Biochar from municipal solid waste for resource recovery and pollution remediation

Environmental Chemistry Letters - Open dumping of municipal solid waste is a common method of waste disposal in developing countries, thus leading to pollution by gaseous emissions and landfill...     

Effect of leachates from municipal solid wastes in the surface characteristics of calcareous soils located in Central Mexico

Anthropogenic activities induce changes in a series of soil features. For example, continuous contact between soil and municipal solid waste leachates can encourage weathering processes as well as other mineral transformation reactions; consequently, the soil loses the function of environmental protection. Pollution-induced changes in the surface properties and morphology of soils have been rarely studied. In this work, the surface characteristics of calcareous soil located at a municipal solid waste disposal site in central Mexico were studied. Soil characterisation was carried out to determine the mesoporous size, particle surface area and crystallinity of collected samples. Comparison of these characteristics was made between soil in continuous contact with leachate flow and soil not in contact with leachate. The characterisation was carried out using X-ray diffraction, thermal analysis and nitrogen adsorption at 77 K. The presence of Pb, Cd, Zn, Ni and Cr was examined in both soils. Leachates in contact with this soil showed characteristics typical of liquid produced by the decomposition of municipal solid waste (pH, dissolved oxygen, redox potential and alkalinity).     

城市生活垃圾治理过程的能源化技术

论述了垃圾多种治理技术以及这些技术中的能源化的关键。这些技术涉及垃圾卫生填埋、垃圾梦烧、垃圾衍生燃料技术、垃圾厌氧发酵和垃圾的热解气化等。针对中国垃圾的具体特点，对中国垃圾能源化提出一些初步方案和建议。     

北京市非正规垃圾填埋场垃圾成分特性

通过北京市3处典型非正规垃圾填埋场与1处正规垃圾卫生填埋场对比研究,结果表明,非正规垃圾填埋场与正规垃圾填埋场陈腐垃圾物理组成相近,但非正规垃圾填埋场有机物含量更低,同时垃圾分布不均匀;以建筑渣土为主的区域有机质含量一般低于5%;以生活垃圾为主的区域有机质含量与正规垃圾场相近,一般高于10%,内部最高温度可达42℃左右。     

Economic Efficiency Effects of Alternative Policies for Reducing Waste Disposal

Reducing the amount of municipal solid waste that is disposed of has become an important policy goal. Previous research argued that a virgin material tax offered an efficient method of meeting this goal and it continues to be considered as a policy option today. This paper demonstrates, however, that a virgin material tax is not an efficient method of reducing waste, but that an alternative policy-a combined disposal tax and reuse subsidy-is. The combined disposal tax and reuse subsidy is theoretically consistent with unit-based household charges for waste disposal, but may have advantages in some situations.     

Role of rural solid waste management in non-point source pollution control of Dianchi Lake catchments, China

In recent years, with control of the main municipal and industrial point pollution sources and implementation of cleaning for some inner pollution sources in the water body, the discharge of point source pollution decreased gradually, while non-point source pollution has become increasingly distressing in Dianchi Lake catchments. As one of the major targets in non-point source pollution control, an integrated solid waste controlling strategy combined with a technological solution and management system was proposed and implemented based on the waste disposal situation and characteristics of rural solid waste in the demonstration area. As the key technology in rural solid waste treatment, both centralized plant-scale composting and a dispersed farmer-operated waste treating system showed promise in rendering timely benefits in efficiency, large handling capacity, high quality of the end product, as well as good economic return. Problems encountered during multi-substrates co-composting such as pathogens, high moisture content, asynchronism in the decomposition of different substrates, and low quality of the end product can all be tackled. 92.5% of solid waste was collected in the demonstration area, while the treating and recycling ratio reached 87.9%, which prevented 32.2 t nitrogen and 3.9 t phosphorus per year from entering the water body of Dianchi Lake after implementation of the project.     

Indicating landfill stabilization state by using leachate property from Laogang Refuse Landfill

Variation and evolution process of leachate can be applied as a reference for landfill stabilization phase. In this work, leachates with different ages were collected from Laogang Refuse Landfill, and characterized with 14 key parameters. Simultaneously, principal component analysis （PCA） was applied to develop a synthetic parameter-F based on these 14 parameters, and a logarithm equation was simulated for the landfill stabilization process finally. It was predicted that leachates would meet Class I and Class II in standard for pollution control on the landfill site of municipal solid waste （GB 16889-1997） after 32 years and 22 years disposal under the natural attenuation in the humid and warm southern areas of China, respectively. The predication of landfill state would be more accurate and useful according to the synthetic parameter F of leachate from a working landfill.     

The socially optimal recycling rate: Evidence from Japan

This paper estimates the average social cost of municipal waste management as a function of the recycling rate. Social costs include all municipal costs and revenues, costs to recycling households to prepare materials estimated with an original method, external disposal costs, and external recycling benefits. Results suggest average social costs are minimized with recycling rates well below observed and mandated levels in Japan. Cost-minimizing municipalities are estimated to recycle less than the optimal rate. These results are robust to changes in the components of social costs, indicating that Japan and perhaps other developed countries may be setting inefficiently high recycling goals.     

Repercussions of COVID-19 pandemic on solid waste generation and management strategies

• Implication of COVID-19 on medical waste and MSW generation is studied. • Challenges and effective strategy of solid waste generation is reviewed. • 2.9 million tons of COVID-19 related medical waste has been generated until Sep. 22. • The pandemic has postponed policies related to the reduction of plastic use. • Blockade resulted in a significant drop in waste generation in some regions. It has been over ten months since the beginning of the 2019 coronavirus disease (COVID-2019), and its impact on solid waste management, especially medical waste, is becoming clearer. This study systematically reviews the potential influences of the COVID-19 pandemic on medical waste, personal protection equipment waste and municipal solid waste (MSW), and discusses the corresponding measures and policies of solid waste management in typical countries. The results show that the generation of medical waste from the pandemic increased significantly, with 18%‒425% growth. It is estimated that the daily output of COVID-19 medical waste increased from 200 t/d on Feb. 22 to over 29000 t/d at the end of September 2020 throughout the world. The use of personal protective equipment will continue to grow in the long-term, while the blockade and isolation measures greatly reduced the volume of commercial waste, especially for tourist cities, and part of this waste was transferred to household waste. Residents’ attitudes and behavior toward food waste have changed due to the COVID-19 pandemic. In response to the pandemic, international organizations and several countries have issued new policies and guidelines and adjusted their management strategies for medical waste and MSW treatment. The pandemic has brought specific challenges to the disposal capacity of medical waste worldwide. It has also brought about the stagnation of policies related to the reduction of plastic products and waste recycling. This study will provide some useful information for managers and governmental officials on effective solid waste management during and after the COVID-19 pandemic.     

城市生活垃圾处理技术现状与管理对策

近年来,我国城市生活垃圾产生量每年以约10%的速度迅猛增长,而城市生活垃圾处理能力发展相对滞后。客观评述城市生活垃圾常用的填埋、焚烧、堆肥3种处理技术的优缺点和在国内的应用现状,并针对城市生活垃圾在收运、处理以及管理等环节中存在的突出问题,提出了明确的建议与措施：首先,完善相关法规政策,实施分类收集,加强源头控制;其次,创新管理体制,推行市场化运作机制,政府加强政策引导和监督;再次,按照＂谁污染,谁付费＂的原则,建立健全垃圾收费体系;最后,充分利用各种媒介,加大宣传力度,提高公众环保意识。同时,还探讨了城市生活垃圾处理技术发展的趋势。焚烧处理将是今后一段时期我国最有发展潜力的技术,气化熔融焚烧技术是一种高效资源化、污染物接近零排放的新型焚烧技术;生物反应器填埋技术可减少渗滤液处理量、降低垃圾处理成本,具有广阔的发展前景;堆肥技术可作为焚烧或填埋之前的预处理手段;城市生活垃圾综合处理集多种处理技术的优点于一体,在节约处理成本,提高经济效益的同时,实现了垃圾的减量化、资源化、无害化,是未来我国生活垃圾处理的优先发展方向。     

Environmental policy with collective waste disposal

Centralized collection and disposal is an integral component of waste management strategies for many solid and liquid wastes, and carbon capture and storage is currently being considered for gaseous waste. In this paper we show how collective waste disposal systems introduce essential changes in the design of optimal environmental policy. Absent collective disposal, an optimal environmental policy imposes relatively stringent regulations on polluters in regions where local environmental damage functions are “high”; however, under collective waste disposal, the optimal environmental policy level increases monotonically over distance from the disposal site, and this is true irrespective of the degree of spatial heterogeneity in local environmental damage functions. We characterize the optimal spatial pattern of environmental policy levels under collective waste disposal and identify optimal membership size for waste disposal networks comprised of homogeneous producers.     

Conditionally predictive supply elasticity estimates: Secondary materials obtained from municipal residuals

New capital-intensive waste processing plants have been developed that can recover secondary materials and energy from the municipal solid waste stream resulting in lower disposal costs than traditional methods. The potential supply of secondary glass, ferrous metals, aluminum, and energy is estimated using an engineering cost model of secondary materials and energy supply under alternative prices for energy and materials. Econometric estimates of the own- and cross-price elasticities of supply for the materials and energy are then estimated from the data set. Significant cross-price effects are shown.     

废弃塑料包装物的管理及资源、环境评价

由于塑料包装材料具有明显的资源优势,而获得广泛应用。但塑料材料的原料——石油,目前面临枯竭窘境。同时,塑料包装废弃物的处理存在巨大的环境压力。焚烧包括塑料包装废弃物在内的生活垃圾,用于发电,是日本曾经采取的方法。近年来,因存在难以逾越的生态环境问题,而逐渐废止。工业生态学的材料流的循环利用模式,是解决资源耗尽、废物充斥的理想方法。源头分离是城市固体废弃物资源化的前提条件。按塑料品种分类回收,以材料形式重复利用,保留了塑料的材料价值,还需要解决,再加工过程造成材料力学性能下降的问题。将单一品种塑料转化成单体,不同塑料品种的单体转化率有很大差距,缩合聚合物较高,而PP、PE等则不然。混合塑料的热裂解可获得化工原料和燃料,又达到减少垃圾总量和石油资源循环利用的效果,具有开发潜力。填埋方式占用土地又人为阻碍了有机垃圾回归生物圈。控制性堆肥对避免大量使用化肥、农药造成的生态环境灾难,再建农业生产的可持续性模式,发挥重要作用。生物降解塑料袋对堆肥的实施,具有特殊价值。PET和E-CO在食品包装某些应用领域有优势,而PVC食品包装物的使用和废弃后再利用都存在问题。     

Ablagerung toxischer Chemieabfälle im August 2006 in Abidjan, Republik Côte d’Ivoire: Versuch einer Rekonstruktion

Background

Globally, every year several hundred million tons of problematic, e.g. chemical, wastes are generated stemming to more than 90% from the 25 OECD countries. Due to their partly considerable toxicity special and often expensive measures are required for their disposal. According to the Secretary of the ‘Basel Convention on the Control of Transboundary Movements of Hazardous Waste and Their Disposal’ annually at least 8.5 million tons of wastes are transboundarily traded. Although the ‘Basel Convention’ has set up rules how to handle international waste streams, certain waste amounts are illegally transported from the OECD countries to developing countries — basically for reasons of expenses. Often an environmental safe treatment of toxic waste is not ensured or even not possible in the receiving countries. As set forth in a report of the European Network for the Implementation and Enforcement of Environmental Law (IMPEL) published in 2006, the illegal trade with toxic waste has steadily increased. 3000 shipping documents of 17 European seaports were examined and 258 cargo holds were inspected showing that 68 of 140 waste shippings were illegal. Preventing illegal transports of waste meets with various obstacles. Controlling measures require considerable personal, technical, and logistic resources that are not sufficiently available in each country concerned. Missing or ineffective administrative structures hamper fast actions to stop illegal waste disposal. Partly, the political will to take the necessary steps is lacking. An additional problem is the fact that waste that is obtained from the regular shipping business is not subject to the Basel Convention but to the ‘International Convention for the Prevention of Pollution from Ships’. The implementing statures are summarized in the document MARPOL 73/78; the International Maritime Organization (IMO) is responsible. Identifying the origin of waste and thus defining the responsibility occasionally raises difficulties. This background provides a basis to try to reconstruct the course of events concerning the disposal of chemical waste in Abidjan.

Methods

Several information sources were utilized to reconstruct the course of events at Abidjan in August 2006; e.g. public press, declarations of international governmental organizations, especially of the UN and of its subsidiary organizations, communiqués of the Secretary of the Basel Convention, and statements of several NGOs. Nevertheless a complete reconstruction of the incident is impossible, since a detailed and reliable historical report is not available. Furthermore the responsible politicians have not undertaken significant efforts to shed light upon the incident. Additionally relevant documents of the participating companies are not available to the public.

Conclusions

The analyzed incident makes obvious that the control mechanisms of the Basel Convention can be circumvented. It remains unclear who has to take the political responsibility for the death of 10 people and for the health defects of thousands of humans. Possible civil and criminal consequences are not foreseeable for the actors and company owners involved in the illegal waste dumping. The people of Abidijan are confronted with unresolved questions regarding the occurrence of chronic diseases and possible long-term effects of remaining waste portions.

Recommendations and Perspectives

The incident demonstrates that the control of the transboundary transport and disposal of hazardous waste needs to be enforced and legal grey areas should be eliminated. It should be a task of the OECD countries and of all other economically and technically developed countries and organizations to support the developing countries’ efforts to build up the personal, technical, and infrastructural capacities for an efficient control of waste imports.     

Municipal solid waste management in Dalian: practices and challenges

The fast growing of urban areas in developing countries has brought serious problems on municipal solid waste (MSW) management. It will be rational to adopt an integrated approach to deal with such a challenge so that the overall eco-efficiency of MSW management could be improved. To better examine how attributes of integrated MSW management are being interpreted and put into practice, and to explore what changes should be made to improve the application of integrated MSW management, we employ a case study method so that lessons learned could be used to inform initiatives in other cities and the potential solution may offer feasible strategies. The case study city is Dalian, a typical seaport city with fast growing rate in economy. The outcomes of this case study show us that fragmented management structure, ineffective and inefficient enforcement of relevant regulations, backward technologies, limited financial resources and lack of public participation are main barriers for the implementation of integrated MSW management. Consequently, in order to overcome these barriers, we propose an integrated management framework on MSW management, aiming to maximize the overall eco-efficiency of MSW management.     

城市固体废弃物的预处理系统研究

对城市生活垃圾处置前进行有效的预处理,不仅可以减少处理量,提高处理的效果,而且可以回收部分资源性物质。由于垃圾的特性多变及处理方式的不同,统一的处理系统不仅难以达到处理垃圾的要求,而且可能造成不必要的浪费。文章针对垃圾焚的需求以及垃圾的特点,分析了垃圾焚烧炉预处理系统的设计和设计设备参数的确定,并介绍了与循环流化床垃圾焚烧炉配套的预处理系统。     

Development of machine learning multi-city model for municipal solid waste generation prediction

● A database of municipal solid waste (MSW) generation in China was established. ● An accurate MSW generation prediction model (WGMod) was constructed. ● Key factors affecting MSW generation were identified. ● MSW trends generation in Beijing and Shenzhen in the near future are projected. Integrated management of municipal solid waste (MSW) is a major environmental challenge encountered by many countries. To support waste treatment/management and national macroeconomic policy development, it is essential to develop a prediction model. With this motivation, a database of MSW generation and feature variables covering 130 cities across China is constructed. Based on the database, advanced machine learning (gradient boost regression tree) algorithm is adopted to build the waste generation prediction model, i.e., WGMod. In the model development process, the main influencing factors on MSW generation are identified by weight analysis. The selected key influencing factors are annual precipitation, population density and annual mean temperature with the weights of 13%, 11% and 10%, respectively. The WGMod shows good performance with R² = 0.939. Model prediction on MSW generation in Beijing and Shenzhen indicates that waste generation in Beijing would increase gradually in the next 3–5 years, while that in Shenzhen would grow rapidly in the next 3 years. The difference between the two is predominately driven by the different trends of population growth.     

A new method to inertize incinerator toxic fly ash with silica from rice husk ash

Fly ash from municipal solid waste incineration is a toxic waste due to the presence of toxic heavy metals. Here, a new method for metal stabilization based on the use of silica gel extracted from rice husk ash is presented. This method is sustainable because of the use of only waste materials to produce a final inert product, and because the inertization procedure occurs at room temperature. The estimated maximum Pb adsorption capacity of extracted silica, of about 36 mg/g, is found to be far greater than the adsorption capacity of other known absorbers used for municipal solid waste incineration fly ash.     

Best waste management programs (BWMPs) for marinas: A case study

Marinas are usually located in coastal waters, but can also be found in lakes and rivers. Due to the activities that take place in marinas various contaminants are discharged. Specific measures have to be taken in order to keep the marina environment clean and healthy. Experiences from developed countries have shown that the most effective way to reduce pollution in marinas is the implementation of waste management programs. To this end, ‘Best Waste Management Programs’ (BWMPs) have been employed in the USA and other countries. However, in developing countries lack of available financial resources and unawareness of the concept of clean marinas may hinder the activities towards the application of BWMPs. The aim of this study is to address BWMPs in general and explain waste sources and disposal methods for marinas and yachting activities. The Kusadasi Setur marina in Turkey is investigated particularly as an example of a marina in a developing country and management measures taken in this marina are evaluated. The various kinds of waste generated in the marina are described and preventive measures against pollution taken in the marina are reviewed. Finally the importance of management programs towards the mitigation of pollution problems is emphasized.     

基于投影寻踪的广东省资源环境绩效评估与分析

采用基于投影寻踪的资源环境综合绩效指数（REPIPP）,对2007年广东省各市的资源环境绩效进行了评估与分析。研究结果表明,全省资源环境绩效水平空间差异明显,呈现珠江三角洲地区高于东西两翼和粤北地区、沿海城市高于内陆城市的特点,与广东省的区域经济发展格局基本一致;在各项指标中,工业固废排放绩效的权重较大,落后地区应特别注意加强环境保护和发展循环经济,减少工业固废排放;REPIPP与人均GDP具有一定的正相关关系,但并不完全由人均GDP决定,必须通过优化经济结构、增强科技创新水平和管理水平、加强环境保护等综合措施来提高资源环境绩效水平。