Biomedical solid waste management in an Indian hospital: a case study

The objectives of this study were: (i) to assess the waste handling and treatment system of hospital bio-medical solid waste and its mandatory compliance with Regulatory Notifications for Bio-medical Waste (Management and Handling) Rules, 1998, under the Environment (Protection Act 1986), Ministry of Environment and Forestry, Govt. of India, at the chosen KLE Society's J. N. Hospital and Medical Research Center, Belgaum, India and (ii) to quantitatively estimate the amount of non-infectious and infectious waste generated in different wards/sections. During the study, it was observed that: (i) the personnel working under the occupier (who has control over the institution to take all steps to ensure biomedical waste is handled without any adverse effects to human health and the environment) were trained to take adequate precautionary measures in handling these bio-hazardous waste materials, (ii) the process of segregation, collection, transport, storage and final disposal of infectious waste was done in compliance with the Standard Procedures, (iii) the final disposal was by incineration in accordance to EPA Rules 1998, (iv) the non-infectious waste was collected separately in different containers and treated as general waste, and (v) on an average about 520 kg of non-infectious and 101 kg of infectious waste is generated per day (about 2.31 kg per day per bed, gross weight comprising both infectious and non-infectious waste). This hospital also extends its facility to the neighboring clinics and hospitals by treating their produced waste for incineration.     

Healthcare waste management: current practices in selected healthcare facilities, Botswana

Healthcare waste management continues to present an array of challenges for developing countries, and Botswana is no exception. The possible impact of healthcare waste on public health and the environment has received a lot of attention such that Waste Management dedicated a special issue to the management of healthcare waste (Healthcare Wastes Management, 2005. Waste Management 25(6) 567-665). As the demand for more healthcare facilities increases, there is also an increase on waste generation from these facilities. This situation requires an organised system of healthcare waste management to curb public health risks as well as occupational hazards among healthcare workers as a result of poor waste management. This paper reviews current waste management practices at the healthcare facility level and proposes possible options for improvement in Botswana.     

Indicators of waste management efficiency related to different territorial conditions

The amount of waste produced and the control of separate collection are crucial issues for the planning of a territorial Integrated Waste Management System, enabling the allocation of each sorted waste fraction to the proper treatment and recycling processes. The present study focuses on assessing indicators of different waste management systems in areas characterized by different territorial conditions. The investigated case study concerns the municipalities of Emilia Romagna (northern Italy), which present a rather uniform socioeconomic situation, but a variety of geographic, urban and waste management characteristics. A survey of waste generation and collection rates was carried out, and correlated with the different territorial conditions, classifying the municipalities according to altitude and population density. The best environmental performances, in terms of high separate collection rate, were found on average in rural areas in the plain, while the lowest waste generation was associated with rural hill towns.     

Evaluation of practicing safety features for hospital waste collection among Iran’s public hospitals

Journal of Material Cycles and Waste Management - Hospital waste management is imperative due to its impending health hazards. This study was meant to evaluate the strong safety awareness of...     

The willingness to household waste disposal practices of residents in rural China

Journal of Material Cycles and Waste Management - The increasing amount of household waste is becoming one of the major challenges in the sustainable development of rural areas in China. As most...     

Comparison of LLW Disposal Facilities at Major Department of Energy Sites

Near surface disposal facility design and management are examined and compared using a systems approach that defines facility performance as a function of three components (or subsystems): the disposal facility design (cover systems and bottom liners); the properties of the waste (waste composition, waste form and waste package); and the site‐specific environmental features (climate, geology, and hydrology). We report an evaluation of five DOE near surface disposal facility case studies, selected to provide a “representative” sample that included disposal sites with a range of waste and environmental characteristics across the DOE. The facilities selected were the Savannah River E‐Area Engineered Trenches, Hanford Integrated Disposal Facility, Idaho Radioactive Waste Management Complex, Oak Ridge Environmental Management Waste Management Facility, and Nevada National Security Site Area 5. ©2015 Wiley Periodicals, Inc.     

Mercury waste management in China: implications on the implementation of the Minamata Convention on Mercury

Journal of Material Cycles and Waste Management - Existing management standards in China for mercury waste classification and disposal and those of the Minamata Convention on Mercury (the...     

Tertiary recycling of plastics waste: an analysis of feedstock,chemical and biological degradation methods

Journal of Material Cycles and Waste Management - Globally, there is rising awareness of the severity of the plastic waste problem, and the implications of plastics accumulation in the environment....     

Identifying key factors influencing sustainable element in healthcare waste management using the interval-valued fuzzy DEMATEL method

Journal of Material Cycles and Waste Management - With the rapid growth of healthcare waste and improvement of people’s environment awareness, the sustainability of healthcare waste...     

Report: policy drivers and the planning and implementation of integrated waste management in Ireland using the regional approach.

Waste management in Ireland has been dramatically transformed over the past 10 years from over 90% reliance on landfill towards a fully integrated approach. According to the latest EPA National Database Report in 2007 our municipal (household and commercial but excluding construction and demolition) recycling rate was 35% in 2005. This has been achieved through the implementation of 10 regional waste management plans all prepared within a new national planning framework in accordance with the Waste Management Act 1996 and Government policy document 'Changing Our Ways', published in 1998 by the Irish Department of the Environment, Heritage and Local Government. The principal drivers of the waste management plans and strategies are the EU Waste Framework Directive (recently revised), the EU Packaging Directive and the EU Landfill Directive. In addition, there were substantial political and environmental drivers due to the relatively poor standard of landfills in Ireland. Strict landfill regulation by the Environment Protection Agency commenced in 1997and led to many closures of poor facilities and new standards of siting design and operation. This has led to very high landfill charges that are only now beginning to stabilize. The key to improving public attitudes to the greatly improving waste management system has been the degree and content of stakeholder involvement programmes. These programmes are now consolidated into a national 'Race against Waste' programme (www.raceagainstwaste.ie). The purpose of the programme is to create awareness and deal with many of the misconceptions in the public mind attached to waste treatment methods especially incineration. Waste management is after all about people.     

Towards zero waste in emerging countries - a South African experience

The aim of this paper is to describe the optimisation of Waste Minimisation/Zero Waste strategies into an already established integrated waste management system and to present a Zero Waste model for post-consumer waste for urban communities in South Africa. The research was undertaken towards the fulfilment of the goals of the Polokwane Declaration on Waste Management [DEAT, 2001. Department of Environmental Affairs and Tourism, Government of South Africa. Polokwane Declaration. Drafted by Government, Civil Society and the Business Community. National Waste Summit, Polokwane, 26-28 September 2001], which has set as its target the reduction of waste generation and disposal by 50% and 25%, respectively, by 2012 and the development of a plan for Zero Waste by 2022. Two communities, adjacent to the Mariannhill Landfill site in Durban, were selected as a case study for a comparative analysis of formal and informal settlements. Since the waste generated from these two communities is disposed of at the Mariannhill landfill, the impact of Zero Waste on landfill volumes could be readily assessed. A Zero Waste scheme, based on costs and landfill airspace savings, was proposed for the area. The case study demonstrates that waste minimisation schemes can be introduced into urban areas, in emerging countries, with differing levels of service and that Zero Waste models are appropriate to urban areas in South Africa.     

Addressing sustainability through waste management: a perspective from higher education institutions in Southeast Asia

Journal of Material Cycles and Waste Management - Waste management is vital for global sustainable development. Sustainable development goals of a country would not be achieved if the waste...     

4R of rubber waste management: current and outlook

Journal of Material Cycles and Waste Management - Excessive accumulation of rubber waste necessitates the need to revisit the effectiveness of the existing rubber waste management system. This...     

Healthcare waste management in Botswana: storage,collection, treatment and disposal system

Journal of Material Cycles and Waste Management - Healthcare waste management has become a major issue of concern for solid waste managers due the treatment of healthcare waste being generated and...     

Municipal solid waste generation in China: influencing factor analysis and multi-model forecasting

Journal of Material Cycles and Waste Management - In the developing countries, the inadequacy of basic waste data is a significant obstacle for municipal solid waste management. To evaluate an...     

Electrical and electronic equipment consumption pattern and e-waste disposal behaviour of individuals and households in India

Journal of Material Cycles and Waste Management - Despite electronic waste (e-waste) rules in force, there is still a huge gap in awareness among communities about the handling of discarded...     

COVID-19 effects on municipality waste collection services for households: statistical modelling of perspectives from Guyana and Nigeria

Journal of Material Cycles and Waste Management - The novel COVID-19 pandemic has disrupted the functioning of solid waste management globally as households experience an increase in their waste...     

Waste landfill plant and waste disposal plant efficiencies in China

Journal of Material Cycles and Waste Management - As resident awareness of environmental issues has grown, waste disposal has become an important part of urban environmental governance. Most...