Production of OH radicals from the reactions of C4–C6 internal alkenes and styrenes with ozone in the gas phase

OH formation from the ozonolysis reactions of seven internal alkenes with 4–6 carbons, styrene, trans-β-methyl styrene, and α-methyl styrene was studied using complementary techniques. A small-ratio relative-rate technique in which small quantities of OH tracers are added to monitor OH formation yields provided the following results: trans-2-butene, 0.64±0.12; cis-2-butene, 0.33±0.05; trans-2-pentene, 0.46±0.08; cis-2-pentene, 0.29±0.06; trans-3-hexene, 0.53±0.08; cis-3-hexene, 0.36±0.07; and 2-methyl-2-butene, 0.98±0.24. For styrene, trans-β-methyl styrene, and α-methyl styrene, OH yields of 0.07±0.04, 0.22±0.09, and 0.23±0.12 were measured, respectively. A second method, which monitors product formation from the OH reaction with 2-butanol was used to derive OH formation yields from 2,3-dimethyl-2-butene, 2-methyl-2-butene and cis-2-pentene, and provided yields of 0.91±0.14, 0.80±0.12, and 0.27±0.07, respectively. The results are briefly discussed in terms of the relationship between structures of these alkenes and OH formation.     

Photocatalytic degradation of chlorophenols in soil washing wastes containing Brij 35. Correlation between the degradation kinetics and the pollutants–micelle binding

The photocatalytic degradations of 4-chlorophenol (CP), 4-chloro-2-methylphenol (CMP), 4-chloro-3,5-dimethylphenol (CDMP) and 4-chloro-2-isopropyl-5-methylphenol (CIMP) were investigated in water and in simulated soil washing wastes containing Brij 35 (polyoxyethylene(23)dodecyl ether) in the presence of TiO₂ dispersions. A neat inhibition of substrate decomposition proportional to their growing hydrophobicity was observed in the washing wastes for CP, CMP and CDMP, whereas CIMP showed a different behaviour. The mineralization of the organic chlorine of CP and CIMP was relatively fast and complete, whereas it was much slower for CMP and CDMP. Micellar solubilization and substrate adsorption onto the semiconductor play opposite roles on the degradation kinetics, and a breakpoint between the corresponding induced effects was evidenced when the pollutants become completely bound to the micellar aggregates.     

The seasonal cycles and photochemistry of C2–C5 alkanes at Mace Head

Continuous in-situ measurements of NMHCs at Mace Head, Ireland during two full annual cycles from January 2005 to January 2007 were used to investigate NMHC emission sources and transport including dilution and photochemical oxidation. The Mace Head research station is ideally located to sample a wide range of air masses including polluted European transport, clean North Atlantic and Arctic air masses and the ultra-clean, Southern Atlantic air masses. The variety in air mass sampling is used to investigate interaction of emissions, transport, dilution and photochemistry. Variability of long-lived hydrocarbon ratios is used to assess and estimate typical transport times from emission source to the Mace Head receptor. Seasonality in the ratios of isomeric alkane pairs (for butane and pentanes) are used to assess the effects of atmospheric transport and photochemical ageing. Finally, the natural logarithms of NMHC ratios are used to assess photochemical oxidation.     

Photocatalytic degradation of N-heterocyclic aromatics—effects of number and position of nitrogen atoms in the ring

This study demonstrates the influences of position, number of nitrogen (N) atoms and –C–N– or –N=N– linkage present in the six membered heterocyclic compounds such as pyridine, pyrazine, and pyridazine on their photocatalytic degradation by Au, Ag, and Fe⁺² deposited TiO₂ photocatalyst. The photodegradation rate of these heterocyclic compounds follow the order pyridine > pyrazine > pyridazine due to the different extent of hydroxylation and difference in position and number of N atoms in the aromatic moiety. The Au photodeposition significantly improved the TiO₂ photoactivity as compared to Ag and Fe⁺² loading. The presence of two N atoms in pyrazine and pyridazine as compared to one N atom in pyridine hamper the nucleophilc attack of OH radicals in comparison to easy hydroxylation of pyridine ring. There is 1 N atom, 4C–C, 1C–N and 1C=N bond in pyridine, 2 N atoms in the 1 and 4 positions, 2C–C, 2C–N bonds and 2C=N bonds in pyrazine, and pyridazine ring contains 2 N atoms in the 1 and 2 positions, 3C–C, 1N–N bond and 2C=N bonds. The bond strength/energy decreases gradually as: C=N– (615 KJ/mol)?>?–N=N– (418 KJ/mol)?>?–C–C– (347 KJ/mol)?>?–C–N– (305 KJ/mol)?>?–N–N– (163 KJ/mol). As pyridine has 1C–N, 1C=N, and no N–N bond, it photodegrades easily as compared to 1 N–N and 2C=N bonds of pyridazine of lowest photodecomposition rate. The improved photoactivity of Au–TiO₂ is explained on the basis of its favorable redox potential, work function, and electron-capturing capacity, etc.     

C2–C5 Hydrocarbon measurements in the Netherlands 1981–1991

Measurements of C₂–C₅ hydrocarbons on an hourly basis at the TNO site in Delft from 1982 to 1984 and at Moerdijk over the period 1981–1991 are presented. In combination with meteorological data (wind direction and wind speed) the Delft and Moerdijk series are evaluated to identify source categories, annual variations, background concentrations and trends. The C₂–C₅ hydrocarbon concentrations at Delft and Moerdijk are determined mainly by emission characteristics and meteorological dispersion; the dominant sources are relatively nearby and atmospheric degradation is not of much importance. Under conditions of high wind speed the concentrations measured at Moerdijk in the marine sector are close to the Atlantic background concentrations in winter and somewhat above this in summer. The continental background concentrations are higher than the marine background concentrations by a factor of almost two. The annual variation of acetylene is more pronounced than that of the other hydrocarbons, most likely due to a different seasonal variation in acetylene emissions. The annual variation of propene is smoother, indicating stronger sources in summer than in winter. This feature of propene is observed in continental as well as in marine sectors. The observations show that at Moerdijk C₂–C₄ concentrations measured in Rijnmond sector have decreased considerably since the early 1980s, corresponding with changes in emissions in that area. Averaged over all wind directions the trend of all species is downward, but for acetylene the trend is significant at a 95% confidence interval. The acetylene concentrations show an annual downward trend of 3% during the 1980s, supporting other estimates of decreasing hydrocarbon emissions from traffic over this period at the same rate.     

Thermal degradation of hexachlorobenzene in the presence of calcium oxide at 340–400 °C

Hexachlorobenzene (HCB) in the milligram range was co-heated with calcium oxide (CaO) powder in sealed glass ampoules at 340–400 °C. The heated samples were characterized and analyzed by Raman spectroscopy, elemental analysis, gas chromatography/mass spectrometry, ion chromatography, and thermal/optical carbon analysis. The degradation products of HCB were studied at different temperatures and heated times. The amorphous carbon was firstly quantitatively evaluated and was thought to be important fate of the C element of HCB. The yield of amorphous carbon in products increased with heating time, for samples treated for 8 h at 340, 380 °C and 400 °C, the value were 17.5%, 34.8% and 50.2%, respectively. After identification of the dechlorination products, the HCB degradation on CaO at 340–400 °C was supposed to through dechlorination/polymerization pathway, which is induced by electron transfer, generate chloride ions and form high-molecular weight intermediates with significant levels of both hydrogen and chlorine, and finally form amorphous carbon. Higher temperature was beneficial for the dechlorination/polymerization efficiency. The results are helpful for clarifying the reaction mechanism for thermal degradation of chlorinated aromatics in alkaline matrices.     

Photocatalytic degradation of acetaminophen and caffeine using magnetite–hematite combined nanoparticles: kinetics and mechanisms

Environmental Science and Pollution Research - The increased use of pharmaceutical and personal care products (PPCPs) has contributed to the contamination of water systems and put pressure on the...     

The concentrations of specific C2–C6 hydrocarbons in the air of NW England

Ambient air concentrations of specific C₂–C₆ hydrocarbons (HCs) are reported for various days during the summer months of 1983. The samples are classified as either urban, rural or polluted rural according to the sampling site, meteorological conditions and ozone levels. Generally, both the concentrations and HC/acetylene ratios are similar to those reported by other workers for comparable sites. The alkane/alkene ratio at the rural site exceeded that for the urban site and it is concluded that the major contribution to HCs at the former site is advection from distant sources. It appears that the main source of propane in rural areas is natural gas, with about 4.5–9 ppbC unaccounted for by this source.     

Comparison of micrometeorological and two-film estimates of air–water gas exchange for alpha-hexachlorocyclohexane in the Canadian archipelago

The air-sea gas exchange of alpha-hexachlorocyclohexane (α-HCH) in the Canadian Arctic was estimated using a micrometeorological approach and the commonly used Whitman two-film model. Concurrent shipboard measurements of α-HCH in air at two heights (1 and 15 m) and in surface seawater were conducted during the Circumpolar Flaw Lead study in 2008. Sampling was carried out during eight events in the early summer time when open water was encountered. The micrometeorological technique employed the vertical gradient in air concentration and the wind speed to estimate the flux; results were corrected for atmospheric stability using the Monin-Obukhov stability parameter. The Whitman two-film model used the concentrations of α-HCH in surface seawater, in bulk air at 1 and 15 m above the surface, and the Henry's law constant adjusted for temperature and salinity to derive the flux. Both approaches showed that the overall net flux of α-HCH was from water to air. Mean fluxes calculated using the micrometeorological technique ranged from -3.5 to 18 ng m(-2) day(-1) (mean 7.4), compared to 3.5 to 14 ng m(-2) day(-1) (mean 7.5) using the Whitman two-film model. Flux estimates for individual events agreed in direction and within a factor of two in magnitude for six of eight events. For two events, fluxes estimated by micrometeorology were zero or negative, while fluxes estimated with the two-film model were positive, and the reasons for these discrepancies are unclear. Improvements are needed to shorten air sampling times to ensure that stationarity of meteorological conditions is not compromised over the measurement periods. The micrometeorological technique could be particularly useful to estimate fluxes of organic chemicals over water in situations where no water samples are available.     

Seasonal variations of particle-associated nitrosamines by gas chromatography–mass spectrometry in the atmospheric environment of Zonguldak, Turkey

A gas chromatography–mass spectrometry method has been proposed for the determination of low-level mutagenic and carcinogenic nitrosamines in particulate matter. The method includes the collection of particulate matters (PM_2.5 and PM₁₀) using a dichotomous Partisol 2025 sampler and extraction of the compounds from aqueous solution with dichloromethane/2-propanol after sonication with a slightly basic water solution prior to their GC-MS analysis in electron impact mode. The obtained recoveries of nitrosamines ranged from 92.4 to 99.2 %, and the precision of this method, as indicated by the relative standard deviations, was within the range of 0.95–2.46?%. The detection limits obtained from calculations using the GC-MS results based on S/N?=?3 were found within the range from 4 to 22 pg/m³. The predominant nitrosamines determined in particulate matter were N-nitrosodimethylamine, N-nitrosodiethylamine, N-nitrosodibutylamine and N-nitrosomorpholine. Furthermore, N-mono- and dinitrosopiperazine and N-nitrosoethylbutylamine were also determined. N-dinitrosopiperazine was detected in PM_2.5 samples at the highest concentrations of up to 22.85 ng/m³ and in PM_2.5–10 samples at concentrations up to 7.60 ng/m³ in winter, whereas it was found in PM_2.5 samples up to 5.15 ng/m³ and in PM_2.5–10 samples up to 3.12 ng/m³ in summer. The total concentrations of nitrosamines were up to 161.4 ng/m³ in fine and 53.90 ng/m³ in coarse fractions in winter, whereas in summer were up to 35.24 and 12.60 ng/m³, respectively. The concentration levels of nitrosamines fluctuated significantly within a year, with higher means and peak concentrations in the winter compared to that in the summertime. The seasonal variations of particle-associated nitrosamine concentrations were investigated together with their relationships with meteorological parameters using Pearson’s correlation analysis in the winter and summer periods. Analysis of variance was used to determine which concentrations of nitrosamines were statistically different from one another and, together with meteorological parameters and discriminant analysis, was used to classify the particle samples by particle size according to seasons. The classification results of the particle samples in different seasons were very satisfactory, allowing 99.5 % of cases to be correctly grouped.     

A PLP–LIF kinetic study of the atmospheric reactivity of a series of C4–C7 saturated and unsaturated aliphatic aldehydes with OH

Absolute rate coefficients for the reaction of OH radical with a series of saturated and unsaturated aliphatic aldehydes were measured with the pulsed laser photolysis/laser-induced fluorescence technique at room temperature and as a function of total pressure (p_T=100–400 Torr). No pressure dependence of the rate coefficients was observed. The weighted average values obtained, k_OH±2σ, in units of 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, were 2.88±0.26 for n-butanal, 2.48±0.24 for n-pentanal, 2.60±0.21 for n-hexanal, 2.96±0.23 for n-heptanal, 3.51±0.71 for crotonaldehyde, 2.35±0.32 for trans-2-pentenal, 2.95±0.45 for trans-2-hexenal and 2.45±0.30 for trans-2-heptenal, respectively. The results are compared with previous data when available and with the corresponding coefficients for the reactions with NO₃ and O₃. The dominant tropospheric chemical loss process for these aliphatic aldehydes is the daytime reaction with OH, except in the case of trans-2-heptenal where the estimated lifetime for the reaction with NO₃ radical is smaller than the corresponding value for the OH reaction.     

The photochemical formation and gas–particle partitioning of oxidation products of decamethyl cyclopentasiloxane and decamethyl tetrasiloxane in the atmosphere

Decamethyl cyclopentasiloxane (D₅) and decamethyl tetrasiloxane (MD₂M) were injected into a smog chamber containing fine Arizona road dust particles (95% surface area <2.6 μM) and an urban smog atmosphere in the daytime. A photochemical reaction – gas–particle partitioning reaction scheme, was implemented to simulate the formation and gas–particle partitioning of hydroxyl oxidation products of D₅ and MD₂M. This scheme incorporated the reactions of D₅ and MD₂M into an existing urban smog chemical mechanism carbon bond IV and partitioned the products between gas and particle phase by treating gas–particle partitioning as a kinetic process and specifying an uptake and off-gassing rate. A photochemical model PKSS was used to simulate this set of reactions. A Langmuirian partitioning model was used to convert the measured and estimated mass-based partitioning coefficients (K_P) to a molar or volume-based form. The model simulations indicated that >99% of all product silanol formed in the gas-phase partition immediately to particle phase and the experimental data agreed with model predictions. One product, D₄TOH was observed and confirmed for the D₅ reaction and this system was modeled successfully. Experimental data was inadequate for MD₂M reaction products and it is likely that more than one product formed. The model set up a framework into which more reaction and partitioning steps can be easily added.     

Influence of algal bloom degradation on nutrient release at the sediment–water interface in Lake Taihu, China

Algal bloom could drastically influence the nutrient cycling in lakes. To understand how the internal nutrient release responds to algal bloom decay, water and sediment columns were sampled at 22 sites from four distinct regions of China’s eutrophic Lake Taihu and incubated in the laboratory to examine the influence of massive algal bloom decay on nutrient release from sediment. The column experiment involved three treatments: (1) water and sediment (WS); (2) water and algal bloom (WA); and (3) water, sediment, and algal bloom (WSA). Concentrations of dissolved oxygen (DO), total nitrogen (TN), total phosphorus (TP), ammonium (NH ₄ ⁺ -N), and orthophosphate (PO ₄ ^3? -P) were recorded during incubation. The decay of algal material caused a more rapid decrease in DO than in the algae-free controls and led to significant increases in NH ₄ ⁺ -N and PO ₄ ^3? -P in the water. The presence of algae during the incubation had a regionally variable effect on sediment nutrient profiles. In the absence of decaying algae (treatment WS), sediment nutrient concentrations decreased during the incubation. In the presence of blooms (WSA), sediments from the river mouth released P to the overlying water, while sediments from other regions absorbed surplus P from the water. This experiment showed that large-scale algal decay will dramatically affect nutrient cycling at the sediment–water interface and would potentially transfer the function of sediment as “container” or “supplier” in Taihu, although oxygen exchange with atmosphere in lake water was stronger than in columns. The magnitude of the effect depends on the physical–chemical character of the sediments.     

Concentrations of C2–C5 hydrocarbons in atmospheric air at Deonar,Bombay, in relation to possible sources

Atmospheric C₂–C₅ hydrocarbons were determined at Deonar, an industrial suburb north of Bombay, India, during 1985. Samples were pre-concentrated on silica gel at −78°C and subsequently desorbed on to a gaschromatographic column for separation and flame ionization detection. The seasonal pattern of the monthly geometric mean hydrocarbon concentrations are used to show that refinery emissions in addition to auto exhaust are a major source of hydrocarbons at Deonar.     

A model for NOx–O3–terpene chemistry in chamber measurements of plant gas exchange

Cuvette measurements are a tool to analyse CO₂ exchange, transipiration and deposition/emission of different trace gases by plants. To verify these experimental methods and to use them efficiently we have developed a numerical model with atmospheric chemical reactions. The model includes reactions between 54 different chemical species in the gas phase. Using the model we are able to determine optimal size/flow rate ratios and cuvette cycles (closure times) from an experimental point of view. Using the cuvette model with atmospheric chemistry more accurate estimates for emissions/deposition rates of different species can be found. Some chemical reactions are significant, e.g. for NO and terpenes, as regards the analysis and interpretation of measured concentrations. With slower flow rates through a cuvette the significance of reactions is more pronounced. However, there are some species like ozone, where stomatal deposition is a dominant phenomenon and chemistry plays a minor role.     

Experimental testing of an annular denuder and filter system to measure gas–particle partitioning of semivolatile bifunctional carbonyls in the atmosphere

An annular denuder and filter-pack system was tested in combination with the use of the in-tube and on-fiber O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA)-derivatization technique to simultaneously sample and measure gaseous and particulate concentrations of semivolatile bifunctional carbonyl compounds in the atmosphere. Ozone was denuded from the sampling air to avoid oxidation and PFBHA was used as the sorbent by coating the sampling denuders and impregnating the filters. The collection efficiency of the system was evaluated under different conditions in photochemical smog chamber experiments and in field samplings of urban and suburban atmospheres. The effects of concentration level, temperature, and humidity on the collection efficiency were assessed. The system showed average collection efficiencies in one denuder from 81% for pyruvic acid and 82% for glyoxylic acid to 87% for hydroxyacetone and dihydroxyacetone. The capacity of the filters to collect the gaseous fraction that cannot be collected in the denuders was also evaluated, and the system allows a correction for this artifact. The application of this method to chamber experiments and field samplings offers an easy-to-apply technique with good results that can be used to evaluate the partition mechanisms of these compounds in the atmosphere.     

Does the potency of economic globalization and political instability reshape renewable energy usage in the face of environmental degradation?

Environmental Science and Pollution Research - Since renewable energy is essentially non-carbohydrate in nature, it can generate little or no pollutants and can therefore help in achieving both...     

Fe(III)–EDDS complex in Fenton and photo-Fenton processes: from the radical formation to the degradation of a target compound

The present work compares the efficiency of homogenous Fenton and photo-Fenton processes in the presence of Fe(III)–EDDS complex under different experimental conditions. 4-tert-Butylphenol (4-t-BP), which is one of the endocrine disrupting chemicals, was used as a model pollutant to investigate the Fenton and photo-Fenton application. The efficiency of homogenous photo-Fenton process was significantly much higher than homogenous Fenton process, which is due to the rapid formation of Fe²⁺ under UV irradiation of the iron complex and the photochemical formation of HO^? from the photolysis of the complex Fe(III)–EDDS. Through the degradation of 4-t-BP, the effect of Fe(III)–EDDS concentration, H₂O₂ concentration, pH, and oxygen was investigated in both processes. Such trend was also correlated with pH calculating the polychromatic Fe²⁺ quantum yield formation at pH 4.0, 6.0, and 8.6. The results showed that at high Fe(III)–EDDS and H₂O₂ concentrations, a negative effect was found. By the way, the Fenton process was found to be enhanced at basic pH. These results can be very useful for the use and optimization of such iron complex in water treatment process as function of different physico-chemical conditions.     

Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

A model of natural degradation of 17-α-ethinylestradiol in surface water and identification of degradation products by GC-MS

Over the past decade, the environment has been polluted by a wide spectrum of exogenous chemicals and environmental analysis has become one of the most progressive parts of analytical research. The aim of this work was to determine the kinetics of natural degradation, and to identify the degradation products of the massively used estrogenic drug, 17-α-ethinylestradiol. The photodegradation, oxidation and thermostability conditions were selected according to ICH requirements for pharmaceutical stability testing. A simple 72-h photodegradation study in purified water exhibited significant first-order kinetics with the kinetic constant k = 0.0303 h^?1, and degradation halftime 22.8 h. The basic halftime could be reduced to 17.1 h by the addition of sea salt, and increase in temperature. Monohydroxy, dihydroxy and dehydrogenated derivatives of ethinylestradiol with intact steroidal structure were identified as major degradation products resulting from simple photodegradation. The addition of an oxidative agent significantly accelerated the degradation rate; combined with higher temperature, the degradation halftime was reduced to 1.1 h with the first-order kinetic constant k = 0.632 h^?1. TOC analysis showed a notable decrease of organic mass (18% in 3 days) during oxidation experiments, and confirmed the degradation of steroidal structure.