Sense or no-sense of the sum parameter for water soluble "adsorbable organic halogens" (AOX) and "absorbed organic halogens" (AOX-S18) for the assessment of organohalogens in sludges and sediments

"AOX" is the abbreviation of the sum parameter for water soluble "adsorbable organic halogens" in which 'A' stands for adsorbable, 'O' for organic and 'X' for the halogens chlorine, bromine and iodine.After the introduction of the AOX in 1976, this parameter has been correctly used for "real" AOX constituents (DDT and its metabolites, PCBs, etc.) but also misused for non-adsorbable adsorbed OX-compounds, mostly high molecular organohalogens in plants and even to inorganic compounds being neither organic nor adsorbable.The question of natural "Adsorbable Organic Halogens" (AOX) formed by living organisms and/or during natural abiogenic processes has been definitively solved by the known existence of already more than 3650 organohalogen compounds, amongst them the highly reactive, cancerogenic vinyl chloride (VC).The extension of the AOX to AOX-S18 for Sludges and Sediments, in which A stands for adsorbed (not for adsorbable) is questionable. It includes the most important water insoluble technical organochlorine product: polyvinyl chloride, PVC.In addition to organic halogens it also includes inorganic, mineralogenic halides, incorporated mainly in the crystal lattice of fine grained phyllosilicates, the typical clay minerals (kaolinite, montmorillonite, illite and chlorite) which are main constituents of sediments and sedimentary rocks representing the major part of the sedimentary cover of the earth.Other phyllosilicates, biotite and muscovite, major constituents of granites and many metamorphic rocks (gneiss and mica schist) will also contribute to the AOX-S18 especially in soils as result of weathering processes.Since chlorine is incorporated into the mineral structure and, as a consequence, not soluble by the nitric acid analytical step (pH 0.5) of the S18 determination, it will account to the AOX-S18 in the final charcoal combustion step at temperatures >950 degrees C.After heavy rainfalls sewage sludge composition is strongly influenced by mineralogenic components derived from the erosion of fine grained sediments or soils. Assuming 50% geogenic particles with a mean Cl concentration of 103 mg/kg (as in shales and clays) the mineralogenic Cl-content could add about 50 mg/kg to the organic AOX in sewage sludge.The occurrence of insoluble and non-adsorbable PVC in sewage sludge exhibits the same problems as the mineralogenic constituents: a detection as AOX-S18 is possible when the final high temperature analytical step is applied.Plants as major sources of organohalogens have never been doubted.Only recently [Science 295 (2002) 985] based on the determination of the form of Cl with near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy and extended X-ray adsorption showed the variations in the inorganic Cl(-) and organo-Cl compounds with increasing humification of plant leaves from "fresh leaves--senescent leaves on plants--senescent leaves on soil--powdered top soil--isolated soil humus". His finding of exclusively inorganic Cl(-) in the starting material (fresh leaves) is controverse to our earlier results indicating the presence of ionic inorganic Cl together with water insoluble absorbed organohalogens (AOX-S18) in eight different macrophytes of both terrestrial and marine environments.Our research on AOX in interstitial water of anaerobic limnic sediments has led to the role of bromine playing in the diagenesis of the organic matter of sediments. In sediments of Lake Constance Br(-) concentrations in lake water at the sediment water interface increased from <0.01 to 0.25 mg/l in the pore water at 77 cm sediment depth.In the Neckar River a Br concentrations of 0.02 mg/l at the water/sediment interface increasing to 0.74 mg/l in pore water in 85 cm depth was found. Here a parallel development could be found with ammonium concentration and alkalinity. The very high positive correlation ammonium:bromide and bromide:alkalinity leads to the conclusion, that bromine, originally a high molecular constituent of the organic matter, is released as bromide during an early dehalogenation stage of diagenesis.The mlusion, that bromine, originally a high molecular constituent of the organic matter, is released as bromide during an early dehalogenation stage of diagenesis.The main general reason to discard the AOX sum parameter as a whole lies in the fact, that adsorbable halogenated substances cannot a priori be categorized as natural/anthropogenic, biotic/abiotic, harmful/harmless. If applied to sludges and sediments, adsorbed organohalogens are not water soluble and therefore not adsorbable, and mineralogenic halogens (X) are neither organic nor adsorbable, and therefore by definition no AOX.     

Adsorption of arsenic(V) by iron-oxide-coated diatomite (IOCD)

Purposes and aims  

Economically efficient methods for removing arsenic from the drinking water supply are urgently needed in many parts of the world. Iron oxides are known to have a strong affinity for arsenic in water. However, they are commonly present in the forms of fine powder or floc, which limits their utility in water treatment. In this study, a novel granular adsorbent, iron-oxide-coated diatomite (IOCD), was developed and examined for its adsorption of arsenic from water.     

Effect of N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) on Cr(VI) reduction by Fe(II)

The complexation of Fe(II) with organic ligand results in the decrease of redox potential, and enhances the reduction ability of Fe(II). An important example is the use of Fe(II)-organic complexes to accelerate Cr(VI) reduction. Dissolved O(2) and light can potentially affect Cr(VI) reduction; however, these two factors have not been adequately evaluated. A batch technique was used to investigate the Cr(VI) reduction as influenced by the light and dissolved O(2) using N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) and Fe(II) solutions. The oxidation of Fe(II) by dissolved O(2) was rapid in the presence of HEDTA at low pH; nonetheless, the oxidation proceeded slowly when HEDTA was absent. Although Cr(VI) could be reduced by free Fe(II) at low pH, the reaction was considerably slower than that of systems involving HEDTA. The enhancement of Cr(VI) reduction by Fe(II) in the presence of high concentrations of HEDTA was achieved as a result of two processes. First, HEDTA acted as a ligand for expediting electron transfer between Fe(II) and Cr(VI). Secondly, HEDTA served as a reductant for Cr(VI) under illumination.     

Comments on "Sorption of triazoles to soil and iron minerals" by Y. Jia et al. [Chemosphere 67 (2007) 250-258

This letter suggests possible improvements on the discussion of the adsorptive removal of triazoles by iron minerals which are possible corrosion products of elemental iron materials (Fe0) in a recent article by Jia et al. [Jia, Y., Aagaard, P., Breedveld, G.D., 2007. Sorption of triaxoles to soil and iron materials. Chemosphere 67, 250-258]. Also recalled is the importance of the adsorption of organics by iron corrosion products which is not properly addressed in the iron technology literature when the contaminants are redox-sensitive.     

Chemical recycling of poly(ethylene terephthalate) (pet) by hydrolysis and glycolysis

In this paper we review an interesting method of PET recycling, i.e. chemical recycling; it is based on the concept of depolymerizing the condensation polymer through solvolytic chain cleavage into low molecular products which can be purified and reused as raw materials for the production of high-quality chemical products. In this work our attention is confined to the hydrolysis (neutral, acid and alkaline) and glycolysis processes of PET chemical recycling; operating conditions and mechanism of each method are reported and described. The neutral hydrolysis has an auto accelerating character; two kinetic models have been proposed: an half-order and a second order kinetic model. The acid hydrolysis could be explained by a modified shrinking core model under chemical reaction control and the alkaline hydrolysis by a first-order model with respect to hydroxide ion concentration. To describe glycolysis, two different kinetic models have been proposed where EG can act or not as internal catalyst. Further experimental and theoretical investigations are required to shed light on the promising processes of PET chemical recycling reviewed in this work.     

Adsorption and reduction of trichloroethylene by sulfidated nanoscale zerovalent iron (S-nZVI) supported by Mg(OH)2

Environmental Science and Pollution Research - Sulfidated nanoscale zerovalent iron (S-nZVI) supported on a flower spherical Mg(OH)2 with different Mg/Fe ration were successfully synthesized. The...     

Modeling of carbon dioxide fixation by microalgae using hybrid artificial intelligence (AI) and fuzzy logic (FL) methods and optimization by genetic algorithm (GA)

Environmental Science and Pollution Research - In this study, we are reporting a novel prediction model for forecasting the carbon dioxide (CO2) fixation of microalgae which is based on the hybrid...     

Uptake of weakly hydrophobic nitroaromatics from water by semipermeable membrane devices (SPMDs) and by goldfish (Carassius auratus)

Semipermeable membrane devices (SPMDs) filled with triolein, and goldfish (Carassius auratus) were simultaneously exposed to nine weakly hydrophobic nitroaromatics in a laboratory continuous-flow experiment. The results showed that the device concentrated the compounds in most cases to a larger extent than fish and that the overall uptake rate constants (Kmu) and average pollutant sampling rates (R(S)) were similar. We conclude that the SPMDs may be used to determine the levels of weakly hydrophobic nitroaromatics in water. It is obvious, however, that more researches at laboratory in order to establish kinetic database for a wide spectrum of compounds varying in lipophilicity and other properties are needed to elucidate various theoretical and practical aspects of the use of membranes in the environmental research and for related practical applications.     

Bioaccumulation of pentachlorophenol by killifish (Fundulussimilus)

Killifish ($\text{Fundulus}$$\text{similis}$) were exposed in the laboratory to pentachlorophenol (PCP) at concentrations of 57 to 610 μg PCP/L. Bioaccumulation reached a plateau value of about 53 by 168 hrs and remained at this level for at least 72 hrs. One-half the plateau value was reached in about 25 hrs. Following exposure, fish placed in PCP-free aquaria lost PCP rather slowly ($\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{～ 4.7}\text{days}$). The depuration data were suggestive of a pool of PCP which was lost more rapidly ($\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{～ 4.2}\text{hrs}$). The results of this study are compared to similar studies in other species. The bioaccumulation factors measured in this study agree relatively well with those in other marine species, but are lower than reported for fresh water species. Possible reasons for this difference are discussed.     

Biosynthesis of (S)-1-(1-naphthyl) ethanol by microbial ketoreductase

Environmental Science and Pollution Research - (S)-1-(1-naphthyl) ethanol (SNE) is a chiral drug intermediate for the production of mevinic acid analog, a potent cholesterol agent. It acts as an...     

Degradation of 2,7-dichlorodibenzo-p-dioxin by Fe(3+)-H(2)O(2) mixed reagent

Fe(3+)-H(2)O(2) mixed reagent, but not Fe(2+)-H(2)O(2), was found to be capable of degrading 2,7-dichlorodibenzo-p-dioxin (DCDD). A reaction mixture of FeCl(3) (8 mM) and H(2)O(2) (1%) caused approximately 50% degradation within 6 h and >90% degradation within 24 h at 27 degrees C. Increasing the temperature remarkably stimulated degradation: at 70 degrees C, approximately 100% degradation was achieved within 15 min. When DCDD-treated model soil (5 micrograms/g) was conducted, approximately 100% of the DCDD was degraded within 30 min at 70 degrees C (both reagents were added every 10 min). These results suggest that Fe(3+)-H(2)O(2) mixed reagent may be a new tool for combating persistent environmental pollutants such as dioxins and polychlorinated biphenyls.