Role of Alternative Electron Acceptors (AEA) to control methane flux from waterlogged paddy fields: Case studies in the southern part of West Bengal, India

The rice fields, depleted of O₂, contain large amount of moisture and organic substrates to provide an ideal anaerobic environment for methanogenesis and are one of the principal anthropogenic sources of methane. In order to mitigate this emission Alternative Electron Acceptors (AEA) were altered in the soil. The experiments were carried out in four seasons at the site of Balarampur, near Baruipur, South 24 Parganas, West Bengal, namely September–December, 2005 (Cultivar: Sundari), February–May, 2006 (Cultivar: Sundari), September–December, 2006 and February–May, 2007 (Cultivar: Swarna-Pankaj). The seasonal average methane flux (Fe treated), for the cultivar type “Sundari” (season: September–December, 2005), is 4.41 t ha⁻¹, as compared to the value of 6.40 t ha⁻¹ for the untreated soil. Similarly for February–May, 2006, the seasonal average methane flux (Fe treated) is 5.52 t ha⁻¹, whereas the untreated flux is 5.69 t ha⁻¹. In the third and fourth seasons we had two treatments with Ammonium Thiosulphate and Ferric Hydroxide. The seasonal average methane flux (treatment: Ammonium Thiosulphate) is 4.35 t ha⁻¹ and 5.41 t ha⁻¹ respectively, whereas for the ferric hydroxide treated soil it is 4.35 t ha⁻¹ and 6.14 t ha⁻¹ respectively. The properties related to the nutrient quality of the harvested paddy seeds supplement these results.     

Composting of vinasse and cotton gin waste by using two different systems

Two composts were obtained by co-composting of a concentrated depotassified beet vinasse and cotton gin waste using two different aeration systems: static aerated pile (forced aeration provided by a blower whom operated in the positive mode) and windrow (turned pile). The composting mixtures were cotton gin trash (55%) and vinasse (45%) (dry weight). In static pile, the total amount of vinasse was added at the beginning of the process whereas, in windrow two additions of vinasse were performed. Differences in temperature changes between both composting systems were found: a faster increase of temperature in the windrow (54 °C at 7 days) than in the static pile (45 °C at 21 days) was observed. Probably in the static pile system, the compaction of the substrates made difficult the correct distribution of the air inside the pile. Moreover, after the second addition of vinasse a new thermophilic phase was started in windrow. The different aeration systems and the way of addition of vinasse could cause differences in organic matter (OM) degradation and in weight (22.6% for the static pile and 26.7% for the windrow) and gas losses during the process. Nevertheless, the composts obtained by the two systems had a high fertilizer value (25.1 g kg⁻¹ N; 3.2 g kg⁻¹ P₂O₅; 21.4 g kg⁻¹ K₂O; C/N8) for compost obtained in static pile and (16.2 g kg⁻¹ N; 3.4 g kg⁻¹ P₂O₅; 16.1 g kg⁻¹ K₂O; C/N 12) for compost obtained in the windrow). A high degree of stability was reached in the final composts. Composting of vinasse with cotton gin waste serves two objectives, disposal of wastes and recycling of waste components.     

Open windrow composting of polymers: an investigation into the rate of degradation of polyethylene

The compostability of degradable polymers under open windrow composting conditions is explored within this paper. Areas for consideration were the use of, and impacts of, degradable polyethylene (PE) sacks on the composting process and the quality of the finished compost product. These factors were investigated through polymer weight loss over the composting process, the amount of polymer residue and chemical contaminants in the finished compost product, the windrow temperature profiles and a bioassay to establish plant growth and germination levels using the final compost product. This trial also included a comparative study of the weight loss under composting conditions of two different types of ‘degradable’ polymer sacks currently on the European market: PE and a starch based product. Statistical analysis of the windrow temperature profiles has led to the development of a model, which can help to predict the expected trends in the temperature profiles of open compost windrows where the organic waste is kerbside collected using a degradable PE sack.     

Environmental inventory modelling of the use of compost and peat in growth media preparation

Compost produced from biological treatment of organic waste has a potential for substituting peat in growth media preparation. The life-cycle-inventories (LCIs) of the two alternatives were compared using LCA-modelling (EASEWASTE) considering a 100-year period and a volumetric substitution ratio of 1:1. For the compost alternative, the composting process, growth media use, and offsetting of mineral fertilizers were considered. For the peat alternative, peatland preparation, excavation, transportation, and growth media use were considered. It was assumed that for compost 14% of the initial carbon was left in the soil after 100 years, while all carbon in peat was mineralized. With respect to greenhouse gas emissions, the former is considered a saving, while the later is considered an emission, because peat in a peatland is considered stored biogenic carbon. The leaching during the growth media use was assessed by means of batch leaching tests involving 4 compost samples and 7 peat samples. The compost leached 3–20 times more heavy metals and other compounds than the peat. The life-cycle-assessment showed that compost performs better regarding global warming (savings in the range of 70–150 kg CO₂-eq. Mg⁻¹) and nutrient enrichment (savings in the range of 1.7–6.8 kg NO₃ Mg⁻¹ compost), while peat performs better in some toxic categories, because of the lower content of heavy metals.     

Natural vs. plantation forests: A case study of land reclamation strategies for the humid tropics

Biomass and productivity were compared in two plantations and in one stand of natural regeneration on similar sites in a premontane moist forest region of Puerto Rico. While initial growth rates of plantation species were higher, after four decades productivity of the natural regeneration plots was equal to or greater than productivity of the plantations. For the first 44 years, aboveground biomass of natural regeneration increased at an average annual rate of 3.8t·ha^–1·yr^–1, but the last year of the study it was 14.7t·ha^–1. Biomass increment of a pine plantation averaged between 8 and 10.5t·ha^–1·yr^–1 except for one year when the rate was much lower, possibly because of hurricane damage. A tropical hardwood plantation averaged close to 4t·ha^–1·yr^–1 for 41 years. It is suggested that in countries where funds for land reclamation are limited, intensive plantations may not always be the best strategy. Natural regeneration or shelterbelt plantations may be suitable alternatives.     

Growth and macronutrient removal of water hyacinth in a small secondary sewage treatment plant

Studies have been made of the growth characteristics of water hyacinth, Eichhornia crassipes (Mart.) Solms, and its ability to remove N, P and K, in a secondary settling pond of a small secondary sewage treatment plant serving both the academic and residential blocks of the Swire Marine Laboratory, University of Hong Kong. The treatment plant consists of, in series, a primary settling tank, a trickling filter compartment and a secondary settling pond from which part of the treated wastewater is recycled to the primary settling tank while the remaining effluent (1 to 2 m³ daily) mixes with and hence is diluted by the outflowing seawater from the aquarium system of the Swire Marine Laboratory before discharge to the sea. Samples of wastewater have been taken regularly from the primary sedimentation pond, the outflow of the trickling filter, the secondary settling pond and the effluent of the treatment plant (before mixing with aquarium outflow) since January, 1992. Physical, chemical and biological characteristics of the samples have been determined and are typical of secondary effluents, with a mean pH of about 7.5, total solids 1200 mg L⁻¹, suspended solids 45 mg L⁻¹, conductivity 2000 μS cm⁻¹, salinity 1 ppt, dissolved oxygen 2 mg L⁻¹, BOD₅ 45 mg L⁻¹, Kjeldahl-N 30 mg L⁻¹, NH₄,-N 25 mg L⁻¹, NO₃-N 4 mg L⁻¹, total P 10 mg L⁻¹, K 35 mg L⁻¹ and total coliforms of less than 10⁵ colonies 100 ml⁻¹.Water hyacinth plants have been stocked in the secondary settling pond as an integral part of the treatment plant so as to improve the quality of, as well as to retrieving and recycling nutrient elements from, the wastewater. The plants are periodically harvested to maintain an active growing crop. The growth rate, standing crop biomass, tissue nutrient composition, nutrient storage and accumulation rate of two growth cycles, one from February 25 to March 18 (mean temperature 17.6°C) and the other from 22 April to 12 May (24.8°C) are reported. The water hyacinth assumed a relatively high standing crop biomass of 10 kg m⁻² (5 to 6 t DM ha⁻¹), and growth rates of 48 and 225 g m⁻² day⁻¹, respectively, for the first and second growth period. Nutrient storage capacities were relatively high, at about 20, 7.5 and 16.5 g m⁻² for N, P and K, respectively. The nutrient composition was very high, reaching 5.42% for N, 1.97 for P, and 4.57 for K. Both the stem and lamina accumulated high levels of N, while the petiole had the highest level of P and K. Apart from nutrient removal, the water hyacinth also helped to decrease the suspended solids, BOD₅ value and total coliforms of the wastewater.It is concluded that water hyacinth improves the quality of wastewater in such small-scale sewage treatment plants and it is recommended that frequent harvests of water hyacinth would increase the treatment efficiency, especially during the active growing season with high temperatures coupled with intense solar radiation.     

Effect of spent engine oil on the growth parameters and chlorophyll content of <Emphasis Type="Italic">Corchorus olitorius</Emphasis> Linn

The effect of spent engine oil on the height, leaf number, leaf area, stem girth, chlorophyll, and moisture contents of Corchorus olitorius grown on 0, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%, 2.0%, and 3.0% (v/w oil/soil) oil-contaminated soil was investigated. The engine oil at all concentrations delayed the germination of C. olitorius by 2 days (compared to control) and there was a general significant reduction in all the growth parameters in plants grown on contaminated soil compared to control plants. The highest leaf area of 26.8 cm² was found in the control plant and least was found in the 0.6% soil (0.11 cm²) after 3 weeks while no values were recorded on the 0.8–3.0% engine-oil-contaminated soil after 5 weeks of experiment. The highest chlorophyll content was also found in the control plant (11.5 mg/l). This showed that spent engine oil has an adverse effect on the growth of C. olitorius plant.     

Environmental impacts of different food waste resource technologies and the effects of energy mix

The environmental impacts of food waste management strategies and the effects of energy mix were evaluated using a life cycle assessment model, EASEWASTE. Three different strategies involving landfill, composting and combined digestion and composting as core technologies were investigated. The results indicate that the landfilling of food waste has an obvious impact on global warming, although the power recovery from landfill gas counteracts some of this. Food waste composting causes serious acidification (68.0 PE) and nutrient enrichment (76.9 PE) because of NH₃ and SO₂ emissions during decomposition. Using compost on farmland, which can marginally reduce global warming (−1.7 PE), acidification (−0.8 PE), and ecotoxicity and human toxicity through fertilizer substitution, also leads to nutrient enrichment as neutralization of emissions from N loss (27.6 PE) and substitution (−12.8 PE). A combined digestion and composting technology lessens the effects of acidification (−12.2 PE), nutrient enrichment (−5.7 PE), and global warming (−7.9 PE) mainly because energy is recovered efficiently, which decreases emissions including SO₂, Hg, NO_x, and fossil CO₂ during normal energy production. The change of energy mix by introducing more clean energy, which has marginal effects on the performance of composting strategy, results in apparently more loading to acidification and nutrient enrichment in the other two strategies. These are mainly because the recovered energy can avoid fewer emissions than before due to the lower background values in power generation. These results provide quantitative evidence for technical selection and pollution control in food waste management.     

Effect of amendment of bauxite processing sand with organic materials on its chemical,physical and microbial properties

The effects of addition of a range of organic amendments (biosolids, spent mushroom compost, green waste compost and green waste-derived biochar), at two rates, on some key chemical, physical and microbial properties of bauxite-processing residue sand were studied in a laboratory incubation study. Levels of exchangeable cations were not greatly affected by additions of amendments but extractable P was increased significantly by mushroom and green waste composts and massively (i.e. from 11.8 to 966 mg P kg^?1) by biosolids applications. Levels of extractable NO₃^?–N were also greatly elevated by biosolids additions and there was a concomitant decrease in pH. Addition of all amendments decreased bulk density and increased mesoporosity, available water holding capacity and water retention at field capacity (?10 kPa), with the higher rate having a greater effect. Addition of biosolids, mushroom compost and green waste compost all increased soluble organic C, microbial biomass C, basal respiration and the activities of β-glucosidase, L-asparaginase and alkali phosphatase enzymes. The germination index of watercress grown in the materials was greatly reduced by biosolids application and this was attributed to the combined effects of a high EC and high concentrations of extractable P and NO₃^?. It was concluded that the increases in water storage and retention and microbial activity induced by additions of the composts is likely to improve the properties of bauxite-processing residue sand as a growth medium but that allowing time for soluble salts, originating from the organic amendments, to leach out may be an important consideration before sowing seeds.     

Conversion of leather wastes to useful products

The main objective of the present study is to investigate the production of useful materials from different kinds of leather waste. Three different types of tannery wastes (chromium- and vegetable-tanned shavings, and buffing dust) were pyrolyzed in a fixed bed reactor at temperatures of 450 and 600 °C under N₂ atmosphere. Gas, oil, ammonium carbonate and carboneous residue were obtained by pyrolysis. The effect of temperature and type of leather waste on product distribution of pyrolysis was investigated. Buffing dust gave the highest yield of oil (ca. 23%), while other wastes recorded yields of ca. 9%. Results of elemental analysis and column chromatography showed that pyrolysis oils could be used as fuel or chemical feedstock after re-treatment. The yields of carboneous residue (chars) were between 37.5% and 48.5% and their calorific value was between 4300 and 6000 kcal kg⁻¹, suitable for use as solid fuel. In addition, these chars were activated by CO₂ to obtain the activated carbon. The activated carbon having highest surface area (799.5 m² g⁻¹) was obtained from chromium-tanned shavings. Activated carbons prepared from chromium-tanned leather were presented as an adsorbant for the adsorption of dyes from aqueous solution.     

Growth and fecundity of earthworms: <Emphasis Type="Italic">Perionyx excavatus</Emphasis> and <Emphasis Type="Italic">Perionyx sansibaricus</Emphasis> in cattle waste solids

Epigeic earthworms (Oligochaeta) have been appeared as key organisms to convert organic waste resources into value-added products, i.e., vermicompost and worm biomass. The assessment of reproduction potential of composting earthworm may be beneficial for large-scale earthworm production. Although, the waste minimizing potential of Perionyx excavatus and Perionyx sansibaricus is well proved, but little information is available about their fecundity rate. In this study, the efforts have been made to explore the growth and reproduction biology of P. excavatus and P. sansibaricus, using cattle waste solid as culture substrate, under laboratory conditions. Earthworms were weighed weekly and number of cocoons produced per week assessed. Biomass productions, fecundity, maturation, natality all were significantly different between P. excavatus and P. sansibaricus. The highest mean individual biomass was 767.7 ± 18.4 mg and 612.6 ± 20.6 mg, respectively in P. sansibaricus and P. excavatus. However, the highest cocoon numbers occurred in P. excavatus (492.3 ± 13.6), significantly higher than P. sansibaricus (269.6 ± 17.1). Fecundity was slightly different in both species: 1.38 ± 0.77 cocoons adult worm⁻¹ week⁻¹ (P. excavatus) and 1.58 ± 0.74 cocoons adult worm⁻¹ week⁻¹ (P. sansibaricus). The hatchling success rate (%) was highest in P. excavatus. Overall natality (juveniles adult⁻¹ week⁻¹) was highest in P. sansibaricus (1.52) than P. excavatus (1.26), which suggests that P. sansibaricus may be a better candidate for rapid propagation of earthworms in cattle waste solid.     

Humic acid formation in artificial soils amended with compost at different stages of organic matter evolution

A composting process was conducted under optimal conditions for 150 d, obtaining three biomasses at different levels of maturity: raw material (RM), fresh compost obtained after 11 d of composting (FC), and evolved compost (EC) obtained after 150 d of composting. During the composting process, HAs were extracted and fully characterized by mass balance, DRIFT, and 1H and 13C-nuclear magnetic resonance spectroscopy. Each compost sample was incubated for 180 d in an artificial soil, after which HA extraction was repeated and characterized. To compare composts containing different amounts of labile organic matter (OM), an equal amount of unhydrolyzable OM was added to the soils. Our results indicated that compost HAs consist of a biologically and chemically stable fraction (i.e., the unhydrolyzable HA [U-HA]) and a labile fraction, whose relative contents depended on the composting duration. Humic acid from more EC contained a higher amount of recalcitrant fraction (aromatic carbon) and a lesser amount of labile fraction (aliphatic carbon) than HA from RM and FC. These results suggest that the humification process during composting preserves the more recalcitrant fraction of the compost-alkali soluble/acid insoluble fraction (HA-fraction). Incubation of composts in soil showed that due to the higher labile fraction content, HAs from raw material were more degraded than those from EC. The abundance of labile carbon of soil amended with less-evolved compost (RM and FC) allowed the more recalcitrant fractions of U-HA to be more preserved than in EC. These results suggest that less-evolved compost could contribute more than well evolved compost to the stable soil OM.     

Effect of synthesis parameters on single gas permeation through T-type zeolite membranes

In this research, nanoporous zeolite T membranes were synthesized at three levels of synthesis temperature: 100, 120 and 140 °C and synthesis time: 15, 30 and 50 h and characterized by gas permeation. Effects of synthesis parameters on CO₂ and CH₄ permeances and CO₂/CH₄ ideal separation factors were studied. All experiments were conducted at 1 bar feed pressure and 30 °C module temperature. Normally, it is anticipated that increasing synthesis temperature and synthesis time increase gas permeances and consequently decrease ideal separation factor. This prediction was not observed in the case of synthesis temperature increase from 100 to 120 °C as well as synthesis time increase from 15 to 30 h, due to the dual effect of increasing synthesis temperature and synthesis time on gas permeances and ideal separation factor. More zeolites are deposited and larger crystals are formed at higher synthesis temperatures and times. Forming the larger crystals accelerates the rate of zeolite layer integration, which is responsible for gas separation, in one hand and reduces the density of deposited zeolite layer on the support, due to the formation of more voids, on the other hand. In terms of maximizing the CO₂/CH₄ ideal separation factor, medium synthesis temperature and synthesis time (120 °C and 30 h) can be selected, however, maximum gas permeances are obtained at low levels of synthesis temperature and time (100 °C and 15 h). According to the ranges of gas permeances (10⁻¹¹ to 10⁻⁶ mol/m² s Pa) and CO₂/CH₄ ideal separation factors (1.4–70.3), it is concluded that the zeolite T membranes synthesized at optimum conditions can be employed for membrane separation of CO₂/CH₄ mixtures.     

Carbon monoxide from composting due to thermal oxidation of biomass

Emissions of carbon monoxide (CO) were observed from decomposing organic wastes and litter under laboratory, pilot composting plant, and natural conditions. Field studies included air from inside a compost heap of about 200 m3, emissions from composting of livestock wastes at a biologically operating farm, and leaf litter pile air samples. The concentration of CO was up to 120 micromol mol(-1) in the compost piles of green waste, and up to 10 micromol mol(-1) in flux chambers above livestock waste windrow composts. The mean CO flux rates were approximately 20 mg CO m(-2) h(-1) for compost heaps of green waste, and varied from 30 to 100 mg CO m(-2) h(-1) for fresh dung windrows. Laboratory studies using a temperature and ventilation-controlled substrate container were performed to elucidate the origin of CO, and included hay samples of fixed moisture content at temperatures between 5 and 65 degrees C, including nonsterilized as well as sterilized samples. The concentration of CO was up to 160 micromol mol(-1) in these experiments, and Arrhenius-type plot analyses resulted in activation energies of 65 kJ mol(-1) for thermochemically produced CO from the nonsterilized compost substrate. Sterilized samples showed dramatically reduced CO2 but virtually unchanged CO emissions, albeit at a slightly lower activation energy, likely a result of the high-temperature sterilization. Though globally and regionally these CO emissions are only a minor source, thermochemically produced CO emissions might affect local air quality in and near composting facilities.     

Convenience improves composting and recycling rates in high-density residential buildings

Increasing volumes of solid waste, implicated in environmental pollution and health problems, are central to the current environmental crisis. In two randomized field experiments, we demonstrate that convenience dramatically boosts recycling and composting rates in multi-family dwellings and university residences. When compost bins were placed on each floor in a multi-family residence, instead of on the ground floor, composting rates increased by 70%, diverting 27 kilograms of compost from the landfill per unit per year. When recycling stations were placed just meters from suites in student residences, instead of in the basement, recycling increased by 147% (container), and 137% (paper), and composting increased by 139%, diverting 23, 22, and 14 kilograms of containers, paper, and compost, respectively, from the landfill per person per year. Simply making recycling and composting convenient can significantly increase waste diversion, and as such this single intervention has important implications for waste management and environmental policy.     

Batch and continuous biosorption of Cu by immobilized biomass of Arthrobacter sp.

The ability of free and polysulphone immobilized biomass of Arthrobacter sp. to remove Cu²⁺ ions from aqueous solution was studied in batch and continuous systems. The Langmuir and Freundlich isotherm models were applied to the data. The Langmuir isotherm model was found to fit the sorption data indicating that sorption was monolayer and uptake capacity (Q^o) was 175.87 and 158.7 mg/g for free and immobilized biomass respectively at pH 5.0 and 30 °C temperature, which was also confirmed by a high correlation coefficient, a low RMSE and a low Chi-square value. A kinetic study was carried out with pseudo-first-order reaction and pseudo-second-order reaction equations and it was found that the Cu²⁺ uptake process followed the pseudo-second-order rate expression. The diffusivity of Cu²⁺ on immobilized beads increased (0.402 × 10⁻⁴ to 0.435 × 10⁻⁴ cm²/s) with increasing concentration from 50 to 150 mg/L. The maximum percentage Cu²⁺ removal (89.56%) and uptake (32.64 mg/g) were found at 3.5 mL/min and 20 cm bed height. In addition to this the Bed Depth Service Time (BDST) model was in good agreement with the experimental data with a high correlation coefficient (>0.995). Furthermore, sorption and desorption studies were also carried out which showed that polysulphone immobilized biomass could be reused for up to six sorption–desorption cycles.     

Application of polyacrylamide to reduce phosphorus losses from a Chinese purple soil: A laboratory and field investigation

Use of anionic polyacrylamide (PAM) to control phosphorus (P) losses from a Chinese purple soil was studied in both a laboratory soil column experiment and a field plot experiment on a steep slope (27%). Treatments in the column study were a control, and PAM mixed uniformly into the soil at rates of 0.02, 0.05, 0.08, 0.10, and 0.20%. We found that PAM had an important inhibitory effect on vertical P transport in the soil columns, with the 0.20% PAM treatment having the greatest significant reduction in leachate soluble P concentrations and losses resulting from nine leaching periods. Field experiments were conducted on 5 m wide by 21 m long natural rainfall plots, that allowed collection of both surface runoff and subsurface drainage water. Wheat was planted and grown on all plots with typical fertilizer applied. Treatments included a control, dry PAM at 3.9 kg ha^?1, dry PAM at 3.9 kg ha^?1 applied together with lime (CaCO₃ at 4.9 t ha^?1), and dry PAM at 3.9 kg ha^?1 applied together with gypsum (CaSO₄·2H₂O at 4 t ha^?1). Results from the field plot experiment in which 5 rainfall events resulted in measurable runoff and leachate showed that all PAM treatments significantly reduced runoff volume and total P losses in surface runoff compared to the control. The PAM treatments also all significantly reduced water volume leached to the tile drain. However, total P losses in the leachate water were not significantly different due to the treatments, perhaps due to the low PAM soil surface application rate and/or high experimental variability. The PAM alone treatment resulted in the greatest wheat growth as indicated by the plant growth indexes of wheat plant height, leaf length, leaf width, grain number per head, and dried grain mass. Growth indexes of the PAM with Calcium treatments were significantly lesser. These results indicate that the selection and use of soil amendments need to be carefully determined based upon the most important management goal at a particular site (runoff/nutrient loss control, enhanced plant growth, or a combination).     

Sewage sludge as organic ameliorant for revegetation of fine bauxite refining residue

The rise in aluminium demand in the world has significantly increased the generation of bauxite residue which occupies huge areas of land worldwide. Direct revegetation of residue storage areas has been unsuccessful because of the high alkalinity and salinity, and poor nutrient contents of the fine residue (red mud). This paper describes glasshouse and field experiments evaluating the potential use of sewage sludge as an organic ameliorant for gypsum amended red mud. The growth of Agropyron elongatum in red mud receiving gypsum (0 and 38.5 t ha⁻¹) and sewage sludge (0, 38.5 and 77 t ha⁻¹) amendment was assessed in a glasshouse study. Leachate and soil analyses revealed that gypsum was effective in reducing the pH, EC and ESP of red mud, while sewage sludge gave additional reductions in EC, Na and ESP. No evidence of any significant increases in heavy metal contents were observed in the leachates following sewage sludge amendment. However, soil Al contents were more available in red mud receiving only sewage sludge treatment. Sewage sludge amendment significantly increased dry weight yield and provided sufficient nutrients for plant growth except K which was marginal. No heavy metal accumulation was observed in Agropyron. Following that, a field experiment was performed having red mud amended with sewage sludge (38.5, 77 and 154 t ha⁻¹) and gypsum (38.5 and 77 t ha⁻¹) to evaluate their effects on soil physical properties of red mud. Sewage sludge significantly reduced soil bulk density (25%) and particle density (9%) and increased the total porosity of red mud (8%). Hydraulic conductivity also increased from 1.5 to 23 × 10⁻⁵ m s⁻¹. Plant cover percentage and dry weight yield of Agropyron increased with an increase in gypsum and sewage sludge amendment. The results confirm that sewage sludge is effective in improving both soil structure and nutrient status of gypsum amended red mud. The use of sewage sludge for red mud revegetation provides not just an option for sludge disposal, but also a cost effective revegetation strategy for bauxite refining industry.     

A cost-effective microbial slurry technology for rapid composting of municipal solid wastes in waste dump sites in India and its feasibility for use in Australia

This short article reports on commercial composting slurry now available in India. The slurry culture containing active decomposer bacteria and enzymes is spread on the surface of the garbage and inside the heaps in windrows constructed at waste dump sites. The microbes produce hydrolysing enzymes to break down the long chain complexes of the organic substrates. About 1 kg of slurry culture in the colloidal emulsion form mixed with 20 litres of water is sprayed on about 3 m of solid waste. For one tonne of waste 200 litres of slurry water are needed. The waste heaps are turned once in 7 to 10 days for proper aeration and the inoculant slurry is sprayed at each turning to enhance decomposition and to maintain the proper moisture level which is usually 45–55 percent. The process is exothermic and the windrows reach a temperature of 70°–75°C within 24–36 hours, killing many harmful pathogens and repelling all birds, stray animals, flies and mosquitos from the dump site. The entire process is completed within 4–6 weeks and as the decomposition is completed the temperature falls to normal. About 40–45 percent of the undecomposed matter is of recyclable materials, and of the rest about 25–30 percent requires safe disposal in adjacent land-fill sites. The problem of emission from tip gases and of leachate and discharge of effluents is greatly reduced. The foul odor of the tip also disappears within 2–3 days of sanitization. The compost produced is rich in sodium, potassium and phosphorous as well as certain trace elements, and contains active nitrogen fixing and phosphate solubulising bacteria.     

Recycling of banana pseudostem waste for economical production of quality banana

Banana pseudostem biomass, traditionally incinerated and wasted, has been conserved and recycled by solid state fermentation (SSF) into plant growth stimulating soil conditioner (SC). This SC alone or combined with biofertilizers showed reduced mortality (10 and 12%) of planted suckers, enhanced chlorophyll contents (593 and 661 μg g⁻¹), gave biomass (35.0 and 36.6 kg) at par and improved yield (54.2 and 55.0 MT ha⁻¹), with that of the control (23%, 312 μg g⁻¹, 36.3 kg and 49.4 MT ha⁻¹, respectively). This has afforded (i) saving of chemical fertilizers by 50%, (ii) reduction in quantum (40%) and frequency (15%) of irrigation and (iii) reduction in cost of electricity and labor without sacrificing quality and quantity of banana. Thus, a voluminous agro-waste is converted into an eco-friendly agro-input for sustainable productivity.