How to bend down the environmental Kuznets curve: the significance of biomass energy

Sources of renewable energy have received wide attention in the literature because of serious threats to the environment. However, some renewable resources, including biomass energy role is debatable in the energy economics literature. This empirical work focuses to analyze the role of biomass energy in carbon dioxide (CO₂) emissions using the framework of the environmental Kuznets curve (EKC) in Pakistan over the period from 1980 to 2015. The bound testing approach suggests there is cointegration among study variables. The study uses an auto-regressive distributed lag model (ARDL) with a structural break in the series. To summarize the findings of the study, it can be inferred that biomass energy increase CO₂ emissions. In addition, biomass energy helps to form a U-shaped relationship between income and CO₂ emissions that support the EKC hypothesis. Also, the feedback hypothesis is found between biomass energy and CO₂ emissions. The findings would guide policymaker with practical guidelines to formulate policies to utilize a high amount of biomass energy in a sustainable manner.

     

Economic complexity,ICT, biomass energy consumption,and environmental degradation: evidence from Iran

Economic complexity, biomass energy consumption, and information communication technology (ICT) have diverse impacts on energy consumption and carbon dioxide (CO₂) emissions. Nevertheless, analysis of these variable effects is not addressed in the previous literature; the antiqueness of this article is stuffing this gap. This study assessed the relationship between gross domestic product (GDP) per capita, biomass consumption, economic complexity index (ECI), ICT, and CO₂ emissions in Iran in 1994–2018. The autoregressive distributed lag (ARDL) model and the quantile regression (QR) econometric technique were used to investigate the factors affecting CO₂ emissions in the tails of the conditional distribution. The share of each influential factor was predicted through the variance decomposition analysis (VD) for the next 10 years. The empirical results showed a long-run relationship between the variables. So, the variables of biomass consumption, ECI, and ICT improve the quality of the environment in Iran by reducing CO₂ emissions, and the per capita GDP variable increases CO₂ emissions. Results suggest no evidence indicating the presence of environmental Kuznets curve (EKC); however, QR demonstrated the existence of EKCs in the lower quantiles of the conditional distribution. The ECI will have the most share to change the CO₂ emissions in the future. The income threshold should be determined at the turning point of the EKC to increase economic development. Moreover, investing in increasing biomass consumption is vital. Policymakers also need to consider strict added value for the export of products.

     

Biomass consumption and CO2, CO and main hydrocarbon gas emissions in an Amazonian forest clearing fire

Biomass consumption and CO₂, CO and hydrocarbon gas emissions in an Amazonian forest clearing fire are presented and discussed. The experiment was conducted in the arc of deforestation, near the city of Alta Floresta, state of Mato Grosso, Brazil. The average carbon content of dry biomass was 48% and the estimated average moisture content of fresh biomass was 42% on wet weight basis. The fresh biomass and the amount of carbon on the ground before burning were estimated as 528 t ha^?1 and 147 t ha^?1, respectively. The overall biomass consumption for the experiment was estimated as 23.9%. A series of experiment in the same region resulted in average efficiency of 40% for areas of same size and 50% for larger areas. The lower efficiency obtained in the burn reported here occurred possibly due to rain before the experiment. Excess mixing ratios were measured for CO₂, CO, CH₄, C₂–C₃ aliphatic hydrocarbons, and PM_2.5. Excess mixing ratios of CH₄ and C₂–C₃ hydrocarbons were linearly correlated with those of CO. The average emission factors of CO₂, CO, CH₄, NMHC, and PM_2.5 were 1,599, 111.3, 9.2, 5.6, and 4.8 g kg^?1 of burned dry biomass, respectively. One hectare of burned forest released about 117,000 kg of CO₂, 8100 kg of CO, 675 kg of CH₄, 407 kg of NMHC and 354 kg of PM_2.5.     

The study on biomass fraction estimate methodology of municipal solid waste incinerator in Korea

In Korea, the amount of greenhouse gases released due to waste materials was 14,800,000 t CO₂eq in 2012, which increased from 5,000,000 t CO₂eq in 2010. This included the amount released due to incineration, which has gradually increased since 2010. Incineration was found to be the biggest contributor to greenhouse gases, with 7,400,000 t CO₂eq released in 2012. Therefore, with regards to the trading of greenhouse gases emissions initiated in 2015 and the writing of the national inventory report, it is important to increase the reliability of the measurements related to the incineration of waste materials.

This research explored methods for estimating the biomass fraction at Korean MSW incinerator facilities and compared the biomass fractions obtained with the different biomass fraction estimation methods. The biomass fraction was estimated by the method using default values of fossil carbon fraction suggested by IPCC, the method using the solid waste composition, and the method using incinerator flue gas.

The highest biomass fractions in Korean municipal solid waste incinerator facilities were estimated by the IPCC Default method, followed by the MSW analysis method and the Flue gas analysis method. Therefore, the difference in the biomass fraction estimate was the greatest between the IPCC Default and the Flue gas analysis methods. The difference between the MSW analysis and the flue gas analysis methods was smaller than the difference with IPCC Default method. This suggested that the use of the IPCC default method cannot reflect the characteristics of Korean waste incinerator facilities and Korean MSW.

Implications: Incineration is one of most effective methods for disposal of municipal solid waste (MSW). This paper investigates the applicability of using biomass content to estimate the amount of CO₂ released, and compares the biomass contents determined by different methods in order to establish a method for estimating biomass in the MSW incinerator facilities of Korea. After analyzing the biomass contents of the collected solid waste samples and the flue gas samples, the results were compared with the Intergovernmental Panel on Climate Change (IPCC) method, and it seems that to calculate the biomass fraction it is better to use the flue gas analysis method than the IPCC method. It is valuable to design and operate a real new incineration power plant, especially for the estimation of greenhouse gas emissions.     

Soil CO2 fluxes from direct seeding rice fields under two tillage practices in central China

Agricultural practices affect the production and emission of carbon dioxide (CO₂) from paddy soils. It is crucial to understand the effects of tillage and N fertilization on soil CO₂ flux and its influencing factors for a better comprehension of carbon dynamics in subtropical paddy ecosystems. A 2-yr field study was conducted to assess the effects of tillage (conventional tillage [CT] and no-tillage [NT]) and N fertilization (0 and 210 kg N ha^?1) on soil CO₂ fluxes during the 2008 and 2009 rice growing seasons in central China. Treatments were established following a split-plot design of a randomized complete block with tillage practices as the main plot and N fertilizer level as the split-plot treatment. The soil CO₂ fluxes were measured 24 times in 2008 and 17 times in 2009. N fertilization did not affect soil CO₂ emissions while tillage affected soil CO₂ emissions, where NT had similar soil CO₂ emissions to CT in 2008, but in 2009, NT significantly increased soil CO₂ emissions. Cumulative CO₂ emissions were 2079–2245 kg CO₂–C ha^?1 from NT treatments, and 2084–2141 kg CO₂–C ha^?1 from CT treatments in 2008, and were 1257–1401 kg CO₂–C ha^?1 from NT treatments, and 1003–1034 kg CO₂–C ha^?1 from CT treatments in 2009, respectively. Cumulative CO₂ emissions were significantly related to aboveground biomass and soil organic C. Before drainage of paddy fields, soil CO₂ fluxes were significantly related to soil temperature with correlation coefficients (R) of 0.67–0.87 in 2008 and 0.69–0.85 in 2009; moreover, the Q₁₀ values ranged from 1.28 to 1.55 and from 2.10 to 5.21 in 2009, respectively. Our results suggested that NT rice production system appeared to be ineffective in decreasing carbon emission, which suggested that CO₂ emissions from integrated rice-based system should be taken into account to assess effects of tillage.     

Catalytic CO2 gasification of rubber seed shell-derived hydrochar: reactivity and kinetic studies

In this study, hydrothermal carbonization (HTC) of a biomass was used as a means to improve the physicochemical properties of rubber seed shell (RSS) and enhance its reactivity in the char-CO₂ gasification reaction, known as the Boudouard reaction (C + CO₂ ? 2CO). Hydrochar samples were developed by hydrothermal treatment of RSS, without separating the solid residue from the liquid product, at 433, 473, 513, and 553 K under autogenous pressure. The CO₂ gasification reactivity of the developed hydrochars was then investigated at different heating rates (5, 10, 20, and 30 K/min) by the non-isothermal thermogravimetric method. The hydrochars revealed higher reactivity and improved gasification characteristics compared to the untreated biomass, while the hydrochar which was filtered from the liquid slurry showed lower reactivity compared to the untreated biomass. This was due to the chemical and structural evolutions of the biomass during hydrothermal treatment as indicated by various analyses. The gasification reactivity of the hydrochar was substantially enhanced by introduction of a catalyst (NaNO₃) during HTC. Kinetic analysis of the char-CO₂ gasification reaction was carried out by applying Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink isoconversional methods, and thermodynamic parameters were also determined. The activation energy of the Na-loaded RSS hydrochar in CO₂ gasification (120–154 kJ/mol) was considerably lower than that of the untreated biomass (153–172 kJ/mol). Thermodynamic studies also confirmed the promoting effect of hydrothermal treatment and catalyst impregnation on enhancement of reactivity of the virgin biomass and reduction of gasification temperature.

     

Measurement of bioactivity based on CO2-release and ATP content in soils after different treatments

Adenosine triphosphate (ATP) content and carbon dioxide (CO₂) production in soil vary considerably, depending on soil type, water content, light, stirring of soil, storage conditions, date of sampling, and chemicals added. In most soils, the biomass calculated on the basis of ATP-content was in line with that calculated on the basis of CO₂-production.     

Dynamic NO adsorption characteristics of iron-treated activated carbon fibers

The breakthrough curve for NO adsorption on the activated carbon fibers treated in iron salt solutions was determined. They can adsorb much more NO than granular activated carbon by a factor of more than 10 from a flowing 300 ppm NO-N₂ mixed gas at 100°C and 20 ml min⁻¹; the most effective one of the iron-treated carbon fibers of 0.2 g is able to reduce the NO concentration from 300 ppm to 30 ppm. These adsorbents can adsorb the same amount of NO from even a 300 ppm NO-500 ppm SO₂-10% CO₂-10% H₂O-1% O₂-N₂ mixed gas.     

Estimate of total CO2 output from desertified sandy land in China

Soil is an important factor in regional and global carbon budgets because it serves as a reservoir of large amount of organic carbon. In our study, using remote sensing data of different periods we analyzed the development and reversion of desertification in China, calculated the variations of organic carbon contents of the desertified lands in China. The results showed that the total storage of organic carbon in 0–50 cm soil layer of the desertified lands is 855 Mt. In recent 40 yr, the total CO₂ amount released by land desertification processes to the atmosphere was 150 Mt, while the CO₂ amount sequestered by desertification reversing processes corresponded to 59 Mt C. Hence, the net CO₂ amount released from desertified lands of China corresponded to 91 Mt C, about 68.42% of the 133 Mt C of annual CO₂ release in the global temperate and frigid zones. Simultaneously, it indicated that CO₂ amount sequestered by desertification reversing processes in desertified land had greater potential than the other soils.     

Woody biomass and RPF gasification using reforming catalyst and calcium oxide

This study focused on steam gasification and reforming of waste biomass using a reforming catalyst. The purpose of the study was to evaluate the durability of a commercial Ni reforming catalyst and the effect of CaO on the reforming behavior, and to clarify detailed factors of catalytic performance, as well as the effect of operating parameters on the characteristics of produced gas composition. Moreover, catalyst regeneration was carried out and the behavior of catalytic activity based on gas composition was investigated. Using a fluidized bed gasifier and a fixed bed reformer, gasification and reforming of waste biomass were carried out. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. Temperature of the gasifier and reformer was almost 1023 K. Ratio of steam to carbon in the feedstock [mol mol⁻¹] and equivalence ratio (i.e., ratio of actual to theoretical amount of oxygen) [-] were set at about 2 and 0.3, respectively. The feed rate of the feedstock into the bench-scale gasifier was almost 15 kg h⁻¹. The results of waste biomass gasification confirmed the improvement in H₂ composition by the CO₂ absorption reaction using the reforming catalyst and CaO. In addition, CaO proved to be especially effective in decreasing the tar concentration in the case of woody biomass gasification. Catalytic activity was maintained by means of catalyst regeneration processing by hydrogen reduction after air oxidation when woody biomass was used as feedstock.     

城市污水污泥处置方式的温室气体排放比较分析

针对我国现在主流的城市污水污泥处置方法:填埋,焚烧,堆肥。用IPCC中推荐的方法和缺省值,对处置过程中产生的温室气体的直接排放、间接排放和替代排放做了计算和分析。填埋过程计算排放的温室气体有CH4,焚烧过程计算排放的有温室气体CO2和N2O,堆肥过程计算的排放的有温室气体CO2和N2O,最终比较的结果都折算成CO2的排放。结果表明,污泥填埋、焚烧、堆肥所产生的CO2的净排放量分别为695.847 kg CO2/t、443.643 kg CO2/t、511.817 kgCO2/t。由于考虑了堆肥以后的有机肥利用,从减排以及污泥资源化的角度分析,得出堆肥是相对好的污泥处置方式。     

2,4,6-Trinitrotoluene mineralization and bacterial production rates of natural microbial assemblages from coastal sediments

The nitrogenous energetic constituent, 2,4,6-Trinitrotoluene (TNT), is widely reported to be resistant to bacterial mineralization (conversion to CO₂); however, these studies primarily involve bacterial isolates from freshwater where bacterial production is typically limited by phosphorus. This study involved six surveys of coastal waters adjacent to three biome types: temperate broadleaf, northern coniferous, and tropical. Capacity to catabolize and mineralize TNT ring carbon to CO₂ was a common feature of natural sediment assemblages from these coastal environments (ranging to 270+/−38 μg C kg⁻¹ d⁻¹). More importantly, these mineralization rates comprised a significant proportion of total heterotrophic production. The finding that most natural assemblages surveyed from these ecosystems can mineralize TNT ring carbon to CO₂ is consistent with recent reports that assemblage components can incorporate TNT ring carbon into bacterial biomass. These data counter the widely held contention that TNT is recalcitrant to bacterial catabolism of the ring carbon in natural environments.     

The C02 Pulse Technique for Determining the Condition of Adsorbent Charcoal Beds

Activated charcoal is widely used for the purification of air. Charcoal has a large surface area (ca. 1000 square meters per gram) and acts to purify air by adsorbing gaseous pollutants on its surface. When the capacity of the surface is exhausted, the charcoal is no longer effective and must be replaced.

The carbon dioxide (CO₂) pulse technique, developed at NRL, is a non-destructive method by which one can determine the remaining capacity, or the residual life of a charcoal bed before it has become exhausted. A dose of CO₂ is injected into the air stream ahead of the charcoal bed and is eluted through the bed. The shape of the emerging CO₂ elution peak is determined by the condition of the charcoal bed. For a new, unused charcoal bed the CO₂ elution peak is considerably dispersed (flattened and broadened) due to adsorption and desorption at the charcoal surface. For a partially spent bed the elution peak is dispersed to a degree proportional to the remaining capacity of the bed. For a fully spent bed the CO₂ elution peak is little affected by passage through the bed.

The carbon dioxide puise technique has been shown to be indicative of charcoal capacity for a wide range of non-polar materials (such as hydrocarbons, alcohols, etc.), which are taken up primarily by physical adsorption. The method is essentially insensitive to relative humidity in the range between 10 and 70%. An adaptation of the method has been used for detection of leaks in a charcoal bed, such as those caused by channeling, faulty packing, etc.     

Quantification of airborne fossil and biomass carbonylic carbon by combined radiocarbon and liquid chromatography mass spectrometry

Airborne carbonyl compounds have been sampled at three European semi-remote to semi-urban test sites for radiocarbon (¹⁴C) analysis. The used methodology included collection on 2,4-dinitrophenylhydrazine coated silica gel cartridges, chromatographic isolation of the formed hydrazones, combustion into CO₂, reduction into graphite followed by accelerator mass spectrometry. In combination with this, liquid chromatography coupled to atmospheric pressure chemical ionisation mass spectrometry was used for chemical speciation of the collected carbonyls.At all sites the carbonyls were found to be of a mixed biogenic/anthropogenic origin. The determining factor for the proportion of fossil (anthropogenic) carbon in the samples was the vicinity of urban sources for carbonyls and their photochemical precursors. At meteorological conditions, which gave the test sites semi-rural/semi-remote characteristics the samples contained an average of 24% (range: 10–34%) of fossil carbonylic carbon. When air masses were transported from urban areas to the test-sites significantly higher proportions of fossil carbonylic carbon were determined with a maximum of 61%. Principal component analysis on this limited data set indicated that a low fossil proportion of carbonylic carbon is associated with high proportions of acetaldehyde, acetone, pentanone and acrolein. Until further radicarbon studies are carried out the conclusion remains that for the carbonyl compounds measured European background levels are of a predominant biogenic origin.     

Gas reforming and tar decomposition performance of nickel oxide (NiO)/SBA-15 catalyst in gasification of woody biomass

In the gasification of biomass, it is necessary to limit the amount of by-product tar and increase the yields of hydrogen (H₂) and carbon monoxide (CO) (syngas). Therefore, we conducted gasification and reforming experiments on woody biomass using an electric tubular furnace, to evaluate the gas reforming and tar decomposition performance of a NiO/SBA-15 catalyst. As a result, we found that this catalyst is effective for H₂ production. It is believed that the increase in H₂ volume due to the catalyst occurs through a steam reforming reaction involving hydrocarbons, including methane (CH₄), and the water-gas shift reaction. With respect to the influence of the gasifying agent on the reforming effect of the catalyst, the amount of generated carbon dioxide (CO₂) and hydrogen (H₂) increases because the shift reaction is promoted by supplying steam. On the other hand, it was inferred that the shift reaction rarely occurred because it approaches equilibrium by supplying O₂. Furthermore, it is suggested that light aromatic hydrocarbons are decomposed by the catalyst.

Implications: The mesoporous silica catalyst NiO/SBA-15 was highly effective for H₂ production and decomposition of light aromatic compounds in the gasification of woody biomass. In the catalyst reaction, supplying steam promoted H₂ production. From thermodynamic analysis and discussion, it was also inferred that supplying O₂ might prevent the water gas shift reaction. The results are useful for designing a process needed for rich H₂ production and gas refining process for further use of syngas.     

空速和二氧化碳对沼气脱硫剂硫容确定的影响

为了弄清空速与二氧化碳含量对氧化铁脱硫剂硫容确定的影响,分别在实验气源为纯硫化氢,空速为40、80、120和160 h-1以及实验气源为二氧化碳含量分别在0%、20%、40%和80%,其余为硫化氢,空速为80 h-1条件下,对T502(粗脱硫剂)和HXT-2(精脱硫剂)2种氧化铁脱硫剂进行了不同测试条件对氧化铁硫容确定影响的研究。研究结果表明,T502和HXT-2氧化铁脱硫剂硫容测试结果随着空速和二氧化碳含量增加而减少,结果显示了在空速较低条件下(120h-1),二氧化碳含量在40%以下时对氧化铁脱硫剂硫容测试结果影响不大,但二氧化碳含量在40%以上时,对氧化铁脱硫剂硫容测试结果影响显著。     

The growth response of Alternanthera philoxeroides in a simulated post-combustion emission with ultrahigh [CO2] and acidic pollutants

Although post-combustion emissions from power plants are a major source of air pollution, they contain excess CO₂ that could be used to fertilize commercial greenhouses and stimulate plant growth. We addressed the combined effects of ultrahigh [CO₂] and acidic pollutants in flue gas on the growth of Alternanthera philoxeroides. When acidic pollutants were excluded, the biomass yield of A. philoxeroides saturated near 2000 μmol mol⁻¹ [CO₂] with doubled biomass accumulation relative to the ambient control. The growth enhancement was maintained at 5000 μmol mol⁻¹ [CO₂], but declined when [CO₂] rose above 1%, in association with a strong photosynthetic inhibition. Although acidic components (SO₂ and NO₂) significantly offset the CO₂ enhancement, the aboveground yield increased considerably when the concentration of pollutants was moderate (200 times dilution). Our results indicate that using excess CO₂ from the power plant emissions to optimize growth in commercial green house could be viable.     

Early atmospheric detection of carbon dioxide from carbon capture and storage sites

The early atmospheric detection of carbon dioxide (CO₂) leaks from carbon capture and storage (CCS) sites is important both to inform remediation efforts and to build and maintain public support for CCS in mitigating greenhouse gas emissions. A gas analysis system was developed to assess the origin of plumes of air enriched in CO₂, as to whether CO₂ is from a CCS site or from the oxidation of carbon compounds. The system measured CO₂ and O₂ concentrations for different plume samples relative to background air and calculated the gas differential concentration ratio (GDCR = ?ΔO₂/ΔCO₂). The experimental results were in good agreement with theoretical calculations that placed GDCR values for a CO₂ leak at 0.21, compared with GDCR values of 1–1.8 for the combustion of carbon compounds. Although some combustion plume samples deviated in GDCR from theoretical, the very low GDCR values associated with plumes from CO₂ leaks provided confidence that this technology holds promise in providing a tool for the early detection of CO₂ leaks from CCS sites. Implications: This work contributes to the development of a cost-effective technology for the early detection of leaks from sites where CO₂ has been injected into the subsurface to enhance oil recovery or to permanently store the gas as a strategy for mitigating climate change. Such technology will be important in building public confidence regarding the safety and security of carbon capture and storage sites.     

Use of Energy Scenarios in Addressing the CO2 Question

A reference scenario for CO₂ emissions was developed using a model of world energy supply and demand. In the reference scenario, world GNP and world energy demand increase at average rates of 2.1 percent per year and 1.5 percent per year, respectively during the period 1975-2100. The corresponding annual CO₂ emissions rise to a maximum of 16 gigatons of carbon around 2050 and then decline as a result of a transition to nonfossil fuel energy systems. A modified scenario for high CO₂ emissions was obtained by assuming an abundant supply of low cost coal, thus eliminating the transition. A low case was developed in which the low cost of alternative energy (i.e., solar, nuclear) induces an earlier shift away from fossil fuels.

Annual emissions of the three scenarios were used as input to a global carbon cycle model and the CO₂ buildup in the atmosphere during the period 1980-2100 was determined by the model. All three scenarios showed continuous rises in atmospheric CO₂ concentration. The reference scenario reached 775 ppm by 2100. The high CO₂ case resulted in concentrations of over 1040 ppm, and for the low case the 2100 concentration was just under 700 ppm. If the climate theory is correct, even 700 ppm is sufficient to give significant climate warming, but by experiencing the change gradually over a century, adaptation may not be painful. An early transition to nonfossil fuel supplies makes the problem less severe but does not eliminate it.     

A tropical rainforest clearing experiment by biomass burning in the state of Pará, Brazil

Results are described of a forest clearing experiment conducted in Tomé Acu, located approximately 250 km south of Belém, the capital of the Brazilian northern state of Pará. An area of 3 ha of virgin forest was cut in July 1994 and left to dry until October of the same year, when fire was set. Post burning was also performed 30 days after the main fire. The test location biomass content per hectare was measured by indirect methods using formulas with parameters of forest inventories. The carbon content of the several biomass compartments was determined in a CHN analyzer. The combustion completeness was estimated by selecting ten 2+2 m² areas and 24 large trunks and examining their consumption rates by fire. The 2+2 m² areas were used to determine the completeness of small parts of biomass (those whose characteristic diameters were lower than 10 cm) and the trunks to determine the efficiency of the larger parts (characteristic diameters larger than 10 cm). The overall process combustion completeness was estimated to be 20.1%. Considering that the combustion gases of carbon in open fires contain approximately 90% of CO₂ and 10% of CO in volumetric basis, the emission rates of these gases by the burning process were estimated as 70.2 and 5.0 t ha^-1, respectively.