PET bottle use patterns and antimony migration into bottled water and soft drinks: the case of British and Nigerian bottles

While antimony has been reported to migrate from PET bottles into contents, reports on bottled water and soft drinks usage and PET bottle reuse patterns are currently unavailable in the literature. Bottle use conditions and patterns are important determinants of antimony migration. In this work a survey assessing the pattern of bottle use and reuse in Britain and Nigeria was undertaken. The survey findings influenced the design of laboratory experiments that assessed the migration of antimony from PET bottles into water and soft drinks. Typical storage durations for bottled contents between purchase and opening for use were 7 days or less. However storage of up to one year was reported. Bottle reuse was high and similar for the two countries with reuse durations being higher in Nigeria. The antimony concentration in 32 PET bottle materials from Britain and Nigeria were similar and ranged between 177 and 310 mg kg(-1). For 47 freshly purchased British bottled contents antimony concentration ranged between 0.03 and 6.61 μg L(-1) with only one sample exceeding the EU acceptable limit. Concentrations of Cd, Ge, Zn, Al, Be, Ti, Co and Pb were also measured. At realistic temperatures of 40 and 60 °C antimony concentration in deionised water in bottles remained below the EU acceptable limit even after 48 h exposure. The limit was exceeded for most exposures at 80 °C. Concentration of antimony in some bottled contents exceeded the EU limit after 11 months of storage at room temperature. Bottle aging and increase in bottle volume were associated with decreased migration of antimony from bottles.     

Monitoring of copper,arsenic and antimony levels in agricultural soils impacted and non-impacted by mining activities,from three regions in Chile

This paper reports a comparative study of the concentration of three important environmental elements that are often found together in mineral deposits and then associated with mining activities; copper, arsenic and antimony. These elements were determined in 26 different agricultural soils from regions I, II and V in Chile, zones where the most important and biggest copper industries of this country are located. As background levels of these elements in soils have not been well established, in this study, both, impacted and non-impacted agricultural soils from different regions were considered. The relationships between the concentrations of these elements in soils were also examined. The concentration ranges for copper, arsenic and antimony were 11-530; 2.7-202 and 0.42-11 mg kg(-1) respectively. The copper concentrations in non-polluted soils from the north and central zone of Chile were similar. However, three sites from the north region have copper concentration as higher as 100 mg kg(-1), values that exceed the critical concentration for copper in soils. The concentration of arsenic and antimony in the north soils were higher than in non-impacted ones and, in the case of arsenic, greatly exceeded the world average concentration reported for this element in soils. The highest arsenic and antimony concentrations were found in Calama and Quillagua soils, two different sites in the Loa valley. The arsenic/antimony concentration ratio was higher in Quillagua soil. The high concentrations of three elements determined in impacted soils from region V (Puchuncaví and Catemu valleys) clearly shows the impact produced in this zone by the industrial and mining activities developed in their proximities. At Puchuncaví valley a clear decrease was observed in copper, arsenic and antimony concentrations in soils on the function of the distance from the industrial complex "Las Ventanas", and all concentrations exceeded the reported critical values for this matrix. Instead at Catemu valley, only the copper concentration was higher than this value. Statistically significant correlation was found for Cu-Sb in all soils; more significant Cu-As, Cu-Sb and Sb-As correlations were evaluated for soils from Puchuncaví and Catemu valleys, corroborating that high concentrations of copper, arsenic and antimony in these soils coming from the same pollution sources, the copper industry and the thermoelectric power plant.     

Measurement of total antimony and antimony species in mine contaminated soils by ICPMS and HPLC-ICPMS

This paper describes the measurement of total antimony and antimony species in "real world" mine contaminated sediments using ICPMS and HPLC-ICPMS. Low and high temperature microwave extraction procedures (90 degrees C and 150 degrees C, respectively) using a range of nitric-hydrochloric acid combinations were examined as to their efficacy to extract antimony from six mine contaminated soils and a certified reference material. The use of the higher temperature with nitric-hydrochloric acid (1:2 (v/v)) was suitable to release antimony from sediments and the certified reference material, NIST 2710 Montana soil. Antimony concentrations obtained using this acid mixture were similar to those obtained using a more aggressive extraction with nitric, hydrochloric, perchloric and hydrofluoric acid mixture. A 25 mM citric acid solution at 90 degrees C for 15 min extracted 47-78% of antimony from soils. A Hamilton PRP X-100 anion exchange column with 20 mM EDTA mobile phase, pH 4.5, flow rate 1.5 mL min(-1) and column temperature of 50 degrees C was used to separate antimony species. Column recoveries ranged from 78-104%. The predominant form of antimony was Sb(5+). Little conversion of Sb(5+) occurred (<5%) during extraction, however, significant conversion of Sb(3+) occurred (approximately 36%). The extraction of antimony species with citric acid should be useful in the determination of inorganic antimony available to plants, as plants commonly excrete carboxylic acids, including citric acid, into their rhizospheres to mobilise trace elements for nutritional purposes.     

Determination of antimony in human blood with inductively coupled plasma-mass spectrometry

A method is presented for the determination of antimony in whole human blood samples with an ICP-MS instrument using a quadrupole mass analyzer. A nitric acid/hydrogen peroxide open digestion procedure was employed for the blood sample treatment and preparation for analysis. The precision and accuracy of the method were evaluated by analyzing several Seronorm trace elements whole blood reference materials. The precision of the method at various antimony levels was better than 4% RSD and the recovery was greater than 92% at all levels. The detection limit, calculated as three times the standard deviation of the blank (3sigma, n= 12), was 0.03 microg L(-1). The method was successfully applied for the determination of antimony in blood samples from school children in rural areas of Kwazulu/Natal, South Africa and adults from Dearborn, Michigan. Blood antimony levels ranged from <0.03 to 3.82 microg L(-1) in children and 1.40 to 4.35 microg L(-1) for adults.     

Occupational exposure to antimony compounds

The toxicology of antimony and its compounds is known from three sources: its medicinal use over centuries, studies of process workers in more recent times, and more recent still, studies of its presence in modern city environments and in domestic environments. Gross exposure to antimony compounds over long periods, usually the sulfide (SbS3) or the oxide (Sb2O3) has occurred in antimony miners and in antimony process workers. There have been relatively few of these, and few studies of possible symptoms have been made. Antimony sulfide imported from, at different times, China, South Africa, and South America was processed in the North-East of England from about 1870 to 2003. The process workers in North-East England have been studied at different times, notably by Sir Thomas Oliver in 1933, and by the Newcastle upon Tyne University Department of Occupational Medicine on later occasions. Studies which have been made of the working environment, and in particular of the risk of lung cancer in process workers, have underlined the high levels of exposure to antimony compounds and to other toxic materials. However, the working conditions in antimony processing have improved markedly over the last 30 years, and the workforce had been much reduced in numbers following automation of the process. Prior to the cessation of the industry in the UK it had become a 'white coat' operation with relatively few people exposed to high concentrations of antimony. Antimony, which is normally present in domestic environments, has also been studied as a possible cause of cot death syndrome (SIDS) but extensive investigations have not confirmed this. The full importance of environmental antimony has still to be determined, and evidence of specific effects has not yet been presented.     

Observations on the measurement of total antimony and antimony species in algae, plant and animal tissues

This paper describes our experiences with undertaking measurements of total antimony and antimony speciation in algae, plant and animal tissues. Digestion with nitric acid alone is suitable to release antimony from animal tissues. When organisms have high silica contents, e.g. some plants and algae, the addition of tetrafluorboric acid is required to dissolve silica as some antimony is retained by silica in extracts. Antimony in digested extracts is present as Sb5+ and hydride generation procedures can be used to determine total antimony concentrations, as total antimony in extracts will not be under estimated. Relatively non-aggressive solvents such as water, dilute nitric acid, sodium hydroxide and enzymes remove highly variable amounts of antimony (2-84%) from algae, plant and animal tissues. Addition of Sb3+ and Sb5+ to NIST CRM 1572 Citrus Leaves, pre- and post-extraction with water showed that Sb3+ is oxidised to Sb5+ while Sb5+ is redistributed amongst binding sites giving rise to artefacts. DOLT-2 and algae extracts indicated the presence of only inorganic antimony. A moss sample had inorganic antimony and a number of unknown antimony species in extracts. Future studies should explore the nature of the binding of antimony in tissues as solvents commonly used to extract metals and metalloids from algae, plant and animal tissues are not appropriate.     

Development of plastic disks containing flame retardants for elucidating changes in their concentrations due to simulated weathering and the application of these disks to weathering tests

Flame retardants (FRs) are useful because they can prevent combustion and delay the spread of fire after the ignition on commercial products containing plastics. However, such commercial products could be a primary source of environmental contamination with FRs. Plastic disks containing FRs were prepared to elucidate changes in the concentrations of the FRs after weathering tests. Acrylonitrile-butadiene-styrene (ABS) and polycarbonate (PC) resin were separately kneaded with a combination of three organic FRs [Dechlorane plus (DP), tetrabromobisphenol A (TBBPA), and triphenyl phosphate (TPhP)] and one inorganic FR [antimony trioxide (Sb₂O₃)]. The concentrations of TBBPA/TPhP and DP/Sb₂O₃ in the final preparations were respectively 1000 and 500 mg/kg in compliance with the RoHS directive on organobromine FR. The concentrations of elements in the final preparations were 300 mg/kg for chlorine, 600 mg/kg for bromine, 100 mg/kg for phosphorus, and 400 mg/kg for antimony, respectively. The analytical concentrations (three FRs and four elements) were consistent with the expected concentrations (maximum difference ?9.5% in the PC disks). The FRs and elements in the disks were sufficiently homogenous (maximum inhomogeneity 4.3% in the PC disks). The prepared disks were subjected to weathering tests; the concentrations of TBBPA in the disks decreased significantly (30 to 40%) whereas the concentrations of the elements did not change under the condition of this study. On the other hand, there were no drastic differences on relationships of FRs and elements such as DP/chlorine and TPhP/phosphorus.     

Investigation into antimony mobility in sewage sludge fermentation

Antimony is distributed in the environment in inorganic and organic species with different solubility and mobility characters. Here we investigate the transformation of antimony in view of biomethylation during sewage sludge fermentation as a case study for an anaerobic environment. Our approach was to identify if antimony methylation follows the Challenger pathway by using isotopically enriched antimonite (123Sb(v)). The antimony source was subjected to methylation in sewage sludge, an anaerobic dominant methanogenic Archaea community. The antimony species were determined in the gas phase using cryotrapping (CT)-GC-ICP-MS, and in the medium (sewage slude) by hydride generation (HG) prior CT-GC-ICP-MS. The determined 123/121Sb isotope ratios in the volatile trimethylstibine and non-volatile methylantimony species indicated that the methylation follows the proposed methylation pathway. With this approach we were able to quantify 123Sb incorporation into monomethyl-, dimethyl- and trimethylantimony, respectively. The incorporation decreased with further methylation from 91% to 82% and 73%. Volatilisation as trimethystibine was generally lower than 0.1%, however, up to 0.8% of added antimony was found methylated to methylantimony species and mainly accumulated in the cell. Moreover, antimony biomethylation was enhanced by stimulation of the anaerobic communities of methanogenic Archaea and sulfate reducing bacteria (SRB), with the methanogens showing a higher activity.     

土壤环境中锑的生物毒性评价方法比较

锑的生物毒性测试可以间接反映锑及其化合物对生物与生态系统的影响.在简要介绍锑在土壤环境中赋存特征的基础上,综述了不同类型生物对土壤及其浸提液中锑的毒性响应,比较了不同的生物毒性测试方法在土壤环境中锑污染识别的可行性及适应性,并提出了考虑土壤性质及老化时间对锑生物毒性评价的影响,以及使用不同营养等级指示生物(微生物、动物...     

Historical pollution of seldom monitored trace elements in Sweden--Part B: sediment analysis of silver, antimony, thallium and indium

Sediment cores from four boreal and remote lakes in a south to north transect in central Sweden were analysed for acid leachable silver, antimony, thallium and indium in the solid sediment phase and the corresponding porewater. Dating of the cores was made by their content of acid leachable lead and the (206)Pb/(207)Pb ratio, in one lake also by (210)Pb. The impact of diagenesis on element redistribution in the sediments was included and found to be minor except for thallium. The results show lowered concentrations towards the north and most intense accumulation after the Second World War, which is taken as evidence for atmospheric deposition being the primary source. Indium has declining concentrations in recent strata while silver and antimony increase. Thallium has lowered acid-leachable concentrations in recent strata. For all metals the impact of domestic industrialisation as well as the early industrialisation of central Europe is discernible. Only thallium appears to reach a geological background at depths that correspond to the late 18th century. For the other metals elevated levels are concluded.     

Lead in Soil and Sediment in Iqaluit, Nunavut, Canada, and Links with Human Health

This study determined the spatial distribution of soiland of sediment-associated lead in Iqaluit, Nunavut.Samples were collected from the following areas:outside the built-up area of the town to reflectbackground concentrations; known or potential pointsources of lead, such as the Upper Base, the SylviaGrinnell Dump and the Metal Dump (North 40); andresidential and commercial areas of Iqaluit and Apex,a satellite community. In the laboratory, the <63 m sample fraction was analyzed for total lead andbioavailable lead, estimated by non-residual acidextractable lead content. The research findings revealthat elevated levels of bioavailable lead are presentin the study area. Total lead concentrations generallydo not exceed environmental guidelines. However, leadconcentrations in the Sylvia Grinnell Dump, and Apexand Iqaluit grid areas exceed health-based guidelines.The research concludes that there is not a serioushealth hazard posed by lead levels in the soil andsediment in the study area. However, severalenvironmental (elevated lead levels, bioavailableforms of lead and bare soil surfaces) and behaviouralfactors (vigorous and unsupervised play outside) maycreate a risk of lead exposure.     

环境敏感地区纺织染整工业锑污染物排放限值探究

在对纺织染整企业集聚、环境位置敏感的两个典型区域调研的基础上,通过类似重金属标准和毒性类比、排污治理情况及水体底泥中锑含量的分析、水环境承载力和允许排放浓度计算等技术论证,提出环境敏感地区纺织染整工业锑的排放限值按不同排放情形可分别设定为0.1 mg/L和0.05 mg/L。工程实例表明,采用基于聚合硫酸铁混凝沉淀法的高低浓度废水分质处理技术可满足排放限值要求,且经济成本可接受。     

绍兴市典型印染废水中重金属锑排放现状及排放源调查

分析和统计的86家印染工业企业当中,废水总排口中的总锑超标率为25.6%,质量浓度0.050 mg/L以下较低排放浓度所占比例最大,达62.8%。印染废水锑排放源主要有涤棉和涤纶化纤类布料的染色、印花工艺废水,碱减量工艺废水等,工业液碱、废酸以及硫酸铝污水处理剂等原料当中含锑浓度较高。印染废水经污水处理厂集中纳管深度处理后,锑排放浓度较低,锑去除效率最高达到88.0%,大大降低了环境地表水体锑污染的风险。     

Trace Metal Concentration in Roadside Surface Soil and Tree Back: A Measurement of Local Atmospheric Pollution in Abuja, Nigeria

Cadmium, copper, lead, nickel and zinc concentrations were analysed by atomic absorption spectrophotometry in surface soil and tree bark from different districts of Abuja, Nigeria, in order to determine the atmospheric trace metal input in the area.Elevated concentrations of some of the studied metals were observed in the soil and tree bark samples from the commercial/high traffic areas of the city compared to backgroundvalues. In soil samples, the average concentration of the metals were 0.6±0.4, 18.0±4.0, 281±39, 16±4 and66±23 g g^-1 dry weight for Cd, Cu, Pb, Ni and Zn, respectively, whilst the average concentrations in tree bark were 0.3±0.2, 12±4, 133±32, 13±3 and 61±10 g g^-1 dry weight for Cd, Cu, Pb, Ni and Zn, respectively. The trend in trace metal levels suggested that automobile emissions are a major source of these metals as the highest concentrations of Pb and Zn were recorded in the commercial areas of the city known for their high traffic densities. The levels of metal in the study area were relativelylow compared to levels found in some larger and older cities in various countries worldwide.     

Extractable copper, arsenic and antimony by EDTA solution from agricultural Chilean soils and its transfer to alfalfa plants (Medicago sativa L.)

Following our research on copper, arsenic and antimony in Chilean ecosystems, a study to understand the mobility and transport of these elements from soil to plants was carried out. So, the aim of this study, which follows on from the previous work, was to demonstrate if the total concentrations of these elements or their fractions extracted by 0.05 M EDTA pH 7 from different Chilean soils correlate with the respective total concentrations in the edible tissue of alfalfa plants collected simultaneously from 20 different sites affected or unaffected by mining activities. The highest copper fractions extracted by EDTA solutions were obtained in contaminated soils from the central region (41-69%); however the northern soils presented the highest extractable fractions of arsenic (9-34%). The antimony fraction was low in all soils (0.4-8.0%). Alfalfa plants from all contaminated sites presented high copper, arsenic and antimony concentrations (19-126 mg kg(-1), 5.7-16.3 mg kg(-1) and 0.16-1.7 mg kg(-1), respectively). Statistically significant correlations were obtained between the total contents of copper and arsenic and their respective extractable fractions in soils. Good correlations were found between elements in alfalfa plants. Correlations were also obtained between the total concentrations of three elements in soils and in alfalfa plants. However, excepting for antimony in the northern samples, higher correlation coefficients were evaluated when the extractable fractions were considered. Samples from the north region presented the highest copper transfer factor and the lowest for arsenic, in spite of the high concentration of this metalloid extracted by EDTA solution in these soils. There was not a clear trend on the transfer factor for antimony, probably due to the low content of this element in alfalfa plants and/or the low recovery obtained for this element by EDTA.     

Dissolved antimony concentrations in contrasted watersheds: the importance of lithogenic origin

A large series of data on dissolved antimony concentrations (900 values) from the hydrological network of Canton Geneva, Switzerland, has been statistically analysed. Data were collected from 90 sampling sites over 12 years. The watercourses surveyed (178 km) accounted for 73% of the total network. Previous studies have classified these rivers as belonging to three clearly-differentiated lithogenic zones: Alps (rivers draining crystalline regions), Jura (rivers draining carbonate-rich zones) and Plain (rivers draining molasses derived from the Alps). Antimony concentrations in the different river waters have been found to be significantly dependent on the geological characteristics of the drainage basins (median values: 0.13, 0.08 and 0.16 microg L(-1) for Alps, Jura and Plain, respectively). For antimony, it is thus possible to define background levels of the element adapted to the lithogenic characteristics for a system of interest. Since establishing background levels is an unavoidable preliminary step in any study aiming to identify and evaluate the various sources of pollution, the behaviour described here has undeniable implications for environmental surveys.     

含锑工业废水的样品保存方法研究

选取5-Br-PADAP光度法和原子吸收法分析预处理后水样的保存效果,经检测发现利用HNO,-HC1溶液作为固定剂,调节pH〈1后在无色玻璃瓶中贮存的样品,常温下可保存31d,锑回收率达95％以上,同时前处理带入的干扰离子最少,能够满足验收废水监测中质量控制要求。     

Contamination of Canadian and European bottled waters with antimony from PET containers

Using clean lab methods and protocols developed for measuring Sb in polar snow and ice, we report the abundance of Sb in fifteen brands of bottled water from Canada and forty-eight from Europe. Comparison with the natural abundance of Sb in pristine groundwaters, water bottled commercially in polypropylene, analyses of source waters prior to bottling, and addition of uncontaminated groundwater to PET bottles, provides unambiguous evidence of Sb leaching from the containers. In contrast to the pristine groundwater in Ontario, Canada containing 2.2 +/- 1.2 ng l(-1) Sb, 12 brands of bottled natural waters from Canada contained 156 +/- 86 ng l(-1) and 3 brands of deionized water contained 162 +/- 30 ng l(-1); all of these were bottled in PET containers. Natural water from Ontario bottled in polypropylene contained only 8.2 +/- 0.9 ng l(-1). Comparison of three German brands of water available in both glass bottles and PET containers showed that waters bottled in PET contained up to 30 times more Sb. To confirm that the elevated Sb concentrations are due to leaching from the PET containers, water was collected in acid-cleaned LDPE bottles from a commercial source in Germany, prior to bottling; this water was found to contain 3.8 +/- 0.9 ng l(-1) Sb (n = 5), compared with the same brand of water purchased locally in PET bottles containing 359 +/- 54 ng l(-1) (n = 6). This same brand of water in PET bottles, after an additional three months of storage at room temperature, yielded 626 +/- 15 ng l(-1) Sb (n = 3). Other German brands of water in PET bottles contained 253-546 ng l(-1) Sb (n = 5). The median concentration of Sb in thirty-five brands of water bottled in PET from eleven other European countries was 343 ng l(-1) (n = 35). As an independent check of the hypothesis that Sb is leaching from PET, the pristine groundwater from Canada (containing 2.2 +/- 1.2 ng l(-1) Sb) was collected from the source using PET bottles from Germany: this water contained 50 +/- 17 ng l(-1) Sb (n = 2) after only 37 days, even though it was stored in the refrigerator, and 566 ng l(-1) after six months storage at room temperature.     

Behaviors of dissolved antimony in the Yangtze River Estuary and its adjacent waters

Antimony is a naturally occurring and cumulatively toxic element. With increasing concern as an inorganic contaminant, research on its environmental behavior is becoming a necessity. However, very little is known about this element. To further understand its biogeochemical behaviors and roles in the ecosystem, the main species of dissolved inorganic antimony (Sb(iii) and Sb(v)) in Yangtze River Estuary and its adjacent waters were determined by hydride generation and atomic fluorescence (HG-AFS) in our study. Results show that in surface water, the concentration for Sb(iii) and Sb(v) were in the range 0.029 μg L(-1)～ 0.736 μg L(-1) and 0.121 μg L(-1)～ 2.567 μg L(-1), with averages of 0.152 μg L(-1) and 0.592 μg L(-1), respectively. While concentrations of Sb(iii) and Sb(v) in the bottom layer were much lower, ranging from 0.023 μg L(-1) to 0.116 μg L(-1) (average of 0.050 μg L(-1)) and from 0.047 μg L(-1) to 0.441 μg L(-1) (average of 0.194 μg L(-1)), respectively. Data analysis further demonstrates that the major processes controlling antimony geochemistry in the area are riverine input, atmospheric deposition, incursion of Taiwan Warm Current, and release from particulate phase. The surface-enrichment and bottom-depletion depth profile reveals it does appear as a mildly scavenged element but is less like arsenic than previously believed. Sb(v) was the predominant speciation in aquatic environment of our research, and Sb(iii) was a minor constituent of the total antimony. Regarding the adsorption-desorption process onto SPM, Sb(iii) has a higher affinity to particulate phase than Sb(v). Furthermore, the significant correlation between antimony and nutrients indicates it is an element with great biological potential, which is also an important behavior for antimony.     

Age dependence of potentially toxic elements (Sb,Cd, Pb,Ag) in human liver tissue from paediatric subjects

Toxic elements are present at low concentrations in the environment. This work was undertaken to investigate the age dependence of the liver content of selected elements in paediatric populations, as an index of internal exposure. Liver samples were collected at autopsy from 157 subjects, aged < 1 day to 6 years, as part of investigations on a possible role of Sb compounds in sudden infant death syndrome (SIDS). In addition to Sb, the concentrations of Ag, Cd and Pb were also determined by inductively coupled plasma mass spectrometry on the remaining digest. Comparison of 95% confidence intervals of the median concentrations of the four elements suggested that there were no differences between the two categories of cause of death, SIDS or those who had died of an identified disease. Cadmium, lead and antimony median concentrations were lower than corresponding values observed in adult populations. Silver concentrations were significantly higher at birth and decreased with age. Cadmium levels were almost negligible in neonates and infants, but increased in older children. The finding of non-negligible concentrations of both Ag and Pb in neonatal liver provides further direct evidence that these elements cross the human placental barrier. The reported data, by far the largest collection observed in subjects less than 1 year old, are the result of exposure, during pregnancy and in early childhood, to present levels of these elements in the environment. They can serve as a reference to compare post-mortem values from individuals or groups of subjects in this age range when an exposure risk is suspected and to highlight trends in human exposure.