The role of the cement industry in the contamination of air, water, soil and plant with vanadium in Cairo

Levels of vanadium in air, water, soil and plants resulting from the operation of a cement factory in south Cairo were extensively studied. Results obtained were compared with the level of vanadium in a relatively non-polluted residential area. It was concluded that the studied cement factory is the main source of the element to the adjacent environment. This is essentially due to the fact that this cement factory is using fossil fuels and raw materials that both contain high levels of vanadium without adequate control of the release of pollutants. Continuous release of air-borne dust from the cement industry will increase the level of vanadium in the surrounding environment in the long run.     

Reducing plant uptake of PAHs by cationic surfactant-enhanced soil retention

Reducing the transfer of contaminants from soils to plants is a promising approach to produce safe agricultural products grown on contaminated soils. In this study, 0-400 mg/kg cetyltrimethylammonium bromide (CTMAB) and dodecylpyridinium bromide (DDPB) were separately utilized to enhance the sorption of PAHs onto soils, thereby reducing the transfer of PAHs from soil to soil solution and subsequently to plants. Concentrations of phenanthrene and pyrene in vegetables grown in contaminated soils treated with the cationic surfactants were lower than those grown in the surfactant-free control. The maximum reductions of phenanthrene and pyrene were 66% and 51% for chrysanthemum (Chrysanthemum coronarium L.), 62% and 71% for cabbage (Brassica campestris L.), and 34% and 53% for lettuce (Lactuca sativa L.), respectively. Considering the impacts of cationic surfactants on plant growth and soil microbial activity, CTMAB was more appropriate to employ, and the most effective dose was 100-200 mg/kg.     

Metal contents of fish from cultureponds near scrap metal reclamation facilities

Milkfish (Chanos chanos) from four fish-culture ponds adjacent to different metal recovery facilities along the Er-Jen River area, Tainan, Taiwan, were sampled to determine their metal contents. Chemical analysis showed that fish tissue contained different concentrations of Cu: 0.71-6.37 micrograms/g, Pb: ND (not detectable) approximately 41.04 micrograms/g, Cd: ND approximately 0.41 microgram/g, Al: 6.75-64.11 micrograms/g, Ni: 0.062-0.504 microgram/g and Zn: 16.11-41.86 micrograms/g. The average concentrations of Cu, Al, Zn, Cd and Pb in fish samples from some of the ponds were significantly higher than those from the reference pond. In addition, there were variations in metal concentrations of fish collected from different ponds. Pond D had the highest mean values of Cu, Cd and Zn, and Pond B of Al and Pb. Further investigations are needed to determine the source of metal contamination in the fish.     

永川城区主要绿化植物的滞尘效应

本文选取重庆市永川区具代表性植物及绿地作为研究对象,采用直接采样和统计分析的方法,对植物单位叶片面积滞尘量进行测定分析。结果表明:同一功能区不同植物种类之间的滞尘能力存在差异,滞尘能力大小排列顺序为:红花檵木>麦冬>小叶榕>红叶石楠>桂花>山茶>女贞>八角金盘>广玉兰>海桐>黄角兰>冬青>银杏>迎春,最高为红花檵木12.361 g/m2,最低为迎春2.0903 g/m2,最大差异达6倍;不同功能区同种植物的平均滞尘量差异显著,排列顺序为:街道绿地>新兴绿地>居住区>净化对照区;运用扫描电镜对叶表进行观察表明:植物的不同叶表结构滞尘能力也有差异,叶片表面被毛、褶皱时滞尘能力较强,叶片光滑或蜡质时滞尘能力较弱;植物叶片滞尘量与植物叶片单片面积呈正相关。     

Reduction in residential chromium following site remediation

The purpose of this study was to determine the influence of chromate production waste site remediation on residential Cr concentrations in house dust. Twenty-three homes in Jersey City, NJ, were identified as having had high (> 500 micrograms/gm, median 739 micrograms/gm), medium (100-400 micrograms/gm, median 245 micrograms/gm), or low (< 100 micrograms/gm, median 48 micrograms/gm) Cr in house dust during a study conducted in 1992-1993 prior to site remediation. House dust samples were collected on four visits from each home between November 1996 and February 1998, extracted with HNO3, and analyzed for Cr with an inductively coupled plasma-mass spectrometer. Homes that had low Cr concentrations in 1992-1993 continued to have low Cr concentrations (median 1 microgram/g). In contrast, substantial declines in Cr concentrations were found in the house dust collected from homes located near the remediated waste sites: previously high-level homes had a median of 50 micrograms/g and mid-level homes had a median of 34 micrograms/g. Site remediation had a beneficial effect on household loadings of Cr, since no differences in post-remediation house dust Cr concentrations were found among the three groups.     

Evaluating levels and health risk of heavy metals in exposed workers from surgical instrument manufacturing industries of Sialkot,Pakistan

The study aimed to monitor heavy metal (chromium, Cr; cadmium, Cd; nickel, Ni; copper, Cu; lead, Pb; iron, Fe; manganese, Mn; and zinc, Zn) footprints in biological matrices (urine, whole blood, saliva, and hair), as well as in indoor industrial dust samples, and their toxic effects on oxidative stress and health risks in exposed workers. Overall, blood, urine, and saliva samples exhibited significantly higher concentrations of toxic metals in exposed workers (Cr; blood 16.30 μg/L, urine 58.15 μg/L, saliva 5.28 μg/L) than the control samples (Cr; blood 5.48 μg/L, urine 4.47 μg/L, saliva 2.46 μg/L). Indoor industrial dust samples also reported to have elevated heavy metal concentrations, as an example, Cr quantified with concentration of 299 mg/kg of dust, i.e., more than twice the level of Cr in household dust (136 mg/kg). Superoxide dismutase (SOD) level presented significant positive correlation (p?≤?0.01) with Cr, Zn, and Cd (Cr?>?Zn?>?Cd) which is an indication of heavy metal’s associated raised oxidative stress in exposed workers. Elevated average daily intake (ADI) of heavy metals resulted in cumulative hazard quotient (HQ) range of 2.97–18.88 in workers of different surgical units; this is an alarming situation of health risk implications. Principal component analysis-multiple linear regression (PCA-MLR)-based pie charts represent that polishing and cutting sections exhibited highest metal inputs to the biological and environmental matrices than other sources. Heavy metal concentrations in biological matrices and dust samples showed a significant positive correlation between Cr in dust, urine, and saliva samples. Current study will help to generate comprehensive base line data of heavy metal status in biomatrices and dust from scientifically ignored industrial sector. Our findings can play vital role for health departments and industrial environmental management system (EMS) authorities in policy making and implementation.     

Identification of selected hormonally active agents and animal mammary carcinogens in commercial and residential air and dust samples

In order to characterize typical indoor exposures to chemicals of interest for research on breast cancer and other hormonally mediated health outcomes, methods were developed to analyze air and dust for target compounds that have been identified as animal mammary carcinogens or hormonally active agents and that are used in commercial or consumer products or building materials. These methods were applied to a small number of residential and commercial environments to begin to characterize the extent of exposure to these classes of compounds. Phenolic compounds, including nonylphenol, octylphenol, bisphenol A, and the methoxychlor metabolite 2,2-bis(p-hydroxyphenyl)-1,1,1-trichloroethane (HPTE), were extracted, derivatized, and analyzed by gas chromatography/mass spectrometry (GC/MS)-selective ion monitoring (SIM). Selected phthalates, pesticides, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) were extracted and analyzed by GC/MS-SIM. Residential and workplace samples showed detectable levels of twelve pesticides in dust and seven in air samples. Phthalates were abundant in dust (0.3-524 micrograms/g) and air (0.005-2.8 micrograms/m3). Nonylphenol and its mono- and di-ethoxylates were prevalent in dust (0.82-14 micrograms/g) along with estrogenic phenols such as bisphenol A and o-phenyl phenol. In this 7-sample pilot study, 33 of 86 target compounds were detected in dust, and 24 of 57 target compounds were detected in air. In a single sample from one home, 27 of the target compounds were detected in dust and 15 in air, providing an indication of chemical mixtures to which humans are typically exposed.     

Health risks of environmental exposure to metals and herbicides in the Pardo River,Brazil

Mixture of metals and herbicides in rivers may pose relevant risks for the health of surrounding communities. Humans may be exposed to river pollution through intake of contaminated water and fish, as well as irrigated agricultural products. The aim of this study was to assess the human health risks of environmental exposure to metals and herbicides through water and fish intake in the Pardo River. Metals (Al, As, Be, Cd, Cr, Cu, Pb, Mn, Hg, Ni, Tl, Sn, V, and Zn) were analyzed in river water and in edible fish. Herbicides (ametryn, atrazine, diuron, hexazinone, simazine, and tebuthiuron) were analyzed in river water. Seasonal variances were also studied. Aluminum, Cd, Cu, Mn, Pb, and Zn levels in river water were higher than the USEPA benchmarks. Non-carcinogenic risks due to pollutants mixture exposure were above the limit, and carcinogenic risks of As exposure were >10^?6 in the sampling points during the rainy season. Metal levels in fish were lower than the Brazilian legislation and do not pose a threat to public health. Herbicides were detected in four sampling points, with atrazine concentrations (range 0.16–0.32 μg/L) below the Brazilian standard (2.0 μg/L), but above the European Union standard (0.1 μg/L). Considering the water supply needs of cities located in the Pardo River Basin and the persistence of metals and herbicides, the present study indicated that there was a seasonal influence on non-carcinogenic and carcinogenic risks to human health, especially in the rainy season. Studies for water treatment plants implantation should consider the risks of exposure to persistent substances, in order to protect the population.     

Fluoride and aluminium concentrations of tea plants and tea products from Sichuan Province,PR China

Some Tibetans in Sichuan Province in southwestern China have been suffering from fluorosis, due to drinking and eating tea with high fluoride (F) and aluminium (Al) contents. Tea plants, soils of tea plantations and tea products from Yaan, Gaoxian and Yibin Cities in Sichuan Province were investigated to evaluate the factors affecting F and Al contents in tea products. The F and Al concentrations of four commercial brands of brick teas were significantly higher than those of 11 brands of green teas. Chemical analysis indicated that total and available F and Al concentrations in tea plantation soils in Yaan and Gaoxian were within the normal range compared with acid soils in South China and tea soils in Fujian Province. Edaphic conditions did not contribute to the high F and Al concentrations in brick tea. Analysis of raw materials of brick tea indicated that old leaves were the major contributors to the high F and Al contents contained in brick tea. There were also great variations among different tea varieties in accumulating F and Al, and concentrations of F and Al in tea variety of Qianmei 303 were about 2-3-fold higher than the other three varieties. Selection of appropriate varieties would be important to lower F and Al contents in tea products.     

Metal content in street dust as a reflection of atmospheric dust emissions from coal power plants, metal smelters, and traffic

Resuspended street dust is a source of inhalable particles in urban environments. Despite contaminated street dust being a possible health risk factor for local population, little is known about the contribution of atmospheric dust emissions and other factors to the content of toxic metals in street dust. The impact of smelting, traffic, and power plants on metal contaminates in street dust is the focus of street dust sampling at 46 locations in the Witbank area (Republic of South Africa). This area is characterized by numerous open-pit coal mines in the Karoo coal basin, which provides a cheap source of energy to numerous metallurgical smelters and ironworks and supplies coal to the coal-fired power plants located nearby. Street dust was collected on asphalt or concrete surfaces with hard plastic brushes, avoiding collecting of possible sand, soil, or plant particles. Chemical analysis was done on the <0.125 mm fraction using inductively coupled plasma mass spectrometry subsequent to total digestion. Exceptionally high concentrations of metals were detected with concentrations of Fe reaching 17.7 %, Cr 4.3 %, Mn 2 %, Ni 366 mg/kg, and V 4,410 mg/kg. Factor analysis indicates three sources for the pollution. Road traffic which contributes to the high concentrations of Cu, Pb, Sb, and Sn, with the highest impacts detected in the town of Witbank. The second source is associated with the metal smelting industry, contributing to Fe, Co, Mn, and V emissions. The highest factor scores were observed around four metallurgical smelter operations, located in the Ferrobank, Highveld, and Clewer industrial areas. Impact of vanadium smelter to street dust composition could still be detected some 20 km away from the sources. Exceptionally high concentrations of Cr were observed in four samples collected next to the Ferrobank industrial area, despite Cr not being loaded in factor 2. The last source of the pollution is most probably fly ash associated with the coal-fired power plants and fly ash dumps. Elements which are associated with this source are Al, Sr, and Li. This factor is abundant in the coal mining part of the study area.     

Cadmium exposure from the cement dust emissions: a field study in a rural residence

The cement dust is one of the causes of pollution in the environment. In the present study, the cadmium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions were determined and also the blood concentrations and sensitivity conditions in humans residing in this rural area were investigated. The 108 soil (36 for control) and plant specimens were collected from eight different directions of the cement plant located in Cukurhisar town in Eski?ehir city. Blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The results show that the cadmium concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analysis of venous blood samples showed that cadmium concentrations were found to be within the reference values given for both groups, but higher in the subjects (p<0.001). According to the results of patch tests, sensitivity to cadmium was found to be more frequent for the subject group than the control group (p<0.05). Those results show that, although clinical tools revealed no toxic effects for the subject, except contact dermatitis, the cement plant increases cadmium pollution on the surrounding environment.     

Quantification of Hg excretion and distribution in biological samples of mercury-dental-amalgam users and its correlation with biological variables

This is the first study conducted to quantify the excretion and distribution of mercury (Hg) with time (days) in the biological samples collected from Hg dental amalgam users (MDA). The individuals, with Hg-based dental filling were selected, and their biological samples (red blood cells (RBCs), plasma, urine, hair, and nails) were collected on first, third, and 12th day of fillings. The concentrations of Hg observed in the biological samples of MDA were also correlated with the biological variables such as age, weight, restoration, fish consumption, number, and surface area of fillings. The concentrations of Hg in the biological samples of MDA were found 6–8 times higher than the non-amalgam users (control). The concentrations of Hg in the RBCs (4.39 μg/L), plasma (3.02 μg/L), and urine (22.5 μg/L) on first day of filling were found comparatively higher than the concentrations observed on third day (2.15, 1.46, and 12.3 μg/L for RBCs, plasma, urine, respectively) and 12th day (3.05, 2.5, 9.12 μg/L for RBCs, plasma, urine, respectively), while Hg concentrations were found lower in the hair and nails on third day of fillings (1.53 μg/g for hair and 2.35 μg/g for nails) as compared to the 12th day (2.95 μg/g for hair and 3.5 μg/g for nails). The correlations were found significant (p ˂ 0.05) between Hg concentrations in the biological samples of MDA and biological variables (the number of restoration, fish consumption, number, and surface area of fillings), while no significant (p ˃ 0.05) correlations were observed for Hg concentrations in the biological samples with age and weight of MDA. These observations unveil the fact that the use of Hg-based dental filling is the undesirable exposure to Hg which should be replaced by composite (a safer filling material).

     

A study on PCB, PCDD/PCDF industrial contamination in a mixed urban-agricultural area significantly affecting the food chain and the human exposure. Part I: soil and feed

This study deals with a PCB, PCDD and PCDF contamination in Brescia, a city in the North-West of Italy, affecting an area with about 11000 inhabitants. The area is close to an industrial plant that produced, in total, some 31,000 ton of PCB. A relevant part of the polluted area is agricultural soil, where cattle were fed with polluted forage and farmers were consuming their own products, so that contamination led eventually to human exposure. Total levels of PCDD/Fs varied from 8 to 592 pgTE(WHO)/g for soil samples and when the dioxin-like PCBs (dl-PCBs) are included, the levels varied from 14.6 to 1033.7 pgTE(WHO)/g. In several cases, the legal limit was exceeded by more than one order of magnitude, with the highest contamination in some agricultural areas and in the surrounding zones. For the forage samples, total levels of PCDD/Fs varied from 0.29 to 2.04 pgTE(WHO)/g and, when dl-PCBs are included, this range increased from 2.04 to 4.75 pgTE(WHO)/g. PCB contamination of the forage through vapor condensation seemed to be relevant. The toxic contribution of dl-PCBs is always relevant and must be considered for risk management. The main component of the contamination source is probably a heavy PCB mixture, such as Aroclor 1262. The study dealt generally with the contamination transfer of PCBs, PCDDs and PCDFs from soil up to humans across the food chain. Results on soils and forages are shown, while measurements concerning the contamination of the animals fed with contaminated forage, and the exposure of the farmers (through human serum analyses), as compared to general population, will be reported in a dedicated paper.     

Sources of pesticides in surface waters in Switzerland: pesticide load through waste water treatment plants--current situation and reduction potential

Concentrations of pesticides in Swiss rivers and lakes frequently exceed the Swiss quality goal of 0.1 microg/l for surface waters. In this study, concentrations of various pesticides (e.g., atrazine, diuron, mecoprop) were continuously measured in the effluents of waste water treatment plants and in two rivers during a period of four months. These measurements revealed that in the catchment of Lake Greifensee, farmers who did not perfectly comply with 'good agricultural practice' caused at least 14% of the measured agricultural herbicide load into surface waters. Pesticides, used for additional purposes in urban areas (i.e. protection of materials, conservation, etc.), entered surface waters up to 75% through waste water treatment plants.     

Levels and sources of brominated flame retardants in human hair from urban, e-waste, and rural areas in South China

Human hair and indoor dust from urban, e-waste, and rural areas in south China were collected and analyzed for brominated flame retardants (BFRs). BFRs concentrations in hair from occupational e-waste recycling workers were higher than those from non-occupational exposed residents in other sampling areas. Polybrominated diphenyl ethers (PBDEs) and decabromodiphenyl ethane (DBDPE) are two major BFRs in hair samples. The PBDE congener profiles in hair from the e-waste area are different from those from urban and rural areas with relatively higher contribution of lower brominated congeners. DBDPE, instead of BDE209, has become the major BFR in non-e-waste recycling areas. Significant correlations were found between hair level and dust level for DBDPE and BTBPE but not for PBDEs. The different PBDE congener profiles between dust and hair may suggest that exogenous exposure to the PBDE adsorbed on dust is not a major source of hair PBDEs.     

Dietary intake of PCDD/F by small children with different food consumption measured by the duplicate method

The dietary intake of PCDD/F by 42 small children, 21 boys and 21 girls in the age range 14-47 months, with different food consumption behaviour living in urban and rural areas of Germany was measured by the duplicate method with a 7 day sampling period from May to September 1998. The PCDD/F-levels in the food duplicates were in the range 39.2-325 fg I-TEq/g(dry weight) (median: 90.7; arithmetic mean: 96.6) and the doses were in the range 0.681-5.43 with a median of 1.56 and an arithmetic mean (AM) of 1.60 pg I-TEq/(kg(body weight) x d). Children living in an urban industrialized area with food consumption including products from the family owned vegetable gardens or the surrounding area and/or products from domestic animals showed no statistically significant different concentrations in the food duplicates or in the dietary intake of PCDD/F, calculated as I-TEq, than children living in a rural area with similar food consumption behavior or than children consuming exclusively food from the supermarket.     

High average daily intake of PCDD/Fs and serum levels in residents living near a deserted factory producing pentachlorophenol (PCP) in Taiwan: influence of contaminated fish consumption

An abandoned pentachlorophenol plant and nearby area in southern Taiwan was heavily contaminated by dioxins, impurities formed in the PCP production process. The investigation showed that the average serum PCDD/Fs of residents living nearby area (62.5 pg WHO-TEQ/g lipid) was higher than those living in the non-polluted area (22.5 and 18.2 pg WHO-TEQ/g lipid) (P<0.05). In biota samples, average PCDD/F of milkfish in sea reservoir (28.3 pg WHO-TEQ/g) was higher than those in the nearby fish farm (0.15 pg WHO-TEQ/g), and Tilapia and shrimp showed the similar trend. The average daily PCDD/Fs intake of 38% participants was higher than 4 pg WHO-TEQ/kg/day suggested by the world health organization. Serum PCDD/F was positively associated with average daily intake (ADI) after adjustment for age, sex, BMI, and smoking status. In addition, a prospective cohort study is suggested to determine the long-term health effects on the people living near factory.     

PCDD/F-contamination in a hexachlorocyclohexane waste site in Rio de Janeiro,Brazil

In the 1950s, a production plant of hexachlorocyclohexane (HCH) was established in Brazil with the main purpose of producing chemicals for vectors control. This factory was closed down in 1955 and around 300 tons of production residues were left behind in the open air. In 1995, the area was treated with lime to eliminate the HCH contamination. Soil sample gave a PCDD/F concentration of 13 900 ng I-TEQ/kg whereas samples from the neighborhood ranged from 0.19 to 2.08 ng I-TEQ/kg. PCDD/F levels in cow's milk samples varied from 4.1 to 6.5 pg I-TEQ/g of milk fat. High concentration in soil collected from the site suggests that treatment and recovery shall be made. Further dioxin monitoring is needed to better estimate the risk posed to local population through food consumption and soil usage.     

Levels of synthetic musks; bromocyclene and PCBs in eel (Anguilla anguilla) and PCBs in sediment samples from some waters of Berlin/Germany.

The purpose of this study was to identify firstly the extent of contamination both of the aquatic biota and of sediments and secondly any regional differences in the concentrations of these compounds. In 1996, polychlorinated biphenyls (PCBs, including their coplanar congeners) were measured in 58 eel and 50 sediment samples. Furthermore, the veterinary pharmacetical bromocyclene and the nitro musks were determined in 84 (1995) and 122 (1996) eel samples. Polycyclic musk fragrances were additionally determined in analyses carried out in 1996. The mean values obtained during the two measurement periods (1995 and 1996) were 24 and 12 micrograms/kg fw. for musk xylene, 41 and 39 micrograms/kg fw. for musk ketone, 14 and 7 micrograms/kg fw. for bromocyclene and, in 1996, 592 micrograms/kg fw. for HHCB (maximum: 4131 micrograms/kg fw.). Decreasing contamination levels are seen for musk xylene and bromocylene but not for musk ketone. This tendency, and the high amounts of polycyclic musk fragrances in the edible parts of eel show that these musks are widely being used in place of nitro musks and that they reach the aquatic system via waste waters, especially those of sewage treatment plants. The mean levels of PCBs in the biota samples of a highly polluted area were 1227 micrograms/kg fw. or 119 pgTEQ/g (sediment: 203 micrograms/kg dw.) and of a slightly polluted area 340 micrograms/kg fw. or 49 TEQ/g (sediment: 47 micrograms/kg dw.).     

Determination of Heavy Metals in Indoor Dust From Primary School (Sri Serdang,Malaysia): Estimation of the Health Risks

Heavy metal concentrations (Pb, Cd, and Cu) in classroom indoor dust were measured. The health risk (non-carcinogenic) of these heavy metals in classroom indoor dust to children was assessed based on United States Environmental Protection Agency health risk model. Indoor classroom dust samples were collected from 21 locations including windows, fans, and floors at a primary school in Sri Serdang, Malaysia. Classroom dust samples were processed using aqua regia method and analyzed for Pb, Cd, and Cu concentrations. The highest average heavy metal concentrations were found in windows, followed by floor and fan. Pb concentrations ranged from 34.17 μg/g to 101.87 μg/g, Cd concentrations ranged from 1.73 μg/g to 7.5 μg/g, and Cu concentrations ranged from 20.27 μg/g to 82.13 μg/g. Ventilation and cleaning process were found as the possible factors that contributed to heavy metal concentration in window, floor, and fan. Moreover, the hazard index (HI) and hazard quotient (HQ) values for heavy metals Cd and Cu were less than one. By contrast, the HI and HQ values for Pb (maximum values) were more than one, indicating potential non-carcinogenic risk to children. Long-term persistence of leaded petrol, building materials, interior paint, school located near industrial areas and major roads, as well as vehicle emission are the factors attributed to the presence of heavy metals in classroom dust. Further research under a long-term monitoring plan and actual values in a health risk model is crucial before a final decision on heavy metal exposure and its relationship to young children health risks can be made. Nevertheless, the findings of this study provide crucial evidence to include indoor dust quality in school assessment because the environmental processes and impacts of surrounding school area have health risk implications on young children.