Environmental Management of Quarries as Waste Disposal Facilities

Problems associated with the disposal of municipal solid waste have become a source of public concern worldwide as awareness of potential adverse environmental impacts and health threats from solid waste has increased. Communities are concerned about the generation and management of solid waste to the extent of refusing to allow new disposal facilities near their homes, often after witnessing the legacy of existing facilities. Under these conditions, the development of national policies for the management of solid waste becomes highly political, all while requiring appropriate technical solutions that ensure environmental protection and proper management plans that support an acceptable solution for the disposal of municipal solid waste. In some locations, the conversion of old quarries into well-engineered and controlled landfills appears as a promising solution to a continuously increasing problem, at least for many decades to come. This paper describes the environmental impacts associated with solid waste disposal in a converted quarry site and the mitigation measures that can be adopted to alleviate potential adverse impacts. Environmental management and monitoring plans are also discussed in the context of ensuring adequate environmental protection during and after the conversion process.     

Open waste burning in Cameroonian cities: an environmental impact analysis

Lack of technology and efficient management of solid waste coupled with poverty have motivated most developing countries to sort for cheap waste disposal methods with negative consequences on the environment. Open burning at waste dumps causes serious toxicological impacts. Most organic solid waste excluding plastics when burned cause considerably little environmental pollution. However, non-stoichiometric combustion of waste plastics produces significant amounts of various aliphatic and aromatic compounds, acidic gases, dust and smoke. These products pollute the air, water and soil generating significant health problems with related socioeconomic impacts on human, animals and plants. Some of these pollutants are toxic and/or carcinogenic, form acid-rain and influence climate change. Critical discourse and research on environmental toxicology resulting from air pollution with related health risk and impacts have been catalysed by the enactment of major environmental regulations and increased awareness. The new clean air act amendment of 1990 is estimated to require about $25billion annually for its implementation in the United States, indicating the gravity of the pollution problem. Understanding, controlling and mitigating the impacts of chemical pollution from multiple sources related to open burning of plastics is complex. This paper uses content analysis of relevant literature and field observations to analyse, evaluate and identify characteristic pollutants including their transmission potentials, sources and impacts on human health with the assessment, prevention and management of related risk. An affordable technology-based approach applied within a bottom-up management strategy to prevent and control pollution offers a sustainable solution underpinned by resource and energy recovery from waste.     

Health is wealth: Concern for households’ solid waste self‐disposal practices

This study examines the challenges posed by solid waste by assessing the disposal methods practiced by residents in the Ijebu‐Ode Local Government Area (LGA) in Ogun State, Nigeria. Primary data were obtained through questionnaire administration. One out of every 10 houses was selected for sampling in six randomly selected wards of Ijebu‐Ode LGA. Three hundred and twelve questionnaires were administered on heads of households. Information elicited from the respondents covered solid waste disposal practices, the rationales behind those practices, and the respondents’ perceptions of environmental problems, including environmental health problems that could emanate from such practices. Data on environmental problems and environmental health problems measured on a 5‐point Likert scale were analyzed using Aggregate Weighted Mean Index. The computed Environmental Problem Indices (EPIs) and Environmental Health Problem Indices (EHPIs) were used to determine the severity of the respective challenges. The results established that blockage of drains with an EPI of 4.15 was a very severe environmental problem and flood hazard with an EPI of 3.55 was a severe environmental problem resulting from solid waste disposal practices. Incidence of malaria and cholera, with EHPIs of 2.85 and 2.56, respectively, were however ranked as not severe environmental health problems. The study concluded that solid waste disposal practices in Ijebu‐Ode LGA were unhygienic and unsafe, hence the need for government intervention to ensure the adoption of the necessary measures toward a safe and healthy environment.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

Assessing environmental impacts of municipal solid waste of Johor by analytical hierarchy process

The views of the public on solid waste bound to be generated in Johor Bahru Malaysia are presented and appraised. This is because of the massive development currently going on to transform the city to an international standing by the year 2025. For this reason, attempts to raise stakeholder awareness on the need to embrace on how best to manage the current problem with reduced impacts to the environment currently and in the future was attempted. Data were collected through contacts and questionnaire survey. Analytical hierarchy process (AHP) technique was used to structure and assess the views and judgments of stakeholders on the environmental impacts of solid waste disposal. SuperDecision software was used to generate and compute results of stakeholder's judgments. The assessment revealed that fauna and flora, habitat depletion and land use among the criteria are most critical environmental impacts. Landfilling, recycling, incineration and composting were evaluated in terms of the environmental impacts. The choice of incineration is perceived to improve environmental visibility, preserves fauna and flora as well as stream ecology, improves environmental air quality and optimizes land use. Similarly, recycling of waste, is perceived to preserves fauna and flora, stream ecology, habitat depletion, improves air quality as well as land use. Composting is perceived to be the best option in terms of preservation of stream ecology, habitat depletion and land use practice. Landfill generates less noise and vibration but found to be responsible for more than 50% of the environmental impacts created by solid waste in this area. Composting and recycling are mostly preferred to landfilling and incineration and the reason why this is so was provided. The study also identified challenges ahead and highlights that benefits attached to some vital disposal options (such as incineration) are yet to be fully implemented.     

固体废物全过程管理中固体废物鉴别研究

对固体废物应进行全过程管理,固体废物鉴别是固体废物全过程管理的基础和关键,包括依据产生来源鉴别和过程鉴别两种方法,依据产生来源鉴别包括丧失原有利用价值的物质、在生产过程中产生的副产物、环境治理和污染控制过程中产生的物质、其他物质四类,在每一类中详细地列举了属于该产生来源的具体固体废物种类名称,便于理解和增强可操作性。过程鉴别包括在固体废物再生利用过程和处置过程中的固体废物鉴别两类,其中在再生利用过程的固体废物鉴别中明确指出了固体废物再生利用产物只有同时满足产品质量标准要求、国家污染控制标准要求以及有实际市场需求、固定用户等条件时,才不作为固体废物管理,在处置过程的固体废物鉴别中具体地列出了处置固体废物全过程中仍然作为固体废物管理的国际惯用处置方式。同时,给出了清晰的"原料—产品—固体废物—处置或产品"全过程中固体废物的产生节点和相应的固体废物类别图,为固体废物鉴别工作提供参考,使固体废物全过程管理有的放矢,有效防止固体废物对环境和人体健康造成的危害。     

Comparative risk analysis for metropolitan solid waste management systems

Conventional solid waste management planning usually focuses on economic optimization, in which the related environmental impacts or risks are rarely considered. The purpose of this paper is to illustrate the methodology of how optimization concepts and techniques can be applied to structure and solve risk management problems such that the impacts of air pollution, leachate, traffic congestion, and noise increments can be regulated in the long-term planning of metropolitan solid waste management systems. Management alternatives are sequentially evaluated by adding several environmental risk control constraints stepwise in an attempt to improve the management strategies and reduce the risk impacts in the long run. Statistics associated with those risk control mechanisms are presented as well. Siting, routing, and financial decision making in such solid waste management systems can also be achieved with respect to various resource limitations and disposal requirements.     

Industrial-waste management in developing countries: the case of Lebanon

This paper presents a critical assessment of the existing Lebanese industrial sector, namely the current status and classification of industrial establishments based on a comparative synthesis and analysis of recent nationwide surveys and studies pertaining to industrial-waste management. Characterisation of solid and liquid industrial wastes generated, including hazardous wastes, is presented together with current and projected waste loads, recycling opportunities, and export/import practices. Institutional capacity and needs pertaining to the enforcement of relevant environmental legislation, staffing and resources, monitoring schemes, and public participation are critically evaluated. Finally, realistic options for industrial-waste management in the context of country-specific institutional economic and technical limitations are outlined. The industrial sector in Lebanon consists of small-scale industries (84% employ less than 10 persons), primarily involved in light manufacturing (96%). These industries which are distributed among 41 ill-defined zones and deficient in appropriate physical infrastructure, generate solid, liquid, and hazardous waste estimated at 346,730 tons/year, 20,169,600 m3/year and between 3000 to 15,000 tons/year, respectively. Although the growth of this sector contributes significantly to the socio-economic development of the country (industry accounts for 17% of the gross domestic product), in the absence of a comprehensive environmental management plan, this expansion may not be sustained into the coming millennium. The anticipated expansion will inevitably amplify adverse environmental impacts associated with industrial activities due to rising waste volumes and improper waste handling and disposal practices. These impacts are further aggravated by a deficient institutional framework, a lack of adequate environmental laws, and lax enforcement of regulations governing industrial-waste management.     

Medical waste management in Korea

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.     

Critical review of industrial and medical waste practices in Dar es Salaam City

Industrial and medical wastes constitute a larger part on what is known as ‘hazardous wastes’. The production of these wastes is and will continue to be an on going phenomenon as long as human civilization persists. The health impacts of direct and indirect exposure to hazardous wastes include carcinogenic effects, reproductive system damage, respiratory effects, central nervous system effects, and many others. Today, many developed countries have legal provisions with regard to proper management of hazardous wastes. Tanzania, like many developing countries, has little emphasis on the proper handling and disposal of hazardous wastes. There is a serious inadequacy in handling industrial and medical solid wastes in the Dar es Salaam City. Improper waste deposition is increasingly becoming a potential public health risk and an environmental burden. Due to poor control of waste, industrialists and hospital owners are not well checked on how they handle and dispose of the wastes they produce with the result that many hazardous wastes reach the Vingunguti dumpsite without notice. Data on waste generation in Dar es Salaam is also inadequate, making it difficult to plan an efficient solid waste system. Promotion of public awareness, legislation and regulations enforcement and establishment of a proper sanitary landfill are considered to be principal remedial measures to ensure sound environmental maintenance. This paper summarizes the findings of the study on the practices of industrial and medical waste management in Dar es Salaam. The author aims to express the inadequacy in hazardous waste management and suggests possible measures to be applied in order to rectify the situation.     

An inexact dynamic optimization model for municipal solid waste management in association with greenhouse gas emission control

Municipal solid waste (MSW) should be properly disposed in order to help protect environmental quality and human health, as well as to preserve natural resources. During MSW disposal processes, a large amount of greenhouse gas (GHG) is emitted, leading to a significant impact on climate change. In this study, an inexact dynamic optimization model (IDOM) is developed for MSW-management systems under uncertainty. It grounds upon conventional mixed-integer linear programming (MILP) approaches, and integrates GHG components into the modeling framework. Compared with the existing models, IDOM can not only deal with the complex tradeoff between system cost minimization and GHG-emission mitigation, but also provide optimal allocation strategies under various emission-control standards. A case study is then provided for demonstrating applicability of the developed model. The results indicate that desired waste-flow patterns with a minimized system cost and GHG-emission amount can be obtained. Of more importance, the IDOM solution is associated with over 5.5 million tonnes of TEC reduction, which is of significant economic implication for real implementations. Therefore, the proposed model could be regarded as a useful tool for realizing comprehensive MSW management with regard to mitigating climate-change impacts.     

城市生活垃圾处理能力提升的驱动因素研究——基于2004—2020年30个省份的实证分析

提升末端生活垃圾处理能力,走出城市“垃圾围城”之困,一直是地方政府关切的核心议题。为探究城市生活垃圾处理能力的影响因素及其时空差异,从“政府能力系统”视角出发,围绕需求驱动、经济驱动、政策驱动、技术驱动四个维度,提出相关研究假设,并运用2004—2020年30个省份的面板数据进行实证检验。研究发现：生活垃圾清运量、人均GDP、地方环保支出、政策文本出台数量、无害化处理厂数量以及市容环卫专用车辆数均对城市生活垃圾处理能力的提升具有促进作用。在时间变化上,2004—2007年为生活垃圾处理能力初创阶段,受到经济、政策与技术驱动因素的显著影响; 2008—2016年为生活处理能力缓慢提升和局部发展阶段,持续受到技术驱动因素的显著作用;2017—2020年为处理能力全面提升阶段,需求、经济与技术因素均呈现出显著促进作用。在区域变化上,经济驱动的影响效应由东部向西部逐渐减弱,需求驱动、政策驱动因素只在东部地区影响显著,技术驱动因素对不同区域的生活垃圾处理能力均具有显著促进作用。最后,研究从源头减量、资金投入、政策倾斜与技术创新等方面,对促进中国城市生活垃圾处理能力的发展提供了相应的政策建议。     

废旧电脑拆解工艺与资源化案例研究

以某再生资源公司的废旧电脑拆解为案例进行研究,介绍了工艺技术、拆解回收各种资源的数据。研究结果表明,我国废旧电脑人工拆解-破碎-冶炼相结合的工艺,是电子废弃物循环利用、资源高效回收、减少环境风险的较好工艺技术,符合固废处理的3R(替代、减少、优化)原则。     

Hazardous waste indicators for national decision makers

Indicators and indices are important tools that assist decision makers to formulate and implement plans for management at local, national and international levels. Four indicators for hazardous waste management are described that have recently been adopted within the United Nations framework of Indicators of Sustainable Development. Although these four indicators will be useful tools, the need for a broader range of policy-relevant qualitative and quantitative indicators, proxy indicators and indices is outlined. The argument is advanced that in order for all nations to better manage the range of hazardous waste issues, including waste generation, export/import and disposal, a set of innovative indicators and indices is required. Useful indicators and indices are described that could be used to link and quantify likely environmental, ecosystem and health impacts and risks especially from hazardous waste disposal. Indicators are also suggested that could be used to illustrate the shift in industrial strategy away from end-of-pipe processes towards waste recycling, cleaner production and integrated life-cycle analysis. It was concluded that until the lack of reliable and harmonized data on hazardous waste is addressed, indicator development and use by national and international decision makers cannot readily be implemented.     

Environmental and economic impact assessment of construction and demolition waste disposal using system dynamics

Construction and demolition wastes (CDW) have increasingly serious problems in environmental, social, and economic realms. There is no coherent framework for utilization of these wastes which are disposed both legally and illegally. This harms the environment, contributes to the increase of energy consumption, and depletes finite landfills resources. The aim of this paper is to evaluate the impacts of two alternatives for the management of CDW, recycling and disposing. The evaluation is carried out through developing a dynamic model with aid STELLA software by conducting the following steps: (1) quantifying the total cost incurred to mitigate the impacts of CDW landfills and uncollected waste on the environment and human health; (2) quantifying the total avoided emissions and saved energy by recycling waste; (3) estimating total external cost saved by recycling waste and; (4) providing a decision support tool that helps in re-thinking about waste disposal. The proposed evaluation methodology allows activating the stringent regulations that restrict waste disposal and developing incentives to encourage constructors to recycle their wastes. The research findings show that recycling CDW leads to significant reductions in emissions, energy use, global warming potential (GWP), and conserves landfills space when compared to disposal of wastes in landfills. Furthermore, the cost of mitigating the impact of disposal is extremely high. Therefore, it is necessary to recycle construction and demolition wastes.     

低中放废物处置FEPs清单的构建——以飞凤山处置场为例

识别所有影响其长期安全的有关因素,即特征(Features)、事件(Events)和过程(Processes)(FEPs),是放射性废物处置场安全全过程系统分析的关键过程之一。我国目前低中放固体废物处置环境影响评价中未开展FEPs识别和景象开发。拟以飞凤山处置场为例,选择自下而上方法的构建方法,对如何建立我国的低中放废物处置FEPs清单进行了探讨。并以最新发布的NEA国际FEPs清单(3.0版)中提出的基于外部因素和处置组成(废物包、处置场、岩石圈和生物圈)的分类方案为基础,结合飞凤山处置场的近地表处置及其环境特征,建立了该处置场的FEPs清单。     

北京市垃圾填埋场地下水中砷、汞含量分析

生活垃圾的处置一直以填埋为主,垃圾填埋承载着巨大的环境压力,尤其是垃圾填埋产生的渗滤液会对地下水造成砷、汞污染。为了解北京市生活垃圾填埋场地下水砷、汞污染水平,在北京市5座生活垃圾填埋场布设采样点,采集36个地下水样品,采用氢化物发生-原子荧光法,分析了地下水砷、汞含量特征。结果表明,36个地下水样品砷浓度范围0.41~4.82μg/L,汞浓度范围0.024~0.121μg/L,北京市典型垃圾填埋场地下水样品不存在砷、汞污染问题。     

A comparative analysis of the psychosocial impacts of waste disposal facilities

This paper reports the results of a comparative analysis of the psychosocial impacts of municipal solid waste disposal facilities (both landfills and incinerators) in six communities in the provinces of Ontario and British Columbia, Canada. Telephone surveys were administered to random samples of residents living around each facility between 1990 and 1995 (total n=1203). The results of logistic regression analyses show that type of facility was the strongest predictor of residents' awareness, concern, and actions taken in response to site concerns. Essentially, residents living in close proximity to a landfill had a higher probability of reporting awareness, concern or actions than residents living around an incinerator site. There was little evidence of differences in reactions between Ontario and British Columbia (BC) residents, despite variations in provincial policies on waste disposal. The effects of other predictors, with the exception of involvement in the local community, were not consistent, supporting previous findings that the determinants of facility impacts are outcome‐specific. It is essential that environmental managers take this constellation of factors into account in the operation of existing, or siting of new, facilities.     

Use of recycled products in UK construction industry: An empirical investigation into critical impediments and strategies for improvement

Construction industry consumes about half of all material resources taken from nature, and generates a large portion of waste to landfill. A way of tackling negative environmental impacts impending from continuous material extraction and waste generation is the use of recycled materials for construction projects. However, the use of recycled materials is yet to become a commonplace in construction industry. This study evaluates the factors hampering the use of recycled products in UK construction industry as well as strategies that could be adopted to enhance its use in the industry. In order to identify the impediments and critical strategies, a two-fold methodical approach was used. An unstructured interview preceded a quantitative questionnaire survey which was used to elicit broader industry practitioners’ opinion.The study shows that designers rarely specify recycled products. This is due to lack of adequate information about quality and market availability of the products, negative perception from clients, and unexpectedly high cost of the products, despite its perceived low quality. The study suggests that a number of strategies could be adopted to promote the use of the products. These include allocation of points to the use of recycled products in sustainable design appraisal tools, governments legislative measures, improved collaboration between designers, contractors and materials suppliers, contractors involvement at earlier stage of design, improved education of the professionals about the products, and the use of tax break to influence the cost of the products. The findings of this study would therefore help policy makers, manufacturers and construction professionals to identify the factors hampering the use of recycled products for construction projects as well as the strategies that could be adopted in order to create market for the products.     

Euro-trash: searching Europe for a more sustainable approach to waste management

How an economically affordable, environmentally effective and socially acceptable municipal solid waste management system can be developed is currently unclear. Considerable research has been carried out on the practical aspects of municipal waste management (i.e. transport, treatment and disposal) and how citizens feel about source separation, recycling, incineration and landfill but the perspective of the waste manager within the context of long term planning is often ignored. In this study, waste managers from 11 different leading-edge European municipal solid waste programs in nine different countries were interviewed. The economic, social, political, environmental, legal and technical factors of their specific programs were explored and analyzed. The transition of municipal solid waste management to urban resources management was observed and key ‘system drivers’ for more sustainable waste management practices were identified. Programs visited were: Brescia (I), Copenhagen (DK), Hampshire (UK), Helsinki (FI), Lahn-Dill-Kreis (D), Malmö (SE), Pamplona (E), Prato (I), Saarbrücken (D), Vienna (A), and Zürich (CH).