Di-(2-ethylhexyl)phthalate in sewage sludge and post-treated sludge: quantitative determination by HRGC-MS and mass spectral characterization

DEHP was quantified into sewage sludge, thermally dried sludge and compost samples from different areas of Catalonia (North East Spain) using high-resolution gas chromatography (HRGC) coupled to a mass spectrometry (MS). The aim of the work was to determine the evolution of this ubiquitous environmental contaminant along some post-treatment sludge processes, such as composting and thermally drying. DEHP concentration detected in some sludges are above the maximum limit suggested by the EC (100 ppm d.m.) for agricultural use. However, the composting and thermally drying reduce the amount of DEHP in sewage sludge to acceptable level for safe land application. The study was completed with the characterization and long-term observation of DEHP in sewage sludge, composted sludge and thermally dried sludge mixed with two types of soils. In all cases, the percentage of DEHP degraded was higher than 50% after 9 months of incubation.     

The fate of chlorobenzenes and permethrins during anaerobic sewage sludge digestion

Mixed primary sewage sludge was incubated anaerobically with and without azide addition to prevent biological activity. The behaviour of 1,3-, 1,4- and 1,2-dichlorobenzene, 1,3,5-, 1,2,4- and 1,2,3-trichlorobenzene, 1,2,3,4- and 1,2,4,5-tetrachlorobenzene, hexachlorobenzene, and cis- and trans-permethrin was examined to determine their potential removal during anaerobic digestion. All the chlorobenzenes were removed to varying extents over 32 days of incubation, ranging from 25% removal for 1,3,5-trichlorobenzene to 80% removal for 1,4-dichlorobenzene. Biodegradation may have been responsible for the reductions in 1,3- and 1,4-dichlorobenzene and 1,2,4- and 1,2,3-trichlorobenzene as there was no significant removal of these compounds in azide treated sludge. The removal over 32 days of cis- and transpermethrin was 87% and 96% respectively. These removals were attributed to a chemical or physical process.     

Changes of polycyclic aromatic hydrocarbons during composting of sewage sludges with chosen physico-chemical properties and PAHs content

The aim of the experiment was to determine changes in the PAH content during sewage sludge composting. The extent was evaluated to which sewage sludge properties influences on PAHs losses during composting. Five municipal sewage sludges were studied from sewage treatment plants located in the south-east of Poland, i.e. in Stalowa Wola, Kra?nik, Lublin, Zamo?? and Bi?goraj. The treatment plants selected were characterised by their differentiation with catchments area as well as the industrial character of the areas. Sludge composting was carried out in aerobic conditions in plastic containers for a period of 76 days. The content of 14 polycyclic aromatic hydrocarbons (PAHs) and some physical-chemical (TOC, Nt, TOC/Nt, CEC, BS, TEB, pH, available potassium and phosphorus, total forms of cations) sewage sludge properties were monitored. In the present study correlations between PAHs losses (during various phases of composting) and physical-chemical properties of sewage sludges and composts were also evaluated. The sewage sludges were characterised both by differentiated properties and by PAH content. The total PAH content (the sum of 14 PAHs from the EPA List with exception of naphthalene and acenaphthene) in the sludges ranged from 3674 to 11236 microg kg(-1). Four- and three-ring compounds were predominant in the sewage sludges. Almost all of the sludges were characterised by differentiated content levels of both individual PAHs groups and PAHs sum. After 76 days of composting, a significant lowering of the PAH content was observed in all sludges as compared to the beginning of the experiment. The range of total observed PAH losses was from 15.8% to 48.6%, depending on the sewage sludge. The largest lowering of the PAH content was observed in the sludge with the lowest concentration of the xenobiotics studied. The largest losses in individual PAHs were observed in the case of five- and six-rings compounds, and were probably related to strong pollutant binding by other components of the sewage sludge. The few significant relationships showed that PAH losses during composting were only slightly determined by the analysed physical-chemical properties.     

Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.     

Effects of lime amendment on availability of heavy metals and maturation in sewage sludge composting

A batch composting study was performed to evaluate the feasibility of co-composting sewage sludge with lime, aiming at reducing the availability of heavy metals in the sludge compost. Sewage sludge with sawdust as bulking agent was amended with lime at 0, 0.63, 1.0, and 1.63% w/w, and composted for 100 days in laboratory batch reactors. The changes in temperature, pH, electrical conductivity (EC), and extractable heavy metal contents were measured while compost maturity was determined by C/N(organic) and cress seed germination during the composting period. Liming raised pH of compost effectively at the initial stage of composting and caused a decrease in EC through precipitation of soluble ions. Lime amendment also significantly reduced water-soluble and Diethylene triamine pentracetic acid (DTPA)-extractable metal contents. The maximum reductions were 60 and 40% for Cu, 80 and 40% for Mn, 55 and 10% for Zn, and 20 and 25% for Ni at the end of the composting period for the lime-amended sludge as compared to the control. In spite of the inhibitory effect of lime amendment on the decomposition activity of sewage sludge, all treatments reached maturation after 63 days of composting as indicated by the results of C/N(organic) ratio and cress seed germination test results. A lime amendment of < or =1.0% is recommended to co-compost with sewage sludge.     

Bacterial leaching of metals from sewage sludge by indigenous iron-oxidizing bacteria

Bioleaching of metals can be achieved in sewage sludge using Thiobacillus ferrooxidans, which obtains its energy requirements from the oxidation of added ferrous iron. The purpose of this study was to verify the presence of indigenous T. ferroxidans and to evaluate their adaptive capacity and leaching potential. Nineteen sludges (primary, secondary, aerobically and anaerobically digested, oxidation pond) were tested and all of them contained indigenous iron-oxidizing bacteria. The acclimation of these organisms by successive transfers allowed a rise of sludge redox potential over 450 mV and a decrease of sludge pH between 3.8 and 2.2 over a 10-day incubation period. The metal solubilization efficiencies were Cd: 55-98%, Cr: 0-32%, Cu: 39-94%, Mn: 71-98%, Ni: 37-98%, Pb: 0-31% and Zn: 66-98%, were reached with these indigenous strains. The results obtained show that the metal bioleaching may be easily realized by direct acclimation of sludge microflora.     

Changes in sewage sludge carbon forms along a treatment stream

The behaviour and fate of macronutrients and pollutants in sewage sludge applied to the land are affected by the chemical composition of the sludge organic matter, which in turn is influenced by both sewage source and by sewage treatment processes. In this study, (13)C nuclear magnetic resonance (NMR) spectroscopy was used to characterise the organic matter of sludges collected at three different points along the treatment stream of a municipal sewage works with a domestic catchment. Sludge at the first point, an undigested liquid (UL) sludge, had a substantially different composition to the anaerobically digested (AD) and dewatered sludge cake (DC) materials, which were similar to each other. In particular, the UL sludge contained more alkyl C than the AD or DC sludges. All three sludges were found to contain mobile alkyl C that is poorly observed using the cross polarisation (CP) technique, necessitating the use of the less sensitive, but more quantitatively reliable direct polarisation (DP) technique to obtain accurate distributions of C types.     

Fate of sex hormones in two pilot-scale municipal wastewater treatment plants: conventional treatment

The fate of seven sex hormones (estrone (E1), estradiol (E2), estriol (E3), ethinylestradiol (EE2), testosterone, androstenedione, and progesterone) was determined in two pilot-scale wastewater treatment plants operated under conventional loading conditions. The levels of hormones in both the liquid and the solid matrixes of the plants were determined. Each of the two 20-l/h pilot-scale plants consisted of a primary clarifier followed by a three-stage aeration tank and a final clarifier. The primary sludge and the waste activated sludge (WAS) were digested anaerobically in one pilot plant and aerobically in the other. The pilot plants were fed a complex synthetic wastewater spiked with the hormones. Levels of testosterone, androstenedione and progesterone were close to method detection limit (MDL) concentrations in the final and digester effluents (both liquid and solid phases) and were considered as completely removed. Average mass flux removals from the liquid streams (plant influent minus secondary clarifier effluent) for the natural estrogens were 82% for E1, 99% for E2, and 89% for (E1+E2). An average overall removal of only 42% was achieved for EE2. These values reflect removals averaged for the two pilot plants.     

Effect of ultrasonication and Fenton oxidation on biodegradation of bis(2-ethylhexyl) phthalate (DEHP) in wastewater sludge

The presence of bis(2-ethylhexyl) phthalate (DEHP) and its metabolites, i.e. 2-ethylhexanol, 2-ethylhexanal, and 2-ethylhexanoic acid in wastewater sludge (WWS) were investigated during aerobic digestion and Bacillus thuringiensis (Bt)-based fermentation of WWS. Ultrasonication and Fenton oxidation pre-treatment was applied to improve biodegradability of WWS and bioavailability of the target compounds for digestion and fermentation. DEHP and 2-ethylhexanoic acid were observed at higher concentration, meanwhile 2-ethylhexanol and 2-ethylhexanal were observed at lower concentration in WWS. After 20-day aerobic digestion, DEHP removal was 72%, 89%, and 85%, and 2-ethylhexanoic acid removal was 71%, 84%, 79%, respectively for raw, ultrasonicated, and Fenton-oxidized sludges. Bt was found to degrade DEHP, leading to DEHP removal of 21%, 40%, and 30%, respectively for raw, ultrasonicated, and Fenton-oxidized sludges in the fermentation. The results suggested that aerobic stabilization and Bt-based fermentation can remove the phthalates, and pre-treatment of WWS was also effective in improvement of DEHP biodegradation. Hence, Bt-based biopesticide production from WWS can be applied safely when taking into consideration the phthalate contaminants.     

Effect of solids concentration on bacterial leaching of heavy metals from sewage sludge

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe2+ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Temporal evolution of polycyclic aromatic hydrocarbons (PAHs) in sludge from wastewater treatment plants: comparison between PAHs and heavy metals

This paper presents results on the presence and temporal variability of the 16 PAHs recommended by the EPA in primary, secondary and digested sewage sludge over a year. The sewage sludges originated from the Guadalete wastewater treatment plant (WWTP) site in Jerez de la Frontera (Cádiz, Spain). These organic pollutants have been extracted from the sewage sludge by microwave energy. High performance liquid chromatography coupled with diode array (HPLC-DAD) or fluorescence (HPLC-FL) detectors have been used. The results showed that total PAHs concentration varied between 1,945 ng g(-1) dry matter (DM) for primary sludges collected in March and 10,100 ng g(-1) DM for primary sludge collected in June. Generally, concentrations of PAHs were higher in compost and digested sludge than in fresh one. On the other hand, the highest concentration of PAHs were found on summer. This thing is associated to the traffic increase from inland zones to the coast (Jerez de la Frontera is very near to beaches). Finally, this paper present a comparative study of the American an European legislation concluding that the limits of concentrations established are not exceeded. In addition heavy metals were analysed. The origin of PAHs and heavy metals seems to be different.     

调理剂对堆肥产品重金属生物有效性的影响

城市污泥中重金属含量及其生物有效性是限制污泥农用的主要因素,因此,研究污泥堆肥化处理过程中重金属生物有效性,对污泥的农用具有重要意义。实验以城市污泥为原料,以菌菇渣和秸秆为调理剂,设置4个处理:A(污泥∶菌菇渣∶秸秆=1∶0.4∶0.025)、B(污泥∶菌菇渣∶秸秆=1∶0.3∶0.025)、C(污泥∶秸秆=1∶0.12)和D(污泥∶秸秆=1∶0.09),进行好氧堆肥实验,采用BCR顺序提取法测定各种形态的重金属,研究堆肥前后重金属形态的变化规律。结果表明,城市污泥中Cu、Ni、Pb和Cr主要以可氧化态及残渣态存在,生物有效性较低,而Zn和Cd主要以酸溶态和可还原态存在,生物有效性较高;堆肥过程显著降低了Cu、Zn、Ni和Pb的生物有效性,并改变了Cu、Zn、Ni、Pb、Cr和Cd的形态分布,使污泥中的Cu、Zn、Ni、Pb和Cd向着更稳定的可氧化态或残渣态转变;污泥经过堆肥处理后,Cu、Zn和Ni 3种重金属生物有效性关系为:ABCD,与其他处理相比,处理A残渣态的Pb和Cr增加比例较多,综合来看,处理A对重金属生物有效性的降低最为明显,重金属钝化效果最佳。     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Examination of environmental quality of raw and composting de-inking paper sludge

Paper sludges were traditionally landfilled or burned. Over the years, the use of paper sludges on soils has increased, as well as the concerns about their environmental effects. Therefore, the chemical characterization of paper sludges and their young (immature) compost needed to be investigated, and over 150 inorganic and organic chemicals were analyzed in de-inking paper sludge (DPS). In general, nitrogen, phosphorus and potassium contents were low but variable in raw DPS and its young compost. The contents of arsenic, boron, cadmium, cobalt, chromium, manganese, mercury, molybdenum, nickel, lead, selenium, and zinc were also low and showed low variability. However, the copper contents were above the Canadian compost regulation for unrestricted use and required a follow-up. The fatty- and resin acids, and polycyclic aromatic hydrocarbons were the organic chemicals measured at the highest concentrations. For resinic acids, care should be taken to avoid that leachates reach aquatic life. For polycyclic aromatic hydrocarbons, naphthalene should be followed until soil content reaches 0.1 microg g(-1), the maximum allowed for soil use for agricultural purposes according to Canadian Environmental Quality Guidelines. In young compost, the concentration of these chemical families decreased over time and most compounds were below the detection limits after 24 weeks of composting. In raw DPS, among the phenol, halogenated and monoaromatic hydrocarbons, dioxin and furan, and polychlorinated biphenyl families, most compounds were below the detection limits. The raw DPS and its young compost do not represent a major threat for the environment but can require an environmental follow-up.     

A comparative study of anaerobically digested and undigested sewage sludges in preparation of activated carbons.

Disposal of sewage sludge is an increasingly expensive and environmentally sensitive problem throughout the world. Preparation of activated carbon from sewage sludge offers an attractive re-use alternative to the traditional disposal routes. The objective of this research work was to compare anaerobically digested sewage sludge (DS) and undigested sewage sludge (US) as source materials in the preparation of activated carbons. Prior to the preparation the properties of the two types of sewage sludges were determined and compared. Subsequently the sludge samples were activated with 5 M ZnCl2 solution and thereafter pyrolysed at heating temperature of 650 degrees C for 2 h with the heating rate of 15 degrees C/min under a nitrogen atmosphere. The produced activated carbons were characterised by surface area and porosity analysis, CHN elemental composition and ash contents determination, and aqueous phase phenol adsorption tests. The results indicate that in comparison with the DS, the US had a higher carbon content and lower ash content, and accordingly yielded a better activated carbon with a higher BET surface area, pore volume, carbon content and phenol adsorption capacity.     

Removal of heavy metals from anaerobically digested sewage sludge by isolated indigenous iron-oxidizing bacteria

The removal of heavy metals (Cr, Cu, Zn, Ni and Pb) from anaerobically digested sludge from the Yuen Long wastewater treatment plant, Hong Kong, has been studied in a batch system using isolated indigenous iron-oxidizing bacteria. The inoculation of indigenous iron-oxidizing bacteria and the addition of FeSO4 accelerated the solubilization of Cr, Cu, Zn, Ni and Pb from the sludge. pH of the sludge decreased with an increase in Fe2+ concentrations and reached a low pH of 2-2.5 for treatments receiving both bacterial inoculation and FeSO4. After 16 days of bioleaching, the following heavy metal removal efficiencies were obtained: Cr 55.3%, Cu 91.5%, Zn 83.3%, Ni 54.4%, and Pb 16.2%. In contrast, only 2.6% of Cr, 42.9% of Cu, 72.1% of Zn, 22.8% of Ni and 0.56% of Pb were extracted from the control without the bacterial inoculation and addition of FeSO4. The residual heavy metal content in the leached sludge was acceptable for unrestricted use for agriculture. The experimental results confirmed the effectiveness of using the isolated iron-oxidizing bacteria for the removal of heavy metals from sewage sludge.     

城市污水处理厂污泥作为矿山废弃地复垦土壤基质的可行性分析

以具有代表性的、运行技术成熟的污水处理厂的污泥为对象,对污水处理厂处理后的污泥进行好氧发酵堆肥,并对堆肥过程中的主要参数进行控制,对城市污水处理厂污泥作为矿山废弃地复垦土壤基质进行了可行性分析。     

Sequential extraction of heavy metals during composting of sewage sludge

The major limitation of soil application of sewage sludge compost is the total heavy metal contents and their bioavailability to the soil-plant system. This study was conducted to determine the heavy metal speciation and the influence of changing the physico-chemical properties of the medium in the course of composting on the concentrations, bioavailability or chemical forms of Cu, Zn, Pb and Ni in sewage sludge. Principal physical and chemical properties and FTIR spectroscopical characterization of sludge compost during treatment show the stability and maturity of end product. The total metal contents in the final compost were much lower than the limit values of composts to be used as good soil fertilizer. Furthermore, it was observed by using a sequential extraction procedure in sludge compost at different steps of treatment, that a large proportion of the heavy metals were associated to the residual fraction (70-80%) and more resistant fractions to extraction X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of metals bound to bioavailable fractions X-(KNO3+H2O). Heavy metal distribution and bioavailability show some changes during composting depending on the metal itself and the physico-chemical properties of the medium. Bioavailable fractions of all elements tend to decrease except Ni-H2O. Zn and mainly Cu present more affinity to organic and carbonate fractions. In contrast, Pb is usually preferentially bound to sulfide forms X-HNO3. Nickel shows a significant decrease of organic form. Significant degrees of correlation were found between heavy metal fractions and changes of some selected variables (e.g. pH, ash, organic matter, humic substance) during the course of composting. Mobile fractions of metals are poorly predictable from the total content. The R2 value was significantly increased by the inclusion of other variables such as the amount of organic matter (OM) and pH.     

造纸白泥和粉煤灰的添加对污泥消化液中氮磷回收的影响

污泥厌氧消化液中含有丰富的氮磷,若直接排放到环境中,将会对附近水体造成严重污染。由于消化液中Mg^2＋和Ca^2＋的含量很低,严重影响了氮磷的回收效果。把造纸白泥和粉煤灰引入到污泥厌氧消化液氮磷的回收当中,可以明显地提升消化液pH和提高PO4^3-P和NH3-N回收率。实验结果表明：当造纸白泥添加量为4g／（L·h）时,曝气12h后,pH可达10．19,此时PO4^3-P和NH3-N回收率分别达到64％和45％;而当粉煤灰添加量为4g／（L·h）时,曝气12h后,pH达到9．63,PO4^3-P和NH3-N回收率分别为46％和41％。但仅用曝气方式处理,12h后,pH值仅为8．52,PO4^3-P和NH3-N回收率分别只有20％和18％。实验结果还表明,水力停留时间（HRT）越大,pH上升速度越快,幅度越大,氮磷的回收效果就越好。     

Impact of drying and composting procedures on the concentrations of 4-nonylphenols, di-(2-ethylhexyl)phthalate and polychlorinated biphenyls in anaerobically digested sewage sludge

Enhanced treatments of sewage sludge produce a more manageable product for agricultural use by stabilizing the material, removing water, and reducing the possibility of pathogen transfer. We investigated the impact of pilot-scale composting and drying of sludge on physicochemical characteristics and on the concentrations of some organic contaminants. During the 143 day composting procedure, organic matter fell 22% and moisture by half. Concentrations of 4-nonylphenols (4-NPs) fell by 88% and di-(2-ethylhexyl) phthalate (DEHP) by 60%; losses continued throughout the procedure. Losses of total polychlorinated biphenyls (PCBs) were 11%, mostly from the lower molecular weight congeners, suggesting volatilization as the most likely loss mechanism. The drying process was much shorter, 40 days, yet organic matter content decreased by 27% and moisture by 85%. Losses of 4-NPs (39%) and DEHP (22%) were less than in composting and stopped when moisture content became constant. There were no losses of PCBs. Both treatments are simple, practical procedures that reduce the volume of waste and are applicable in situ on farms. Composting would be the method of choice for reducing organic contaminants but requires much longer times than drying.