Insights into the mercury(II) adsorption and binding mechanism onto several typical soils in China

To better understand the Hg(II) adsorption by some typical soils and explore the insights about the binding between Hg(II) and soils, a batch of adsorption and characteristic experiments was conducted. Results showed that Hg(II) adsorption was well fitted by the Langmuir and Freundlich. The maximum adsorption amount of cinnamon soil (2094.73 mg kg^?1) was nearly tenfold as much as that of saline soil (229.49 mg kg^?1). The specific adsorption of Hg(II) on four soil surface was confirmed by X-ray photoelectron spectroscopy (XPS) owing to the change of elemental bonding energy after adsorption. However, the specific adsorption is mainly derived from some substances in the soil. Fourier transform infrared spectroscopy (FTIR) demonstrated that multiple oxygen-containing functional groups (O–H, C=O, and C–O) were involved in the Hg(II) adsorption, and the content of oxygen functional groups determined the adsorption capacity of the soil. Meanwhile, scanning electron microscopy combined with X-ray energy dispersive spectrometer (SEM–EDS) more intuitive revealed the binding of mercury to organic matter, metal oxides, and clay minerals in the soil and fundamentally confirmed the results of XPS and FTIR to further elucidate adsorptive phenomena. The complexation with oxygen-containing functional groups and the precipitation with minerals were likely the primary mechanisms for Hg(II) adsorption on several typical soils. This study is critical in understanding the transportation of Hg(II) in different soils and discovering potential preventative measures.     

Experimental Zn(II) retention in a sandy loam soil by very small columns

The use of column experiments, usually performed to better approximate field conditions, may provide information that is not available from batch experiments. In such experiments heavy metals are often adsorbed until saturation followed by desorption experiments. When the affinity of the metal to soil is high, the retention factor (R) could be greater than thousands and the duration of experiments can become impractically long. In order to use reasonable laboratory time, the flow rate should be increased or the column size decreased. The increase in flow rate produces undesirable kinetic and dispersion effects, so we used very small soil columns (pore volume = 0.31–0.70 ml) and relatively high flow rates (0.03–0.12 ml min⁻¹) in studies of Zn(II) adsorption and retention in soils. Conservative tracer flow column experiments under saturation conditions were carried out to determine flow parameters for different flow rates. Column pore volume (V_p), Peclet numbers (Pe) and longitudinal dispersion coefficients (D_L) were determined from breakthrough curves. The effect of type of electrolyte and ionic strength on the Zn(II) retention onto soil was determined. The influence of flow rate and bed height on the retention coefficient and on the mass transfer zone was also studied. The effect of different influent Zn(II) concentrations on the R values obtained was analyzed. Freundlich parameters from column experiments were compared with batch ones. The leaching efficiency of different electrolytes, salts of weak organic acids and EDTA was also studied.     

Mercury conversion processes in Amazon soils evaluated by thermodesorption analysis

This paper reports on the speciation study and the Hg redox behavior in Amazon soils not influenced by gold mining and collected near Manaus, AM, Brazil. The samples were incubated by adding Hg(0) and HgCl₂ to dry soil. Solid phase Hg speciation analysis was carried out using a Hg thermodesorption technique with the aim of distinguishing elemental Hg(0) from Hg(II) binding forms. In the first case, we observed the conversion of Hg(0) to Hg(II) binding forms in the range of 28–68% and a correlation between the percent of oxidation and OM content. Samples incubated with Hg(II) showed the formation of Hg(I) and/or Hg(0) in the range of 19–69%. The lowest values corresponded to the samples with the lowest clay contents. The kinetics of conversion of Hg(0) as well as HgCl₂ were roughly fitted to the two first order reactions, a fast one and a slow one. It was not possible to evaluate differences between sampling sites and types of soils, but the mean half-life of the first order reaction obtained by the addition of Hg(II) was slower (t_1/2 = 365 d) than the one obtained by the addition of Hg(0) (t_1/2 = 148 d). Previous studies have shown the predominance of organically bound Hg in these samples. Thus, the kinetic difference between Hg oxidation and reduction in combination with the efficient retention processes by OM may explain the high background values found in Amazon soils.     

Effects of soil properties on heavy metal accumulation in flowering Chinese cabbage (Brassica campestris L. ssp. chinensis var. utilis Tsen et Lee) in Pearl River Delta,China

This study was conducted to investigate the effects of soil properties on the heavy metal accumulation in flowering Chinese cabbage (Brassica campestris L. ssp. chinensis var. utilis Tsen et Lee) at the field scale. The concentrations of cadmium (Cd), mercury (Hg), and chromium (Cr) in topsoil and vegetable samples from Nanhai district of Foshan city in the Pearl River Delta (PRD) were analyzed. The results showed that 56.5% of the soil samples exceeded the grade II of the Chinese Soil Environmental Quality Standard (GB 15618-1995) for Hg concentrations, while 8.70% and 17.4% of the vegetable samples exceeded the criteria of the Chinese Safety Qualification of Agricultural Products (GB 18406.1-2001) for Cd and Hg concentrations, respectively. The calculated bio-concentration factor (BCF; i.e., the ratio of the metal concentration in the edible parts of flowering Chinese cabbage to that in soil) values were ranked as: Cd (0.1415) > Cr (0.0061) > Hg (0.0012) (p < 0.01), which demonstrated that Cd was easier to be accumulated in the edible parts of flowering Chinese cabbage than Hg and Cr. Furthermore, the following relationships between (bio-concentration factor) BCF values (BCFs) and soil physicochemical properties were concluded from our results: i) the mean BCFs of coarse-textured soils were higher than those of fine-textured soils; ii) the BCFs decreased with increasing soil pH; iii) the soils with high organic matter(OM) and Cation exchange capacity (CEC) have low BCFs, resulting from their high sorption capacities for Cd, Hg, and Cr. The stepwise linear multiple regression analyses showed that total metal concentrations and available calcium in soils were two main factors controlling the accumulation of Cd, Hg, and Cr in the flowering Chinese cabbage.     

Effects of soil properties on heavy metal accumulation in flowering Chinese cabbage (Brassica campestris L. ssp. chinensis var. utilis Tsen et Lee) in Pearl River Delta, China

This study was conducted to investigate the effects of soil properties on the heavy metal accumulation in flowering Chinese cabbage (Brassica campestris L. ssp. chinensis var. utilis Tsen et Lee) at the field scale. The concentrations of cadmium (Cd), mercury (Hg), and chromium (Cr) in topsoil and vegetable samples from Nanhai district of Foshan city in the Pearl River Delta (PRD) were analyzed. The results showed that 56.5% of the soil samples exceeded the grade II of the Chinese Soil Environmental Quality Standard (GB 15618-1995) for Hg concentrations, while 8.70% and 17.4% of the vegetable samples exceeded the criteria of the Chinese Safety Qualification of Agricultural Products (GB 18406.1-2001) for Cd and Hg concentrations, respectively. The calculated bio-concentration factor (BCF; i.e., the ratio of the metal concentration in the edible parts of flowering Chinese cabbage to that in soil) values were ranked as: Cd (0.1415) > Cr (0.0061) > Hg (0.0012) (p < 0.01), which demonstrated that Cd was easier to be accumulated in the edible parts of flowering Chinese cabbage than Hg and Cr. Furthermore, the following relationships between (bio-concentration factor) BCF values (BCFs) and soil physicochemical properties were concluded from our results: i) the mean BCFs of coarse-textured soils were higher than those of fine-textured soils; ii) the BCFs decreased with increasing soil pH; iii) the soils with high organic matter(OM) and Cation exchange capacity (CEC) have low BCFs, resulting from their high sorption capacities for Cd, Hg, and Cr. The stepwise linear multiple regression analyses showed that total metal concentrations and available calcium in soils were two main factors controlling the accumulation of Cd, Hg, and Cr in the flowering Chinese cabbage.     

Effect of four alcohols on adsorption, desorption, and movement of cadmium, nickel, and zinc through soils

Miscible-displacement experiments were conducted to compare the effects of aqueous soil solutions with ethyl alcohol, ethylene glycol, diethylene glycol, and triethylene glycol on the movement of metals through soils. Aqueous or alcohol solutions containing 1 mM each Cd, Ni, and Zn and 5 mM Ca were perfused through columns containing River Sand, Canelo loam (Canelo 1) or Mohave sandy clay loam (Mohave scl) until effluent metal concentrations (C) equaled influent concentrations (C₀) or CC₀⁻¹ = 1. In general, the order of sorption was Zn > Ni > Cd in aqueous-perfused columns, while in alcohol-perfused columns sorption of Ni Cd ≥ Zn. In comparison to aqueous solutions, alcohols reduced total metal sorption by at least 25%. Metal sorption was best correlated to cation exchange capacity of the soil, sorption of metals being greatest in the Mohave scl and least in the River Sand. After CC₀⁻¹ = 1 was reached, columns were leached with deionized water. While leaching did not affect the sorption of metals in columns which had been perfused with aqueous solvents, sorption behavior of metals changed significantly in columns which had been perfused with alcohol solvents. Leaching caused desorption of 5 to 30% of the sorbed Ni. In general, Cd was desorbed (up to 45%) from the soils tested. The exceptions were River Sand columns perfused with diethylene and triethylene glycol in which additional Cd was sorbed to the soil from the soil solution. Additional Zn was sorbed in all columns tested with the exception of the Canelo 1 column perfused with ethyl alcohol.     

Study of sorption kinetics of some ionic liquids on different soil types

In the present contribution sorption kinetics experiments under static conditions were utilized in three selected ionic liquids cations (1-ethyl-3-methylimidazolium, 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium chlorides) study with five type of soil, differing in total organic carbon (TOC) content. The experimental results indicate the sorption capacity growth with increase in TOC content and hydrophobicity of ionic liquid cation. The obtained kinetic sorption parameters as well as distribution coefficients (K_d) were used to estimate the sorption properties of the soil types towards the ionic liquids in question. The Gibbs free energy values indicate that ionic liquid cations sorption on soils could be generally considered as a physical adsorption with exothermic effect. But the values of −dG for studied cations sorption on soil with very high of TOC content in soil (45%) may testify to nature of chemical adsorption. Sorption of the analyzed compounds occurs probably by means of hydrogen bonds, electrostatic and π  π interaction with the organic matter and the clay minerals of the soils.     

Relationship between the loading rate of inorganic mercury to aquatic ecosystems and dissolved gaseous mercury production and evasion

The purpose of our study was to test the hypothesis that dissolved gaseous mercury (DGM) production and evasion is directly proportional to the loading rate of inorganic mercury [Hg(II)] to aquatic ecosystems. We simulated different rates of atmospheric mercury deposition in 10-m diameter mesocosms in a boreal lake by adding multiple additions of Hg(II) enriched with a stable mercury isotope (²⁰²Hg). We measured DGM concentrations in surface waters and estimated evasion rates using the thin-film gas exchange model and mass transfer coefficients derived from sulfur hexafluoride (SF₆) additions. The additions of Hg(II) stimulated DGM production, indicating that newly added Hg(II) was highly reactive. Concentrations of DGM derived from the experimental Hg(II) additions (“spike DGM”) were directly proportional to the rate of Hg(II) loading to the mesocosms. Spike DGM concentrations averaged 0.15, 0.48 and 0.94 ng l⁻¹ in mesocosms loaded at 7.1, 14.2, and 35.5 μg Hg m⁻² yr⁻¹, respectively. The evasion rates of spike DGM from these mesocosms averaged 4.2, 17.2, and 22.3 ng m⁻² h⁻¹, respectively. The percentage of Hg(II) added to the mesocosms that was lost to the atmosphere was substantial (33–59% over 8 weeks) and was unrelated to the rate of Hg(II) loading. We conclude that changes in atmospheric mercury deposition to aquatic ecosystems will not change the relative proportion of mercury recycled to the atmosphere.     

Studies on the sorption and desorption characteristics of Zn(II) on the surface soils of nuclear power plant sites in India using a radiotracer technique

Zinc adsorption was studied in the soils of three nuclear power plant sites of India. 65Zn was used as a radiotracer to study the sorption characteristics of Zn(II). The sorption of zinc was determined at 25 and 45 degrees C at pH 7.8+/-0.2 in the solution of 0.01 M Ca(NO3)2 as supporting electrolyte. The sorption data was tested both in Freundlich and Langmuir isotherms and could be described satisfactorily. The effect of organic matter and other physico-chemical properties on the uptake of zinc was also studied in all the soil samples. The results showed that the cation exchange capacity, organic matter, pH and clay content were the main contributors to zinc sorption in these soils. The adsorption maximum was found to be higher in the soil on Kakarpara Atomic Power Plant sites soils having high organic matter and clay content. The zinc supply parameters of the soils are also discussed. In the desorption studies, the sequential extraction of the adsorbed zinc from soils showed that the diethylene triamine penta acetic acid extracted maximum amount of adsorbed zinc than CaCl2 and Mg(NO3)2. The zinc sorption on the soil and amount of zinc retention after extractants desorption shows a positively correlation with vermiculite and smectite mineral content present in the clay fraction of the soil. The amount desorbed by strong base (NaOH) and demineralised water was almost negligible from soils of all the sites, whereas the desorption by strong acid (HNO3) was 75-96% of the adsorbed zinc.     

Immobilization of mercury by pyrite (FeS2)

Elemental mercury (Hg⁰) is a metal with a number of atypical properties, which has resulted in its use in myriad anthropogenic processes. However, these same properties have also led to severe local subsurface contamination at many places where it has been used. As such, we studied the influence of various parameters on Hg(II) sorption onto pyrite (pH, time, Hg(II) concentration), a potential subsurface reactive barrier. Batch sorption studies revealed that total Hg(II) removal increases with both pH and time. X-ray absorption spectroscopy analysis showed that a transformation in the coordination environment at low pH occurred during aging over 2 weeks, to form an ordered monolayer of monodentate Hg-Cl complexes on pyrite. In column studies packed with pure quartz sand, the transport of Hg(II) was significantly retarded by the presence of a thin pyrite-sand reactive barrier, although dissolved oxygen inhibited Hg(II) sorption onto pyrite in the column.     

Critical Limits for Hg(II) in soils, derived from chronic toxicity data

Published chronic toxicity data for Hg(II) added to soils were assembled and evaluated to produce a data set comprising 52 chronic end-points, five each for plants and invertebrates and 42 for microbes. With end-points expressed in terms of added soil Hg(II) contents, Critical Limits were derived from the 5th percentiles of species sensitivity distributions, values of 0.13 μg (g soil)⁻¹ and 3.3 μg (g soil organic matter)⁻¹ being obtained. The latter value exceeds the currently recommended Critical Limit, used to determine Hg(II) Critical Loads in Europe, of 0.5 μg (g soil organic matter)⁻¹. We also applied the WHAM/Model VI chemical speciation model to estimate concentrations of Hg²⁺ in soil solution, and derived an approximate Critical Limit Function (CLF) that includes pH; log [Hg²⁺]_crit = −2.15 pH −17.10. Because they take soil properties into account, the soil organic matter-based limit and the CLF provide the best assessment of toxic threat for different soils. For differing representative soils, each predicts a range of up to 100-fold in the dry weight-based content of mercury that corresponds to the Critical Limit.     

Continuous time random walk model better describes the tailing of atrazine transport in soil

Contaminant transport in soils is complicated and involves some physical and chemical nonequilibrium processes. In this research, the soil column displacement experiments of Cl⁻ and atrazine under different flow velocities were carried out. The data sets of Cl⁻ transport in sandy loam fitted to the convection dispersion equation (CDE) and the two-region model (TRM) indicated that the effects of physical nonequilibrium process produced by immobile water on the breakthrough curves (BTCs) of Cl⁻ and atrazine transport through the repacking soil columns were negligible. The two-site model (TSM) and the continuous time random walk (CTRW) were also used to fit atrazine transport behavior at the flow rate of 19.86 cm h⁻¹. The CTRW convincingly captured the full evolution of atrazine BTC in the soil column, especially for the part of long tailing. However, the TSM failed to characterize the tailing of atrazine BTC in the soil column. The calculated fraction of equilibrium sorption sites, F, ranging from 0.78 to 0.80 for all flow rates suggested the contribution of nonequilibrium sorption sites to the asymmetry of atrazine BTCs. Furthermore, the data sets for the flow rates of 6.68 cm h⁻¹ and 32.81 cm h⁻¹ were predicted by the TSM and the CTRW. As to the flow rate of 6.68 cm h⁻¹, the CTRW predicted the entire BTC of atrazine transport better than the TSM did. For the flow rate of 32.81 cm h⁻¹, the CTRW characterized the late part of the tail better, while the TSM failed to predict the tailings of atrazine BTC.     

The role of sorption and bacteria in mercury partitioning and bioavailability in artificial sediments

This study compared the relative importance of three types of sorption (organic matter-particle, mercury-organic matter and mercury-particle) in controlling the overall mercury partitioning and bioavailability in sediments. We found that all three types of sorption were important for both inorganic mercury (Hg) and methylated mercury (MeHg). Mercury-particle sorption was more important than mercury-fulvic acid (FA) sorption in increasing the mercury concentrations with increasing aging. Bioavailability (quantified by gut juice extraction from sipunculans) was mainly controlled by mercury-particle sorption, while FA-particle and mercury-FA sorption were not as important, especially for MeHg. Bacterial activity also increased the partitioning of Hg or MeHg in the sediments and was further facilitated by the presence of organic matter. The bioavailability of Hg or MeHg from sediments was only slightly influenced by bacterial activity. This study highlights the importance of sorption from various sources (especially mercury-particle sorption) as well as bacteria in controlling the partitioning and bioavailability of Hg or MeHg in sediments.     

Long-term tillage effects on soil metolachlor sorption and desorption behavior

Sorption and desorption are two important processes that influence the amount of pesticides retained by soils. However, the detailed sorption mechanisms as influenced by soil tillage management are unclear. This study examined the sorption and desorption characteristics of metolachlor [2-chloro-N-(2-ethyl-6-methyphenyl)-N-(2-methoxy-1-methylethyl)-acetamide] using the soil samples collected from the long-term conservation tillage (CnT) and conventional tillage (CT) research plots established in 1979 in Darlinton, SC. Humic acid (HA) and humin were extracted from the soils and used in the sorption experiments along with the whole soil samples. The sorption experiments were conducted using a batch-equilibration method. Three sequential desorption rinses were carried out following the sorption experiments. By comparing metolachlor sorption and desorption results we observed hysteresis for all soil samples and their organic matter fractions. Sorption nonlinearity (N) and hysteresis were dependent on the structure and composition of soil organic matter (SOM), e.g., Freundlich isotherm exponents (N) of HA and humin from CnT were higher than those of CT treatment, which may be related to high aromaticity of SOM fractions in CT treatment. Sorption capacity (K'f) was positively correlated with soil organic carbon (SOC) content. These results show that long-term tillage management can greatly affect metolachlor sorption and desorption behavior probably by qualitative differences in the structural characteristics of the humic substances.     

Speciation and quantification of mercury in Oxisol, Ultisol, and Spodosol from Amazon (Manaus, Brazil)

In order to investigate the content and distribution of Hg in soils from Amazon areas not impacted by gold mining activities, the concentration and granulometric distribution of Hg were determined in three different types of soils. Hg speciation data were obtained by a thermodesorption atomic spectrometry system and the role of physico-chemical and mineralogical characteristics on Hg content were also studied. Hg concentrations found in the soil fraction <2000 microm were similar to values found in other Amazon areas without anthropogenic sources. The fine fraction (<53 microm) of podzolized soils had a higher Hg content than clayey soils. Multivariate analysis shows that there are marking differences between Spodosols of two distinct areas (fine fraction Hg contents up to 10-fold as high) indicating the importance of pedogenic processes. All statistical data analysis indicated that organic matter plays an important role in Hg accumulation in the types of soils studied. Thermodesorption analysis revealed the presence of only Hg2+, and the predominance of organically bound Hg in the majority of the studied samples.     

Effects of surface coatings on electrochemical properties and contaminant sorption of clay minerals

Surface charges play a major role in determining the interactions of contaminants with soils. The most important sources of soil charges are clay mineral colloids, whose electrochemical properties are usually modified by metal-oxides and organic matter in natural environments. In this study, effects of coatings of organic matter and Fe- and Al-oxides on a series of electrochemical properties and heavy metal sorption of three clay minerals (kaolinite, montmorillonite and illite) predominant in natural soils were investigated using batch techniques. The results indicate that the coatings increased the specific surface area of the clay minerals, except for the Al-oxide coated montmorillonite and organic matter coated 2:1 clay minerals. The sesquioxide coatings increased amount of positive charges but decreased negative charges. This causes great reduction of the negative potential on the clay surfaces, shift of the zero point of charge to a higher pH, and promotion of fluoride sorption due to presence of more OH- and OH2 on the oxide surfaces than on the clay surfaces. In contrast, the organic coating significantly increased the negativity of surface charges, and thus the zero point of charge and zeta-potential of the clays dropped down. The organic coating also induced a reduction of fluoride sorption on the clays. With respect to the sorption of lead and cadmium, the sesquioxide coatings produced insignificant effects. The experiments of lead/cadmium competitive sorption show that on both the oxide-coated surface and the original clay surface there exist different types of sites, each of which preferentially binds with a heavy metal.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48–72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K _d) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Effect of clays, metal oxides, and organic matter on rhamnolipid biosurfactant sorption by soil

Rhamnolipids produced by Pseudomonas aeruginosa have been proposed as soil washing agents for enhanced removal of metal and organic contaminants from soil. A potential limitation for the application of rhamnolipids is sorption by soil matrix components. The objective of this study is to empirically determine the contribution of representative soil constituents (clays, metal oxides, and organic matter) to sorption of the rhamnolipid form most efficient at metal complexation (monorhamnolipid). Sorption studies show that monorhamnolipid (R1) sorption is concentration dependent. At low R1 concentrations that are relevant for enhancing organic contaminant biodegradation, R1 sorption followed the order: hematite (Fe(2)O(3))>kaolinite>MnO(2) approximately illite approximately Ca-montmorillonite>gibbsite (Al(OH)(3))>humic acid-coated silica. At high R1 concentrations, relevant for use in complexation/removal of metals or organics, R1 sorption followed the order: illite>humic acid-coated silica>Ca-montmorillonite>hematite>MnO(2)>gibbsite approximately kaolinite. These results allowed prediction of R1 sorption by a series of six soils. Finally, a comparison of R1 and R2 (dirhamnolipid) shows that the R1 form sorbs more strongly alone than when in a mixture of both the R1 and R2 forms. The information presented can be used to estimate, on an individual soil basis, the extent of rhamnolipid sorption. This is important for determining: (1) whether rhamnolipid addition is a feasible remediation option and (2) the amount of rhamnolipid required to efficiently remove the contaminant.     

Sorption, desorption, and degradation of (4-chloro-2-methylphenoxy)acetic acid in representative soils of the Danubian Lowland, Slovakia

Herbicide leaching through soil into groundwater greatly depends upon sorption-desorption and degradation phenomena. Batch adsorption, desorption and degradation experiments were performed with acidic herbicide MCPA and three soil types collected from their respective soil horizons. MCPA was found to be weakly sorbed by the soils with Freundlich coefficient values ranging from 0.37 to 1.03 mg^1−1/n kg⁻¹ L^1/n. It was shown that MCPA sorption positively correlated with soil organic carbon content, humic and fulvic acid carbon contents, and negatively with soil pH. The importance of soil organic matter in MCPA sorption by soils was also confirmed by performing sorption experiments after soil organic matter removal. MCPA sorption in these treated soils decreased by 37-100% compared to the original soils. A relatively large part of the sorbed MCPA was released from soils into aqueous solution after four successive desorption steps, although some hysteresis occurred during desorption of MCPA from all soils. Both sorption and desorption were depth-dependent, the A soil horizons exhibited higher retention capacity of the herbicide than B or C soil horizons. Generally, MCPA sorption decreased in the presence of phosphate and low molecular weight organic acids. Degradation of MCPA was faster in the A soil horizons than the corresponding B or C soil horizons with half-life values ranging from 4.9 to 9.6 d in topsoils and from 11.6 to 23.4 d in subsoils.     

Effect of soil properties on degradation and sorption of methyl bromide in soil

Methyl bromide (CH₃Br) is currently the most widely used soil fumigant, and its emission into the atmosphere after application reportedly contributes to ozone depletion in the stratosphere. Irreversible degradation and partially reversible sorption reactions affect the quantity of this furnigant reaching the soil surface and escaping into the atmosphere. Incubation studies in closed headspace vials under controlled conditions showed that degradation of CH₃Br was highly dependent on soil organic matter content, and to a lesser extent, on the moisture level in the soil. Methylation of CH₃Br on organic matter was suggested to be the major reaction that CH₃Br undergoes in the soil environment. Other soil constituents such as clay did not contribute to the degradation under moist or air-dried conditions, though enhanced degradation was observed on oven-dried montmorillonite and kaolinite clays. Within soil profiles, degradation of CH₃Br decreased with soil depth mainly due to the reduction of soil organic matter content with depth. In both Greenfield and Wasco sandy loams, the degradation rate of CH₃Br in soil layers from 0 to 270 cm could be estimated from soil organic matter content. Sorption of CH₃Br on moist soils was generally limited, and varied with soil depth. The degree of sorption could be predicted from soil moisture alone or soil moisture and organic matter content.