自制Cu-Bi2WO6的表征及其对苯酚的光催化降解

采用水热反应法制备Cu改性的Bi2WO6催化剂(Cu-Bi2WO6).采用XRD仪和紫外-可见光漫反射吸收光谱仪对自制Cu-Bi2WO6的结构进行了表征.考察了光催化降解工艺对Cu-Bi2WO6在可见光下催化氧化降解苯酚效果的影响.实验结果表明:自制Cu-Bi2WO6的吸收边带出现了明显红移,对可见光的利用率较Bi2WO6强;当水热反应pH为0.6时,Cu-Bi2WO6的光催化性能最好;在空气通入量为250 mL/min、Cu-Bi2WO6加入量为1.0 mg/L的条件下,光照反应210 min后苯酚降解率可达92.0％.     

微波-改性活性炭-Fenton试剂氧化法降解水中2,4-二氯酚

以经Fe2（SO4）3溶液浸渍改性的活性炭作催化剂、Fenton试剂作氧化剂,采用微波-改性活性炭-Fenton试剂氧化法降解水中的2,4-二氯酚。考察了改性活性炭加入量、H2O2与Fe^2＋摩尔比、Fenton试剂加入量、微波功率和2,4-二氯酚溶液初始pH对2,4-二氯酚降解效果的影响。在改性活性炭加入量1．0g／L、n（H2O2）：n（Fe^2＋）=16．7（H2O2加入量6．0mmol／L、Fe^2＋加入量0．36mmol／L）、Fenton试剂加入量为6．36mmol／L、微波功率600W、微波辐射时间10min、2,4-二氯酚溶液初始pH为6．0的条件下,2,4-二氯酚降解率和TOC去除率分别可达98．7％和84．0％。     

微波诱导催化剂Fe2O3-CeO2/γ-Al2O3的制备及其对甲基橙的催化降解性能

采用分层浸渍法制备了微波诱导催化剂Fe2O3-CeO2／γ—Al2O3。采用X射线衍射（XRD）和扫描电镜（SEM）等方法对所制备的催化剂进行了表征。以甲基橙为目标降解物,考察了该催化剂在微波诱导氧化工艺（MIOP）中的催化活性。实验结果表明,在微波输出功率为450W、催化剂加入量为10g/L的条件下,处理50mL质量浓度为25mg／L的甲基橙溶液,微波照射处理3min后,甲基橙溶液的脱色率达93．6％。     

α-Fe_2O_3/AC催化剂的制备及光Fenton反应降解双酚A

采用温和的无模板溶液反应合成了α-Fe_2O_3/AC复合催化剂,作为光Fenton降解双酚A反应的催化剂。通过XRD、SEM、FTIR、DRS、BET、XPS等方法对催化剂的形貌和理化特性进行了分析。结果表明:该催化剂晶型良好,为介孔材料,能够有效吸收和利用紫外光和可见光;该催化剂具有较高的催化活性,稳定性良好;在初始双酚A质量浓度为30 mg/L、溶液pH为4、H_2O_2加入量为320 mg/L、反应温度为40℃、催化剂加入量为1.33g/L的条件下,双酚A降解率可达91.4%。     

玫瑰花状分级结构BiOCl的制备及其光降解罗丹明B的性能

以麦芽糖为表面活性剂,采用水热法制备了玫瑰花状分级结构的Bi OCl光催化剂。采用XRD、SEM、TEM、SAED、FTIR、UV-Vis DRS、MS、BET比表面积和ESR等技术对所合成的催化剂进行了表征。以罗丹明B(Rh B)为模拟污染物研究了Bi OCl光催化剂的Rh B降解性能。实验结果表明:可见光下,在0.485 07 g Bi(NO3)3·5H2O中添加0.5 g麦芽糖、加入10 m L 0.2 mol/L的KCl溶液所制备的Bi OCl的光催化性能最好,在200 min时Rh B降解率达94%;Rh B的降解过程主要为脱乙基反应,降解机理主要是光敏化降解;Bi OCl催化剂具有良好的循环稳定性。     

氧化钆掺杂二氧化钛催化超声降解甲基橙的研究

用实验室合成的Gd2O3掺杂TiO2为催化剂,以甲基橙超声降解反应为模型,研究了各种因素对Gd2O3掺杂TiO2催化超声降解甲基橙的影响。研究结果表明,Gd2O3掺杂TiO2催化超声降解甲基橙的效果明显优于非掺杂的锐钛矿型TiO2的情况;在甲基橙溶液pH1．0～3．0、甲基橙质量浓度20mg／L、溶液用量100mL、催化剂用量0．5～1．0g／L的条件下,用输出功率1．0W／cm^2和频率25kHz的超声波照射60min,甲基橙降解率可达98．6％,COD去除率可达99．0％。     

α-Fe2O3/AC催化剂的制备及光Fenton反应降解双酚A

采用温和的无模板溶液反应合成了α-Fe₂O₃/AC复合催化剂,作为光Fenton降解双酚A反应的催化剂。通过XRD、SEM、FTIR、DRS、BET、XPS等方法对催化剂的形貌和理化特性进行了分析。结果表明：该催化剂晶型良好,为介孔材料,能够有效吸收和利用紫外光和可见光;该催化剂具有较高的催化活性,稳定性良好;在初始双酚A质量浓度为30 mg/L、溶液pH为4、H₂O₂加入量为320 mg/L、反应温度为40 ℃、催化剂加入量为1.33 g/L的条件下,双酚A降解率可达91.4%。     

WO_3/γ-Bi_2MoO_6异质结的制备及其光催化性能

采用微波溶剂热法—浸渍法制备了WO3/γ-Bi2Mo O6纳米异质结复合可见光催化剂(简称光催化剂),用XRD、SEM、XPS和UV-Vis分光光度法对其进行了表征。以甲基橙为目标降解物,考察了光催化剂的催化性能。表征结果显示:WO3分散在γ-Bi2Mo O6晶体表面,未进入晶格内部;与WO3和γ-Bi2Mo O6相比,WO3/γ-Bi2Mo O6在紫外和可见光区的吸收强度均有所提高,且对光的吸收发生了明显的红移,禁带宽度变窄;二者形成的p-n型异质结能及时有效地促进光生电子-空穴对的分离,提高催化活性。实验结果表明:WO3/γ-Bi2Mo O6的催化活性优于WO3和γ-Bi2Mo O6;在甲基橙溶液初始质量浓度为10 mg/L、光催化剂WO3(1.0%)/γ-Bi2Mo O6加入量为1 g/L时,反应3 h时甲基橙的降解率最高(达97.48%),甲基橙溶液中TOC的去除率也最高(为92.0%)。     

固态反应法制备FeHY催化剂及其催化降解活性艳蓝的性能研究

分别以NaY、NH4Y和HY沸石为载体,以乙酰丙酮铁为铁源,采用固态反应法制备了铁负载量均为10%（w）的FeNaY-10、FeNH4Y-10和FeHY-10催化剂。考察了各催化剂对活性艳蓝（KN-R）的降解效果,其中FeHY-10的催化降解效果最佳。采用XRD和FTIR技术对FeHY-10催化剂进行表征。表征结果显示,FeHY催化剂晶体结构仍然保持了Y分子筛特有的孔道结构,铁物种在Y 分子筛表面高度分散。催化降解实验表明,催化降解KN-R的最佳工艺条件为KN-R溶液（质量浓度为300 mg/L）加入量为50 mL、溶液pH为2、催化剂FeHY-25（铁负载量为25%（w））加入量为0.281 3 g、H2O2质量浓度为6.356 g/L、降解温度为35 ℃、降解时间为140 min,在此工艺条件下FeHY催化剂对KN-R的降解率为97.4%。     

纳米TiO2-石墨烯光催化剂的水热合成及其光催化性能

以钛酸四正丁酯和石墨为原料,通过水热法制备了锐钛矿型为主的纳米TiO2复合光催化剂（纳米TiO2-石墨烯）,并采用XRD,FTIR,FESEM,TEM技术对其进行了表征。通过紫外光照射降解溶液中的罗丹明B（RhB）研究了TiO2-石墨烯的光催化活性,分析了初始罗丹明B质量浓度、催化剂加入量、溶液pH和催化剂使用次数等影响降解效果的因素。实验结果表明：在初始RhB质量浓度为20 mg/L、溶液pH为7.10、催化剂加入量为1.000 g/L的条件下,紫外光照射30 min时,纳米TiO2-石墨烯对RhB的降解率高达98.69%,明显高于纳米TiO2的44.69%;纳米TiO2-石墨烯稳定性较强,可多次重复使用。     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

磷对环境的污染及防治对策

我国水体富营养化严重，其主要控制因子是磷。在分析磷污染的污染状况，污染源的基础上，介绍了防治对策，采用低磷循环冷却水处理剂，减少磷排放，是防止工业磷污染的有效方法。     

北京市居民衣服消费处置及对其回收利用认识调查与分析

首先对北京市居民每年购买新衣服的数量、支出、穿着时间、淘汰原因,以及闲置衣服的处理方式、数量等进行了调查与分析,然后对北京市居民对旧衣物回收利用的认识、回收形式及其处理方式,对旧衣物如何处理回收、再利用的担忧,对希望旧衣物回收箱摆放的场所等进行了调查与分析。其研究结果对废旧纺织品回收体系建设、制度及政策制定具有一定的参考价值。     

硫磺回收装置扩能改造及效果分析

介绍了回收酸性气体生产硫磺的工艺原理与工艺流程,论述了影响硫磺回收装置生产能力的诸多因素与扩能改造的情况。扩能改造后,该装置的酸性气体处理量平均为976m^3／h,瞬时处理量可达1200m^3／h,硫磺的生产能力从4450t／a提高到7500t／a,生产能力提高了68．5％,装置总硫回收率达到93．5％。     

微生物絮凝剂及其在水处理中的应用

近年来对微生物絮凝剂的研究不断深入，新的高效菌种不断被发现。简要介绍了微生物絮凝剂的絮凝机理、分关、絮凝效果及影响因素，重点介绍了新型微生物絮凝剂在水处理中的应用。     

Chemical and Microbiological Characteristics of Mineral Spoils and Drainage Waters at Abandoned Coal and Metal Mines

Mining is a long-established human activity. Abandonedmines, tailings, and mine spoils may have considerable impacton neighboring environments long after the sites are abandoned. Of greatest concern are derelict mines and wastes that generateacidic discharge waters that are enriched with iron and othermetals and metalloids. The chemistry and microbiology of thesesites are intricately intertwined. Whilst some indigenousmicroorganisms are responsible for accelerating sulfide mineraloxidation, thereby generating acidity and mobilizing metals,others catalyze reductive processes that essentially reversethese reactions and thereby ameliorate polluted mine waters.This article reviews current knowledge on the chemistry and microbiology of abandoned coal and metal mines, mine spoils and tailings.     

含氟化物及沥青的烟尘治理

铝厂排出的含有氟、氟化物、沥青的烟气及粉尘、使植物、家畜受到危害,引起氟中毒。应用沥青混凝聚装置和静电回收净化技术,既能净化有害烟气又能回收有价值的工业原料。     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

Dialdehyde starch and zein plastic: Mechanical properties and biodegradability

Dialdehyde starch (DAS) and zein, a hydrophobic corn protein, were investigated to produce biodegradable plastics with improved water resistance and mechanical properties. In the study, dialdehyde starch and zein ratio, plasticizers, and degree of starch oxidation were examined. Increased molding temperature and level of starch oxidation decreased water absorption of the plastic. Tensile strength and Young's modulus increased with starch oxidation. The biodegradation of starting materials and ground plastic specimens was studied in aerobic soil reactors maintained at 25°C for 180 days. Biodegradation of corn starch, zein, and dialdehyde starch for 180 days produced CO₂ equivalent to 64, 63, and 10% of theoretical carbon, respectively. Specimens of molded DAS and zein (3 : 1) plastic showed accelerated CO₂ evolution compared to DAS and other raw materials alone. By 180 days, specimens made with starch of low oxidation (1 and 5% oxidized) demonstrated a 60% biodegradation, and specimens with highly oxidized starch (90% oxidized) achieved 37% biodegradation.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.Journal Paper J-15927 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Project No. 3258.