A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints

Modified 9Cr-1Mo (P91) steel is widely used in the construction of power plant components. In the present study, a comparative study on influence of activated flux tungsten inert gas (A-TIG), and gas tungsten arc (GTA) welding processes on the microstructure and the impact toughness of P91 steel welds was carried out. P91 steel welds require a minimum of 47 J during the hydrotesting of vessels as per the EN1557: 1997 specification. Toughness of P91 steel welds was found to be low in the as-weld condition. Hence post-weld heat treatment (PWHT) was carried out on weld with the objective of improving the toughness of weldments. Initially as per industrial practice, PWHT at 760 °C – 2 h was carried out in order to improve the toughness of welds. It has been found that after PWHT at 760 °C – 2 h, GTA weld (132 J) has higher toughness than the required toughness (47 J) as compared with A-TIG weld (20 J). The GTA weld has higher toughness due to enhanced tempering effects due to multipass welding, few microinclusion content and absence of δ-ferrite. The A-TIG weld requires prolonged PWHT (i.e. more than 2 h at 760 °C) than GTA weld to meet the required toughness of 47 J. This is due to harder martensite, few welding passes that introduces less tempering effects, presence of δ-ferrite (0.5%), and more alloy content. After PWHT at 760 °C – 3 h, the toughness of A-TIG weld was improved and higher than the required toughness of 47 J.     

Pauli,das Neutrino und die Entdeckung des Neutrons vor 50 Jahren

The story of the discovery of the neutrino as is well known, has been distorted by a number of legends. The factual information now available from the Pauli Correspondence shows the neutrino so to speak, as a by-product of a much more comprehensive revision of the foundations of physics, to which end the efforts of several great theoreticians were directed in order to overcome the theoretical difficulties confronting nuclear physics at the beginning of the 1930's. The well known letter from Pauli to the “radioactive ladies and gentlemen” outlines merely the properties of a particle postulated by this theory. Had the complete theory been revealed these would have won little attention because of the inherent difficulties it still contained. Nevertheless the predicted qualities of this hypothetical particle corresponded exactly with observational data and allowed in addition the preservation of the tried and tested conservation laws. Accordingly an incomplete theory led to a fruitful development in physics.     

Water input requirements of the rapidly shrinking Dead Sea

The deepest point on Earth, the Dead Sea level, has been dropping alarmingly since 1978 by 0.7 m/a on average due to the accelerating water consumption in the Jordan catchment and stood in 2008 at 420 m below sea level. In this study, a terrain model of the surface area and water volume of the Dead Sea was developed from the Shuttle Radar Topography Mission data using ArcGIS. The model shows that the lake shrinks on average by 4 km²/a in area and by 0.47 km³/a in volume, amounting to a cumulative loss of 14 km³ in the last 30 years. The receding level leaves almost annually erosional terraces, recorded here for the first time by Differential Global Positioning System field surveys. The terrace altitudes were correlated among the different profiles and dated to specific years of the lake level regression, illustrating the tight correlation between the morphology of the terrace sequence and the receding lake level. Our volume-level model described here and previous work on groundwater inflow suggest that the projected Dead Sea–Red Sea channel or the Mediterranean–Dead Sea channel must have a carrying capacity of >0.9 km³/a in order to slowly re-fill the lake to its former level and to create a sustainable system of electricity generation and freshwater production by desalinization. Moreover, such a channel will maintain tourism and potash industry on both sides of the Dead Sea and reduce the natural hazard caused by the recession.     

Process modification in the scouring process of textile industry

The effects of scouring parameters on the scouring efficiency, including the weight ratio of de-sizing agent and fabric (5–80 g/g fabric), temperature of de-sizing agent tank (60–90 °C) and dipping time (2–8 s), were investigated. The results demonstrated that weight loss of sizing agent was significantly observed only in the de-sizing agent tank particularly in the first de-sizing tank and was found to a small extent in water tank. The optimum condition in the scouring machine was found at a de-sizing agent to fabric ratio of 20 g/g fabric, with a temperature of the first de-sizing agent tank of 80 °C, a temperature of the second de-sizing agent tank of 90 °C, and dipping time of fabric of 7 s. According to these conditions, more than 89% of the sizing agent was eliminated and only 3.52 mg/g fabric of sizing agent remained in the scoured fabric which was in an acceptable range for feeding to the down stream process known as dyeing process. Application of our results to actual textile plant has shown that there is a cost reduction due to improved utilization of rinse water, chemicals and energy in the process and consequent decreases in the generation of wastewater. Furthermore, the production capacity was increased from 30 m/min to 34.4 m/min.     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

On the relationship between PM2.5 concentrations and regional-scale primary PM emissions for the United Kingdom: an issue of subsidiarity

A site-specific particulate matter PM source apportionment model has been used to estimate the contributions from local primary PM emissions, regional primary PM emissions and the regional background to PM_2.5 concentrations at 102 monitoring site locations and to the centres of 1 km × 1 km grid squares across the United Kingdom. The local primary PM contributions have then been compared with Europe-wide urban PM_2.5 increments estimated at 50 km × 50 km in European-scale integrated assessment models. It is concluded that Europe-wide PM increments used in policy analyses grossly underestimate urban PM concentrations obtained from the site-specific PM source apportionment model for the United Kingdom. Europe-wide urban PM_2.5 increments estimated at 5 km × 5 km scale are significantly improved, particularly for London, but underestimate those for smaller towns and cities by factors of 2–3. These underestimations have important air quality policy ramifications. Although environmental policies may well be best formulated at the European scale, the underpinning air quality modelling may be best carried out at the local scale.     

Spatial and long-term variability of soil loss due to crop harvesting and the importance relative to water erosion: A case study from Belgium

The harvest of crops such as sugar beet (Beta vulgaris L.), potato (Solanum tuberosum L.), leek (Allium porrum L.) and carrot (Daucus carota L.) causes soil loss from arable land because soil adhering to the crop and soil clods that failed to be separated by the harvesting machine, are exported from the field together with these harvested crops. These soil losses can be of the same order of magnitude as soil losses caused by water erosion processes, but are often neglected in soil erosion research. In this article we developed a methodology to investigate the spatial and long-term (1846–2004) variability of soil loss due to crop harvesting (SLCH) in Belgium and the spatial distribution of the importance of SLCH relative to soil losses caused by water erosion processes in Flanders. The study is based on long-term time series of soil tare data of crop processing factories and area and crop yield statistics. Until the middle of the 20th century, potato and roots and tubers grown as second crop, had the largest share in the SLCH-crop growing area in Belgium. Sugar beet gained importance from the end of the 19th century onwards and has now, of all SLCH crops, the largest growing area. We could estimate that, partly due to increasing crop yields and the mechanisation of the harvesting process, SLCH per hectare of cropland increased from 0.4 Mg ha⁻¹ year⁻¹ in 1846 to 2.4 Mg ha⁻¹ year⁻¹ in the 1970s and early 1980s. Since then mean annual soil losses decreased again to 1.8 Mg ha⁻¹ year⁻¹ in 2004. It was assessed that total yearly SLCH in Belgium rose from more than 575,000 Mg in the middle of the 19th century to more than 1.7 × 10⁶ Mg in the 1970s and early 1980s, while current SLCH values are 1.4 × 10⁶ Mg. We estimated that since 1846, more than 163 × 10⁶ Mg soil was exported from cropland in Belgium through this erosion process, which corresponds to 109 hm³ or an average soil profile truncation of 1.15 cm. Average sediment export from cropland in Flanders was 3.7 Mg ha⁻¹ year⁻¹ in 2002, of which 46% was due to SLCH and 54% was due to water erosion processes. The relative importance of SLCH varied, depending on the agricultural region, between 38% and 94%.     

3-Hydroxy-2-butanone and the first encounter fight in the male lobster cockroach, Nauphoeta cinerea

Although agonistic behavior in the male lobster cockroach, Nauphoeta cinerea, has been known for more than 40 years, this is the first study to directly collect and quantify the emitted pheromones. In the present study, emitted volatile pheromones were collected from each male pair for 60 min during the first encounter fight and identified and quantified by gas chromatography–mass spectrometry. The major compound collected was 3-hydroxy-2-butanone (3H-2B). The strength of the attack by the dominant male was classified into three categories from weakest (C) to strongest (A). Of the 92 pairs, eight (8.7%) showed no agonistic interactions, and the amount of 3H-2B collected was 121.8±37.7 ng/male pair. In the five pairs (5.4%) displaying attack strength C, the amount of 3H-2B collected was 689.6±273.7 ng/male pair, and the attack duration was 9.6±2.4 min. In the 53 pairs (57.6%) showing attack strength B, the corresponding values were 5396.2±449.0 ng/male pair and 22.7±1.6 min, while those for the 26 pairs (28.3%) showing attack strength A were 7910.4±1120.6 ng/male pair and 24.9±2.9 min. For both attack strengths A and B, a linear relationship was found between the amount of 3H-2B collected and attack duration, suggesting that the longer the duration of the attack, the more 3H-2B was emitted. In addition, the rate of 3H-2B emission for attack strength A was significantly higher than that for attack strength B. Using Vaseline-coating, we demonstrated that, in the first encounter fight, the 3H-2B was emitted by the dominant male.     

Efficiency of ASTM Method D4994-89 for Recovery of Enteric Viruses from Biosolids

The ASTM Method D4994-89 has been used in the United States for almost two decades to assess the virological quality of biosolids. However, the efficiency of this method for recovery of different enteric viruses has never been determined. The method was found to recover several different enteroviruses and adenovirus 2 with an efficiency ranging from 18.1 ± 5.5 to 24.6 ± 7.8%.     

Dairy farm CH4 and N2O emissions,from one square metre to the full farm scale

The greenhouse gas emissions from agricultural systems contribute significantly to the national budgets for most countries in Europe. Measurement techniques that can identify and quantify emissions are essential in order to improve the selection process of emission reduction options and to enable quantification of the effect of such options. Fast box emission measurements and mobile plume measurements were used to evaluate greenhouse gas emissions from farm sites. The box measurement technique was used to evaluate emissions from farmyard manure and several other potential source areas within the farm. Significant (up to 250 g CH₄ m⁻² day⁻¹and 0.4 g N₂O m⁻² day⁻¹) emissions from ditches close to stables on the farm site were found.Plume emission measurements from individual manure storages were performed at three sites. For a manure storage with 1200 m³ dairy slurry in Wageningen emission factors of 11 ± 5 g CH₄ m⁻³ manure day⁻¹ and 14 ± 8 mg N₂O m⁻³ manure day⁻¹ were obtained in February 2002.Mobile plume measurements were carried out during 4 days at distances between 30 and 300 m downwind of 20 different farms. Total farm emissions levels ranged from 14 to 95 kg CH₄ day⁻¹ for these sites. Expressed as emission per animal the levels were 0.7 ± 0.4 kg CH₄ animal⁻¹ day⁻¹ for conventional farms. For three farms that used straw bedding for the animals1.4 ± 0.2 kg CH₄ animal⁻¹ day⁻¹ was obtained. These factors include both respired methane and emission from manure in the stable and the outside storages.For a subset of these farms the CH₄ emission was compared with monthly averaged model emission calculations using FarmGHG. This model calculates imports, exports and flows of all products through the internal chains on the farm using daily time steps. The fit of modelled versus measured data has a slope of 0.97 but r² = 0.27. Measurements and model emission estimates agree well on average, for large farms within 30%. For small farms the differences can be up to a factor of 3. CH₄ emissions during winter seem to be underestimated.     

An epicuticular multilayer reflector generates the iridescent coloration in chrysidid wasps (Hymenoptera, Chrysididae)

Chrysidid wasps in the subfamily Chrysidinae are brood parasitoids or cleptoparasites of other insects and famous for their cuticular iridescence. In this study, we examine the dorsal abdominal cuticle of the chrysidid wasp Hedychrum rutilans to identify the underlying color mechanism. Using scanning electron microscopy, reflectance spectral analysis, and theoretical calculations, we demonstrate the presence of an epicuticular multilayer reflector consisting of six lamellae with a thickness of 185 nm each. The lamellae exhibit a rough surface probably functioning as spacers between the individual layers. The reflector has a measured reflectance maximum at λ = 630 nm, i.e., in the red part of the visible spectrum of light at normal incidence and the reflectance maximum shifts to green as the angle of incidence increases. Complementary theoretical modeling corroborates the view that the epicuticular multilayer generates the iridescent color of the chrysidid cuticle. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Influence of no-tillage on the distribution and lability of phosphorus in Finnish clay soils

No-tillage (NT) is a method adopted to reduce erosion and particulate phosphorus (P) load from arable land to watercourses. However, it has been found to increase the loss of dissolved P with surface runoff, but the reasons for that have rarely been examined in detail. The objective of the present study was to determine the chemical factors explaining this response by investigating the impact of NT on the type and distribution of P reserves as well as on organic carbon (C) in the 0–35 cm topsoil layer of clay soil profiles (Vertic Cambisols). Soil samples were taken from two experimental fields (Jokioinen and Aurajoki) at 0–5, 5–20 and 20–35 cm depths in conventionally tilled (CT) and non-tilled (for 4–5 years) plots. The plots had been cultivated and fertilized according to the common field practices in Finland (15–18 kg P and 100–128 kg N ha⁻¹ year⁻¹).Inorganic and organic P reserves characterized by a modified Chang and Jackson fractionation procedure were not significantly affected by the cultivation methods. However, in the uppermost soil layer (0–5 cm) in NT of the Jokioinen field, the labile P determined by water extraction (P_w) increased significantly, whereas the increase in P extracted with acid ammonium acetate (P_AAC) remained statistically insignificant. The increase in labile P coincided with a significant increase in organic carbon (C), which supports the theory that competition between organic anions and phosphate for the same sorption sites on oxide surfaces will enhance the lability of soil P. In the Aurajoki field with distinct soil cracking, P_w and P_AAC were not affected by NT in the uppermost soil layer, but they increased in the deepest soil layer (20–35 cm) concomitantly with an increase in Al-bound P and organic C. However, the increases were not statistically significant. In both fields, soil acidification due to the repeated application of N fertilizers at a shallow soil depth as well as the accumulation of organic C lowered pH of the uppermost soil layer in NT compared to the deeper soil layers. The results indicated that even short-term NT can increase the labile P in clay soil. However, further studies are needed to assess the long-term changes in lability of surface soil P and, consequently, the possible need for readjustment of the fertilization level in NT.     

Strategies for reducing the environmental impact of reprocessing mercury-contaminated tailings in the artisanal and small-scale gold mining sector: insights from Tapajos River Basin,Brazil

Worldwide, the environmental impacts of artisanal and small-scale gold mining (ASGM) are extensive. Annual losses from mercury, which is used to amalgamate gold, are in the range of 1000 tonnes, and at advanced sites, there is the additional threat of cyanide contamination.Recent developments in The Brazilian Amazon, an area populated by 200,000 small-scale gold miners, have the potential to reduce these impacts considerably. In the locality of Garimpo Ouro Roxo, miners are presently using amalgamation and cyanidation in vat-leaching. Each cycle typically recovers 50% of the gold and lasts 20 days (per tank), consuming around 3300 kg NaCN/month. A new process has been developed and implemented in a pilot plant in this area, involving gravity concentration followed by cyanidation in a ball mill. Concentrate leaching is conducted with a PVC capsule filled with activated carbon inserted in the cyanide solution in the mill. The cycle takes less than 24 h and recovers up to 98% of the gold in the concentrate. The main advantages of wide adoption of this method, apart from a reduced gold recovery cycle and improved recovery, include possible phase out of amalgamation altogether, and marked reductions in cyanide consumption (from current 22,000 kg–980 kg annually).     

Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

Life cycle assessment of milk produced in two smallholder dairy systems in the highlands and the coast of Peru

Life Cycle Assessment (LCA) was applied to two smallholder milk production systems in Peru in order to evaluate the environmental burden of milk produced in each. An Andean highland milk production system where livestock feeding is restricted to permanent pastures supplemented with on farm grown ryegrass-clover was opposed to a coastal system with dairy cows fed a diet consisting of fodder maize and purchased concentrate. Milk production levels (kg/cow day) differed considerably with 2.57 for the highland and 19.54 for the coastal system. A Life Cycle Inventory was calculated for the functional unit of 1 kg energy corrected milk (ECM) and the environmental impacts global warming, acidification and eutrophication were estimated for 1 kg ECM, 1 ha and 1 animal, considering the multi-functionality of the system. The highland system was characterized by a high land use (23.1 m²a/kg ECM vs. 1.71 m²a/kg ECM at the coast). Irrigation water and energy were on the other hand used to a much higher amount at the coast (7291 l/kg ECM and 8791 MJ/kg ECM, respectively) than in the highlands (848 l/kg ECM and 0.20 MJ/kg ECM). Global warming potential, acidification and eutrophication were higher for 1 kg ECM produced in the highlands than at the coast by 10.6 kg CO₂ equivalents, 6.58 g sulfur dioxide equivalents and 10.63 g phosphate equivalents, respectively. Nevertheless, 5220 kg CO₂ equivalents more were emitted per animal at the coast than in the highlands. Also acidification and eutrophication were estimated to be on average 6 and 4 times higher at the coast compared to the highlands when expressed for the functional units of 1 ha and 1 animal.

Results

Whereas livestock is mainly responsible for impacts on the environment in the highlands, at the coast both livestock related emissions and forage cultivation play an important role. Furthermore CO₂ releases from soybean cultivations heavily contribute to total emissions. Sensitivity analysis indicates that for dairy systems relying on crop by-products as feed the choice of the allocation method is a crucial point in a LCA study. Based on the results of this study, strategies in order to reduce the environmental burden of milk production should focus on an increase of production levels and a reduction of methane emissions from enteric fermentation in the highlands and a modification of the concentrate components replacing soya as the protein source at the coast.     

Risky business: Engaging the public on sea level rise and inundation

To examine whether U.S. public opinion may become as sharply polarized on adaptation responses as it has been on mitigation policies, we surveyed a sample of urban coastal residents in Maryland (n = 378). We then tested the impact of a community deliberative event (n = 40) with small-group sea level rise discussions as a depolarization strategy. Cultural worldviews which contribute to politically polarized beliefs about climate were predictive of perceptions of sea level rise risk. Living close to flooding hazards also significantly predicted respondents’ perceptions of household or neighborhood risks, but not of risks to the entire county. The event significantly increased topic knowledge among all participants and, among those with a worldview predisposing them to lower risk perceptions, significantly increased problem identification and concern about impacts. These results suggest small-group deliberation focused on local problem-solving may be an effective tool for reducing the polarizing effects of cultural worldviews on decision-making.     

Soil-profile organic carbon and total nitrogen during 12 years of pasture management in the Southern Piedmont USA

Soil organic C (SOC) and total soil N (TSN) sequestration estimates are needed to improve our understanding of management influences on soil fertility and terrestrial C cycling related to greenhouse gas emission. We evaluated the factorial combination of nutrient source (inorganic, mixed inorganic and organic, and organic as broiler litter) and forage utilization (unharvested, low and high cattle grazing pressure, and hayed monthly) on soil-profile distribution (0–150 cm) of SOC and TSN during 12 years of pasture management on a Typic Kanhapludult (Acrisol) in Georgia, USA. Nutrient source rarely affected SOC and TSN in the soil profile, despite addition of 73.6 Mg ha^?1 (dry weight) of broiler litter during 12 years of treatment. At the end of 12 years, contents of SOC and TSN at a depth of 0–90 cm under haying were only 82 ± 5% (mean ± S.D. among treatments) of those under grazed management. Within grazed pastures, contents of SOC and TSN at a depth of 0–90 cm were greatest within 5 m of shade and water sources and only 83 ± 7% of maximum at a distance of 30 m and 92 ± 14% of maximum at a distance of 80 m, suggesting a zone of enrichment within pastures due to animal behavior. During 12 years, the annual rate of change in SOC (0–90 cm) followed the order: low grazing pressure (1.17 Mg C ha^?1 year^?1) > unharvested (0.64 Mg C ha^?1 year^?1) = high grazing pressure (0.51 Mg C ha^?1 year^?1) > hayed (?0.22 Mg C ha^?1 year^?1). This study demonstrated that surface accumulation of SOC and TSN occurred, but that increased variability and loss of SOC with depth reduced the significance of surface effects.     

Specific dynamic action affects the hydrostatic pressure tolerance of the shallow-water spider crab <Emphasis Type="Italic">Maja brachydactyla</Emphasis>

The bathymetric distribution of marine benthic invertebrates is likely governed by a combination of ecological and physiological factors. The present study investigates oxygen consumption and heartbeat rate in response to attempted feeding at 1, 100 and 150 atm in the shallow-water spider crab, Maja brachydactyla, from temperate European waters. No significant difference was evident between the resting heartbeat rate of specimens at 1 or 100 atm, which were 56 and 65 bpm, respectively (Mann–Whitney, U = 5382.0; n = 95, 98; p = 0.079). However, at 150 atm the resting heartbeat rate was significantly higher than that observed for 100 atm at 108 bpm (Mann–Whitney, U = 149.0; n = 45, 98; p < 0.001). At 150 atm, feeding was never observed and coupled with the elevated resting heartbeat rate; it is suggested by 150 atm continued survival is unfeasible. At 1 and 100 atm, feeding instigated a distinct increase in heartbeat rate, which remained elevated for over 30 h. This increase peaked within 1 h at 1 atm. At 100 atm, this required 4 h and postprandial oxygen consumption was significantly higher than at 1 atm (Kruskal–Wallis, H = 85.036; df = 2; p < 0.001). Elevated hydrostatic pressure is hypothesized to extend the duration and the total metabolic energy devoted to specific dynamic action. The metabolic requirements of feeding under hyperbaric conditions may even reach such a critical demand that feeding is entirely inhibited.