生物滤塔处理VOCs挂膜启动方法研究

通过中试规模的生物滤塔的两种填料挂膜方法的试验研究，表明填料接种后可以直接壮入生物滤塔，进行直接通气挂膜，该方法符合生物膜在载体表面的固定机理和形成过程，可在较短的时间内完成系统启示。本文同时论述了影响挂膜的几个因素。     

膜生物反应器处理高氨氮废水

试验采用MBR处理高氨氮废水,重点分析了氨氮、有机物的去除以及膜比通量变化等。结果表明,工艺运行稳定,出水氨氮平均浓度低于3mg/L,MBR能够抵抗有机物冲击负荷,氨氮容积负荷可以达到1.11kgNH3-N/(m3·d)。在整个运行期间膜比通量下降比较缓慢,分析认为是高曝气量、低碳氮比以及自养菌的优势生长起了主要作用。     

生物膜法降解甲苯废气过程的探讨

采用陶粒为填料的生物滤池降解甲苯废气，并对清水试验和生物膜试验的结果进行分析，发现生物膜法降解甲苯这样的挥发性有机物（VOCs)具有良好的效果，已不再是清水试验中单纯的物理吸收过程，而是伴有生化反应的吸收过程，是以气膜控制为主的传质过程。     

改进型膜生物反应器处理洗浴污水的试验研究

在大量试验研究的基础上提出了一种改进型膜生物反应器 (MBR) ,并对其处理洗浴污水的效果进行了试验 ,结果表明 :利用改进型MBR处理洗浴污水出水水质良好 ,COD <40mg/L ,LAS <0 .2mg/L ,符合国家建设部颁布的生活杂用水回用水质标准。     

膜生物反应器投加PAC处理生活污水效能的试验

在一体式MBR系统中投加少量的粉末活性炭，运行效果良好，并且可以很好地降低膜污染。粉末活性炭在形成生物活性炭后，对难降解有机物具有很好的降解能力；NH4^ -N的去除率得到进一步提高，NO3^-的含量升高；但反硝化作用不明显，致使总氮去除率不高；生物活性炭很好地吸附并降解了易引起膜污染的有机物，改变了污泥的性质，对膜组件起到了很好的保护作用。     

淹没复合式膜生物反应器技术

综述了膜生物反应器技术进展并分析,阐述了其优特点,提出了新型的淹没复合式膜生物反应器（SHMBR）以及用于污水处理和回用的工艺,从水处理工艺学,流体力学,水微生物学方面论述了其所具的特点,说明了淹没复合式膜生物反应器是一种高效,低耗,资源化的污水生物反应器,指出了今后需研究的问题。     

膜表面形貌对厌氧膜生物反应器膜污染影响的试验研究

在厌氧膜生物反应器处理高浓度食品废水的试验中,借助原子力显微镜分析了四种表面形貌不同的聚醚砜超滤膜的通量衰减规律.结果表明,超滤膜表面形貌愈粗糙,膜通量的衰减速率愈快,且化学清洗后恢复愈困难.     

膜生物反应器高度净化有机物的特性

分别采用膜生物反应器(MBR)和普通生物反应器(CSTR)对苯胺废水进行处理，结果表明MBR处理效果优于CSTR，处理水苯胺浓度接近动力学极限浓度。测定了两种反应器中微生物的最大比基质利用速率qmax分别为2．084d^-1和1．650d^-1，亲和常数Ks值分别为0．237mg／L和0．309mg／L。间歇试验证明MBR能富集培养基质亲和性高的专一性微生物。这类微生物降解速率不随基质浓度而变化，且能更彻底地降解有机物，适用于微量有机物的高度净化。     

膜生物反应器处理回用生活污水的实验研究

针对当前社会对污染物减排和中水回用的需求,采用一体式膜生物反应器(SMBR)对生活污水进行处理,研究了处理效果和工艺条件.结果表明:SMBR是生活污水处理回用的简单高效的工艺方法,SMBR膜出水COD<20 mg·L-1,BOD5<1 mg·L-1,NH4 -N<1 mg·L-1,出水无悬浮物,可以达到城市杂用水回用标准.同时,SMBR对总氮、总磷具有一定的去除效果,污泥沉降性能良好,污泥指数稳定在78~115,污泥龄可达40-60 d,保证了系统内污泥质量浓度;通过控制合适的气水比25∶1~60∶1、采用间歇出水方式等工艺操作条件可以保持良好的污泥特性并可延缓膜污染,延长膜的使用寿命,提高SMBR对污水处理的效率.     

MBR工艺处理螺旋霉素制药废水过程中抗生素耐药菌与抗性基因的研究

抗生素废水含有大量的抗生素耐药菌(antibiotic resistant bacteria,ARB)与抗性基因(antibiotic resistance genes,ARGs),处理排放后可能增强受纳环境的微生物抗性,因此有必要深入研究抗生素废水处理过程中ARB与ARGs的削减效果及其影响因素。本研究采用膜生物反应器(membrane bioreactor,MBR)工艺处理螺旋霉素制药废水,考察了不同水力停留时间(hydraulic retention time,HRT)对ARB与ARGs削减效果的影响。结果表明,虽然在HRT=30 h时MBR对COD与氨氮的去除率略高于HRT=40 h,但HRT=40 h时,不仅总异养菌与肠球菌的去除效果更佳,出水肠球菌耐药率及携带的抗性基因检出率也更低,而且MBR对废水中erm B、erm F、erm X、mef A、ere A、mph B和转移元件ISCR 1、Tn 916/1545相对丰度的削减效果更好。这表明长HRT更有利于MBR工艺削减螺旋霉素废水的耐药菌与抗性基因。     

Excitation-emission matrix (EEM) fluorescence spectroscopy for characterization of organic matter in membrane bioreactors: Principles,methods and applications

• Principles and methods for fluorescence EEM are systematically outlined. • Fluorophore peak/region/component and energy information can be extracted from EEM. • EEM can fingerprint the physical/chemical/biological properties of DOM in MBRs. • EEM is useful for tracking pollutant transformation and membrane retention/fouling. • Improvements are still needed to overcome limitations for further studies. The membrane bioreactor (MBR) technology is a rising star for wastewater treatment. The pollutant elimination and membrane fouling performances of MBRs are essentially related to the dissolved organic matter (DOM) in the system. Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy, a powerful tool for the rapid and sensitive characterization of DOM, has been extensively applied in MBR studies; however, only a limited portion of the EEM fingerprinting information was utilized. This paper revisits the principles and methods of fluorescence EEM, and reviews the recent progress in applying EEM to characterize DOM in MBR studies. We systematically introduced the information extracted from EEM by considering the fluorescence peak location/intensity, wavelength regional distribution, and spectral deconvolution (giving fluorescent component loadings/scores), and discussed how to use the information to interpret the chemical compositions, physiochemical properties, biological activities, membrane retention/fouling behaviors, and migration/transformation fates of DOM in MBR systems. In addition to conventional EEM indicators, novel fluorescent parameters are summarized for potential use, including quantum yield, Stokes shift, excited energy state, and fluorescence lifetime. The current limitations of EEM-based DOM characterization are also discussed, with possible measures proposed to improve applications in MBR monitoring.     

Significant increase of assimilable organic carbon (AOC) levels in MBR effluents followed by coagulation,ozonation and combined treatments: Implications for biostability control of reclaimed water

• Annual AOCs in MBR effluents were stable with small increase in warmer seasons. • Significant increase in AOC levels of tertiary effluents were observed. • Coagulation in prior to ozonation can reduce AOC formation in tertiary treatment. • ∆UV₂₅₄ and SUVA can be surrogates to predict the AOC changes during ozonation. As water reuse development has increased, biological stability issues associated with reclaimed water have gained attention. This study evaluated assimilable organic carbon (AOC) in effluents from a full-scale membrane biological reactor (MBR) plant and found that they were generally stable over one year (125–216 µg/L), with slight increases in warmer seasons. After additional tertiary treatments, the largest increases in absolute and specific AOCs were detected during ozonation, followed by coagulation-ozonation and coagulation. Moreover, UV₂₅₄ absorbance is known to be an effective surrogate to predict the AOC changes during ozonation. Applying coagulation prior to ozonation of MBR effluents for removal of large molecules was found to reduce the AOC formation compared with ozonation treatment alone. Finally, the results revealed that attention should be paid to seasonal variations in influent and organic fraction changes during treatment to enable sustainable water reuse.     

Engineering application of membrane bioreactor for wastewater treatment in China: Current state and future prospect

China has been the forerunner of large-scale membrane bioreactor （MBR） application. Since the first large-scale MBR （≥ 10 000 m^3·d^-1） was put into operation in 2006, the engineering implementation of MBR in China has attained tremendous development. This paper outlines the commercial application of MBR since 2006 and provides a variety of engineering statistical data, covering the fields of municipal wastewater, industrial wastewater, and polluted surface water treatment. The total treatment capacity of MBRs reached 1× 10^6 m^3·d^-1 in 2010, and has currently exceeded 4.5 × 10^6 m^3·d^-1 with -75% of which pertaining to municipal wastewater treatment. The anaerobic/anoxic/aerobie-MBR and its derivative processes have been the most popular in the large-scale municipal application, with the process features and typical ranges of parameters also presented in this paper. For the treatment of various types of industrial wastewater, the configurations of the MBR-based processes are delineated with representative engineering cases. In view of the significance of the cost issue, statistics of capital and operating costs are also provided, including cost structure and energy composition. With continuous stimulation from the environmental stress, political propulsion, and market demand in China, the total treatment capacity is expected to reach 7.5 × 10^6 m^3·d^-1 by 2015 and a further expansion of the market is foreseeable in the next five years. However, MBR application is facing several challenges, such as the relatively high energy consumption. Judging MBR features and seeking suitable application areas should be of importance for the long-term development of this technology.     

Removal of cadmium(II), lead(II), and chromium(VI) ions from aqueous solution using clay

Removal of cadmium(II), lead(II), and chromium(VI) from aqueous solution using clay, a naturally occurring low-cost adsorbent, under various conditions, such as contact time, initial concentration, temperature, and pH has been investigated. The sorption of these metals follows both Langmuir and Freundlich adsorption isotherms. The magnitude of Langmuir and Freundlich constants at 30°C for cadmium, lead, and chromium indicate good adsorption capacity. The kinetic rate constants (K _ad) indicate that the adsorption follows first order. The thermodynamic parameters: free energy change (ΔG ^o), enthalpy change (ΔH ^o), and entropy change (ΔS ^o) show that adsorption is an endothermic process and that adsorption is favored at high temperature. The results reveal that clay is a good adsorbent for the removal of these metals from wastewater.     

A road-map for energy-neutral wastewater treatment plants of the future based on compact technologies (including MBBR)

In the paper concepts for wastewater treatment of the future are discussed by the use of a) one flow diagram based on established, compact, proven technologies (i.e. nitrification/denitrification for N-removal in the mainstream) and b) one flow diagram based on emerging, compact technologies (i.e. de-ammonification in the main stream).The latter (b) will give an energy-neutral wastewater treatment plant, while this cannot be guaranteed for the first one (a). The example flow diagrams show plant concepts that a) minimize energy consumption by using compact biological and physical/chemical processes combined in an optimal way, for instance by using moving bed biofilm reactor (MBBR) processes for biodegradation and high-rate particle separation processes, and de-ammonification processes for N-removal and b)maximize energy (biogas) production through digestion by using wastewater treatment processes that minimize biodegradation of the sludge (prior to digestion) and pretreatment of the sludge prior to digestion by thermal hydrolysis. The treatment plant of the future should produce a water quality (for instance bathing water quality) that is sufficient for reuse of some kind (toilet flushing, urban use, irrigation etc.). The paper outlines compact water reclamation processes based on ozonation in combination with coagulation as pretreatment before ceramic membrane filtration. In the paper concepts for domestic wastewater treatment plants of the future are discussed by the use of a) one flow diagram based on established, compact, proven technologies (i.e. nitrification/denitrification for N-removal in the mainstream) and b) one flow diagram based on emerging, compact technologies (i.e. de-ammonification in the main stream).The latter (b) will give an energy-neutral wastewater treatment plant, while this cannot be guaranteed for the first one (a). The example flow diagrams show plant concepts that a) minimize energy consumption by using compact biological and physical/chemical processes combined in an optimal way, for instance by using moving bed biofilm reactor (MBBR) processes for biodegradation and high-rate particle separation processes, and de-ammonification processes for N-removal and b)maximize energy (biogas) production through digestion by using wastewater treatment processes that minimize biodegradation of the sludge (prior to digestion) and pretreatment of the sludge prior to digestion by thermal hydrolysis. The treatment plant of the future should produce a water quality (for instance bathing water quality) that is sufficient for reuse of some kind (toilet flushing, urban use, irrigation etc.). The paper outlines compact water reclamation processes based on ozonation in combination with coagulation as pretreatment before ceramic membrane filtration.     

系统评价EM菌液在生活污水处理中的应用效果

采用在生活污水中投加有效微生物群的方法,系统评价了ＥＭ对污水中三类常见污染物去除率的影响。结果表明（１）好氧条件下,ＥＭ显著提高污水ＣＯＤｃｒ去除的适宜加入量为５／１００００－１／１０００,增幅达达１０％;厌氧条件下,ＥＭ对污水ＣＯＤｃｒ的去除没有促进作用。（２）ＥＭ在好氧条件下能显著或极显著提高污水ＮＨ４＾＋－Ｎ的硝化程度,当ＥＭ加量为５／１０００时效效果最好,增幅达３７．６２％,厌氧条件下,当     

Development of pretreatment protocol for DNA extraction from biofilm attached to biologic activated carbon (BAC) granules

The biologic activated carbon (BAC) process is widely used in drinking water treatments. A comprehensive molecular analysis of the microbial community structure provides very helpful data to improve the reactor performance. However, the bottleneck of deoxyribonucleic acid (DNA) extraction from BAC attached biofilm has to be solved since the conventional procedure was unsuccessful due to firm biomass attachment and adsorption capacity of the BAC granules. In this study, five pretreatments were compared, and adding skim milk followed by ultrasonic vibration was proven to be the optimal choice. This protocol was further tested using the vertical BAC samples from the full-scale biofilter of Pinghu Water Plant. The results showed the DNA yielded a range of 40 μg·g^-1 BAC (dry weight) to over 100 μg·g^-1 BAC (dry weight), which were consistent with the biomass distribution. All results suggested that the final protocol could produce qualified genomic DNA as a template from the BAC filter for downstream molecular biology researches.     

Effectiveness of aerobic pretreatment of municipal solid waste for accelerating biogas generation during simulated landfilling

Effect of aerobic pretreatment of MSW on landfill gas generation was investigated. Volatile solid (VS) loss of MSW is an effective and comparable indicator. Chinese MSW requires at least a reduction of VS about 27% (w/w) prior to disposal. Aerobic pretreatment of MSW reduced lag phase more than 90% before methanogenesis. Aerobic pretreatment degree influences quantity of gas generation. This study evaluates the effectiveness of aerobic pretreatment of municipal solid waste (MSW) on reducing lag phase and accelerating biogas generation. Aerobic pretreatment degree (APD) was determined on the basis of reduction in volatile solids (VS) on a wet weight basis. In this study, intermittent aeration (IA) was applied to three reactors as a main aeration mode; since a single reactor was operated under continuous aeration mode. However, the purpose of the experiment was to reduce VS content of waste, irrespective of the comparison between aeration modes. Fresh MSW was first pretreated aerobically with different aeration rates (10, 40, 60 and 85 L/min/m³) for the period of 30–50 days, resulting in VS-loss equivalent to 20%, 27%, 38% and 53% on w/w basis for the wastes A1, A2, A3 and A4, respectively. The cumulative biogas production, calculated based on the modified Gompertz model were 384, 195, 353, 215, and 114 L/kg VS for the wastes A0, A1, A2, A3 and A4, respectively. Untreated waste (A0) showed a long lag phase; whereas the lag phases of pretreated MSW were reduced by more than 90%. Aerobically pretreated wastes reached stable methanogenic phase within 41 days compared to 418 days for untreated waste. The waste mass decreased by about 8% to 27% compared to untreated MSW, indicative that even more MSW could be placed in the same landfill. The study confirmed the effectiveness of aerobic pretreatment of MSW prior to landfilling on reducing lag phase and accelerating biogas generation.     

水体中胺鲜酯残留量的测定及其光解特性

建立了利用固相萃取-气相色谱(SPE-GC)测定水体中胺鲜酯残留量的方法.考查了3种不同固相萃取柱(C18、florisil、OasisR HLB)对水溶性农药胺鲜酯的吸附效果,发现它们对水中胺鲜酯的萃取效率依次为8%、13% 和96%;进一步研究了利用OasisR HLB萃取水中胺鲜酯的最佳条件(洗脱剂二氯甲烷用量4～8 mL),OasisR HLB(60 mg)小柱对胺鲜酯的保留容量高达200 μg·柱-1.运用该方法测定胺鲜酯光解试验样品,结果表明胺鲜酯质量浓度的对数与光照时间呈良好的线性关系.胺鲜酯在氙灯下的光化学降解符合一级动力学反应,光解半衰期为82 min,较易光解.