Modeling attitudes and perceptions as predictors for changing safety margins during organizational change

This study describes the relations between different dimensions of leadership commitment, safety climate and attitudes toward change, and how these affect employee perceptions of safety during organizational change in a high risk environment. We collected data from a European national air navigation services provider during a volatile 3-year corporatization process that ended in the sudden collapse of a deliberate change implementation project. Surprisingly, despite visible signs of internal and external stress caused by the volatile and disruptive change process, we did not observe any change in the traditional safety metrics of incident and accident reporting during the study. The study is based on a large survey (n = 422) of individual attitudes and perceptions of safety climate, perception of leadership commitment to safety, attitudes to organizational change, and perception of safety. The data support the claim that perception of safety at least, in part, depends on individual perceptions of the leadership’s commitment to safety, and the safety climate in place at a given point in time. The model shows how employee perceptions of the leadership’s commitment to safety and safety climate are related to both attitudes toward change, and to perceived safety.     

Safety compliance climate concerning risk assessment and preventive measures in EU legislation: A Finnish survey

The aim of the present study is to explore the process dynamics of the safety compliance climate and work relationships, including their antecedents and consequences. After investigating the many dimensions of safety compliance climate and of work relationships, the study concludes that a multi-component measure is needed to fully assess all of their dimensions. With respect to the impacting positively on safety compliance legislation, the present study found the following factors: “contribution measures”, “concrete preventive measures” and “risk assessment process”. For risk assessment factors on safety compliance the study identified “planning, guidelines, policy, management”, “prioritization of proactive measures”, “results in cooperation and information” and “active use of risks assessment document”. In a regression model for the workers, both risk assessment process and contribution measures had a statistically highly significant (p < 0.001) effect on concrete preventive measures. In the regression analysis of the employers risk assessment process had a statistically significant (p < 0.01) effect and contribution measures had a statistically highly significant (p < 0.001) effect on concrete preventive measures.     

Perspectives on safety: The impact of group membership,work factors and trust on safety performance in UK and Norwegian drilling company employees

This study is anchored in a contractor company providing well services for platform drilling on the Norwegian (NCS) and the UK Continental Shelves (UKCS). The research project has as its point of departure the potential influences of group level characteristics, structural work factors, trust, and safety behaviour on safety performance. Do perceptions and performance differ across Shelves? Are “nomadic” groups or employees that have more unpredictable shift rotations more exposed to accidents than others? Is high trust and sound safety behaviour enhancing good safety performance? The results are based on questionnaire data from two samples of personnel distributed across three installations on the UKCS and nine on the NCS with a response rate of 67%: N = 170 (UKCS) and N = 621 (NCS). In addition, two focus group interviews were held in each country, with 15 participants in each. The results show that our model makes sense. Shelf shows a significant influence on safety performance in all but the final stage in our five-step logistic regression model, indicating that the effect may be mediated by safety compliance and safety participation. Installations and different work teams have different exposure and structural work factors matter significantly. Somewhat counter-intuitively, employees who have a “nomadic” status and who hold the least regular shift rotations appear to have a lower risk of being involved in incidents. High trust in workmates buffers against incident involvement and the same applies for high safety compliance. The results, challenges and implications for research and safety practitioners are discussed.     

Educational status and organizational safety climate: Does educational attainment influence workers’ perceptions of workplace safety?

From a practical perspective, understanding the impact of education on perceptions of workplace safety would benefit management’s decisions regarding workers’ adaptability, general work effectiveness, accident frequency, implementation of safety management policies, and handling of education-related accident characteristics. The current study thus examined the relationship between educational attainment and (i) safety perception, (ii) job satisfaction, (iii) compliance with safety management policies, and (iv) accident frequency. Participants were Ghanaian industrial workers (N = 320) categorized into four educational groups based on their responses: basic education 50% (n = 159); secondary education, n = 98 (30%); vocational/professional education, 17% (n = 56); and university education, 3% (n = 7). Workplace safety perception was assessed with Hayes et al.’s 50-item Work Safety Scale (WSS): a scale that effectively captures the dimensions identified by safety experts to influence perceptions of workplace safety. Multivariate analysis (MANOVA) was used to test for differences of statistical significance. Posterior comparison with t-test consistently revealed significant differences between the two higher-educated cohorts and their lower-educated counterparts. The results indicated a positive association between education and safety perception. Higher-educated workers recorded the best perceptions on safety, indicated the highest level of job satisfaction, were the most compliant with safety procedures and recorded the lowest accident involvement rate.     

Work-related driving safety in light vehicle fleets: A review of past research and the development of an intervention framework

This paper presents a critical review of past research in the work-related driving field in light vehicle fleets (e.g., vehicles < 4.5 tonnes) and an intervention framework that provides future direction for practitioners and researchers. Although work-related driving crashes have become the most common cause of death, injury, and absence from work in Australia and overseas, very limited research has progressed in establishing effective strategies to improve safety outcomes. In particular, the majority of past research has been data-driven, and therefore, limited attention has been given to theoretical development in establishing the behavioural mechanism underlying driving behaviour. As such, this paper argues that to move forward in the field of work-related driving safety, practitioners and researchers need to gain a better understanding of the individual and organisational factors influencing safety through adopting relevant theoretical frameworks, which in turn will inform the development of specifically targeted theory-driven interventions. This paper presents an intervention framework that is based on relevant theoretical frameworks and sound methodological design, incorporating interventions that can be directed at the appropriate level, individual and driving target group.     

Association between safety leading indicators and safety climate levels

ObjectivesThe aim of this study was to evaluate the association of leading indicators for occupational health and safety, particularly safety inspections and non-compliances, with safety climate levels.MethodsNordic Occupational Safety Climate Assessment Questionnaire was employed to evaluate safety climate in cross-sectional design. The geographically diverse population of the inspection body made it possible to conduct the survey across 10 provinces in Iran. 89 completed questionnaires were obtained with a response rate of 47%. Except for management safety justice, the internal consistency of other six dimensions was found to be acceptable (α ≥ 0.7).ResultsMean scores of dimensions ranged from 3.50 in trust in the efficacy of safety systems (SD = 0.38) to 2.98 in workers' safety priority and risk non-acceptance (SD = 0.47). Tukey HSD tests indicated a statistically significant difference of mean scores among groups undergoing different number of safety inspections and those receiving different number of non-compliances (p < 0.05), with no significant differences based on safety training man-hours and sessions (p > 0.05). Spearman's rank-order correlation showed no relationship between work experience and number of non-compliances (correlation coefficient = − 0.04, p > 0.05) and between safety training man-hours and number of non-compliances (correlation coefficient = − 0.15, p > 0.05).ConclusionsOur results indicate that safety climate levels are influenced by number of safety inspections and the resultant non-compliances.Practical applicationsFindings suggest that safety non-compliances detected as a result of conducting safety inspections could be used to monitor the safety climate state. Establishing plans to conduct scheduled safety inspections and recording findings in the form of safety non-compliance and monitoring their trend could be used to monitor levels of safety climate.     

The FarmSafe Programme in New Zealand: Process evaluation of year one (2003)

A national programme to raise awareness of safety issues for farmers and farmworkers and reduce farmwork-related injuries (FarmSafe) has been implemented in New Zealand since late 2002. The aims of this paper are to describe the implementation of the first stage of this FarmSafe Programme in 2003, present findings from the process evaluation for the first stage, and place this evaluation in the context of a larger and longer-term evaluation programme. Semi-structured interviews were conducted with key members of the five agencies responsible for the programme, with workshop facilitators (n = 6), and with farmers and farmworkers (n = 29) who had participated in the first stage workshop (FarmSafe Awareness workshop). All workshop evaluation forms were analysed for workshop and facilitator quality. Participant numbers (n = 6341) in the FarmSafe workshop exceeded expectations for 2003. Methods of recruitment, and organisational structure and support were major contributors to high participation in the workshop, as was the ongoing quality of the workshop offered. This process evaluation indicates the programme was successful in achieving widespread participation in a safety training programme within an industry that is predominantly one of self-employment or small businesses, and that is renowned for its independence and geographical isolation.     

The relationship between patient safety climate and occupational safety climate in healthcare – A multi-level investigation

IntroductionPatient safety climate/culture is attracting increasing research interest, but there is little research on its relation with organizational climates regarding other target domains.The aim of this study was to investigate the relationship between patient safety climate and occupational safety climate in healthcare.MethodThe climates were assessed using two questionnaires: Hospital Survey on Patient Safety Culture and Nordic Occupational Safety Climate Questionnaire. The final sample consisted of 1154 nurses, 886 assistant nurses, and 324 physicians, organized in 150 work units, within hospitals (117 units), primary healthcare (5 units) and elderly care (28 units) in western Sweden, which represented 56% of the original sample contacted.ResultsWithin each type of safety climate, two global dimensions were confirmed in a higher order factor analysis; one with an external focus relative the own unit, and one with an internal focus. Two methods were used to estimate the covariation between the global climate dimensions, in order to minimize the influence of bias from common method variance. First multilevel analysis was used for partitioning variances and covariances in a within unit part (individual level) and a between unit part (unit level). Second, a split sample technique was used to calculate unit level correlations based on aggregated observations from different respondents. Both methods showed associations similar in strength between the patient safety climate and the occupational safety climate domains.ConclusionsThe results indicated that patient safety climate and occupational safety climate are strongly positively related at the unit level, and that the same organizational processes may be important for the development of both types of organizational climate.Practical applicationsSafety improvement interventions should not be separated in different organizational processes, but be planned so that both patient safety and staff safety are considered concomitantly.     

Differences in risk perception,priorities, worry and demand for risk mitigation in transport among Norwegians in 2004 and 2008

The present study aimed to investigate differences in risk perception, the demand for risk mitigation, priorities and worry related to transport among the Norwegian public in 2004 and 2008. Age, gender, education, driver licence and number of injuries in transport were controlled for. The comparison was carried out with questionnaire surveys among representative samples of the Norwegian public in 2004 (n = 1730) and 2008 (n = 1864). The results showed that the perceived probabilities of transport accidents decreased, whereas the perceived severity of consequences increased during this period. Both samples estimated higher probabilities of accidents by private means of transport. The demand for risk mitigation and priorities related to transport safety increased significantly in the same period. The 2008 sample also reported more worry regarding accidents by private transport. Results were discussed in relation to transport safety campaigns, safety measures and significant accidents which occurred in this period.     

Prevention of occupational injuries: Evidence for effective good practices in foundries

IntroductionOccupational injuries are a relevant research and practical issue. However, intervention studies evaluating the effectiveness of workplace injury prevention programs are seldom performed. Method: The effectiveness of a multifaceted intervention aimed at reducing occupational injury rates (incidence/employment-based = IR, frequency/hours-based = FR, severity = SR) was evaluated between 2008 and 2013 in 29 Italian foundries (22 ferrous; 7 non-ferrous; 3,460 male blue collar workers/year) of varying sizes. Each foundry established an internal multidisciplinary prevention team for risk assessment, monitoring and prevention of occupational injuries, involving employers, occupational physicians, safety personnel, workers' representatives, supervisors. Targets of intervention were workers, equipment, organization, workplace, job tasks. An interrupted time series (ITS) design was applied. Results: 4,604 occupational injuries and 83,156 lost workdays were registered between 2003 and 2013. Statistical analysis showed, after intervention, a reduction of all injury rates (− 26% IR, − 15% FR, −18% SR) in ferrous foundries and of SR (− 4%) in non-ferrous foundries. A significant (p = 0.021) ‘step-effect’ was shown for IR in ferrous foundries, independent of secular trends (p < 0.001). Sector-specific benchmarks for all injury rates were developed separately for ferrous and non-ferrous foundries. Conclusions: Strengths of the study were: ITS design, according to standardized quality criteria (i.e., at least three data points before and three data points after intervention; clearly defined intervention point); pragmatic approach, with good external validity; promotion of effective good practices. Main limitations were the non-randomized nature and a medium length post-intervention period. In conclusion, a multifaceted, pragmatic and accountable intervention is effective in reducing the burden of occupational injuries in small-, medium- and large-sized foundries. Practical Applications: The study poses the basis for feasible good practice guidelines to be implemented to prevent occupational injuries, by means of sector-specific numerical benchmarks, with potentially relevant impacts on workers, companies, occupational health professionals and society at large.     

Managers’ attitudes towards safety measures in the commercial road transport sector

Safety measures and related costs and benefits have been widely discussed and analysed in academic circles and by the authorities and industrial sectors. The study reported in this paper addresses these aspects from a cognitive based perspective. Risk management is about dealing with the conflict between production and safety. Enterprises which spend too much on safety will meet bankruptcy, and those not concerned with safety measures will meet with severe accidents and related damage. Inspired by James Reason’s theoretical framework, managers (n = 106) of commercial transport enterprises were asked about their attitudes towards safety management, what factors have contributed and their belief that further effort and investments in health, environment and safety (HES) measures will pay off. One half of the managers perceive HES work as too expensive and approximately one quarter assess mandatory HES work as compromising their competitiveness. One third of the managers do not find further safety measures than those already implemented necessary or remunerative. They claim that there are no other alternative ways of doing their activities and that there are no technical measures available that could meet outstanding safety challenges. Managers do acknowledge HES work as important for the reputation of the enterprise. The factor analysis gave five HES attitude factors: (I) concerned with formalities, (II) HES work improves health, environment and safety, (III) HES work is ineffective, (IV) HES regulation is appropriate, and (V) HES work can be improved.     

Safety compliance and safety climate: A repeated cross-sectional study in the oil and gas industry

IntroductionViolations of safety rules and procedures are commonly identified as a causal factor in accidents in the oil and gas industry. Extensive knowledge on effective management practices related to improved compliance with safety procedures is therefore needed. Previous studies of the causal relationship between safety climate and safety compliance demonstrate that the propensity to act in accordance with prevailing rules and procedures is influenced to a large degree by workers' safety climate. Commonly, the climate measures employed differ from one study to another and identical measures of safety climate are seldom tested repeatedly over extended periods of time. This research gap is addressed in the present study.MethodThe study is based on a survey conducted four times among sharp-end workers of the Norwegian oil and gas industry (N = 31,350). This is done by performing multiple tests (regression analysis) over a period of 7 years of the causal relationship between safety climate and safety compliance. The safety climate measure employed is identical across the 7-year period.ConclusionsTaking all periods together, the employed safety climate model explained roughly 27% of the variance in safety compliance. The causal relationship was found to be stable across the period, thereby increasing the reliability and the predictive validity of the factor structure. The safety climate factor that had the most powerful effect on safety compliance was work pressure.Practical applicationsThe factor structure employed shows high predictive validity and should therefore be relevant to organizations seeking to improve safety in the petroleum sector. The findings should also be relevant to other high-hazard industries where safety rules and procedures constitute a central part of the approach to managing safety.     

Car safety and social differences in traffic injuries among young adult drivers: a study of two-car injury-generating crashes in Sweden

Objective—The study examines whether socioeconomic and sex differences in road-traffic crashes leading to injury vary according to car-safety level.Method—Individuals records of subjects born 1970–1972 registered in the Swedish Census of 1985 (n = 334,070) are linked to road-traffic-crash data for the period 1988–2000 for first police-registered two-car crashes leading to severe or fatal injury (n = 4875). Injuries are split into categories according to level of car safety on a five-point scale, based on criteria related to crash safety. Account is taken of both how the car is constructed and the effectiveness of its safety equipment (such as airbags and seat belts). For each car-safety level, relative risks are computed considering socioeconomic groups of origin, educational level, and sex.Results—No substantial differences between drivers in different socioeconomic positions of origin is observed except for crashes involving cars 30% better than average with regard to safety. There are consistent risk differences across all car-safety categories according to educational level. Male drivers show an elevated risk of injury in all car categories, except for cars with the poorest safety where they are at significant under-risk.Conclusions—Car-safety level impacts on social differences in road-traffic injury risks in specific and restricted manners. Car-safety development is an important factor in improved road safety, but it may not benefit all to the same extent.     

Exploratory study on safety climate in Chinese manufacturing enterprises

This study was conducted in eastern cities of China; 1060 employees were sampled from 144 enterprises located in East China, and 796 (75.1%) responded validly. The level of safety climate of Chinese manufacturing enterprises as well as the differences in safety climate between large enterprises and small and medium-sized enterprises (SMEs) were examined. This study revealed that the safety climate level that the employees’ perceived was rather low in Chinese manufacturing enterprises, and differences in terms of mean scores of total safety climate, factors composing the safety climate, and items to measure this climate between large enterprises and SMEs were statistically significant (at p < 0.05). Among all the factors, the largest difference between large enterprises and SMEs was the employees’ perception of safety training, followed by management support. It suggests that SMEs should pay more attention to safety training and management support to improve the safety climate.     

Reporting practices in merchant shipping,and the identification of influencing factors

The objective of this paper is to identify the factors determining the reporting frequency of experience data e.g. incidents and accidents. The empirical setting is the Norwegian controlled merchant fleet. Data were collected from a survey carried out in 2006, where 1262 questionnaires were gathered from 76 vessels. The data were subjected to explorative factor analysis, method of principal component and varimax rotation. Seven factors, representing latent dimensions of safety culture, were extracted. Internal consistency (Cronbach Alpha) and scale reliability were found to be acceptable. The factor scores were used in an ordered logistic regression to examine the factors’ relationships to reporting frequency. The results show that enhanced safety related training, a trusting and open relationship among the crew, safety oriented ship management, performance of pro-active risk identification activities and feedback on reported events all are significantly related to higher reporting frequency. On the other hand, demand for efficiency and lack of attention to safety from shore personnel, are significantly related to lower reporting frequency. The results also show a significantly lower reporting frequency among those who have worked with their local manager less than 1 year. Bulk and dry cargo vessels also show significantly lower reporting frequency than those working on liquid bulk carriers.     

The typology for allocations of societal risk and safety management tasks at the local governmental level – Framing the current directions in Sweden

The starting point for this article is the need to develop empirical insights about contemporary societal risk and safety management practice and executive structures. In order to facilitate insights about societal risk and safety management in a Scandinavian welfare context we use Sweden and its local governmental level (municipal) as an empirical frame in this paper. The aim for this article is to analyse how a variety of risk and safety management tasks are divided within the Swedish municipalities. The objectives are to frame the current directions for internal allocations of risk and safety issues by providing an empirically based executive typology and to contemplate the implications and future research needs that arise from that management pattern.The analysis is based on statistical analysis of information from a web-survey with chief officials (n = 1283) with responsibilities for different municipal functions and sectors. In this study the responses to one of the survey questions are used for statistical analysis. The analyzed question focused on the degree that the respondents estimated that their administrative sector or function handled a selection of risk and safety management assignments (n = 45). A factor analysis was applied to identify patterns in the dataset. The analysis resulted in an eight factor solution with a high degree of explained variance (74.3%). The results provide an elementary contribution to the understanding of the current societal risks and safety management directions.     

Protective factors associated with young passenger intervening in risky driving situations

IntroductionWhile the negative influence of passengers on driving is usually studied, young passengers may protect against young drivers' crash involvement by speaking out and trying to stop unsafe driving behavior. This study sought to examine psychosocial constructs of young passengers who are likely to intervene in their friends' risky driving.MethodUniversity students aged 17 to 25 years who were single (n = 123) or in a romantic relationship (n = 130) completed an online survey measuring protective factors.ResultsThe combination of individual, friend and (for participants in a relationship) romantic partner protective factors predicted self-reported passenger intervening intentions.Impact on IndustrySince peer passengers often increase young drivers' crash risk, research on passenger intervening has significant implications for road safety strategies. The findings provide support for the operationalization of protective factors in strategies that target passenger intervening behavior.     

Better effect of the use of a needle safety device in combination with an interactive workshop to prevent needle stick injuries

ObjectivesThis study compares the effectiveness of two types of interventions with no intervention on the prevention of needle stick injuries (NSIs).MethodsHealth care workers, who were at risk for NSIs, were eligible for this three-armed cluster randomized controlled trial. In total, 23 hospital wards were randomly assigned to 1 of 2 intervention groups, which were given either a needle safety device and a workshop (NW; 7 wards, n = 267) or a workshop only (W; 8 wards, n = 263), or to a control group (C; 8 wards, n = 266). The primary outcome was the half-year incidence of NSIs, which was measured through questionnaires and official notification at the occupational health service at baseline (T0), 6 months (T1) and 12 months (T2) after baseline. Analysis were done by intention to treat. This study is registered as a prospective randomized trial, number NTR1207.ResultsA statistically significant difference was found between the groups for the half-year incidence of NSIs (p = 0.046) on the basis of questionnaire data with ORs for reported NSIs for the NW group compared with the control group of 0.34 (95% CI: 0.13–0.91) and 0.45 (95% CI: 0.19–1.06) for the W group compared with the control group. The officially registered NSIs during the study period showed no statistical differences between the groups.ConclusionsThe combined intervention of the introduction of needle safety devices and an interactive workshop led to the highest reduction in the number of self-reported NSIs compared to a workshop alone or no intervention.