Heavy metal distribution and chemical speciation in tailings and soils around a Pb-Zn mine in Spain

Soil pollution by lead, zinc, cadmium and copper was characterized in the mine tailings and surrounding soils (arable and pasture lands) of an old Spanish Pb-Zn mine. Sixty soil samples were analyzed, determining the total metal concentration by acid digestion and the chemical fractionation of Pb and Zn by the modified BCR sequential extraction method. Samples belonging to mine waste areas showed the highest values, with mean concentrations of 28,453.50 mg kg(-1) for Pb, 7000.44 mg kg(-1) for Zn, 20.57 mg kg(-1) for Cd and 308.48 mg kg(-1) for Cu. High concentrations of Pb, Zn and Cd were found in many of the samples taken from surrounding arable and pasture lands, indicating a certain extent of spreading of heavy metal pollution. Acidic drainage and wind transport of dust were proposed as the main effects causing the dispersion of pollution. Sequential extraction showed that most of the Pb was associated with non-residual fractions, mainly in reducible form, in all the collected samples. Zn appeared mainly associated with the acid-extractable form in mine tailing samples, while the residual form was the predominant one in samples belonging to surrounding areas. Comparison of our results with several criteria reported in the literature for risk assessment in soils polluted by heavy metals showed the need to treat the mine tailings dumped in the mine area.     

Long-term evaluation of coal fly ash and mine tailings co-placement: A site-specific study

This study presents the results of a laboratory investigation conducted to evaluate the efficiency of coal fly ash to control the formation of acid mine drainage (AMD) from mine waste. Site-specific materials, coal fly ash from Atikokan Thermal Generating Station and mine tailings from Musselwhite mine, were mixed at different proportions for the investigation of the drainage chemistry and the optimal mix using static testing (acid–base accounting) and kinetic (column) testing. The acid–base accounting (ABA) results indicated that the fly ash possessed strong alkaline (neutralization) potential (NP) and could be used in the management of reactive mine tailings, thus ensuring prevention of AMD in the long-term. Column tests conducted in the laboratory to further investigate long-term performance of fly ash in the neutralization and prevention of acid mine drainage from tailings similarly showed that mixing fly ash with mine tailings reduces dissolution of many heavy metals from tailings by providing alkalinity to the system. It was found that a fly ash to tailings mass ratio equal to or greater than 15% can effectively prevent AMD generation from Musselwhite mine tailings in the co-placement approach.     

Effect of peroxide on neutralization-potential values of siderite and other carbonate minerals

To assess quantitatively the effect of peroxide addition to standard static tests of the neutralization potential (NP) of mine wastes, 10 specimens of carbonate minerals, including five of siderite (FeCO3) and two of rhodochrosite (MnCO3), were analyzed by electron microprobe. The compositions of the siderite span a range from 60 to 86 mol % Fe. Tests of NP for the siderite diluted with 80% (w/w) kaolinite gave values of 647 to 737 kg CaCO3 equivalent per Mg for determinations by the standard Sobek method. However, if it is assumed that the ferrous carbonate component of the mineral does not contribute to NP in field situations because oxidation of Fe(II) to Fe(III) and the subsequent hydrolysis of Fe(III) leads to the release of an equivalent amount of acid, then the calculated NP for the samples ranges from 110 to 390 kg CaCO3 equivalent per Mg. Two different methods involving the addition of peroxide to the test solutions were successful in bringing the measured NP values closer to the theoretical ones. By contrast, the tests with rhodochrosite indicated the Mn(II) to be stable. For long-term environmental planning, especially for wastes from metalliferous sulfide-poor deposits in which gradual dissolution of silicate and aluminosilicate minerals may be involved in attenuating the acidity, consideration in the overall NP budget needs to be given to the ferrous iron content of those minerals. The presence of Fe2+-bearing minerals, especially carbonates, in tested mine-waste materials may lead to overestimated Sobek NP values, thus increasing the risk of poor-quality drainage and the need for costly remediation.     

Leaching of carbonated air pollution control residues using compliance leaching tests

The leaching characteristics of air pollution control (APC) residues collected in Shanghai, China, were compared by performing three compliance leaching tests. These were the standard Chinese method for determining the leaching toxicity of solid waste (GB 5086.1-1997), the USEPA's Toxicity Characteristic Leaching Procedure (TCLP), and the new European shake test (EN 12457-3). In particular, behaviors of raw samples and samples that had been subjected to natural aging were compared. Both the leaching tests and natural aging substantially affected the leaching results concerning the APC residue samples. Most importantly, EN and GB tests classified the raw APC residues as hazardous, but the residues passed the TCLP test as nonhazardous. After it had been naturally aged for 720 h, however, the aged sample was classified as hazardous by the TCLP and EN tests, but as nonhazardous by the GB test. Metals that are thought to have been immobilized by carbonation were released at pH 6.3. Model calculations based on the geochemical thermodynamic equilibrium model MINTEQA2 revealed that the formation of metal carbonates did not correspond to the noted change in the leaching behaviors in the three leaching tests. Rather, the partial neutralization of alkaline ash by dissolved CO2 changing the final pH of the leachate dominated the leaching characteristics. The leaching results showed a change in leachate pH.     

Reclamation of wastes contaminated by copper,lead, and zinc

Waste materials containing toxic levels of copper, lead, and zinc, such as mine and smelter wastes, present difficult conditions for the establishment of vegetation. This article reviews the many attempts which have been made to reclaim these wastes. Inert wastes from mining and quarrying operations, such as slate quarry waste and certain colliery shales, seem to be good materials for reclaiming wastes contaminated by copper, lead, and zinc. Organic wastes, such as sewage sludge and domestic refuse, may provide only a temporary visual improvement and stabilization of the toxic materials.Nontolerant plant materials may often be planted directly on modern waste materials, which are less toxic than they were in the past. However, tolerant plant materials are needed for revegetating waste materials produced by early and more primitive extraction methods.     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.     

Acidification-neutralization processes in a lignite mine spoil amended with fly ash or limestone

A laboratory experiment was conducted to investigate the longterm effects of amending sulfide-rich lignite mine spoil with fly ash (originating from a coal-fired power station and largely comprised of aluminosilicates) and/or agricultural limestone. The experiment was carried out with soil moisture maintained at field capacity or alternate cycles of wetting and drying. Results obtained suggest that the principal acidification processes were oxidation of sulfide and formation of hydroxysulfate (FeOHSO4), whereas the main neutralization processes were weathering of aluminosilicates in fly ash-treated samples and dissolution of calcium carbonate in limestone-treated samples. The highest dose of limestone rapidly raised the pH of the spoil, but this increase was not maintained throughout the one-year experiment. In contrast, fly ash-treated samples showed a more sustained increase in pH, attributable to the gradual weathering of aluminosilicates. The best results (i.e., good short- and long-term neutralization) were obtained in samples treated with both fly ash and limestone. The low liming capacity of the fly ash (47.85 cmol kg(-1)) means that it must be used in large quantities, an advantage in achieving the further aim of disposing of the fly ash.     

Evaluation of water treatment sludge for ameliorating acid mine waste

This study investigated the liming effect of water treatment sludge on acid mine spoils. The study was conducted with sludge from a water purification plant along the Vaal River catchments in South Africa. The optimum application rate for liming acid spoils and the speed and depth with which the sludge reacted with the mine waste were investigated. Chemical analysis indicated that the sludge is suitable as a liming agent because of its alkaline pH (8.08), high bicarbonate concentration (183.03 mg L(-1)), and low salinity (electrical conductivity = 76 mS m(-1)). The high cation exchange capacity of 15.47 cmol(c) kg(-1) and elevated nitrate concentration (73.16 mg L(-1)) also increase its value as an ameliorative material. The soluble concentrations for manganese, aluminum, lead, and selenium were high at a pH of 5 although only selenium (0.83 mg L(-1)) warranted some concern. According to experimental results, the application of 10 Mg ha(-1) of sludge to acid gold tailings increased the leach water pH from 4.5 to more than 7.5 and also increased the medium pH from 2.4 to 7.5. The addition of sludge further reduced the solubility of iron, manganese, copper, and zinc in the ameliorated gold tailings, but increased the electrical conductivity. The liming tempo was highest in the coal discard profile that had a coarse particle size distribution and took the longest to move through the gold tailings that had a fine particle size distribution. Results from this study indicate that the water treatment sludge investigated is suitable as a liming agent for rehabilitation of acid mine waste.     

Iron sulfide oxidation as influenced by calcium carbonate application

Two overburden materials, with different FeS2 contents (1.9 and 4.1%) and low acid neutralization potential, were limed with CaCO3 at rates of 0, 25, 50, 75, 100, and 125% based on the amount of CaCO3 needed to provide an acid-base account deficit (A/Ba) of zero (A/Ba = neutralization potential--potential acidity--exchangeable acidity). The limed overburden materials were inoculated with Thiobacillus ferrooxidans and leached weekly with deionized water. Residual FeS2 and CaCO3 were determined in samples over a 378-d period. Oxidation followed zero-order kinetics with respect to FeS2 concentration at pH values greater than 4 and first-order kinetics at pH values less than 4. Zero-order oxidation rates ranged from 0.01 to 0.46 micromol g(-1) d(-1) in the overburden with 1.9% FeS2 and from 0.01 to 0.22 micromol g(-1) d(-1) in the overburden with 4.1% FeS2. Oxidation following the first-order rate law had a first-order rate constant of 0.03 d(-1) in the 1.9% FeS2 overburden and 0.01 d(-1) in the 4.1% FeS2 overburden. The calculated half-life was 23 d for the 1.9% FeS2 overburden and 69 d for the 4.1% FeS2 overburden. Additions of CaCO3 affected FeS2 oxidation by controlling the pH of the system. Liming to greater than 50% of the acid-base account deficit did not significantly affect the zero-order oxidation rate. Dissolution of the applied CaCO3 was found to be faster than the oxidation of FeS2 at pH values greater than 4. It was projected that at lime rates up to 125%, the CaCO3 would dissolve and leach out of the system before all the FeS2 oxidized, leaving the potential for acid minesoil formation.     

Impact of unconfined sulphur-mine waste on a semi-arid environment (Almería, SE Spain)

Thirty-five soil samples were taken from unconfined mine waste, stream sediments, and surfaces unoccupied by mining and presumably unaffected by it, in a sulphur-mining zone surrounded by carbonate material and characterized by a semi-arid climate with short torrential storms. These samples were analysed and the results compared to estimate the spread of pollution in the landscape and to assess potential environmental risk. The mean concentrations of S, Zn, Cd, Pb, and As in mine waste were between 3.5-fold (As) and 50-fold (S) greater than unaffected soils. Oxidation of S led to a sharp drop in pH, strong weathering of minerals, and solubilisation of the constituent elements, forming a toxic acidic mine drainage with highly concentrated pollutants that were discharged into the drainage channels. Successive acid mine drainage into the soil on the valley floor spreads acidification and pollution downstream. The high carbonate content in surrounding soils played an important role in the increase of the pH and precipitation of S, Pb, and Al of the affected soils. Meanwhile, high mobility of Zn, Cd and As under basic conditions and a low Fe concentration explain the broad spread of these elements, as high concentrations were detected in soil more than 2000 m from the source. Only the soil solutions from near the waste dump (first 500 m) were highly phytotoxic, and moderately phytotoxic from 500 to 1500 m away. The concentration of pollutants in the leachates was clearly higher than in soil solutions, even in the soils located over 2000 m from the source, implying that the size of the polluted area will increase with time.     

Health-care waste management in India.

Health-care waste management in India is receiving greater attention due to recent regulations (the Biomedical Wastes (Management & Handling) Rules, 1998). The prevailing situation is analysed covering various issues like quantities and proportion of different constituents of wastes, handling, treatment and disposal methods in various health-care units (HCUs). The waste generation rate ranges between 0.5 and 2.0 kg bed-1 day-1. It is estimated that annually about 0.33 million tonnes of waste are generated in India. The solid waste from the hospitals consists of bandages, linen and other infectious waste (30-35%), plastics (7-10%), disposable syringes (0.3-0.5%), glass (3-5%) and other general wastes including food (40-45%). In general, the wastes are collected in a mixed form, transported and disposed of along with municipal solid wastes. At many places, authorities are failing to install appropriate systems for a variety of reasons, such as non-availability of appropriate technologies, inadequate financial resources and absence of professional training on waste management. Hazards associated with health-care waste management and shortcomings in the existing system are identified. The rules for management and handling of biomedical wastes are summarised, giving the categories of different wastes, suggested storage containers including colour-coding and treatment options. Existing and proposed systems of health-care waste management are described. A waste-management plan for health-care establishments is also proposed, which includes institutional arrangements, appropriate technologies, operational plans, financial management and the drawing up of appropriate staff training programmes.     

Recovery of boric acid from boronic wastes by leaching with water,carbon dioxide- or sulfur dioxide-saturated water and leaching kinetics

B₂O₃ was recovered from waste samples such as borogypsum, reactor waste, boronic sludges, waste mud and concentrator waste by leaching processes using distilled water, sulfur dioxide- and carbon dioxide-saturated water. In the leaching processes, temperature, stirring time and solid-to-liquid ratio were taken as parameters. The amount of B₂O₃ leached increased with increasing temperature and stirring time and it also increased with decreasing solid-to-liquid ratio, but the increase was less than that recorded for the leaching temperature and the stirring time. SO₂ saturated water is a more effective leaching solvent than CO₂ saturated water for boronic wastes. By the end of the experiments, more than 90% of B₂O₃ recovery was found as boric acid. In the leaching of boric acid from boronic wastes in water saturated with sulfur dioxide, it was observed that the leaching rate increases with increasing temperature and leaching time. The overall average values of the kinetic parameters were: apparent activation energy (E) 33.2 kJ mol⁻¹, pre-exponential factor (A) 8.2×10⁹ min⁻¹, reaction order (n) 0.97 and rate constant (k) 3.37×10³ min⁻¹ for the leaching processes of the boronic wastes.     

Utilization of coal combustion by-products in sustainable construction materials

Solid waste management is gaining significant importance with the ever-increasing quantities of industrial by-products and wastes. With the environmental awareness and scarcity of space for landfilling, wastes/by-product utilization has become an attractive alternative to disposal. Several industrial by-products are produced from manufacturing processes, service industries and municipal solid wastes. Some of these industrial by-products/waste materials could possibility be used in cement-based materials.Coal combustion by-products (CCBs) represent incombustible materials left after combustion of coal in conventional and/or advanced clean-coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean-coal technology combustors. This paper briefly describes various coal combustion products produced, as well as current best recycling use options for these materials. Materials, productions, properties, potential applications in manufacture of emerging materials for sustainable construction, as well as environmental impact are also briefly discussed.     

An overview for the utilization of wastes from stainless steel industries

Significant quantities of wastes are generated as the waste materials or byproducts every day from stainless steel processes. According to the origins and characteristics, the stainless steel wastes can be mainly classified into two categories, slags and dusts. They usually contained considerable quantities of valuable metals and materials. This paper summarized and analyzed the generation, composition, characteristics and the leaching behaviors of the most of wastes obtained from the stainless steel processes. On this basis, a review of several methods for treating the various stainless steel wastes was made. It is very essential not only for recycling the valuable metals and mineral resources but also for protecting the environment.     

Relation Between Edaphic Factors and Vegetation Development on Copper Mine Wastes: A Case Study From Bor (Serbia,SE Europe)

The relationship between edaphic characteristics and vegetation growing on mine wastes in the Bor region (East Serbia, SE Europe) was studied using multivariate statistical analysis. The influence of edaphic factors on the composition of plant life-forms was also investigated, since it could reflect strategies for the avoidance of or tolerance to disturbances of ecosystems. The goal was to provide potential models for the restoration and management of this and similar mine waste areas. The results of this study imply that soil textures, nitrogen contents, reclamation technology and the presence of hydrothermally altered andesite as the type of bedrock significantly influenced plant colonization and vegetation composition of the Bor mine wastes. These edaphic factors explained 30.3 % of the total variation in the vegetation data set. It was also revealed that the pattern of plant life-forms found on the considered site groups corresponded to the soil texture. Based on their relative abundance on the investigated sites and relationships with soil properties it is concluded that therophytes and geophytes are unsuccessful primary colonizers of the Bor mine wastes. Hemicryptophytes of psammophytic character were the most successful primary colonizers and therefore potential candidates for anthropogenically-assisted natural recovery. This study suggested that an assessment of edaphic factors should be widely used in the characterization of mine wastes prior to reclamation. Estimation of their role in the development of existing mine vegetation should predate reclamation procedures. Thus, approaches based on adequate plant life-forms should have a more prominent role in future mine reclamation schemes.     

Chemical and physical properties of dry flue gas desulfurization products

Beneficial and environmentally safe recycling of flue gas desulfurization (FGD) products requires detailed knowledge of their chemical and physical properties. We analyzed 59 dry FGD samples collected from 13 locations representing four major FGD scrubbing technologies. The chemistry of all samples was dominated by Ca, S, Al, Fe, and Si and strong preferential partitioning into the acid insoluble residue (i.e., coal ash residue) was observed for Al, Ba, Be, Cr, Fe, Li, K, Pb, Si, and V. Sulfur, Ca, and Mg occurred primarily in water- or acid-soluble forms associated with the sorbents or scrubber reaction products. Deionized water leachates (American Society for Testing and Materials [ASTM] method) and dilute acetic acid leachates (toxicity characteristic leaching procedure [TCLP] method) had mean pH values of >11.2 and high mean concentrations of S primarily as SO(2-)4 and Ca. Concentrations of Ag, As, Ba, Cd, Cr, Hg, Pb, and Se (except for ASTM Se in two samples) were below drinking water standards in both ASTM and TCLP leachates. Total toxicity equivalents (TEQ) of dioxins, for two FGD products used for mine reclamation, were 0.48 and 0.53 ng kg(-1). This was similar to the background level of the mine spoil (0.57 ng kg(-1)). The FGD materials were mostly uniform in particle size. Specific surface area (m2 g(-1)) was related to particle size and varied from 1.3 for bed ash to 9.5 for spray dryer material. Many of the chemical and physical properties of these FGD samples were associated with the quality of the coal rather than the combustion and SO2 scrubbing processes used.     

Anaerobic treatment with methane recovery of agricultural and village wastes

To provide more efficient utilization of village wastes and agricultural residues and eliminate pollution from current practices anaerobic treatment of such wastes with methane recovery is proposed. This paper describes studies to determine the performance of anaerobic composting for such wastes.Composting of three waste types was investigated: (a) agricultural residues, (b) Village solid waste and 1:1 mixture of (a) and (b). Three 150 gallon reactors with periodic leachate recycling were used for anaerobic composting while three 50 gallon reactors produced an aerobic compost from the same wastes. Reactors were maintained for six months simulating the time between growing seasons. Volatile solids destruction ranged from 10.3 to 38.7%. Biogas production was ranged from 1350 to 1420 1 per k of volatile solids destroyed with a methane content of 55 to 70%. Leachate was monitored throughout for: pH, alkalinity, total and ammonia nitrogen, COD, TOC, total solids, volatile solids and four metals. MPN data was collected for various bacterial groups (total plate count, anaerobic cellulose decomposers, and anaerobic acid producers) to monitor increases and declines in the leachate bacterial population. Physical and chemical testing provided comparisons between finished anaerobic compost and aerobic compost from the same three waste samples.     

基于三角白化权函数的城市工业污染灰色聚类评估——以江苏省为例

以工业＂三废＂（废气、废水和固体废弃物）为研究对象,选取废气、二氧化硫、烟尘、粉尘、废水、化学需氧量（COD）、氨氮、固体废弃物和危险废弃物等9个具体指标建立城市工业污染评价指标体系。基于三角白化权函数,将江苏省13个城市的工业污染情况分成不同灰类进行综合聚类评估。研究表明,受规模效应、结构效应和广义技术效应的影响,南京、苏州和无锡属于相对严重污染,常州、镇江、扬州、泰州、南通、淮安和徐州属于一般污染,盐城、宿迁和连云港属于相对轻微污染。     

Ramifications of solid waste disposal site relocation in urban areas of developing countries: a case study in Tanzania

Sanitary landfilling is considered to be the most appropriate means of final disposal of solid wastes. Currently in Tanzania, the cheapest method of developing a landfill is by making use of natural depressions or former borrow pits and mine pits. This paper examines the impacts associated with the relocation of a waste disposal site from a crude disposal site at Vingunguti to a new landfill site at New MECCO quarry in Kunduchi area, both in Dar es Salaam, Tanzania. The paper focuses on the fate of scavenging and solid waste recycling which are currently taking place at Vingunguti site and mining as well as food vending activities at the proposed new landfill site. Scavenging and waste recycling were found to be important sources of income for some individuals in the city. Various items collected for recycling were found to be an important source of raw materials for some industries in Dar es Salaam. A total of 94% of all the miners were entirely dependent on stone mining and crushing as a sole means of income generation, and 68% of the miners had practised this activity for between 1 and 9 years. Finally the paper recommends that, selection of a waste disposal site should favour abandoned mines or borrow pits rather than operational ones. It also recommends that, waste recycling and scavenging be accommodated in other stages of the waste stream since they can not be practised at a sanitary landfill.     

钻井废水酸化中和预处理研究

针对钻井废水悬浮物和CODCr含量高的污染特征,对其酸化中和预处理的可行性进行了实验研究,并对其作用机理进行了探讨,以浓H2SO4 调节pH至1.5,加入石灰乳中和使 pH为9,可使CODCr的去除率达到50%,悬浮物的去除率达到80%.处理可在废水池内进行,给下一步利用装置进行混凝处理创造了条件。