Progress of environmental research in China from 2000 to 2019: Case studies of JES and ES&T

1. Download : Download high-res image (265KB)
2. Download : Download full-size image

     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

Current status of applying microwave-associated catalysis for the degradation of organics in aqueous phase – A review

1. Download high-res image (67KB)
2. Download full-size image

     

Self-feedback LSTM regression model for real-time particle source apportionment

1. Download : Download high-res image (303KB)
2. Download : Download full-size image

     

Wavering between radical and realistic sustainable consumption policies: in search for the best feasible trajectories

In this article radical change in the context of sustainable development is seen as a long-term process in which steady progress in the right direction is regarded as more essential than quick success. The author argues that pressing for swift radical changes bears a serious risk of becoming counter productive, because:

• pressing for rapid change is often wasteful and may prevent the best possible ways of exploitation of innovations;

• rapid change over a wide front of applications and sectors is usually impossible;

• pressing for rapid changes usually encounters strong opposition from interest groups, thereby risking to get bogged down in acceptability discourses.

Transition management, such as for a transition towards sustainable consumption seems often to presuppose the need for radical changes. Even though the embedding function of transition management is a helpful concept and tool for sustainable consumption strategies, the lack or the negligence of the role of objective functions is a disturbing feature of transition management theories. All in all, the need for radical change should emerge as the transition process unfolds. There is no good scientific reason for a priori claims for radical changes as a kind of new dogma.     

Noninvasive prenatal diagnosis in a family at risk for Fraser syndrome

The front cover image is based on the Research Letter Noninvasive prenatal diagnosis in a family at risk for Fraser syndrome by Aldesia Provenzano et al., https://doi.org/10.1002/pd.5700 .

     

Cover Image

The cover image is based on the Original Article Noninvasive prenatal paternity testing by means of SNP-based targeted sequencing by Jacqueline Chor Wing Tam et al., https://doi.org/10.1002/pd.5595 .

     

The theory of inventive problem solving (TRIZ) as option generation tool within cleaner production projects

Cleaner Production is an organized approach to minimize industrial waste and emissions by increasing the efficiency of the use of materials and energy. It is propagated especially by UNIDO and UNEP as an approach to identify preventive measures to cut on waste and emissions from industrial activities. Case studies conducted by the authors in the last 10 years demonstrate, that in a number of cases water consumption per production unit of industries from the surface treatment sector, from food processing and from the textile industry could be reduced by 30–90%, auxiliary materials consumption could be reduced by 30–50%, and energy consumption of processes could be reduced by 15–25%. All these measures were actually economically beneficial for the companies, most of these measures paid back in less than one year [1].The standard approach to apply Cleaner Production originates from chemical engineering. It follows the steps of: Drawing a process flow sheet – collecting input/output data – doing mass and energy balances – identify sources for waste and emissions – set priorities – identify options. In the process of option generation one generally relies on expert knowledge or on checklists which are available in different manuals or in the best available technology reference (BREF) notes.¹ This approach is strong with teams with an (chemical) engineering background.The authors wanted to develop a generic approach for option identification especially for teams with little formal engineering background or teams which have to go beyond their professional experience by using elements of the so-called TRIZ method (Theory of inventive problem solving, or originally Russian: “

” (Teoria reschenija isobretatjelskich sadatsch)). TRIZ offers very strong tools for developing process improvement options on a generic level without specific technological knowledge about the process which shall be improved. The authors have found from their research that especially the concept of the Ideal Final Result, and the Laws of Evolution form a conceptual framework which can aid effectively in the identification of improvement options in a systematic way.     

Carbamazepine degradation by heterogeneous activation of peroxymonosulfate with lanthanum cobaltite perovskite: Performance, mechanism and toxicity

The widely used carbamazepine(CBZ) is one of the most persistent pharmaceuticals and suffers insufficient removal efficiency by conventional wastewater treatment.A synthesized Co-based perovskite(LaCoO_3) was used to activate peroxymonosulfate(PMS) in order to degrade CBZ.Results showed that LaCoO_3 exhibited an excellent performance in PMS activation and CBZ degradation at neutral pH,with low cobalt leaching.The results of FT-IR and XPS verified the high structurally and chemically stability of LaCoO_3 in PMS activation.Electron spin resonance(ESR) analysis suggested the generation of radical species,such as sulfate radicals(SO_4·~-) and hydroxyl radicals(·OH).Radical quenching experiments further revealed the responsibility of SO_4·~-as the dominant oxidant for CBZ oxidation.Ten products were detected via the oxidation of CBZ,with the olefinic double bond attacked by SO_4·~-as the initial step.Hydroxylation,hydrolysis,cyclization and dehydration were involved along the transformation of CBZ.The toxicity of CBZ solution was significantly reduced after treating by PMS/LaCoO_3.     

Effects on nano zero-valent iron reactivity of interactions between hardness, alkalinity, and natural organic matter in reverse osmosis concentrate

Nanoscale zero-valent iron （NZVI） is considered to have potential to reduce nitrate in the concentrate generated by high pressure membrane processes aimed at water reuse. However, it is necessary to verify the effect of the matrix components in the concentrates on NZVI reactivity. In this study, the influence of hardness, alkalinity, and organic matter on NZVI reactivity was evaluated by the response surface method （RSM）. Hardness （Ca/＋） had a positive effect on NZVI reactivity by accelerating iron corrosion. In contrast, alkalinity （bicarbonate; HCO3） and organic matter （humic acid; HA） had negative effects on NZVI reactivity due to morphological change to carbonate green rust, and to competitive adsorption of HA, respectively. The validity of the statistical prediction model derived from RSM was confirmed by an additional confirmation experiment, and the experimental result was within the 95% confidential interval. Therefore, it can be indicated that the RSM model produced results that were statistically significant.     

Removal of Ni(II) from strongly acidic wastewater by chelating precipitation and recovery of NiO from the precipitates

Strongly acidic wastewater produced in nonferrous metal smelting industries often contains high concentrations of Ni(II), which is a valuable metal. In this study, the precipitation of Ni(II) from strongly acidic wastewater using sodium dimethyldithiocarbamate (DDTC) as the precipitant was evaluated. The effects of various factors on precipitation were investigated, and the precipitation mechanism was also identified. Finally, the nickel in the precipitates was recovered following a pyrometallurgical method. The results show that, under optimised conditions (DDTC:Ni(II) molar ratio = 4:1; temperature = 25 °C), the Ni(II) removal efficiency reached 99.3% after 10 min. In strongly acidic wastewater, the dithiocarbamate group of DDTC can react with Ni(II) to form DDTCNi precipitates. Further recovery experiments revealed that high-purity NiO can be obtained by the calcination of DDTCNi precipitates, with the nickel recovery efficiency reaching 98.2%. The gas released during the calcination process was composed of NO₂, CS₂, H₂O, CO₂, and SO₂. These results provide a basis for an effective Ni(II) recovery method from strongly acidic wastewater.     

Interfacial mechanisms of heterogeneous Fenton reactions catalyzed by iron-based materials: A review

The heterogeneous Fenton reaction can generate highly reactive hydroxyl radicals(·OH)from reactions between recyclable solid catalysts and H_2O_2 at acidic or even circumneutral pH.Hence,it can effectively oxidize refractory organics in water or soils and has become a promising environmentally friendly treatment technology.Due to the complex reaction system,the mechanism behind heterogeneous Fenton reactions remains unresolved but fascinating,and is crucial for understanding Fenton chemistry and the development and application of efficient heterogeneous Fenton technologies.Iron-based materials usually possess high catalytic activity,low cost,negligible toxicity and easy recovery,and are a superior type of heterogeneous Fenton catalysts.Therefore,this article reviews the fundamental but important interfacial mechanisms of heterogeneous Fenton reactions catalyzed by iron-based materials..OH,hydroperoxyl radicals/superoxide anions(HO_2./O_2~-.)and high-valent iron are the three main types of reactive oxygen species(ROS),with different oxidation reactivity and selectivity.Based on the mechanisms of ROS generation,the interfacial mechanisms of heterogeneous Fenton systems can be classified as the homogeneous Fenton mechanism induced by surface-leached iron,the heterogeneous catalysis mechanism,and the heterogeneous reaction-induced homogeneous mechanism.Different heterogeneous Fenton systems catalyzed by characteristic iron-based materials are comprehensively reviewed.Finally,related future research directions are also suggested.     

Naturally Occurring Flavonoids Against Human Norovirus Surrogates

Naturally occurring plant-derived flavonoids are reported to have antibacterial, antiviral, and pharmacological activities. The objectives of this study were to determine the antiviral effects of four flavonoids (myricetin, l-epicatechin, tangeretin, and naringenin) on the infectivity of food borne norovirus surrogates after 2 h at 37 °C. The lab-culturable surrogates, feline calicivirus (FCV-F9) at titers of ~7 log₁₀ PFU/ml (high titer) or ~5 log₁₀ PFU/ml (low titer) and murine norovirus (MNV-1) at ~5 log₁₀ PFU/ml, were mixed with equal volumes of myricetin, l-epicatechin, tangeretin, or naringenin at concentrations of 0.5 or 1 mM, and incubated for 2 h at 37 °C. Treatments of viruses were neutralized in cell culture medium containing 10 % heat-inactivated fetal bovine serum, serially diluted, and plaque assayed. Each treatment was replicated thrice and assayed in duplicate. FCV-F9 (low titer) was not found to be reduced by tangeretin or naringenin, but was reduced to undetectable levels by myricetin at both concentrations. Low titer FCV-F9 was also decreased by 1.40 log₁₀ PFU/ml with l-epicatechin at 0.5 mM. FCV-F9 at high titers was decreased by 3.17 and 0.72 log₁₀ PFU/ml with myricetin and l-epicatechin at 0.5 mM, and 1.73 log₁₀ PFU/ml with myricetin at 0.25 mM, respectively. However, MNV-1 showed no significant inactivation by the four tested treatments. The antiviral effects of the tested flavonoids are dependent on the virus type, titer, and dose. Further research will focus on understanding the antiviral mechanism of myricetin and l-epicatechin.     

Assessing the effects of surface-bound humic acid on the phototoxicity of anatase and rutile TiO2 nanoparticles in vitro

In this study,the cytotoxicity of two different crystal phases of TiO₂ nanoparticles,with surface modification by humic acid（HA）,to Escherichia coli,was assessed.The physicochemical properties of TiO₂ nanoparticles were thoroughly characterized.Three different initial concentrations,namely 50,100,and 200 ppm,of HA were used for synthesis of HA coated TiO₂ nanoparticles（denoted as A/RHA50,A/RHA100,and A/RHA200,respectively）.Results indicate that rutile（LC50（concentration that causes 50%mortality compared the control group）=6.5）was more toxic than anatase（LC₅0=278.8）under simulated sunlight（SSL）irradiation,possibly due to an extremely narrow band gap.It is noted that HA coating increased the toxicity of anatase,but decreased that of rutile.Additionally,AHA50 and RHA50had the biggest differences compared to uncoated anatase and rutile with LC₅0of 201.9 and21.6,respectively.We then investigated the formation of reactive oxygen species（ROS）by TiO₂ nanoparticles in terms of hydroxyl radicals（OH）and superoxide anions（O₂^-）.Data suggested that O₂^- was the main ROS that accounted for the higher toxicity of rutile upon SSL irradiation.We also observed that HA coating decreased the generation of OH and O₂^- on rutile,but increased O₂^- formation on anatase.Results from TEM analysis also indicated that HA coated rutile tended to be attached to the surface of E.coli more than anatase.     

Subfossil markers of climate change during the Roman Warm Period of the late Holocene

Abundant bog oak trunks occur in alluvial deposits of the Raba River in the village of Targowisko (southern Poland). Several of them contain galleries of the great capricorn beetle (Cerambyx cerdo L.). A well-preserved subfossil larva and pupa, as well as adults of this species, are concealed in some of the galleries. These galleries co-occur with boring galleries of other insects such as ship-timber beetles (Lymexylidae) and metallic wood borers (Buprestidae). A dry larva of a stag beetle (Lucanidae) and a mite (Acari) have been found in the C. cerdo galleries. Selected samples of the trunks and a sample of the C. cerdo larva were dated, using radiocarbon and dendrochronological methods, to the period from 45 bc to ad 554; one sample was dated to the period from 799 to 700 bc. Accumulation of the channel alluvia containing the bog oak trunks is synchronous with the Roman Warm Period (late antiquity/Early Mediaeval times). The most recent part of this period correlates with massive accumulations of fallen oak trunks noted from various river valleys in the Carpathian region and dated to ad 450–570. The results indicate that C. cerdo was more abundant within the study area during the Roman Warm Period than it is today.     

Late Devonian (Frasnian) phyllopod and phyllocarid crustacean shields from Belgium reinterpreted as ammonoid anaptychi

The taxonomic affinities of fossils from the Frasnian succession of Belgium previously described as phyllopod and phyllocarid crustacean shields are discussed. The rediscovery of the holotype of Ellipsocaris dewalquei, the type species of the genus Ellipsocaris Woodward in Dewalque, 1882, allows to end the discussion on the taxonomic assignation of the genus Ellipsocaris. It is removed from the phyllopod crustaceans as interpreted originally and considered here as an ammonoid anaptychus. Furthermore, it is considered to be a junior synonym of the genus Sidetes Giebel, 1847. Similarly, Van Straelen’s (1933) lower to middle Frasnian record Spathiocaris chagrinensis Ruedemann, 1916, is also an ammonoid anaptychus. Although ammonoids can be relatively frequent in some Frasnian horizons of Belgium, anaptychi remain particularly scarce and the attribution to the present material to peculiar ammonoid species is not possible.     

Monodisperse amino-modified nanosized zero-valent iron for selective and recyclable removal of TNT: Synthesis, characterization, and removal mechanism

Nitroaromatic explosives are major pollutants produced during wars that cause serious environmental and health problems. The removal of a typical nitroaromatic explosive, 2,4,6-trinitrotoluene (TNT), from aqueous solution, was conducted using a new recyclable magnetic nano-adsorbent ([email protected]₂NH₂). This adsorbent was prepared by grafting amino groups onto [email protected]₂ particles with a well-defined core-shell structure and demonstrated monodispersity in solution. The removal performance of the nano-adsorbent towards TNT was found to be 2.57 and 4.92 times higher than that towards two analogous explosives, 2,4-dinitrotoluene (2,4-DNT) and 2-nitrotoluene (2-NT), respectively, under neutral conditions. The difference in the removal performance among the three compounds was further compared in terms of the effects of different conditions (pH value, ionic strength, humic acid concentration, adsorbent modification degree and dosage, etc.) and the electrostatic potential distributions of the three compounds. The most significant elevation is owing to modification of amino on [email protected]₂ which made a 20.7% increase in adsorption efficiency of TNT. The experimental data were well fit by the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model, indicating multilayer adsorption on a heterogeneous surface. The experimental results and theoretical considerations show that the interactions between [email protected]₂NH₂ NPs and TNT correspond to dipole-dipole and hydrophobic interactions. These interactions should be considered in the design of an adsorbent. Furthermore, the adaptability to aqueous environment and excellent regeneration capacity of [email protected]₂NH₂ NPs makes these remediation materials promising for applications.