臭氧氧化对二级出水有机物(EfOM)特性机制的影响

开展了臭氧氧化对二级出水有机物(effluent organic matter,Ef OM)的去除效能研究,并进一步采用超滤分离、三维荧光光谱等方法,系统研究了不同臭氧投加量下,Ef OM的分子量分布、亲疏水特性以及荧光特性的变化规律。结果表明,臭氧化去除Ef OM的效果有限,但能够有效分解二级出水中具有强烈紫外吸收的有机物。此外,臭氧能优先氧化分解二级出水中大分子有机物,有效提高二级出水的可生化性。臭氧氧化过程中,分子质量(molecular weight,MW)100 k Da的有机物组分被完全氧化分解,10 k DaMW100 k Da和1 k DaMW10 k D的有机物组分含量总体呈下降趋势,而MW1k Da的有机物组分随臭氧投加时间的延长含量不断上升。臭氧化后,Ef OM中疏水组分减少,亲水组分升高;酸性组分减少。随着臭氧投量的增加,蛋白质与腐殖酸类物质的荧光吸收强度迅速下降。     

印染废水生化出水中各类有机物在小型活性炭床吸附过程中的去除效果

采用连续流活性炭炭床处理印染废水生化出水,通过XAD-8/XAD-4吸附树脂将印染废水生化出水中的溶解性有机物分为4类:疏水酸、非酸疏水物质、弱疏水物质和亲水物质,采用超滤膜法测定水样的分子量分布,对印染废水生化出水中不同种类以及不同分子量大小的有机物在煤质炭、椰壳炭2种活性炭动态实验处理过程中的去除特性进行研究。实验结果表明,2种活性炭对该水样中的有机物均有明显的去除效果,其中以煤质炭的处理效果较优。煤质炭吸附疏水性和亲水性有机物均有明显的处理效果,对非酸疏水物质和弱疏水有机物的吸附效果较差。煤质炭对分子量<10 k的小分子有机物的吸附效果对实验结果的贡献较大。     

印染废水生化出水中各类有机物在Fenton 氧化过程中的去除效果

考察了Fenton氧化法处理印染废水生化出水时,不同因素对色度去除效果的影响。在最佳处理条件下,即[H2O2]∶[Fe2＋]为6∶1,反应初始pH为4.0,H2O2和FeSO4的投加量分别为3.6 mmol/L和0.6 mmol/L,反应时间为30min,UV254、DOC和COD的去除率分别达到了84%、52%和84%,ADMI7.6和稀释倍数表征的色度去除率分别达到了94%和96%。通过XAD-8/XAD-4吸附树脂联用技术将印染废水生化出水中溶解性有机物分为疏水酸、非酸疏水物质、弱疏水物质及亲水物质4类有机物。实验结果表明,对于该印染废水的生化出水,疏水性物质是引起色度的主要物质,所占比例以ADMI7.6表征时为92%,其中以非酸疏水物质的贡献最大,达到53%。Fenton试剂氧化处理对此水样中的非酸疏水物质和疏水酸均有较好的去除效果,对弱疏水性有机物和亲水性有机物去除率较低。     

再生水臭氧氧化处理工艺对水质生物稳定性的影响

为了保障再生水水质生物稳定性,控制再生水在储存、输配和利用过程中微生物生长,对再生水臭氧氧化处理工艺水质生物稳定性进行了研究。研究发现,臭氧氧化对再生水厂二级出水的溶解性有机碳(DOC)去除效果有限,对UV254和荧光强度有较好的去除效果,但可导致水样AOC水平升高,水质生物稳定性降低。分析臭氧氧化后不同有机物组分的变化情况,发现臭氧氧化对分子量为0.5~20 k Da有机物有较好的去除效果,而分子量小于0.5 k Da有机物没有明显变化。     

臭氧强化BAF工艺处理微污染窖水

采用臭氧-BAF组合工艺处理西北地区微污染窖水,使用比紫外吸收值(SUVA)、有机物分子量分布和三维荧光光谱等指标分析了臭氧预氧化对微污染窖水有机物特性的影响,研究了组合工艺对不同污染物的去除效果。结果表明:原水经臭氧预氧化后类腐殖质、类色氨酸物质含量分别下降65%、18%;水中小分子有机物含量增加,进水可生化性提高;经臭氧预氧化后BAF反应器出水类色氨酸物质含量低于未经臭氧预氧化的BAF反应器出水,臭氧预氧化起到了强化后续生物处理的作用。反应器出水CODMn、NH_3-N浓度分别为2.97 mg·L~(-1)、0.12 mg·L~(-1),满足生活饮用水卫生标准的要求;TOC、UV254和TN去除率分别为55%、53%和45%,水中污染物质得到有效去除。     

焦化废水臭氧催化氧化过程的污染物降解特征

为了考察焦化废水臭氧催化氧化深度处理过程中污染物的降解特征,对处理过程中的废水进行了COD、TOC、BOD、紫外可见光谱、高效液相色谱、气相色谱-质谱联用(GC-MS)和凝胶色谱等多种分析。结果表明:经臭氧催化氧化处理后,废水的COD、TOC和UV_(254)均降低,降低速度大小为UV_(254)CODTOC;臭氧催化氧化可提高废水的可生化性,但氧化时间进一步延长,可生化性反而降低;液相色谱表明非极性物质优先得到去除;凝胶色谱表明分子量较小的物质优先去除;GC-MS结果表明焦化废水混凝出水中主要成分为苯酚类、杂环化合物、多环芳烃及其衍生物,臭氧催化氧化处理后这些化合物都得到有效降解。     

铁盐和铝盐混凝对印染废水生化出水中溶解性有机污染物的去除特性

以三氯化铁和硫酸铝为混凝剂,印染废水二级生化出水为研究对象,并利用XAD-8/XAD-4吸附树脂联用技术将印染废水生化出水中溶解性有机物分为疏水酸、非酸疏水物质、弱疏水物质及亲水物质4类有机物,通过小试实验探讨了2种混凝剂对生化出水中各类溶解性有机物的去除效果及特点。实验结果表明,对于该印染废水的生化出水,溶解性有机物的主要成分是疏水性物质,以DOC表征时占总DOC的75%,其中疏水酸约占41%,疏水性物质也是引起色度的主要物质,所占比例以ADMI7.6表征时为89%,其中以非酸疏水物质的贡献最大,达到52%,并且非酸疏水物质中不饱和双键或芳香环有机物的含量较高。在三氯化铁和硫酸铝各自最佳的混凝条件下,均能够有效去除由疏水性物质（疏水酸和非酸疏水物质）引起的色度,但三氯化铁对弱疏水性物质以及亲水物质的去除率高于硫酸铝,这使得三氯化铁对印染废水生化出水中的溶解性有机物的去除效果优于硫酸铝。并且三氯化铁和硫酸铝混凝工艺均能明显降低生化出水的毒性。     

造纸中段废水的混凝-臭氧氧化深度处理研究

就混凝-臭氧氧化组合工艺对造纸中段废水生物处理出水的净化效果进行了研究.结果表明,Ca(OH)2对废水色度、TOC、COD和254 nm的紫外吸收值(UV254)的去除效果均优于聚合氯化铝/聚丙烯酰胺(PAC/PAM);Ca(OH)2-O3组合工艺的处理效果也优于PAC/PAM-O3工艺.当Ca(OH)2投加量为1 g/L、臭氧投加量为50 mg/L时,废水色度降低至10倍以下,COD小于150 mg/L.经Ca(OH)2混凝处理后,相对分子量在0.5～1.0 ku和10.0 ku以上的有机物显著减少;进一步臭氧氧化处理后,除0.5 ～1.0 ku范围的有机物大幅度增加外,其余分子量有机物显著减少.由于对色度贡献很大的大分子量物质的去除,废水的色度显著下降直至无色.     

石化综合污水处理厂出水溶解性微生物产物的特性

溶解性微生物产物(soluble microbial products,SMP)是生化系统出水残留COD的主要组成部分,通过采用分子量截留超滤分离、有机物树脂分离等方法对某石化综合污水处理厂出水SMP的分子量分布、亲水特性进行了分析研究.结果表明,水样中的SMP占出水残留COD的85%左右。SMP中主要成分是蛋白质,出水中小于1 kDa的有机物是SMP中的主要物质。树脂分离实验表明,亲水性有机物和疏水酸性有机物分别约占出水SMP的50%和20%,是需要进一步处理削减的主要物质类别。     

臭氧对超滤膜处理钱塘江水中有机物的影响研究

钱塘江水经臭氧化后过超滤膜,考察臭氧对超滤膜过滤地表水中有机物的作用,进而考察其对膜过滤特性的影响。结果表明,钱塘江水中的有机物以小分子、亲水组分为主;臭氧接触时间为20.0min时,膜出水中DOC和UV254的总去除率分别达到39.3%、73.1%;随着臭氧接触时间的增加,膜出水DOC中分子量3ku的有机物所占比例下降,分子量3ku的有机物所占比例几乎不变或稍有升高,膜出水UV_(254)中不同分子量有机物的比例变化与DOC相反;总体看来,投加臭氧使膜出水中强疏水组分的比例下降,弱疏水及亲水组分的比例则有增加趋势。臭氧化可有效缓解膜污染,臭氧接触时间为5.0min时膜污染下降率最大,为75.4%。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.