不同结构形状的街道峡谷内污染物扩散

针对不同的城市街道峡谷结构形状,通过求解二维不可压缩N-S方程和K-ε湍流模型方程及污染物对流扩散方程,数值模拟了街道峡谷内的流场及机动车排放污染物浓度场,从而说明了街道峡谷的结构是影响街道峡谷内污染气体扩散的主要因素之一。     

Evaluation of the QUIC-URB fast response urban wind model for a cubical building array and wide building street canyon

This paper describes the QUIC-URB fast response urban wind modeling tool and evaluates it against wind tunnel data for a 7 × 11 cubical building array and wide building street canyon. QUIC-URB is based on the Röckle diagnostic wind modeling strategy that rapidly produces spatially resolved wind fields in urban areas and can be used to drive urban dispersion models. Röckle-type models do not solve transport equations for momentum or energy; rather, they rely heavily on empirical parameterizations and mass conservation. In the model-experiment comparisons, we test two empirical building flow parameterizations within the QUIC-URB model: our implementation of the standard Röckle (SR) algorithms and a set of modified Röckle (MR) algorithms. The MR model attempts to build on the strengths of the SR model and introduces additional physically based, but simple parameterizations that significantly improve the results in most regions of the flow for both test cases. The MR model produces vortices in front of buildings, on rooftops and within street canyons that have velocities that compare much more favorably to the experimental results. We expect that these improvements in the wind field will result in improved dispersion calculations in built environments.     

Upstream Turbulence Effect on Pollution Dispersion

Experiments have been carried out to investigate turbulence at and above roof-level in an urban environment, and to predict the behaviour of street pollution from experiments using dye dispersion, for different roughness conditions and bed geometries. The flow in the boundary layer above an idealised urban environment has been simulated in a laboratory water flume. Comparisons have been made for the same model street canyon with and without the presence of upstream roughness. In the tests reported here, model street canyons were aligned perpendicular to the flow direction, and velocity measurements made within and above the model street canyons using a laser Doppler velocimeter (LDV). Flow visualisation techniques have also been used to confirm the gross flow features from streak images. Turbulence generated from the upstream roughness has a significant effect on the turbulence production and dispersion behaviour of the dye simulating pollution in street canyons.     

On thermally forced flows in urban street canyons

During sunny days with periods of low synoptic wind, buoyancy forces can play a critical role on the air flow, and thus on the dispersion of pollutants in the built urban environments. Earlier studies provide evidence that when a surface inside an urban street canyon is at a higher temperature than that of local ambient air, buoyancy forces can modify the mechanically-induced circulation within the canyons (i.e., gaps between buildings). The aspect ratio of the urban canyon is a critical factor in the manifestation of the buoyancy parameter. In this paper, computational fluid dynamics simulations are performed on urban street canyons with six different aspect ratios, focusing on the special case where the leeward wall is at a greater temperature than local ambient air. A non-dimensional measure of the influence of buoyancy is used to predict demarcations between the flow regimes. Simulations are performed under a range of buoyancy conditions, including beyond those of previous studies. Observations from a field experiment and a wind tunnel experiment are used to validate the results.     

LES validation of urban flow,part II: eddy statistics and flow structures

Time-dependent three-dimensional numerical simulations such as large-eddy simulation (LES) play an important role in fundamental research and practical applications in meteorology and wind engineering. Whether these simulations provide a sufficiently accurate picture of the time-dependent structure of the flow, however, is often not determined in enough detail. We propose an application-specific validation procedure for LES that focuses on the time dependent nature of mechanically induced shear-layer turbulence to derive information about strengths and limitations of the model. The validation procedure is tested for LES of turbulent flow in a complex city, for which reference data from wind-tunnel experiments are available. An initial comparison of mean flow statistics and frequency distributions was presented in part I. Part II focuses on comparing eddy statistics and flow structures. Analyses of integral time scales and auto-spectral energy densities show that the tested LES reproduces the temporal characteristics of energy-dominant and flux-carrying eddies accurately. Quadrant analysis of the vertical turbulent momentum flux reveals strong similarities between instantaneous ejection-sweep patterns in the LES and the laboratory flow, also showing comparable occurrence statistics of rare but strong flux events. A further comparison of wavelet-coefficient frequency distributions and associated high-order statistics reveals a strong agreement of location-dependent intermittency patterns induced by resolved eddies in the energy-production range. The validation concept enables wide-ranging conclusions to be drawn about the skill of turbulence-resolving simulations than the traditional approach of comparing only mean flow and turbulence statistics. Based on the accuracy levels determined, it can be stated that the tested LES is sufficiently accurate for its purpose of generating realistic urban wind fields that can be used to drive simpler dispersion models.     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

城市街道内机动车排放污染物NO对流扩散的特征

采用现场观测和数值模拟的方法研究了城市街道内机动车排放污染物中的NO扩散特征。结果表明:城市街道中机动车排放污染物的对流扩散取决于屋顶风向和风速,随着建筑物顶部气流速度的增大,街道内同样位置的污染物浓度相对减小;当风向垂直于街道轴线时,街道内同样位置的污染物浓度最大;同时街道内机动车排放的污染物浓度与车流量成正比关系,即机动车流量越大污染物浓度越高。     

Evaluation of Reynolds stress, k-ε and RNG k-ε turbulence models in street canyon flows using various experimental datasets

In this study the Reynolds-averaged Navier-Stokes computational fluid dynamics methodology is used, which has proved to be a powerful tool for the simulations of the airflow and pollutant dispersion in the atmospheric environment. The interest is focused on the urban areas and more specifically on the street canyons, several types of which are examined in order to evaluate the performance of various turbulence models, including a Reynolds-stress model and variations of the k-ε model. The results of the two-dimensional simulations are compared with measurements from a diversity of independent street canyon experimental datasets, covering a wide range of aspect ratios, free stream velocities and roughnesses. This way more general and reliable conclusions can be reached about the applicability, accuracy and ease of use of each turbulence model. In this work, the renormalization group k-ε presented better results in most cases examined, while the Reynolds-stress model did not stand up for the expectations and also exhibited convergence problems.     

An approach to simulate wind fields around an urban environment for wind energy application

This work proposes an approach to simulate wind flow fields around an urban environment with the aim of evaluating the potential impact of buildings on the general wind patterns and power production using the current generation of commercial wind turbines. The simulation process was performed with the aid of accessible computational tools that can potentially render the proposed procedure applicable in other cases of interest. The roughness of the urban environment was defined as the association of roughness map, topography, and an alternative process for obtaining the volumetry of buildings. A case study was conducted in a region located at the district of Boa Viagem (Recife-PE) for assessing the applicability of the approach. Scenarios were designed in order to simulate wind flow patterns and pre-identify sites that have suitable wind energy potential for electric power production by investigating the combination of wind speed magnitude and turbulence intensity. From the results obtained, it was possible to identify zones of potential wind sources that are not detected in classical wind atlas probably due to the influence of the built environment on local wind flow patterns.     

Numerical simulations of the effect of building configurations and wind direction on fine particulate matters dispersion in a street canyon

To explore the effect of traffic emissions on air quality within street canyon, the wind flow and pollutant dispersion distribution in urban street canyons of different H/W, building gap and wind direction are studied and discussed by 3D computational fluid dynamics simulations. The largest PM_2.5 concentrations are 46.4, 37.5, 28.4 µg/m³ when x = ? 88, ? 19.3, ? 19.3 m in 1.5 m above the ground level and the ratio of H/W is 1:1, 1:2 and 2:1, respectively. The flow around the top of the building and clearance flow between the buildings in street canyon influence by different H/W, which affected the diffusion of fine particulate matters. The largest PM_2.5 concentrations are 88.1, 31.6 and 33.7 µg/m³ when x = 148.0, ? 92.3 and ? 186.7 m above the ground level of 1.5 m height and the building gap of 0, 20 and 40%, respectively. The air flows are cut by the clearance in the street canyons, and present the segmental characteristics. The largest PM_2.5 concentrations are 10.6, 11.2 and 16.0 µg/m³ when x = 165.3 m, x = 58.0 and 1.5 m above the ground level of 1.5 m height and wind direction of the parallel to the street, perpendicular to the street and southwest, respectively. Modelled PM_2.5 concentrations are basic agreement with measured PM_2.5 concentrations for southwest wind direction. These results can help analyze the difussion of PM_2.5 concentration in street canyons and urban planning.

     

Evaluation of numerical simulations of CO2 transport in a city block with field measurements

Studying urban air-transport phenomena is highly complex, because of the heterogenous flow patterns that can arise. The main reason for these is the variable topology of urban areas, however, there is a large number of influencing variables such as meteorological conditions (e.g., wind situation, temperature) and anthropogenic factors such as traffic emissions. During a one-year CO₂ measurement campaign in the city of Basel, Switzerland, steep CO₂ gradients were measured around a large building. The concentration differences showed a strong dependency on the local flow regimes. Analysis of the field data alone did not provide a complete explanation for the mechanisms underlying the observed phenomena. The key numerical parameters were defined and the influence of turbulent kinetic energy dependency on the time interval for the Reynolds decomposition was studied. A Reynolds-Average Navier-Stokes Computational Fluid Dynamics (CFD) approach was applied in the study area and the CO₂ concentrations were simulated for six significant meteorological situations and compared to the measured data. Two flow regimes dependent on the wind situation, which either enhanced or suppressed the concentration of CO₂ in the street canyon, were identified. The enhancement of CO₂ in the street canyon led to a large difference in CO₂ concentration between the backyard- and street-sides of a building forming the one wall of the canyon. The specific characteristics of the flow patterns led to the identification of the processes determining the observed differences in CO₂ concentrations. The combined analysis of measurement and modeling showed the importance of reliable field measurements and CFD simulations with a high spatial resolution to assess transport mechanisms in urban areas.     

Turbulent kinetic energy budgets in a model canopy: comparisons between LES and wind-tunnel experiments

A comparative study of turbulence in a wind-tunnel model canopy is performed, using Large eddy simulation (LES) and experimental data from PIV and hot-wire anemometry measurements. The model canopy is composed of thin cylindrical stalks. In the LES, these are represented using a plant-scale approach, while the scale-dependent Lagrangian dynamic model is used as subgrid-scale model. LES predictions of turbulence statistics and energy spectra are found to be in good agreement with the experimental data. Turbulent kinetic energy (TKE) budgets from the LES simulation are analyzed to provide more information absent in the measurements. Results confirm that sloshing motions at the low levels of the canopy are mainly driven by pressure fluctuations. A difference between the energy flux obtained from the energy spectrum and the SGS dissipation rate is observed, consistent with a spectral bypass mechanism in which the real spectral flux due to cascade is smaller than that implied by the energy-spectrum level, due to direct drain by the canopy.     

Evaluation of CFD Simulation using RANS Turbulence Models for Building Effects on Pollutant Dispersion

CFD evaluations were performed to examine the applicability of the RANS methods in simulating pollutant dispersion near, within and over three typical building configurations: (1) an isolated building, (2) a building array and (3) an urban intersection. The CFD results are compared with values obtained from wind tunnel tests. In some situations major differences between the wind tunnel tests and the CFD results were observed. The main source of difference between the CFD and wind tunnel results was inadequate modelling of local flow patterns using the RANS turbulence models. Also inappropriate evaluation of high intermittent turbulent mixing in the RANS approach may lead to either over-prediction or under-prediction of the concentration level, by up to a factor of 10, depending on the case investigated.     

The Modelling of Turbulence from Traffic in Urban Dispersion Models — Part I: Theoretical Considerations

The modelling of pollutant dispersion at the street scale in an urban environment requires the knowledge of turbulence generated by the traffic motion in streets. In this paper, a theoretical framework to estimate mechanical turbulence induced by traffic in street canyons at low wind speed conditions is established. The standard deviation of the velocity fluctuations is adopted as a measure of traffic-produced turbulence (TPT). Based on the balance between turbulent kinetic energy production and dissipation, three different parameterisations for TPT suitable for different traffic flow conditions are derived and discussed. These formulae rely on the calculations of constants that need to be estimated on the basis of experimental data. One such estimate has been made with the help of a wind tunnel data set corresponding to intermediate traffic densities, which is the most common regime, with interacting vehicle wakes.     

On the heating environment in street canyon

This study investigates the impact of building aspect ratio (building-height-to-street-canyon-width-ratio), wind speed and surface and air-temperature difference (Δθ_s−a) on the heating environment within street canyon. The Reynolds-averaged Navier-Stokes (RANS) and energy transport equations were solved with Renormalization group (RNG) theory version of k-e{\varepsilon} turbulence model. The validation process demonstrated that the model could be trusted for simulating air-temperature and velocity trends. The temperature and velocity patterns were discussed in idealized street canyons of different aspect ratios (0.5–2.0) with varying ambient wind speeds (0.5–1.5 m/s) and Δθ_s−a (2–8 K). Results show that air-temperatures are directly proportional to bulk Richardson number (R _b ) for all but ground heating situation. Conversely, air-temperatures increase significantly across the street canyon with a decrease in ambient wind speed; however, the impact of Δθ_s−a was negligible. Clearly, ambient wind speed decreases significantly as it passes over higher AR street canyons. Notably, air-temperatures were the highest when the windward wall was heated and the least during ground heating. Conversely, air-temperatures were lower along the windward side but higher within the street canyon when the windward wall was heated.     

A Computational Fluid Dynamics Approach for Urban Area Transport and Dispersion Modeling

A simulation tool has been developed to model the wind fields, turbulence fields, and the dispersion of Chemical, Biological, Radiological and Nuclear (CBRN) substances in urban areas on the building to city blocks scale. A Computational Fluid Dynamics (CFD) approach has been taken that naturally accounts for critical flow and dispersion processes in urban areas, such as channeling, lofting, vertical mixing and turbulence, by solving the steady-state, Reynolds-Averaged Navier–Stokes (RANS) equations. Rapid generation of high quality cityscape volume meshes is attained by a unique voxel-based model generator that directly interfaces with common Geographic Information Systems (GIS) file formats. The flow and turbulence fields are obtained by solving the steady-state RANS equations using a collocated, pressure-based approach formulated for unstructured and polyhedral mesh elements. Turbulence modeling is based upon the Renormalization Group variant of the k–ε model (k–ε RNG). Neutrally buoyant simulations are made by prescribing velocity boundary condition profiles found by a power–law relationship, while turbulence quantities boundary conditions are defined by a prescribed mixing length in conjunction with the assumption of turbulence equilibrium. Dispersion fields are computed by solving an unsteady transport equation of a dilute gas, formulated in a Eulerian framework, using the velocity and turbulence fields found from the steady-state RANS solution. In this paper the model is explained and detailed comparisons of predicted to experimentally obtained velocity, turbulence and dispersion fields are made to neutrally stable wind tunnel and hydraulic flume experiments.     

The role of materials selection in the urban heat island effect in dry mid-latitude climates

This work investigates the role of materials selected for different urban surfaces (e.g. on building walls, roofs and pavements) in the intensity of the urban heat island (UHI) phenomenon. Three archetypal street-canyon geometries are considered, reflecting two-dimensional canyon arrays with frontal packing densities (λ_f) of 0.5, 0.25 and 0.125 under direct solar radiation and ground heating. The impact of radiative heat transfer in the urban environment is examined for each of the different built packing densities. A number of extreme heat scenarios were modelled in order to mimic conditions often found at low- to mid-latitudes dry climates. The investigation involved a suite of different computational fluid dynamics (CFD) simulations using the Reynolds-Averaged Navier–Stokes equations for mass and momentum coupled with the energy equation as well as using the standard k-ε turbulence model. Results indicate that a higher rate of ventilation within the street canyon is observed in areas with sparser built packing density. However, such higher ventilation rates were not necessarily found to be linked with lower temperatures within the canyon; this is because such sparser geometries are associated with higher heat transfer from the wider surfaces of road material under the condition of direct solar radiation and ground heating. Sparser canyon arrays corresponding to wider asphalt street roads in particular, have been found to yield substantially higher air temperatures. Additional simulations indicated that replacing asphalt road surfaces in streets with concrete roads (of different albedo or emissivity characteristics) can lead up to a ~5 °C reduction in the canyon air temperature in dry climates. It is finally concluded that an optimized selection of materials in the urban infrastructure design can lead to a more effective mitigation of the UHI phenomenon than the optimisation of the built packing density.     

LES validation of urban flow,part I: flow statistics and frequency distributions

Essential prerequisites for a thorough model evaluation are the availability of problem-specific, quality-controlled reference data and the use of model-specific comparison methods. The work presented here is motivated by the striking lack of proportion between the increasing use of large-eddy simulation (LES) as a standard technique in micro-meteorology and wind engineering and the level of scrutiny that is commonly applied to assess the quality of results obtained. We propose and apply an in-depth, multi-level validation concept that is specifically targeted at the time-dependency of mechanically induced shear-layer turbulence. Near-surface isothermal turbulent flow in a densely built-up city serves as the test scenario for the approach. High-resolution LES data are evaluated based on a comprehensive database of boundary-layer wind-tunnel measurements. From an exploratory data analysis of mean flow and turbulence statistics, a high level of agreement between simulation and experiment is apparent. Inspecting frequency distributions of the underlying instantaneous data proves to be necessary for a more rigorous assessment of the overall prediction quality. From velocity histograms local accuracy limitations due to a comparatively coarse building representation as well as particular strengths of the model to capture complex urban flow features with sufficient accuracy are readily determined. However, the analysis shows that further crucial information about the physical validity of the LES needs to be obtained through the comparison of eddy statistics, which is focused on in part II. Compared with methods that rely on single figures of merit, the multi-level validation strategy presented here supports conclusions about the simulation quality and the model’s fitness for its intended range of application through a deeper understanding of the unsteady structure of the flow.     

Comparison of atmospheric modelling systems simulating the flow,turbulence and dispersion at the microscale within obstacles

Three different modelling techniques to simulate the pollutant dispersion in the atmosphere at the microscale and in presence of obstacles are evaluated and compared. The Eulerian and Lagrangian approaches are discussed, using RAMS6.0 and MicroSpray models respectively. Both prognostic and diagnostic modelling systems are considered for the meteorology as input to the Lagrangian model, their differences and performances are investigated. An experiment from the Mock Urban Setting Test field campaign observed dataset, measured within an idealized urban roughness, is used as reference for the comparison. A case in neutral conditions was chosen among the available ones. The predicted mean flow, turbulence and concentration fields are analysed on the basis of the observed data. The performances of the different modelling approaches are compared and their specific characteristics are addressed. Given the same flow and turbulence input fields, the quality of the Lagrangian particle model is found to be overall comparable to the full-Eulerian approach. The diagnostic approach for the meteorology shows a worse agreement with observations than the prognostic approach but still providing, in a much shorter simulation time, fields that are suitable and reliable for driving the dispersion model.     

街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.