Kinetics of simazine advanced oxidation in water

Abstract

Comparison of the effects and kinetics of UV photolysis and four advanced oxidation systems (ozone, ozone/hydrogen peroxide, ozone/UV radiation and UV radiation/hydrogen peroxide) for the removal of simazine from water has been investigated. At the conditions applied, the order of reactivity was ozone < ozone/hydrogen peroxide < UV radiation < ozone/UV radiation and UV radiation/hydrogen peroxide. Rate constants of the reactions between ozone and simazine and hydroxyl radical and simazine were found to be 8.7 M^‐1s^‐1 and 2.1x10⁹ M^‐1s^‐1, respectively. Also, a quantum yield of 0.06 mol.photon^‐1 was found for simazine at 254 nm UV radiation. The high value of the quantum yield corroborated the importance of the direct photolysis process. Percentage contributions of direct reaction with ozone, reaction with hydroxyl radicals and direct photolysis were also quantified.     

Hydroxyl (OH) radical production rates in snowpacks from photolysis of hydrogen peroxide (H2O2) and nitrate (NO3−)

Atmospheric chemistry directly above snowpacks is strongly influenced by ultraviolet (UV) radiation initiated emissions of chemicals from the snowpack. The emission of gases from the snowpack to the atmosphere is in part due to chemical reactions between hydroxyl radical, OH (produced from photolysis of hydrogen peroxide (H₂O₂) or nitrate (NO₃⁻)) and impurities in the snowpack. The work presented here is a radiative-transfer modelling study to calculate the depth-integrated production rates of hydroxyl radical from the photolysis of hydrogen peroxide and nitrate anion in snow for four different snowpacks and for solar zenith angles 30°–90°. This work also demonstrates the importance of hydrogen peroxide photolysis to produce hydroxyl radical relative to nitrate photolysis with (a) different snowpacks, (b) different ozone column depths, and (c) snowpack depths. The importance of hydrogen peroxide photolysis over nitrate photolysis for hydroxyl radical production increases with increasing depth in snowpack, column ozone depth, and solar zenith angle. With a solar zenith angle of 60° the production of hydroxyl radical from hydrogen peroxide photolysis accounts for 91–99% of all hydroxyl radical production from hydrogen peroxide and nitrate photolysis.     

Decomposition of gas-phase trichloroethene by the UV/TiO2 process in the presence of ozone.

The decomposition of gas-phase trichloroethene (TCE) in air streams by direct photolysis, the UV/TiO2 and UV/O3 processes was studied. The experiments were carried out under various UV light intensities and wavelengths, ozone dosages, and initial concentrations of TCE to investigate and compare the removal efficiency of the pollutant. For UV/TiO2 process, the individual contribution to the decomposition of TCE by direct photolysis and hydroxyl radicals destruction was differentiated to discuss the quantum efficiency with 254 and 365 nm UV lamps. The removal of gaseous TCE was found to reduce by UV/TiO2 process in the presence of ozone possibly because of the ozone molecules could scavenge hydroxyl radicals produced from the excitation of TiO2 by UV radiation to inhibit the decomposition of TCE. A photoreactor design equation for the decomposition of gaseous TCE by the UV/TiO2 process in air streams was developed by combining the continuity equation of the pollutant and the surface catalysis reaction rate expression. By the proposed design scheme, the temporal distribution of TCE at various operation conditions by the UV/TiO2 process can be well modeled.     

Oxidation of MCPA and 2,4-D by UV radiation, ozone, and the combinations UV/H2O2 and O3/H2O2

The phenoxyalkyl acid derivative herbicides MCPA (4-chloro 2-methylphenoxyacetic acid) and 2,4-D (2,4-dichlorophenoxyacetic acid) were oxidized in ultrapure water by means of a monochromatic UV irradiation and by ozone, as well as by the combinations UV/H2O2 and O3/H2O2. In the direct photolysis of MCPA, the quantum yield at 20 degrees C was directly evaluated and a value of 0.150 mol Eins(-1) was obtained in the pH range 5-9, while a lower value of 0.41 x 10(-2) mol Eins(-1) was determined at pH=3. Similarly, for 2,4-D a value of 0.81 x 10(-2) mol Eins(-1) was deduced, independent of the pH of work. The influence of the additional presence of hydrogen peroxide was established in the combined process UV/H2O2, and the specific contribution of the radical pathway to the global photo-degradation was evaluated. The oxidation by ozone and by the combination O3/H2O2 was also studied, with the determination of the rate constants for the reactions of both herbicides with ozone and hydroxyl radicals at 20 degrees C. These rate constants for the direct reactions with ozone were 47.7 and 21.9 M(-1) s(-1) for MCPA and 2,4-D respectively, while the found values for the rate constants corresponding to the radical reactions were 6.6 x 10(9) and 5.1 x 10(9) M(-1) s(-1).     

Atrazine removal by ozonation processes in surface waters

Abstract

Atrazine (6‐chloro‐N‐ethyl‐N'‐isopropyl‐1,3,5‐triazinedyl‐2,4‐diamine) was treated with ozone alone and in combination with hydrogen peroxide or UV radiation in three surface waters. Experiments were carried out in two bubble reactors operated continously. Variables investigated were the ozone partial pressure, temperature, pH, mass flow ratio of oxidants fed: hydrogen peroxide and ozone and the type of oxidation including UV radiation alone. Residence time for the aqueous phase was kept at 10 min. Concentrations of some intermediates, including deethylatrazine, deisopropylatrazine and deethyldeisopropylatrazine, were also followed. The nature of water, specifically the alkalinity and pH were found to be important variables that affected atrazine (ATZ) removal. Surface waters with low alkalinity and high pH allowed the highest removal of ATZ to be reached. There was an optimum hydrogen peroxide to ozone mass flow ratio that resulted in the highest ATZ removal in each surface water treated. This optimum was above the theoretical stoichiometry of the process. Therefore, to reach the maximum removal of ATZ in a O₃/H₂O₂ process, more hydrogen peroxide was needed in the surface waters treated than in ultrapure water under similar experimental conditions. In some cases, UV radiation alone resulted in the removal of ATZ higher than ozonation alone. This was likely due to the alkalinity of the surface water. Ozonation and UV radiation processes yield different amounts of hydrogen peroxide. Combined ozonations (O₃/H₂O₂ and O₃/UV) lead to ATZ removals higher than single ozonation or UV radiation but the formation of intermediates was higher.     

Atrazine removal by ozonation processes in surface waters

Atrazine (6-chloro-N-ethyl-N'-isopropyl-1,3,5-triazinedyl-2,4-diamine) was treated with ozone alone and in combination with hydrogen peroxide or UV radiation in three surface waters. Experiments were carried out in two bubble reactors operated continuously. Variables investigated were the ozone partial pressure, temperature, pH, mass flow ratio of oxidants fed: hydrogen peroxide and ozone and the type of oxidation including UV radiation alone. Residence time for the aqueous phase was kept at 10 min. Concentrations of some intermediates, including deethylatrazine, deisopropylatrazine and deethyldeisopropylatrazine, were also followed. The nature of water, specifically the alkalinity and pH were found to be important variables that affected atrazine (ATZ) removal. Surface waters with low alkalinity and high pH allowed the highest removal of ATZ to be reached. There was an optimum hydrogen peroxide to ozone mass flow ratio that resulted in the highest ATZ removal in each surface water treated. This optimum was above the theoretical stoichiometry of the process. Therefore, to reach the maximum removal of ATZ in a O3/H2O2 process, more hydrogen peroxide was needed in the surface waters treated than in ultrapure water under similar experimental conditions. In some cases, UV radiation alone resulted in the removal of ATZ higher than ozonation alone. This was likely due to the alkalinity of the surface water. Ozonation and UV radiation processes yield different amounts of hydrogen peroxide. Combined ozonations (O3/H2O2 and O3/UV) lead to ATZ removals higher than single ozonation or UV radiation but the formation of intermediates was higher.     

Modeling the quantum yields of herbicide 2,4-D decay in UV/H2O2 process

The photodecay of herbicide 2,4-D in a hydrogen peroxide-aided photolysis process was studied and modeled. The decay rate of 2,4-D was known to be low in the natural environment, but rate improvement was achieved in an H2O2/UV system. The 2,4-D decay quantum yields under ultraviolet (UV) light at 253.7 nm increased from 4.86 x 10(-6) to 1.30 x 10(-4) as the ratio of [H2O2]/[2,4-D] increased from 0.05 to 12.5. Apparently, in the presence of UV light, the decay rate of 2,4-D could be greatly improved as the concentration of hydrogen peroxide increased. However, the efficiency of 2,4-D photodecay was retarded if the concentration of H2O2 was overdosed, because the excess hydrogen peroxide consumes the hydroxyl radicals (HO*) in the solution, resulting in a much weaker oxidant HO2*. The decay of 2,4-D was also pH dependent. A ranking of acid (highest), base (middle) and neutral (lowest) was observed owing to the property change of reactants and the shifting of dominant mechanisms among photolysis, photohydrolysis and chemical oxidation. Two mathematical models were proposed to predict the quantum yield for various [H2O2]/[2,4-D] ratios and initial pH levels, in which very good correlation was found for the ranges of regular application.     

Photo-Fenton-assisted ozonation of p-Coumaric acid in aqueous solution

The degradation of p-Coumaric acid present in olive oil mill wastewater was investigated as a pretreatment stage to obtain more easily biodegradable molecules, with lower toxicity that facilitates subsequent anaerobic digestion. Thus, photo-Fenton-assisted ozonation has been studied and compared with ozonation at alkaline pH and conventional single ultraviolet (UV) and acid ozonation treatments. In the combined process, the overall kinetic rate constant was split into various components: direct oxidation by UV light, direct oxidation by ozone and oxidation by hydroxyl radicals. Molecular and/or radical ozone reaction was studied by conducting the reaction in the presence and absence of tert-butylalcohol at pHs 2, 7 and 9. Ozone oxidation rate increases with pH or by the addition of Fenton reagent and/or UV radiation due to generation of hydroxyl radicals, *OH. Hydrogen peroxide and ferrous ion play a double role during oxidation since at low concentrations they act as initiators of hydroxyl radicals but at high concentrations they act as radical scavengers. Finally, the additional levels of degradation by formation of hydroxyl radicals have been quantified in comparison to the conventional single processes and an equation is proposed for the reaction rate as a function of studied operating variables.     

Hydrogen peroxide mediated photodegradation of phenol as studied by a flash photolysis/HPLC technique

The technique of flash photolysis followed by high-performance liquid chromatography has been applied to the study of the photodegradation of phenol (I) in the presence of hydrogen peroxide. Progress of the reaction of I (0.1 mM) in undegassed aqueous solution ([H2O2]/[I] = 200/l) was observed by using multiple flashes (16 J). Analysis after a single flash indicated that catechol and hydroquinone were the primary products of the reaction. The reaction was found to be independent of pH in the range 7.0-9.0, but the yield of degradation decreased at pH > 9.0 and at pH < 7.0. The effects of the hydrogen peroxide concentration and flash energy on the chemical yield of the pollutant degradation, and product formation, were investigated as well. The mechanism of the reaction is discussed. A possibility of the application of flashlamps as powerful sources of the UV irradiation in industrial reactors for wastewater treatment is suggested.     

紫外波长对UV/Cl2高级氧化去除水中有机物的影响

为明确紫外波长对UV/Cl2高级氧化体系的影响,使用中心波长分别为267、275和286 nm的发光二极管LED作为光源,探究Cl2光解动力学、UV/Cl2体系自由基生成、对模式化合物溶液以及天然水、再生水TOC的去除。结果表明：在中性或酸性体系中,267 nm最接近HClO最大吸收波长237 nm,吸光度和量子产率均较大,羟基自由基产生水平较高,有机物去除效果较好;在碱性体系中,286 nm最接近ClO-最大吸收波长292 nm,尽管量子产率较小,但吸光度很大,有机物去除效果较好;由于水杨酸在292 nm附近有较强的竞争吸收,使用UV286去除水杨酸效果被削弱。应用UV/Cl2技术选择波长时需要考虑吸光度、量子产率、竞争吸收等因素;对于弱碱性天然水或再生水,采用波长为292 nm的紫外光一般可获得较优处理效果。     

The role of organic ligands in ferrous-induced photochemical degradation of 2,4-dichlorophenoxyacetic acid

Recent studies have shown that hydrogen peroxide is generated in a ferrioxalate-induced photoreductive reaction, but information about the effect of organic ligands on the photochemical behaviour of ferrous species is limited. The degradation of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) by a ferrous-catalyzed oxidation in the presence of various ligands such as formate, citrate, malelate, oxalate, and ethylenediaminetetra-acetic acid (EDTA) was studied. The experiments were conducted under either dark or irradiated (350n m) conditions. Forty-two percent and 34% of 2,4-D were removed by the Fe(2+)/oxalate/UV and Fe(2+)/citrate/UV processes, respectively, after 30 min of reaction and oxidative intermediates were obtained in both cases. The presence of hydroxylated intermediates suggests that 2,4-D may be attacked by hydroxyl radicals, which are the products of the photo-Fenton-like reaction. As such, hydrogen peroxide was produced by the photolysis of ferrous oxalate or ferrous citrate, referred to hereafter as photogenerated H(2)O(2). As expected, the total removal percentage of 2,4-D jumped to 97% when 1mM of hydrogen peroxide (so-called spiked H(2)O(2)) was externally added to the reaction vessel to initiate the Fe(2+)/oxalate/UV process. Therefore, the treatment of 2,4-D by the Fe(2+)/oxalate/H(2)O(2)/UV system can be operated in two steps: the photolysis of ferrous oxalate first, followed by adding the spiked H(2)O(2) sometime after the commencement of the reaction. A two-phase model has been developed to describe this tandem ferrous-catalyzed photooxidation, which would help to achieve the mineralization of 2,4-D.     

SIMAZINE REMOVAL FROM WATER IN A CONTINUOUS BUBBLE COLUMN BY O3 AND O3/H2O2

Simazine, [2-chloro, 4,6-bis(ethylamino)-1,3,5-s-triazine], a common herbicide found in surface and ground water has been ozonized in continuous flow mode. Typical operating variables in ozonation processes have been investigated. Thus, the ozone dose fed to the system exerted a positive effect, while the gas flow rate did not influence the efficiency of the process provided ozone mass flow rate was kept constant. Increasing the pH led to a higher extension of the free radical degradation of simazine and, therefore, to a higher efficiency of the process. Also, addition of free radical promoters, i.e. hydrogen peroxide, did result in a significant improvement of the simazine removal rate. A first approach to process economy showed the system ozone/hydrogen peroxide as the most advantageous in terms of electrical energy requirements.     

Simazine removal from water in a continuous bubble column by O3 and O3/H2O2.

Simazine, [2-chloro, 4,6-bis(ethylamino)-1,3,5-s-triazine], a common herbicide found in surface and ground water has been ozonized in continuous flow mode. Typical operating variables in ozonation processes have been investigated. Thus, the ozone dose fed to the system exerted a positive effect, while the gas flow rate did not influence the efficiency of the process provided ozone mass flow rate was kept constant. Increasing the pH led to a higher extension of the free radical degradation of simazine and, therefore, to a higher efficiency of the process. Also, addition of free radical promoters, i.e. hydrogen peroxide, did result in a significant improvement of the simazine removal rate. A first approach to process economy showed the system ozone/hydrogen peroxide as the most advantageous in terms of electrical energy requirements.     

The importance of atmospheric ozone and hydrogen peroxide in oxidising sulphur dioxide in cloud and rainwater

The process by which sulphur dioxide is oxidised in atmospheric droplets has been studied in laboratory experiments designed to collect a large amount of chemical data pertinent to the atmospheric situation. Thus the oxidation of sodium sulphite solutions by oxygen, ozone and hydrogen peroxide has been studied at different pH's and temperatures. In all cases the reaction is first order with respect to sulphite ion but the order with respect to oxidant differs. For oxygen the order is zero whereas the order for ozone and hydrogen peroxide is one. Varying the hydrogen ion concentration has little effect on the oxygen reaction rate between pH 6 and 9; the ozone reaction rate is inversely proportional to the square root of the hydrogen ion concentration and the hydrogen peroxide rate is almost directly proportional to the hydrogen ion concentration. These last two observations are very important since in the case of ozone it indicates that the reaction proceeds via a free radical mechanism involving hydroxyl radicals and in the case of hydrogen peroxide it is the only oxidation process of sodium sulphite so far investigated that shows a positive response to the presence of hydrogen ions.The experimental data was used to calculate the rate of sulphate formation in water droplets under atmospheric conditions for each of the three oxidants. If it is assumed that the ozone and hydrogen peroxide gas phase concentrations are initially 50 parts in 10⁹ and 1 part in 10⁹ by volume respectively, then the rates of sulphate formation are equal in cloud water at pH 5.8. Above this pH the ozone reaction is faster and below it the hydrogen peroxide reaction is faster due to the positive catalysis by hydrogen ions; the oxygen rate is unimportant by comparison at all pH's below 7. The rate of hydrogen peroxide reaction is such that substantial amounts of sulphate can still be formed rapidly in water droplets at pH values from 3 to 5, and thus this process will be very important in creating acidity in rainwater.     

The importance of atmospheric ozone and hydrogen peroxide in oxidising sulphur dioxide in cloud and rainwater

The process by which sulphur dioxide is oxidised in atmospheric droplets has been studied in laboratory experiments designed to collect a large amount of chemical data pertinent to the atmospheric situation. Thus the oxidation of sodium sulphite solutions by oxygen, ozone and hydrogen peroxide has been studied at different pH's and temperatures. In all cases the reaction is first order with respect to sulphite ion but the order with respect to oxidant differs. For oxygen the order is zero whereas the order for ozone and hydrogen peroxide is one. Varying the hydrogen ion concentration has little effect on the oxygen reaction rate between pH 6 and 9; the ozone reaction rate is inversely proportional to the square root of the hydrogen ion concentration and the hydrogen peroxide rate is almost directly proportional to the hydrogen ion concentration. These last two observations are very important since in the case of ozone it indicates that the reaction proceeds via a free radical mechanism involving hydroxyl radicals and in the case of hydrogen peroxide it is the only oxidation process of sodium sulphite so far investigated that shows a positive response to the presence of hydrogen ions.The experimental data was used to calculate the rate of sulphate formation in water droplets under atmospheric conditions for each of the three oxidants. If it is assumed that the ozone and hydrogen peroxide gas phase concentrations are initially 50 parts in 10⁹ and 1 part in 10⁹ by volume respectively, then the rates of sulphate formation are equal in cloud water at pH 5.8. Above this pH the ozone reaction is faster and below it the hydrogen peroxide reaction is faster due to the positive catalysis by hydrogen ions; the oxygen rate is unimportant by comparison at all pH's below 7. The rate of hydrogen peroxide reaction is such that substantial amounts of sulphate can still be formed rapidly in water droplets at pH values from 3 to 5, and thus this process will be very important in creating acidity in rainwater.     

Removal of selected endocrine disrupting chemicals and personal care products in surface waters and secondary wastewater by ozonation

This study investigated the removal of parabens, N,N-diethyl-m-toluamide (DEET), and phthalates by ozonation. The second-order rate constants for the reaction between selected compounds with ozone at pH 7 were of (2.2 +/-0.2) X 10(6) to (2.9 +/-0.3) X 10(6) M 1/s for parabens, (2.1+/- 0.3) to (3.9 +/-0.5) M-1/s for phthalates, and (5.2 +/-0.3) M-1/s for DEET. The rate constants for the reaction between selected compounds with hydroxyl radical ranged from (2.49 +/-0.06) x 10(9) to (8.5 +/-0.2) x 10(9) M-1/s. Ozonation of selected compounds in secondary wastewater and surface waters revealed that ozone dose of 1 and 3 mg/L yielded greater than 99% depletion of parabens and greater than 92% DEET and phthalates, respectively. In addition, parabens were found to transform almost exclusively through the reaction with ozone, while DEET and phthalates were transformed almost entirely by hydroxyl radicals (.OH).     

水体中酮硝基麝香的臭氧氧化降解研究

采用臭氧氧化水体中的酮硝基麝香,考察pH、H2O2等因素对降解程度的影响,结果表明提高初始pH能加快酮硝基麝香的氧化降解,当pH为12时,反应时间1 h,酮硝基麝香几乎完全去除,浓度为2 mol/L和5 mol/L的H2O2存在有利于O3分解生成·OH自由基,使得酮硝基麝香的氧化降解速率加快,当H2O2浓度超过5 mol/L,H2O2会成为·OH的清除剂,降低·OH利用率;无论O3单独作用和O3/H2O2协同作用,酮硝基麝香降解符合准一级动力学规律;酮硝基麝香氧化降解产物包括甲酸、二乙酸和硝酸根等,其中硝基从苯环上脱落降低了硝基麝香对环境的风险.     

Homogenous catalyzed ozonation of simazine. Effect of Mn(II) and Fe(II).

Simazine, [2-chloro, 4,6-bis(ethylamino)-1,3,5-s-triazine], a common herbicide typically found in surface and ground water was ozonised by using catalytic amounts of Mn(II) and Fe(II). An optimum value for metal concentration was found in the process. Some inhibition of the simazine degradation rate was observed when these metals were added above the optimum concentration. The pH of the reaction media played a significant role in the simazine oxidation rate. Thus, an increase in simazine conversion was observed when the pH was raised from 5 to 9. However, the catalytic effect of added manganese was negligible at the highest pH used in this study (pH 9). The beneficial influence of Fe(II) was also observed when utilising the combination of ozone and hydrogen peroxide. Contrarily, Mn(II) presented a negative influence on simazine conversion when using this oxidation technology.     

Degradation of the pharmaceutical metronidazole via UV, Fenton and photo-Fenton processes

Degradation rates and removal efficiencies of Metronidazole using UV, UV/H2O2, H2O2/Fe2+, and UV/H2O2/Fe2+ were studied in de-ionized water. The four different oxidation processes were compared for the removal kinetics of the antimicrobial pharmaceutical Metronidazole. It was found that the degradation of Metronidazole by UV and UV/H2O2 exhibited pseudo-first order reaction kinetics. By applying H2O2/Fe2+, and UV/H2O2/Fe2+ the degradation kinetics followed a second order behavior. The quantum yields for direct photolysis, measured at 254 nm and 200-400 nm, were 0.0033 and 0.0080 mol E(-1), respectively. Increasing the concentrations of hydrogen peroxide promoted the oxidation rate by UV/ H2O2. Adding more ferrous ions enhanced the oxidation rate for the H2O2/Fe2+ and UV/H2O2/Fe2+ processes. The major advantages and disadvantages of each process and the complexity of comparing the various advanced oxidation processes on an equal basis are discussed.     

Enhancement of ozone oxidation and its associated processes in the presence of surfactant: degradation of atrazine

In this study, the degradation of atrazine (ATZ) by ozone (O3) oxidation and its associated processes (i.e. UV, UV/O3) in the presence and absence of surfactant was investigated and compared. A non-ionic surfactant, Brij 35, was selected. It was found that the presence of a low concentration of surfactant could improve the removal of ATZ by increasing the dissolution of ozone and the indirect generation of hydroxyl radicals. The saturated ozone level and the reaction rate constants were increased with increasing the concentration of surfactant and then decreased at higher surfactant doses at pH level of 2.5. A similar trend was observed at pH level of 7.0 in the presence of bicarbonate ion, because it is capable of deactivating the hydroxyl radicals generating at higher pH level. However, when the radical reactions become dominant in the ozonation (at pH 7.0 without bicarbonate), the saturated ozone level was higher than that with bicarbonate and the kinetic rate constants were increased first and levelled off with increasing of the dose of surfactant. Through the examining of a proposed unit performance index, the low concentration of surfactant is surely beneficial to the ozonation process. Besides, the direct photolysis and photo-assisted ozonation were compared to the ozonation. A significant enhancement on the decay rate of ATZ was resulted exclusively by adding the surfactant. An enhancement index for quantifying the improvement of the various processes was developed.