An appraisal of the potential use of fly ash for reclaiming coal mine spoil

Growing dependence on coal-fired power plants for electrical generation in many countries presents ongoing environmental challenges. Burning pulverized coal in thermal power plants (TPPs) generates large amounts of fly ash (FA) that must be disposed of or otherwise handled, in an environmentally-sound manner. A possible option for dealing with fly ash is to use it as an amendment for mine spoil or other damaged soil. It has been demonstrated through studies in India and other countries that FA alone or in combination with organic or inorganic materials can be used in a productive manner for reclamation of mine spoil. The characteristics of FA, including silt-sized particles, lighter materials with low bulk density (BD), higher water holding capacity, favorable pH and significant concentrations of many essential plant nutrients, make it a potentially favorable amendment for mine spoil reclamation. Studies have indicated that the application of FA has improved the physical, chemical and biological qualities of soil to which it is applied. The release of trace metals and soluble salts from FA could be a major limitation to its application. This is particularly true of fresh, un-weathered FA or acidic FA, although perhaps not a concern for weathered/pond ash or alkaline FA. Some potential contaminants, especially metals and other salt ions, could be immobilized and rendered biologically inert by the addition of certain inorganic and organic amendments. However, in view of the variability in the characteristics of FAs that are associated with location, feed coal, combustion conditions and other factors, the suitability of a particular FA for a specific soil/mine spoil needs to be critically evaluated before it is applied in order to maximize favorable results and eliminate unexpected consequences. FA generated in India tends to be mostly alkaline, with lower levels of trace elements than are often found in FAs from other countries. The concentrations of potential chemical stressors, predominantly metals, in Indian FAs are often less than established or proposed permissible limits and are thus better suited for soil application. A major logistic limitation to the use of FA could be the cost involved in transport of ash from production to utilization sites.     

Acidification-neutralization processes in a lignite mine spoil amended with fly ash or limestone

A laboratory experiment was conducted to investigate the longterm effects of amending sulfide-rich lignite mine spoil with fly ash (originating from a coal-fired power station and largely comprised of aluminosilicates) and/or agricultural limestone. The experiment was carried out with soil moisture maintained at field capacity or alternate cycles of wetting and drying. Results obtained suggest that the principal acidification processes were oxidation of sulfide and formation of hydroxysulfate (FeOHSO4), whereas the main neutralization processes were weathering of aluminosilicates in fly ash-treated samples and dissolution of calcium carbonate in limestone-treated samples. The highest dose of limestone rapidly raised the pH of the spoil, but this increase was not maintained throughout the one-year experiment. In contrast, fly ash-treated samples showed a more sustained increase in pH, attributable to the gradual weathering of aluminosilicates. The best results (i.e., good short- and long-term neutralization) were obtained in samples treated with both fly ash and limestone. The low liming capacity of the fly ash (47.85 cmol kg(-1)) means that it must be used in large quantities, an advantage in achieving the further aim of disposing of the fly ash.     

Water quality characteristics of discharge from reforested loose-dumped mine spoil in eastern Kentucky

Surface mining is a common method for extracting coal in the coal fields of eastern Kentucky. Using the Forestry Reclamation Approach (FRA), which emphasizes the use of minimally compacted or loose-dumped spoil as a growth medium for trees, reclamation practitioners are successfully reestablishing forests. Yet, questions remain regarding the effects FRA has on the quality of waters discharged to receiving streams. To examine the effect of FRA on water quality, this study compared waters that were discharged from three types of spoils: predominantly brown, weathered sandstone (BROWN); predominantly gray, unweathered sandstone (GRAY); and an equal mixture of both aforementioned sandstones and shale (MIXED). The water quality parameters pH, EC, Ca, K, Mg, Na, NO-N, NH-N, SO, Cl, TC, suspended sediment concentration (SSC), settleable solids (SS), and turbidity were monitored over a 2-yr period on six 0.4-ha plots (two replications per spoil type). Generally, levels of Cl, SO, Ca, NO-N, NH-N, SS, SSC, and turbidity decreased over time. The pH for all spoils increased from about 7.5 to 8.5. The EC remained relatively level in the BROWN spoil, whereas the GRAY and MIXED spoils had downward trajectories that were approaching 500 μS cm. The value of 500 μS cm has been reported as the apparent threshold at which certain taxa such as Ephemeroptera (e.g., Mayfly) recolonize disturbed headwater streams of eastern Kentucky and adjacent coal-producing Appalachian states.     

Management of mine spoil for crop productivity with lignite fly ash and biological amendments

Long-term field trials using lignite fly ash (LFA) were carried out in rice crops during the period 1996-2000 at Mine I, Neyveli Lignite Corporation, Tamil Nadu. LFA, being alkaline and endowed with an excellent pozzolanic nature, silt loam texture, and plant nutrients, has the potential to improve the texture, fertility, and crop productivity of mine spoil. The rice crops were the first, third, fifth, and sixth crops in rotation. The other crops, such as green gram (second) and sun hemp (fourth), were grown as green manure. For experimental trials, LFA was applied at various dosages (0, 5, 10, 20, 50, 100, and 200 t/ha), with and without press mud (10 t/ha), before cultivation of the first crop. Repeat applications of LFA were made at the same dosages in treatments of up to 50 t/ha (with and without press mud) before cultivation of the third and fifth crops. Press mud, a lightweight organic waste product from the sugar industry, was used as an organic amendment and source of plant nutrients. Also, a recommended dosage of chemical fertilizer, along with gypsum, humic acid, and biofertilizer as supplementing agents, was applied in all the treatments, including control. With one-time and repeat applications of LFA, from 5 to 20 t/ha (with and without press mud), the crop yield (grain and straw) increased significantly (p < 0.05), in the range from 3.0 to 42.0% over the corresponding control. The maximum yield was obtained with repeat applications of 20 t/ha of LFA with press mud in the third crop. The press mud enhanced the yield in the range of 1.5-10.2% with various dosages of LFA. The optimum dosage of LFA was 20 t/ha for both one-time and repeat applications. Repeat applications of LFA at lower dosages of up to 20 t/ha were more effective in increasing the yield than the corresponding one-time applications of up to 20 t/ha and repeat applications at 50 t/ha. One-time and repeat applications of LFA of up to 20 t/ha (with and without press mud), apart from increasing the yield, evinced improvement in the texture and fertility of mine spoil and the nutrient content of crop produce. Furthermore, some increase in the content of trace and heavy metals and the level of gamma-emitters in the mine spoil and crop produce was observed, but well within the permissible limits. The residual effect of LFA on succeeding crops was also encouraging in terms of eco-friendliness. Beyond 20 t/ha of LFA, the crop yield decreased significantly (p < 0.05), as a result of the formation of hardpan in the mine spoil and possibly the higher concentration of soluble salts in the LFA. However, the adverse effects of soluble salts were annulled progressively during the cultivation of succeeding crops. A plausible mechanism for the improved fertility of mine spoil and the carryover or uptake of toxic trace and heavy metals and gamma-emitters in mine spoil and crop produce is also discussed.     

Characteristics of coal mine ventilation air flows

Coal mine methane (CMM) is not only a greenhouse gas but also a wasted energy resource if not utilised. Underground coal mining is by far the most important source of fugitive methane emissions, and approximately 70% of all coal mining related methane is emitted to the atmosphere through mine ventilation air. Therefore, research and development on mine methane mitigation and utilisation now focuses on methane emitted from underground coal mines, in particular ventilation air methane (VAM) capture and utilisation. To date, most work has focused on the oxidation of very low concentration methane. These processes may be classified based on their combustion kinetic mechanisms into thermal oxidation and catalytic oxidation. VAM mitigation/utilisation technologies are generally divided into two basic categories: ancillary uses and principal uses. However, it is possible that the characteristics of ventilation air flows, for example the variations in methane concentration and the presence of certain compounds, which have not been reported so far, could make some potential VAM mitigation and utilisation technologies unfeasible if they cannot cope with the characteristics of mine site ventilation air flows. Therefore, it is important to understand the characteristics of mine ventilation air flows. Moreover, dust, hydrogen sulphide, sulphur dioxide, and other possible compounds emitted through mine ventilation air into the atmosphere are also pollutants. Therefore, this paper presents mine-site experimental results on the characteristics of mine ventilation air flows, including methane concentration and its variations, dust loadings, particle size, mineral matter of the dust, and other compounds in the ventilation air flows. The paper also discusses possible correlations between ventilation air characteristics and underground mining activities.     

Bacterial reduction of selenium in coal mine tailings pond sediment

Sediment from a storage facility for coal tailings solids was assessed for its capacity to reduce selenium (Se) by native bacterial community. One Se(6+)-reducing bacterium Enterobacter hormaechei (Tar11) and four Se(4+)-reducing bacteria, Klebsiella pneumoniae (Tar1), Pseudomonas fluorescens (Tar3), Stenotrophomonas maltophilia (Tar6), and Enterobacter amnigenus (Tar8) were isolated from the sediment. Enterobacter hormaechei removed 96% of the added Se(6+) (0.92 mg L(-1)) from the effluents when Se(6+) was determined after 5 d of incubation. Analysis of the red precipitates showed that Se(6+) reduction resulted in the formation of spherical particles (<1.0 microm) of Se(0) as observed under scanning electron microscope (SEM) and confirmed by EDAX. Selenium speciation was performed to examine the fate of the added Se(6+) in the sediment with or without addition of Enterobacter hormaechei cells. More than 99% of the added Se(6+) (approximately 2.5 mg L(-1)) was transformed in the nonsterilized sediment (without Enterobacter hormaechei cells) as well as in the sterilized (heat-killed) sediment (with Enterobacter hormaechei cells). The results of this study suggest that the lagoon sediments at the mine site harbor Se(6+)- and Se(4+)-reducing bacteria and may be important sinks for soluble Se (Se(6+) and Se(4+)). Enterobacter hormaechei isolated from metal-contaminated sediment may have potential application in removing Se from industrial effluents.     

Establishing a Context for River Rehabilitation, North Fork Gunnison River, Colorado

Initial river rehabilitation efforts along the North Fork Gunnison River in Colorado focused on the use of in-stream structures and channel stabilization to create a single-thread channel with pools along a braided river. These efforts were based on the assumption that the river’s braided planform results primarily from land use during the past century. In order to establish a context for further rehabilitation, we evaluated the possibility that the river might be braided as a result of processes independent of land use. We estimated volume, grain-size distribution, and lithology of sediment sources along the river corridor and evaluated the planform stability of the river during the past century using historical sources, aerial photographs covering 1939–1997, and comparison of bankfull discharge and gradient in the study area to values published for braided and meandering rivers. Our results indicate that the North Fork Gunnison River has been primarily braided in its lower reaches during the past few hundred years, although the channel planform tends toward a single-thread channel during decades of lower precipitation and discharge. Although land use is not the primary cause of braiding along the North Fork Gunnison River, it has decreased channel stability, and rehabilitation efforts should be designed to reduce these effects. Our results illustrate the importance of planning river rehabilitation measures within a historical context that accounts for both catchment-scale and reach-scale controls on channel processes and planform.     

Inorganic pigments made from the recycling of coal mine drainage treatment sludge

Continuous industrial development increases energy consumption and, consequently, the consumption of fossil fuels. Coal mineral has been used in Brazil as a solid fuel for thermoelectric generators for several years. However, coal exploitation affects the environment intensely, mainly because Brazilian coal contains excess ash and pyrite (iron disulfide). According to the local coal industry syndicate, the average annual coal run per mine is 6 million ton/year; 3.5 million ton/year are rejected and disposed of in landfills. Besides pyrite, Brazilian coal contains Mn, Fe, Cu, Pb, Zn, Ge, Se, and Co. Additionally, the water used for coal beneficiation causes pyrite oxidation, forming an acid mine drainage (AMD). This drainage solubilizes the metals, transporting them into the environment, making treatment a requirement. This work deals with the use of sedimented residue from treated coal mine drainage sludge to obtain inorganic pigments that could be used in the ceramic industry. The residue was dried, ground and calcined ( approximately 1250 degrees C). The calcined pigment was then micronized (D(50) approximately 2mum). Chemical (XRF), thermal (DTA/TG), particle size (laser), and mineralogical (XRD) analyses were carried out on the residue. After calcination and micronization, mineralogical analyses (XRD) were used to determine the pigment structure at 1250 degrees C. Finally, the pigments were mixed with transparent glaze and fired in a laboratory roller kiln (1130 degrees C, 5min). The results were promising, showing that brown colors can be obtained with pigments made by residues.     

Microbial populations identified by fluorescence in situ hybridization in a constructed wetland treating acid coal mine drainage

Microorganisms are an integral part of the biogeochemical processes in wetlands, yet microbial communities in sediments within constructed wetlands receiving acid mine drainage (AMD) are only poorly understood. The purpose of this study was to characterize the microbial diversity and abundance in a wetland receiving AMD using fluorescence in situ hybridization (FISH) analysis. Seasonal samples of oxic surface sediments, comprised of Fe(III) precipitates, were collected from two treatment cells of the constructed wetland system. The pH of the bulk samples ranged between pH 2.1 and 3.9. Viable counts of acidophilic Fe and S oxidizers and heterotrophs were determined with a most probable number (MPN) method. The MPN counts were only a fraction of the corresponding FISH counts. The sediment samples contained microorganisms in the Bacteria (including the subgroups of acidophilic Fe- and S-oxidizing bacteria and Acidiphilium spp.) and Eukarya domains. Archaea were present in the sediment surface samples at < 0.01% of the total microbial community. The most numerous bacterial species in this wetland system was Acidithiobacillus ferrooxidans, comprising up to 37% of the bacterial population. Acidithiobacillus thiooxidans was also abundant. Heterotrophs in the Acidiphilium genus totaled 20% of the bacterial population. Leptospirillum ferrooxidans was below the level of detection in the bacterial community. The results from the FISH technique from this field study are consistent with results from other experiments involving enumeration by most probable number, dot-blot hybridization, and denaturing gradient gel electrophoresis analyses and with the geochemistry of the site.     

Environmental and human exposure assessment monitoring of communities near an abandoned mercury mine in the Philippines: a toxic legacy

Abandoned mines are an important global concern and continue to pose real or potential threats to human safety and health including environmental damage/s. Very few countries had government mine regulation and reclamation policies until the latter part of the century where legal, financial and technical procedures were required for existing mining operations. Major reasons for mine closure may be mainly due to poor economies of the commodity making mining unprofitable, technical difficulties and national security. If the mine is abandoned, more often than not it is the government that shoulders the burden of clean-up, monitoring and remediation. The topic of abandoned mines is complex because of the associated financial and legal liability implications. Abandoned mercury mines have been identified as one of the major concerns because of their significant long-term environmental problems. Primary mercury production is still ongoing in Spain, Kyrgzystan, China, Algeria, Russia and Slovakia while world production declined substantially in the late 1980s. In the Philippines, the mercury mine located southeast of Manila was in operation from 1955 to 1976, before ceasing operation because of the decline in world market price for the commodity. During this time, annual production of mercury was estimated to be about 140,000 kg of mercury yearly. Approximately 2,000,000 t of mine-waste calcines (retorted ore) were produced during mining and roughly 1,000,000 t of these calcines were dumped into nearby Honda Bay to construct a jetty to facilitate mine operations where about 2000 people reside in the nearby three barangays. In October, 1994 the Department of Health received a request from the Provincial Health Office for technical assistance relative to the investigation of increasing complaints of unusual symptoms (e.g. miscarriages, tooth loss, muscle weakness, paralysis, anemia, tremors, etc.) among residents of three barangays. Initial health reports revealed significant elevation of blood mercury levels exceeding the then recommended exposure level of 20ppb in 12 out of the 43 (27.9%) residents examined. The majority of the volunteers were former mine workers. In this study the abnormal findings included gingivitis, mercury lines, gum bleeding and pterydium. The most common neurologic complaints were numbness, weakness, tremors and incoordination. Anemia and elevated liver function tests were also seen in a majority of those examined. The assessment also revealed a probable association between blood mercury level and eosinophilia. The same association was also seen between high mercury levels and the presence of tremors and working in the mercury mine. To date, there are very limited environmental and health studies on the impact of both total and methylmercury that have been undertaken in the Philippines. Thus, this area of study was selected primarily because of its importance as an emerging issue in the country, especially regarding the combined effects of total and methylmercury low-dose and continuous uptake from environmental sources. At present the effects of total mercury exposure combined with MeHg consumption remain an important issue, especially those of low-dose and continuous uptake. Results of the study showed that four (4) species of fish, namely ibis, tabas, lapu-lapu and torsillo, had exceeded the recommended total mercury and methylmercury levels in fish (NV>0.5 microg/gf.w., NV>0.3 microg/gf.w., respectively). Saging and kanuping also exceeded the permissible levels for methylmercury. Total and methylmercury in canned fish, and total mercury in rice, ambient air and drinking water were within the recommended levels, however, additional mercury load from these sources may contribute to the over-all body burden of mercury among residents in the area. Surface water quality at the mining area, Honda Bay and during some monitoring periods at Palawan Bay exceeded total mercury standards (NV>0.002 ng/mL). Soil samples in two sites, namely Tagburos and Honda Bay, exceeded the EPA Region 9 Primary Remediation Goal recommended values for total mercury for residential purposes (NV>23 mg/kg). The hand to mouth activity among infants and children is another significant route for mercury exposure. Statistically significant results were obtained for infants when comparing the results after one year of monitoring for methylmercury levels in hair for both exposed and control sub-groups. Likewise, comparing the initial and final hair methylmercury levels among pregnant women/mothers in the exposed group showed statistically significant (p<0.05) results. Comparing the exposed and control sub-groups' mercury hair levels per sub-group showed statistically significant results among the following: (a) initial and final total mercury hair levels among children, (b) initial and final methylmercury hair levels among children, (c) final total mercury hair levels among pregnant women, (d) initial and final total mercury hair levels among mothers, and (e) initial and final methyl hair levels among mothers.     

Long-term evaluation of coal fly ash and mine tailings co-placement: A site-specific study

This study presents the results of a laboratory investigation conducted to evaluate the efficiency of coal fly ash to control the formation of acid mine drainage (AMD) from mine waste. Site-specific materials, coal fly ash from Atikokan Thermal Generating Station and mine tailings from Musselwhite mine, were mixed at different proportions for the investigation of the drainage chemistry and the optimal mix using static testing (acid–base accounting) and kinetic (column) testing. The acid–base accounting (ABA) results indicated that the fly ash possessed strong alkaline (neutralization) potential (NP) and could be used in the management of reactive mine tailings, thus ensuring prevention of AMD in the long-term. Column tests conducted in the laboratory to further investigate long-term performance of fly ash in the neutralization and prevention of acid mine drainage from tailings similarly showed that mixing fly ash with mine tailings reduces dissolution of many heavy metals from tailings by providing alkalinity to the system. It was found that a fly ash to tailings mass ratio equal to or greater than 15% can effectively prevent AMD generation from Musselwhite mine tailings in the co-placement approach.     

Soil carbon and nitrogen in 28-year-old land uses in reclaimed coal mine soils of Ohio

Carbon (C) and nitrogen (N) play an important role in the restoration of ecosystem functions of reclaimed mine soils (RMSs). Postreclamation land use in RMSs affects soil C and N pools and fluxes. We compared the effects of 28-yr-old postreclamation land uses (forest, hay, and pasture) on selected chemical properties of soil, and C and N pools in reference to undisturbed forest and moderately disturbed agricultural land use in southeastern Ohio. The electrical conductivity was higher in RMSs under hay than that in pasture and forest land uses. The RMSs under pasture, hay, and forest had moderately acidic, neutral to slightly alkaline, and slightly alkaline pH, respectively. In the 0- to 5-cm soil depth, soil organic C (SOC) was higher in RMSs under pasture by 99% and under hay by 52% over that under forest. Similarly, total nitrogen (TN) was higher in RMSs under pasture by 98% and under hay by 43% over that under forest. Aggregate-associated SOC concentration in the 0- to 5-cm depth decreased in the order of RMSs under hay > RMSs under pasture > RMSs under forest. The SOC pools in the 0- to 30-cm depth decreased in the order of RMSs under hay = RMSs under pasture > RMSs under forest = undisturbed forest = agriculture land use. Nitrogen pools followed a similar trend. Hay land use has a better potential for improving soil quality in RMSs by enhancing chemical properties and SOC and TN pools than forest or pasture land uses.     

The disposal of a lime water treatment residue on soil and spoil material from a coalmine: a glasshouse investigation

Eragrostis tef (Zucc.), Cenchrus ciliaris L., and Digitaria eriantha Steud. were grown in a soil (Psammentic Haplustalf) and spoil material from a coalmine both treated with a lime water treatment residue (WTR) at rates of 0, 50, 100, 200, and 400 g kg(-1). The yield of the grasses, from the sum of the three harvests, and concentrations of B, Ca, Cu, K, Fe, Mg, Mn, N, Na, P, and Zn in foliage from the second harvest were determined. The yield of grasses grown in the soil decreased exponentially as WTR application increased. The yields of C. ciliaris, D. eriantha, and E. tef (in the 400 g kg(-1) WTR treated soil) decreased by 74.4, 78.7, and 59.8%, respectively, when compared with the control treatments. In the spoil, the yield of E. tef and D. eriantha decreased by 13.6% and and D. eriantha by 23.9%, while an increase was observed for C. ciliaris (45.4%), at the highest WTR application rate. No relationship existed between yield of E. tef and WTR application rate when grown in the spoil, while a weak negative linear relationship (p < 0.05) was found for D. eriantha and a positive linear relationship existed for C. ciliaris. Magnesium concentrations of the grasses were positively correlated to WTR application rate. Grasses grown in the soil had higher Na concentrations, while those grown in the spoil typically had higher B, N, and Zn concentrations. The decreases in yield were attributed to nutrient deficiencies (notably Zn), induced by high WTR application rates that led to high substrate pH. Disposal of high rates of WTR on the mine materials was not recommended.     

Evaluating the sustainability of a regional system using Fisher information in the San Luis Basin, Colorado

This paper describes the theory, data, and methodology necessary for using Fisher information to assess the sustainability of the San Luis Basin (SLB) regional system over time. Fisher information was originally developed as a measure of the information content in data and is an important method in information theory. Our adaptation of Fisher information provides a means of monitoring the variables of a system to characterize dynamic order, and, therefore, its regimes and regime shifts. This work is part of the SLB Sustainability Metrics Project, which aimed to evaluate movement over time towards or away from regional sustainability. One of the key goals of this project was to use readily available data to assess the sustainability of the system including its environmental, social and economic aspects. For this study, Fisher information was calculated for fifty-three variables which characterize the consumption of food and energy, agricultural production, environmental characteristics, demographic properties and changes in land use for the SLB system from 1980 to 2005. Our analysis revealed that while the system displayed small changes in dynamic order over time with a slight decreasing trend near the end of the period, there is no indication of a regime shift. Therefore, the SLB system is stable with very slight movement away from sustainability in more recent years.     

Understanding of groundwater salinity using statistical modeling in a small tropical island,East Malaysia

This paper presents an understanding of groundwater salinity by identification of effective factors using chemometric methods (cluster analysis and multiple linear regressions) in Manukan Island, Sabah. Local groundwater and environmental properties were used to explore the effective factors of groundwater salinity. Cluster analysis showed salinity and chloride illustrated the highest similarities. Electrical conductivity and total dissolved solids were also grouped in the same cluster. Seawater is the only chloride source in groundwater of Manukan Island demonstrated an indication of seawater mixing in freshwater. It is an effect of upward movement of the seawater by pumping activities. Precipitation and evapotranspiration (environmental condition) with hydraulic heads were clustered together to show that they also influence salinity concentration in groundwater. Multiple linear regressions showed descending order of the factors from chloride (the largest contribution) to evapotranspiration (the smallest contribution) and illustrated the contribution to groundwater salinity in Manukan Island. The integrated results using chemometric methods have provided a way to identify the effective factors on groundwater salinity. This similar approach and resulting equation can be applied in other small tropical islands with alike hydrogeological condition and limited information available for a better understanding of its groundwater salinity.     

Lichens as biomonitors of air quality around a diamond mine, northwest territories, Canada

Lichens are known to be bioaccumulators of atmospheric pollutants and are abundant in the Canadian arctic. Mining in this region may negatively impact the tundra communities and these impacts may be detected by increased accumulation of heavy metals, greenhouse gas constituents, and organic compounds in lichen tissue. The effect of sampling direction and distance from a diamond mine on bioaccumulation in three lichen species, Flavocetraria nivalis, Flavocetraria cucullata, and Cladina arbuscula, was investigated. Eight sample sites were located immediately adjacent to a diamond mine, one in each cardinal and ordinal direction, and six sample sites each were located 30 and 60 km from the mine (cardinal, NE, and SE). Thirty-three major and trace elements, sulfate (SO(4)), nitrate (NO(3)), ammonium (NH(4)), polycyclic aromatic hydrocarbons (PAH), and phthalates were analyzed in lichen tissue and soil. A significant interaction occurred between distance and direction from the mine. Highest concentrations of Al, Cr, Cu, Fe, Ni, Ti, and V in lichen were at the mine site regardless of direction. Highest concentrations for all other elements were at the mine in at least two directions. Although present in lichen tissue, there was no significant difference among sites for Hg, Mn, S, and three phthalates. PAHs were below detection limits in lichen tissue. The effect of direction was dependent on element and species, although concentrations of most elements were greatest east or southeast of the mine site. At distance from the mine, direction had less of an effect on concentrations. Elevated concentrations in tissue did not negatively impact lichen or plant cover or lichen richness. This research strongly suggests selection of sample sites and species can impact results and interpretation of data from air quality monitoring programs that use lichens as biomonitors.     

Reduction and utilization of coal mine waste rock in China: A case study in Tiefa coalfield

In China, coal mine waste rock (CMWR) produced during coal mining and processing is still increasing significantly as a result of coal production which has huge environmental impact. CMWR reduction and utilization is a major issue for coal enterprises and government to reduce the surface footprint and the public environmental impact. Tiefa coalfield, an old coalfield with 60 years of coal exploitation, was selected as a case to study the methods to minimize the environmental impacts of CMWR piles in a short period. We argue that a systematic design on CMWR utilization is needed on the basis of a usage evaluation which takes consideration of CMWR source, compositions, and proximate analysis. Mine design is crucial and the base for reducing the CMWR generation at the headstream. Placing roadway into coal seam rather than rock, panel optimization, and parametric analysis for mining technique were conducted in Tiefa coalfield. A promising technology of CMWR backfill under the ground was employed with a resultant increase of coal recovery rate. The surface CMWR recycling depends on brick making, electricity generating, and rehabilitation of subsided land. The practice of the presented methods indicates that the CMWR piles on Tiefa coalfield may disappear in 3 years, which could significantly reduce the environmental impacts of CMWR dumps. The technologies conducted in Tiefa coalfield developed a model of CMWR reduction and utilization for Chinese coal mines.     

Herbaceous vegetation productivity, persistence, and metals uptake on a biosolids-amended mine soil

The selection of plant species is critical for the successful establishment and long-term maintenance of vegetation on reclaimed surface mined soils. A study was conducted to assess the capability of 16 forage grass and legume species in monocultures and mixes to establish and thrive on a reclaimed Appalachian surface mine amended with biosolids. The 0.15-ha coarse-textured, rocky, non-acid forming mined site was prepared for planting by grading to a 2% slope and amending sandstone overburden materials with a mixture of composted and dewatered, anaerobically digested biosolids at a rate of 368 Mg ha(-1) (dry weight). Tall fescue (Festuca arundinacea Schreb.), orchardgrass (Dactylis glomerata L.), switchgrass (Panicum virgatum L.), caucasian bluestem (Bothriochloa caucasia L.), reed canarygrass (Phalaris arundinacea L.), ladino clover (Trifolium repens L.), birdsfoot trefoil (Lotus corniculatus L.), crownvetch (Coronilla varia L.), alfalfa (Medicago sativa L.), common sericea lespedeza and AULotan sericea lespedeza (Lespedeza cuneata L.), tall fescue-ladino clover, tall fescue-alfalfa, orchardgrass-birdsfoot trefoil, switchgrass-AULotan, and an herbaceous species mix intended for planting on reforested sites consisting of foxtail millet [Setaria italica (L.) Beauv.], perennial ryegrass (Lolium perenne L.), redtop (Agrostis alba L.), kobe lespedeza (Kummerowia striata L.), appalow lespedeza (Lespedeza cuneata L.), and birdsfoot trefoil were established between spring 1990 and 1991. Vegetative biomass and/or persistence were assessed in 1996, 1997, 1998, 2000, 2001, and 2002. The high rate of biosolids applied provided favorable soil chemical properties but could not overcome physical property limitations due to shallow undeveloped soil perched atop a compacted soil layer at 25 cm depth. The plant species whose persistence and biomass production were the greatest after a decade or more of establishment (i.e., switchgrass, sericea lespedeza, reed canarygrass, tall fescue, and crownvetch) shared the physiological and reproductive characteristics of low fertility requirements, drought and moisture tolerance, and propagation by rhizome and/or stolons. Of these five species, two (tall fescue and sericea lespedeza) are or have been seeded commonly on Appalachian coal surface mines, and often dominate abandoned pasture sites. Despite the high rates of heavy metal-bearing biosolids applied to the soil, plant uptake of Cd, Cu, Ni, and Zn were well within critical concentrations more than a decade after establishment of the vegetation.     

Effect of flue gas desulfurization (FGD) by-product on water quality at an underground coal mine

In this paper, a field study was carried out to examine the effect of flue gas desulfurization (FGD) by-product on water quality at an underground coal mine in central-eastern Ohio. Flue gas desulfurizalion by-product was injected into the down-dip portions of the Robert-Dawson mine in an attempt to seal major seeps exiting the mine and to coat exposed pyritic surfaces. Immediately following grout injection, significant increases in acidity, iron, aluminum, sulfur, and calcium were observed at most surface and ground water locations near where grouting was carried out. Following this initial flush of elements, concentrations of most constituents have decreased to near pre-grouting levels. Data from the site and geochemical modeling suggest that an increase in water level or rerouting of drainage flow resulted in the dissolution of iron and aluminum sulfate salts and ferrihydrite. Dissolution of the FGD grout material resulted in increases in calcium and sulfate concentrations in the drainage waters. Water within the mine voids was saturated with respect to calcium sulfate and gypsum immediately following grout injection. Based on an analysis of core samples obtained from the site, acid mine drainage (AMD) was in contact with at least some portions of the grout and this resulted in grout weathering. Subsequent transport of calcium and sulfate to the underclay, perhaps by fracture flow, has resulted in the deposition of gypsum and calcium sulfate solids.