Microclimate monitoring of indoor environments using piezoelectric quartz crystal humidity sensors

The aim of this paper is to describe indoor microclimate monitoring at two different locations, Sandham Memorial Chapel, in Hampshire, England, and the castle El Alcázar, in Segovia, Spain. Piezoelectric quartz crystal sensors with novel humidity sensitive poly(ethyleneimine) coatings and Pt resistance thermometers were used to measure the relative humidity (RH) and temperature gradients across one of the paintings of the British artist, Stanley Spencer, housed in Sandham Memorial Chapel. The measurement period extended from December 1997 to September 1998. Each coated crystal was set in its own housing from which temperature and RH measuring circuits were connected via a cable to the computer. The 9 month monitoring period incorporated the range in seasons from winter through to autumn. Between December and February the RH at the back of the painting was found to be lower than that at the front. In March and April the reverse was true. Additionally, there were large spikes in the data in some of the months for both RH and temperature, probably caused by direct sunlight falling on the sensors. At the second site monitoring was performed for a shorter period, from December 1997 to early January 1998. It served, however, to show that abrupt changes can occur in the microclimate surrounding the painting. These fluctuations can with time lead to alterations to the paint surface and result eventually in cracking and damage to the art work.     

A yeast-based cytotoxicity and genotoxicity assay for environmental monitoring using novel portable instrumentation

An assay capable of simultaneously measuring both general toxicity and more subtle genotoxicity, in aqueous environmental samples, is described. The assay uses eukaryotic (yeast) cells, genetically modified to express a green fluorescent protein (GFP) whenever DNA damage, as a result of exposure to genotoxic agents, is repaired. A measure of the reduction in cell proliferation is used to characterise general toxicity producing familiar EC(50) and LOEC data. The assay protocol has been developed for proposed use in the field and hence employs dedicated, portable instrumentation, the development of which is described. A range of environmentally relevant substances has been evaluated using the assay, including solutions of metal ions, solvents and pesticides. Preliminary data comparing the yeast assay's response to that of a standard Daphnia test in the analysis of the toxicity of 34 varied industrial waste effluents are also presented. The sensitivity to a wide range of substances and effluents suggests the assay should be useful for environmental toxicity monitoring.     

Description and evaluation of a sampling system for monitoring hydrocarbons in sediments

A composite random sampling design was used to estimate the concentrations of hydrocarbons in sediments from two near-shore areas of Scotland (Firth of Clyde and Firth of Forth). The aim of this work was to estimate a mean value for each parameter in these areas, and to determine whether this can be done with more thorough coverage (better representation), better precision and less variance at lower analytical cost through a composite random sampling scheme rather than a simple random sampling scheme, and thereby contribute to the re-design of the UK National Marine Monitoring Programme (NMMP), re-named the UK Clean Seas Environmental Monitoring Programme (CSEMP) in 2006. Samples were collected using a simple random sampling design during 2005. All sediment samples were analysed for their particle size distribution and total organic carbon (TOC). All sediments were analysed for polycyclic aromatic hydrocarbons (PAHs) and n-alkanes. The concentrations of PAHs and n-alkanes in the study areas are described, and sources of PAHs were investigated through the PAH distributions and n-alkane profiles. Individual sediment samples from each area were combined to give a series of composite sub-samples, each comprised of 5 individual sediment samples. These composite samples were re-analysed for the same parameters as the individual samples. Mean total PAH (2- to 6-ring parent and branched) concentrations, based on the individual original sediment samples collected through simple random sampling, were 1858 microg kg(-1) dry weight (SE = 196 microg kg(-1) dry weight, n = 25) and 532.4 microg kg(-1) dry weight (SE = 59 microg kg(-1) dry weight, n = 25) in the Clyde and Forth, respectively. Mean total PAH concentrations of the composite samples were 1745 microg kg(-1) dry weight (SE = 121.0 microg kg(-1) dry weight, n = 5) in the Clyde and 511.6 microg kg(-1) dry weight (SE = 37.4 microg kg(-1) dry weight, n = 5) in the Forth. No significant differences were found between the mean PAH concentrations from the two sampling designs. This study demonstrated that the composite random sampling design gave a mean value with less variance than the simple random sampling design, at significantly reduced analytical effort (and cost).     

A novel sensor for monitoring leakage of petroleum and other liquid hydrocarbons into soil environments

This paper describes the use of a potentially implantable infrared reflectometer for the qualitative detection of petroleum and a number of other hydrocarbon solvents. A rugged, low-power, re-useable sensor was evaluated in the laboratory for its ability to detect petrol in soil. A hydrophobic fluoropolymer was used as the sensing surface due to its high selectivity for petroleum hydrocarbons. The photocurrent reflected by this surface from a near IR source was measured to test for petroleum saturation within the membrane, which in turn was an indicator of petroleum in the surrounding soil. The simplicity in the sensor design enabled a stable, low cost detection method for petroleum and other hydrocarbons, ideal for use in sub-surface applications.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Characterization of dissolved organic carbon at low levels in environmental waters by microfluidic-chip-based capillary gel electrophoresis with a laser-induced fluorescence detector

A microfluidic analytical system for characterization of dissolved organic carbon (DOC) in environmental waters, based on a capillary gel electrophoresis (CGE) device with a laser-induced fluorescence (LEF) detector, was developed. The applied voltage and the running buffer were investigated to control the simple floating injection and CGE separation for convenient cross-type microchips made from polymethylmethacylate. We obtained reproducible peaks for standard organic solutions and the determination time is less than 70 s. The values of the relative standard deviation (RSD) were 0.17–2.01% for repetitive injection (n?=?12). We demonstrated high-throughput characterization of DOC in environmental water from the Biwa Lake and the Hino River using microfluidic chip and determined that the content of DOC in the Biwa Lake changed with the seasons.     

河北省环境自动监测网络支持系统的研究与应用

河北省环境自动监测网络支持系统综合应用GPRS/GSM无线传输技术、VSAT卫星通信网络、网络数据库、WEBGIS等信息技术,在省一级环保网络构架上以较高的性价比给出了系统的、完备的环境自动监测数据传输、处理的解决方案.     

Application of an environmental impact assessment methodology to a site discharging low levels of radioactivity to a freshwater environment in Norway

Significant shifts in opinion regarding environmental protection from ionising radiation have resulted in the development and availability of bespoke approaches for the assessment of impacts on wildlife from radioactive contaminants. The application of such assessment methodologies to actual situations, however, remains relatively limited. This paper describes the implementation of the ERICA Integrated Approach and associated tools within the context of routine discharges of radioactive materials to a freshwater environment. The article follows the implementation through its relevant stages and discusses strengths and weaknesses of the approach in relation to the case study. For current discharge levels, ¹³⁷Cs and ⁶⁰Co constitute the main dose contributors to the majority of reference organisms studied, although ²⁴¹Am and ³H are the main contributors for the phyto- and zooplankton categories. Patterns are observed depending on whether the reference organism is sediment-associated or not. At current discharge levels, none of the reference organisms exceeded or approached the selected screening level, and impacts on biota could be regarded as negligible.     

Determination of organochlorinated compounds and petroleum hydrocarbons in sediment sample IAEA-408. Results from a world-wide intercalibration exercise

A sediment sample from the intertidal mudflats of the Tagus estuary was prepared, homogenised and distributed globally to laboratories as the IAEA-408 intercomparison material for the analyses of organochlorinated pesticides, PCBs and petroleum hydrocarbons (PHs). A total of 48 laboratories from 36 countries reported their results. The data from participants show that there still remain some difficulties with the accurate determination of organic contaminants such as pesticides and polycyclic aromatic hydrocarbons (PAHs). More consistent interlaboratory results were obtained for PCBs congeners. The final results of this intercomparison exercise enable individual participants to assess their performance and, where necessary, to introduce appropriate modifications in their analytical procedures. Furthermore, as a series of statistical criteria was fulfilled for a number of compounds, the sample IAEA-408 can now be used as a reference material for quality control in the determination of some persistant organic pollutants (POPs) in marine sediment samples.     

Research on deep integration of application of artificial intelligence in environmental monitoring system and real economy

Environmental monitoring, modeling, and managing allow a better understanding of major processing and techniques for managing environmental changes. The pollution level has risen over time due to many factors such as a rise in population and the use of the vehicle, industrialization, and urbanization that have a direct impact on people ‘s health. Hence, in this paper, Artificial intelligence assisted Semantic Internet of Things (AI-SIoT) has been proposed using a wireless sensor network (WSN) for the environmental monitoring system and the real economy. The Artificial Intelligence technique can very effectively analyze data and make precise decisions on the provision of services in different types. This study provides a mathematical framework for the analysis of interdependent aspects of the WSN protocol for communication and design of signal processing. The Internet of Things (IoT) based framework comprises the complete information system from the sensor level to data management about the environment. The experimental results show that the proposed method provides an effective way to analyze the long-term monitoring of environmental data. The proposed AI-SIoT method using the WSN method enhances accuracy(95.6%), performance(98.7%) increase efficiency (93.7%) with reliability (97.4%) when compared to other existing methods.     

太湖污染与环境动态监测信息系统研究

太湖流域是我国人口和城镇最为密集的经济发达地区 ,同时也是我国富营养化和生态破坏严重的大湖流域之一。文章以太湖为研究区 ,围绕湖区存在的主要环境问题 ,应用遥感和 GIS一体化的方法 ,提出了建立太湖环境动态监测信息系统的紧迫性 ,重点论述了系统的技术框架、功能、数据库组成 ,同时也强调了系统建设中应重视的问题     

Distribution and health-risk of polycyclic aromatic hydrocarbons in soils at a coking plant

Nineteen soil samples were collected in and around Songshan coking plant in Guangdong province of China and analyzed for eighteen polycyclic aromatic hydrocarbons (PAHs) by gas chromatography-mass spectrometry (GC-MS). The total concentration of PAHs ranged from 2.36 to 1146.39 mg kg(-1) dry weight, varying significantly among the sampling sites, most individual PAHs were correlated with each other. A cluster analysis was performed to examine the correlation of PAH distribution, five groups were observed with sample types in the coking plant. 2-3 ring PAHs were predominant in group I and II, while 4-5 ring PAHs showed great abundance in group III, IV and V, which contributed to the distance from the emission sources in the coking plant and the behaviors of particle-bound and gaseous PAHs. The ratios of Flu?:?(Flu + Pyr), BaA?:?(BaA + Chr), InP?:?(InP + BgP) and Ant?:?(Ant + Phen) ratios were 0.51-0.87, 0.16-0.89, 0.47-0.68 and 0.03-0.60, respectively. The total index of all studied soils was > 6, indicating that the source of the PAHs in coking plant soils were from the pyrolysis processes. Health risk assessments were carried out by dermal PAH exposure data to quantify cancer risk. The resultant lifetime exposure levels due to TEQ(BaP) desorbed onto skin for workers ranged from 2.25 × 10(-7) to 7.86 × 10(-5) mg kg(-1) per day, and the estimated cancer risks were between 8.45 × 10(-6) and 2.94 × 10(-3), indicating that the dermal exposures of PAHs to coking workers might be acceptable in most soil sites.     

试论环境监测分析中的具体问题具体分析

讨论了环境监测分析中有关量筒、移液管、容量瓶、滴定管、托盘天平、比色皿等仪器的简化操作方法 ,这对于分析人员提高分析速度和分析准确度具有很强的实用性     

Development of an efficient and sensitive analytical method for the determination of copper at trace levels by slotted quartz tube atomic absorption spectrometry after vortex-assisted dispersive liquid-liquid microextraction in biota and water samples using a novel ligand

This study describes the determination of trace levels of copper by slotted quartz tube atomic absorption spectrometry after dispersive liquid-liquid microextraction. A ligand synthesized from the reaction of salicylaldehyde and 1-naphthylamine was used to form coordinate copper complex prior to extraction. All parameters that influence the output of complex formation, extraction, and instrumental measurement were optimized to enhance the absorbance signal of copper. Under the optimum conditions, about 104-fold enhancement in sensitivity was recorded over the conventional flame atomic absorption spectrometer, corresponding to a 0.51 ng/mL detection limit. The percent relative standard deviation calculated for the lowest concentration (4.8%) indicated high precision for the experimental procedure. Accuracy and applicability of the optimum method were determined by performing spiked recovery tests on urine, lake water, and mineral water samples. Satisfactory recovery results were obtained between 82.2 and 106.3% at four different concentrations. Matrix matching method was also performed to increase the accuracy of quantification, and the percent recovery calculated for 175 ng/mL was 105.14%.     

Mobile monitoring along a street canyon and stationary forest air monitoring of formaldehyde by means of a micro-gas analysis system

A micro-gas analysis system (μGAS) was developed for mobile monitoring and continuous measurements of atmospheric HCHO. HCHO gas was trapped into an absorbing/reaction solution continuously using a microchannel scrubber in which the microchannels were patterned in a honeycomb structure to form a wide absorbing area with a thin absorbing solution layer. Fluorescence was monitored after reaction of the collected HCHO with 2,4-pentanedione (PD) in the presence of acetic acid/ammonium acetate. The system was portable, battery-driven, highly sensitive (limit of detection = 0.01 ppbv) and had good time resolution (response time 50 s). The results revealed that the PD chemistry was subject to interference from O(3). The mechanism of this interference was investigated and the problem was addressed by incorporating a wet denuder. Mobile monitoring was performed along traffic roads, and elevated HCHO levels in a street canyon were evident upon mapping of the obtained data. The system was also applied to stationary monitoring in a forest in which HCHO formed naturally via reaction of biogenic compounds with oxidants. Concentrations of a few ppbv-HCHO and several-tens of ppbv of O(3) were then simultaneously monitored with the μGAS in forest air monitoring campaigns. The obtained 1 h average data were compared with those obtained by 1 h impinger collection and offsite GC-MS analysis after derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBOA). From the obtained data in the forest, daily variations of chemical HCHO production and loss are discussed.     

Cu、Pb、Zn火焰原子吸收多谱线分析在环境监测中的应用

对铜的 3条谱线 (2 49.2 nm、2 61 .4nm,3 2 4.8nm ) ,铅的 2条谱线 (2 83 .3 nm、2 1 7.0 1 nm )以及锌的 2条谱线(3 0 7.6nm、2 1 3 .9nm ) ,共 7条谱线的灵敏度、检测限、线性范围进行了归纳性总结 ,并对多种共存元素可能存在的干扰情况进行了研究 ,认为利用元素不同分析谱线的分析灵敏度差异 ,根据被测元素在样品消解液中含量 ,选择合适的谱线进行分析 ,既降低工作强度 ,又能获得满意结果     

Use of feathers of feral pigeons (Columba livia) as a technique for metal quantification and environmental monitoring

This study quantifies metal concentrations in washed and unwashed feathers of feral pigeons (Columba livia). The material was collected in two different sites: Goiania (capital of Goiás State), with high anthropic activities, and Jataí (a city in Goiás), with low anthropic activities. Results revealed that metals such as Pb, Cr, and Cd were deposited in the feathers originating from air and soil (exogenous process). Other metals such as Cu, Fe, Mn, and Zn, which are part of the tissue constitution of a living being, were absorbed through the pigeons' diet (endogenous process). There was a statistically significant difference between mean values of Cd, Pb, and Cr in the three collection sites. The order of metal concentrations were Civic Square > Zoo > Jataí, which shows highest levels of metal contamination in anthropic environments. Significant differences between Cd, Pb, and Cr in washed and unwashed feathers suggest that metal concentrations are directly related to exposure time due to exogenous sources. We concluded that it is possible to quantify and monitor metal levels in the environment by analyzing the feathers of urban feral pigeons. Furthermore, unwashed feathers were especially efficient to investigate endogenous and exogenous absorption of the metals in our study.     

Real-time monitoring of water quality using fish and crayfish as bio-indicators: a review

Water quality monitoring using fish and crayfish as bio-indicators requires an understanding of the state of pollution of waters, choice of bio-indicators, physiological and behavioral endpoints of fish and crayfish, and principles of the methodology and their potential applications. Here, we discuss telemetry, acoustic monitoring, vision-based monitoring, measures of ventilatory activity, electrocardiography, and fiber-optic plethysmography. Assessment of water quality must be based, not only on physicochemical characteristics of the current environment as determined by chemical analyses, but also on observations of the physiology and behavior of its inhabitants. Real-time biomonitoring is suggested as the most reliable method, since it incorporates living organisms into the system to serve as biosensors. The potential application of the methods discussed includes use at water treatment plants and water supply stations for prevention of hazardous toxicological events, and, for aquaculture, in ponds, lakes, and aquariums for monitoring growth, population size, and behavior traits.