging from values as low as 2 cm⁻³ h⁻¹ over the clean remote oceans to a high of 6×10⁶ cm⁻³ h⁻¹ in a power plant plume under sunny conditions.There is considerable theoretical and experimental evidence that even if most of the mass for the condensational growth of the accumulation mode comes from hydrocarbon conversion, sulfur conversion provides most of the nuclei.     

Mineral aerosols from western India: Temporal variability of coarse and fine atmospheric dust and elemental characteristics

Size-segregated aerosol samples (PM_2.5 and PM₁₀) were collected during Jan–Dec-2007 from a high-altitude site located in a semi-arid region (Mt. Abu, 24.6 °N, 72.7 °E, 1680 m asl) in order to asses the temporal variability in the abundance of atmospheric mineral dust and its elemental composition over western India. The mass concentrations of fine (PM_2.5) and coarse (PM_10–2.5) mode aerosols varied from 1.6 to 46.1 and 2.3 to 102 μg m^?3 respectively over the annual seasonal cycle; with dominant and uniform contribution of mineral dust (60–80%) in the coarse mode relative to large temporal variability (11–75%) observed in the fine mode. The coarse mass fraction shows a characteristic increase with the wind speed during summer months (Mar to Jun); whereas fine aerosol mass and its elemental composition exhibit conspicuous temporal pattern associated with north-easterlies during wintertime (Oct–Feb). The Fe/Al weight ratio in PM_2.5 ranges from 0.5 to 1.0 during winter months. The relative enrichment of Fe in fine mode, compared to the crustal ratio of 0.44, is attributed to the down-wind advective transport of combustion products derived from large-scale biomass burning, industrial and automobile emission sources located in the Indo-Gangetic Plain (northern India). In contrast, Ca/Al and Mg/Al weight ratios show relative enrichment of Ca and Mg in the coarse mode; indicating their dominant contribution from carbonate minerals. This has implication to efficient neutralization of atmospheric acidic species (SO₄^2? and NO₃^?) by mineral dust over western India.     

Elevated biogenic sulphur dioxide concentrations over the North Atlantic

Elevated biogenic SO₂ from the oxidation of dimethylsulphide (DMS) in the marine atmosphere was measured over the North Atlantic Ocean in spring and summer 2003. Stable isotope apportionment was used to distinguish between anthropogenic and biogenic SO₂ in the marine atmosphere south of Greenland. Atmospheric DMS measurements were within range of previous studies. Biogenic SO₂ concentrations were as high as 82 nmol m^?3 (spring geometric mean: 4 nmol m^?3, σ = 17; summer geometric mean 7 nmol m^?3, σ = 19) and are the highest reported values for marine biogenic SO₂ in the literature. Elevated biogenic SO₂ was found in air masses influenced by anthropogenic pollutants during the summer. This indicates that anthropogenic pollutants may affect the fate of oceanic emissions of sulphur compounds in the atmosphere favoring the formation of cloud condensation nuclei.     

Observations and modelling of aerosol growth in marine stratocumulus—case study

Airborne measurements of the growth of the marine accumulation mode after multiple cycles through stratocumulus cloud are presented. The nss-sulphate cloud residual mode was log-normal in spectral shape and it’s mode radius was observed to progressively increase in size from 0.78 to 0.94 μm over 155 min of air parcel evolution through the cloudy marine boundary layer. The primary reason for this observed growth was thought to result from aqueous phase oxidation of SO₂ to aerosol sulphate in activated cloud drops. An aqueous phase aerosol–cloud-chemistry model was used to simulate this case study of aerosol growth and was able to closely reproduce the observed growth. The model simulations illustrate that aqueous phase oxidation of SO₂ in cloud droplets was able to provide enough additional sulphate mass to increase the size of activated aerosol. During a typical cloud cycle simulation, ≈4.6 nmoles kg^-1_air (0.44 μg m^-3) of sulphate mass was produced with ≈70% of sulphate production occurring in cloud droplets activated upon sea-salt nuclei and ≈30% occurring upon nss-sulphate nuclei, even though sea-salt nuclei contributed less than 15% to the activated droplet population. The high fraction of nss-sulphate mass internally mixed with sea-salt aerosol suggests that aqueous phase oxidation of SO₂ in cloud droplets activated upon sea-salt nuclei is the dominant nss-sulphate formation mechanism and that sea-salt aerosol provides the primary chemical sink for SO₂ in the cloudy marine boundary layer.     

Sources,distribution, and acidity of sulfate–ammonium aerosol in the Arctic in winter–spring

We use GEOS-Chem chemical transport model simulations of sulfate–ammonium aerosol data from the NASA ARCTAS and NOAA ARCPAC aircraft campaigns in the North American Arctic in April 2008, together with longer-term data from surface sites, to better understand aerosol sources in the Arctic in winter–spring and the implications for aerosol acidity. Arctic pollution is dominated by transport from mid-latitudes, and we test the relevant ammonia and sulfur dioxide emission inventories in the model by comparison with wet deposition flux data over the source continents. We find that a complicated mix of natural and anthropogenic sources with different vertical signatures is responsible for sulfate concentrations in the Arctic. East Asian pollution influence is weak in winter but becomes important in spring through transport in the free troposphere. European influence is important at all altitudes but never dominant. West Asia (non-Arctic Russia and Kazakhstan) is the largest contributor to Arctic sulfate in surface air in winter, reflecting a southward extension of the Arctic front over that region. Ammonium in Arctic spring mostly originates from anthropogenic sources in East Asia and Europe, with added contribution from boreal fires, resulting in a more neutralized aerosol in the free troposphere than at the surface. The ARCTAS and ARCPAC data indicate a median aerosol neutralization fraction [NH₄⁺]/(2[SO₄^2?] + [NO₃^?]) of 0.5 mol mol^?1 below 2 km and 0.7 mol mol^?1 above. We find that East Asian and European aerosol transported to the Arctic is mostly neutralized, whereas West Asian and North American aerosol is highly acidic. Growth of sulfur emissions in West Asia may be responsible for the observed increase in aerosol acidity at Barrow over the past decade. As global sulfur emissions decline over the next decades, increasing aerosol neutralization in the Arctic is expected, potentially accelerating Arctic warming through indirect radiative forcing and feedbacks.     

Secondary organic aerosol formation from the oxidation of aromatic hydrocarbons in the presence of dry submicron ammonium sulfate aerosol

A laboratory study was conducted to examine formation of secondary organic aerosols. A smog chamber system was developed for studying gas–aerosol interactions in a dynamic flow reactor. These experiments were conducted to investigate the fate of gas and aerosol phase compounds generated from hydrocarbon–nitrogen oxide (HC/NO_x) mixtures irradiated in the presence of fine (<2.5 μm) particulate matter. The goal was to determine to what extent photochemical oxidation products of aromatic hydrocarbons contribute to secondary organic aerosol formation through uptake on pre-existing inorganic aerosols in the absence of liquid water films. Irradiations were conducted with toluene, p-xylene, and 1,3,5-trimethylbenzene in the presence of NO_x and ammonium sulfate aerosol, with propylene added to enhance the production of radicals in the system. The secondary organic aerosol yields were determined by dividing the mass concentration of organic fraction of the aerosol collected on quartz filters by the mass concentration of the aromatic hydrocarbon removed by reaction. The mass concentration of the organic fraction was obtained by multiplying the measured organic carbon concentration by 2.0, a correction factor that takes into account the presence of hydrogen, nitrogen, and oxygen atoms in the organic species. The mass concentrations of ammonium, nitrate, and sulfate concentrations as well as the total mass of the aerosols were measured. A reasonable mass balance was found for each of the aerosols. The largest secondary organic aerosol yield of 1.59±0.40% was found for toluene at an organic aerosol concentration of 8.2 μm⁻³, followed by 1.09±0.27% for p-xylene at 6.4 μg m⁻³, and 0.41±0.10% for 1,3,5-trimethylbenzene at 2.0 μg m⁻³. In general, these results agree with those reported by Odum et al. and appear to be consistent with the gas–aerosol partitioning theory developed by Pankow. The presence of organic in the aerosol did not affect significantly the hygroscopic properties of the aerosol.     

Quantifying the sources of hazardous elements of suspended particulate matter aerosol collected in Yokohama,Japan

We analyzed metals (Mg, Al, Ca, V, Cr, Mn, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, Cs, Ba, Pb and Bi), water-soluble ions (Na⁺, NH₄⁺, K⁺, Ca²⁺, Cl^?, NO₃^? and SO₄^2?) and carbonaceous mass (EC and OC) in SPM aerosol samples using an ICP-MS, ion chromatograph and CHN corder, respectively. The SPM samples were collected from 1999 to 2005 at two locations (urban site A and industrial site B) of Yokohama, Japan with concentrations in mean and ranges of 34.2 and 19.7–50.3 μg m^?3 and 22.9 and 12.7–35.1 μg m^?3 for the respective location. Source apportionment of SPM aerosol was conducted appropriately for the first time to these locations employing PCA-APCS technique. Major sources of SPM at site A were a) crustal source, b) urban origin, c) undefined, and d) mineral rock. At site B, the sources were predicted as a) urban origin, b) undefined, c) crustal source, and d) secondarily formed aerosol. The tracers and nature of the source related to urban origin at both sites were similar but retaining different source strength. Secondarily formed aerosol was quite unique at site B. However, mineral rock was remarkable at site A.     

Aerosol speciation and mass prediction from toluene oxidation under high NOx conditions

A kinetically based gas-particle partitioning box model is used to highlight the importance of parameter representation in the prediction of secondary organic aerosol (SOA) formation following the photo-oxidation of toluene. The model is initialized using experimental data from York University's indoor smog chamber and provides a prediction of the total aerosol yield and speciation. A series of model sensitivity experiments were performed to study the aerosol speciation and mass prediction under high NO_x conditions (VOC/NO_x = 0.2). Sensitivity experiments indicate vapour pressure estimation to be a large area of weakness in predicting aerosol mass, creating an average total error range of 70 μg m^?3 (range of 5–145 μg m^?3), using two different estimation methods. Aerosol speciation proved relatively insensitive to changes in vapour pressure. One species, 3-methyl-6-nitro-catechol, dominated the aerosol phase regardless of the vapour pressure parameterization used and comprised 73–88% of the aerosol by mass. The dominance is associated with the large concentration of 3-methyl-6-nitro-catechol in the gas-phase. The high NO_x initial conditions of this study suggests that the predominance of 3-methyl-6-nitro-catechol likely results from the cresol-forming branch in the Master Chemical Mechanism taking a significant role in secondary organic aerosol formation under high NO_x conditions. Further research into the yields and speciation leading to this reaction product is recommended.     

Impact of clouds and aerosols on ozone production in Southeast Texas

A radiative transfer model and photochemical box model are used to examine the effects of clouds and aerosols on actinic flux and photolysis rates, and the impacts of changes in photolysis rates on ozone production and destruction rates in a polluted urban environment like Houston, Texas. During the TexAQS-II Radical and Aerosol Measurement Project the combined cloud and aerosol effects reduced j(NO₂) photolysis frequencies by nominally 17%, while aerosols reduced j(NO₂) by 3% on six clear sky days. Reductions in actinic flux due to attenuation by clouds and aerosols correspond to reduced net ozone formation rates with a nearly one-to-one relationship. The overall reduction in the net ozone production rate due to reductions in photolysis rates by clouds and aerosols was approximately 8 ppbv h^?1.     

Kinetics of the tropospheric formaldehyde loss onto mineral dust and urban surfaces

The kinetics of the heterogeneous reaction between gaseous HCHO and TiO₂/SiO₂ mineral coatings were investigated using a coated-wall flow tube to mimic HCHO loss on mineral aerosol and TiO₂ coated depolluting urban surfaces. The measured uptake kinetics were strongly enhanced when the flow tube was irradiated with 340–420 nm UV light with an irradiance of 1.45 mW cm^?2. The associated BET uptake coefficients ranged from (3.00 ± 0.45) × 10^?9 to (2.26 ± 0.34) × 10^?6 and were strongly dependent on HCHO initial concentration, relative humidity, temperature, and TiO₂ content in the mineral coating, which ranged from 3.5 to 32.5 ppbv, 6–70%, 278–303 K, and 1–100 %wt, respectively. The measured kinetics were well described using a Langmuir–Hinshelwood type formalism. The estimated uptake coefficients were used to discuss the importance of heterogeneous HCHO surface loss, in terms of deposition lifetimes, as compared to major homogeneous gas-phase losses such as OH reaction and photolysis. It is found that deposition may compete with gas-phase removal of HCHO in a dense urban environment if more than 10% of the urban surface is covered with TiO₂ treated material.     

On the oxidation of SO2 to sulfate in atmospheric aerosols

This paper presents the results of a study to investigate the atmospheric oxidation of sulfur dioxide (SO₂). A detailed model of gas-phase chemistry, aerosol thermodynamics and aerosol chemistry is employed to simulate atmospheric sulfate formation. The calculations indicate that, in addition to the gasphase oxidation by hydroxyl (OH) radicals, SO₂ oxidation in aqueous aerosols may also contribute significantly to sulfate formation. Reactions of SO₂ with hydrogen peroxide (H₂O₂) and O₂ (catalyzed by Fe³⁺ and Mn²⁺) are identified as principal aqueous-phase oxidation mechanisms. The results of this study confirm the conclusions drawn from the analysis of ambient aerosol data qualitatively. However, some discrepancies also exist between the results of our modeling study and field data. Such discrepancies emphasize the need for the collection of ambient data for a more rigorous and quantitative evaluation of atmospheric aerosol models.     

Atmospheric concentrations of ammonia and ammonium at an agricultural site in the southeast United States

In this study, we present ∼1 yr (October 1998–September 1999) of 12-hour mean ammonia (NH₃), ammonium (NH₄⁺), hydrochloric acid (HCl), chloride (Cl⁻), nitrate (NO₃⁻), nitric acid (HNO₃), nitrous acid (HONO), sulfate (SO₄²⁻), and sulfur dioxide (SO₂) concentrations measured at an agricultural site in North Carolina's Coastal Plain region. Mean gas concentrations were 0.46, 1.21, 0.54, 5.55, and 4.15 μg m⁻³ for HCl, HNO₃, HONO, NH₃, and SO₂, respectively. Mean aerosol concentrations were 1.44, 1.23, 0.08, and 3.37 μg m⁻³ for NH₄⁺, NO₃⁻, Cl⁻, and SO₄²⁻, respectively. Ammonia, NH₄⁺, HNO₃, and SO₄²⁻ exhibit higher concentrations during the summer, while higher SO₂ concentrations occur during winter. A meteorology-based multivariate regression model using temperature, wind speed, and wind direction explains 76% of the variation in 12-hour mean NH₃ concentrations (n=601). Ammonia concentration increases exponentially with temperature, which explains the majority of variation (54%) in 12-hour mean NH₃ concentrations. Dependence of NH₃ concentration on wind direction suggests a local source influence. Ammonia accounts for >70% of NH_x (NH_x=NH₃+NH₄⁺) during all seasons. Ammonium nitrate and sulfate aerosol formation does not appear to be NH₃ limited. Sulfate is primarily associated ammonium sulfate, rather than bisulfate, except during the winter when the ratio of NO₃⁻–NH₄⁺ is ∼0.66. The annual average NO₃⁻–NH₄⁺ ratio is ∼0.25.     

Quantitative chemical composition and characteristics of aerosols over western India: One-year record of temporal variability

One-year quantitative chemical data set consisting of water-soluble constituents (NH₄⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^?, NO₃^?, SO₄^2? and HCO₃^?), crustal and trace elements (Al, Fe, Ca, Mg, K, Mn, Zn, Pb) and carbonaceous species (OC, EC) in ambient aerosols, collected over an urban site located in a high-dust semi-arid region of western India, reveals excellent linear relationship (r² = 0.92; slope = 0.96 ± 0.05) between gravimetrically assessed TSP (total suspended particulates) and chemically analyzed aerosol mass. The TSP abundance ranging from 60 to 250 μg m^?3, over a period of 12 months (January–December), is dominated by mineral dust (～70%); whereas contribution from sea-salts, anthropogenic and carbonaceous species exhibits significant temporal variability depending upon the wind regimes. The mineral dust is enriched in Ca, Mg and Fe with respect to upper continental crust (UCC); whereas Zn and Pb exhibit a characteristic anthropogenic source and high enrichment factors. The carbonaceous species show significant seasonality; with dominance of OC (range: 4.6–28 μg m^?3; average: 12.8 μg m^?3; SD: 6.8) and minor contribution from EC (range: 0.3–4.4 μg m^?3; average: 2.4 μg m^?3; SD: 1.4). The observed concentrations are significantly lower than those reported for the metro cities in South Asia but the OC/EC ratios (range: 4.3–35; average: 8.3; SD: 5.7) are significantly higher than the characteristic ratio (～2–4) reported for the urban atmosphere. Such quantitative chemical characterization of aerosols is essential in assessing their role in atmospheric chemistry and climate change. This study could also be useful in understanding the physical and optical aerosol properties documented from the same site and thus, in validating regional climate models.     

Size-resolved sulfate and ammonium measurements in marine boundary layer over the North and South Pacific

Marine background levels of non-sea-salt- (nss-) SO₄²⁻ (5.0–9.7 neq m⁻³), NH₄⁺ (2.1–4.4 neq m⁻³) and elemental carbon (EC) (40–80 ngC m⁻³) in aerosol samples were measured over the equatorial and South Pacific during a cruise by the R/V Hakuho-maru from November 2001 to March 2002. High concentrations of nss-SO₄²⁻ (47–94 neq m⁻³), NH₄⁺ (35–94 neq m⁻³) and EC (130–460 ngC m⁻³) were found in the western North Pacific near the coast of the Asian continent under the influence of the Asian winter monsoon. Particle size distributions of ionic components showed that the equivalent concentrations of nss-SO₄²⁻ were balanced with those of NH₄⁺ in the size range of 0.06<D<0.22 μm, whereas the concentration ratios of NH₄⁺ to nss-SO₄²⁻ in the size range of D>0.22 μm were decreased with increase in particle size. We estimated the source contributions of those aerosol components in the marine background air over the equatorial and South Pacific. Biomass burning accounted for the large fraction (80–98% in weight) of EC and the minor fraction (2–4% in weight) of nss-SO₄²⁻. Marine biogenic source accounted for several tens percents of NH₄⁺ and nss-SO₄²⁻. In the accumulation mode, 70% of particle number existed in the size range of 0.1<D<0.2 μm. In the size rage of 0.06<D<0.22 μm, the dominant aerosol component of (NH₄)₂SO₄ would be mainly derived from the marine biogenic sources.