零价铁与厌氧微生物协同还原地下水中的硝基苯

通过间歇式实验,考察了零价铁与厌氧微生物协同还原地下水中硝基苯的效果。实验结果表明,由零价铁腐蚀为厌氧微生物提供H2电子供体还原硝基苯的效果明显优于零价铁和微生物单独作用,硝基苯去除率分别提高21.8%和57.0%。弱酸性条件有利于协同反应进行,当初始pH为5.0和6.0时,4 d后硝基苯去除率比初始pH为7.0时的提高74.4%和35.2%。增加零价铁投加量可提高协同还原的效果,零价铁最佳投加量为250 mg/L。零价铁腐蚀产生的Fe2+无法作为电子供体被微生物利用,但可作为无机营养元素促进协同过程。由于零价铁产H2速率受表面覆盖物影响不明显,在地下水修复过程中可保证协同效果并延长零价铁的使用寿命。     

Fe-Cu催化还原法处理废水的稳定性分析

采用扫描电镜(SEM)和X射线衍射(XRD)技术对Fe-Cu催化还原法处理硝基苯配水反应前后铁屑和铜的表面进行分析,研究了Fe-Cu催化还原法的长期运行效果.结果表明,运行数周后铜表面性状基本保持不变,化学稳定性好,抗中毒能力强.处理效果的下降主要起因于铁屑表面的金属铁发生反应而被逐渐消耗,以及铁屑表面为沉淀物覆盖而逐渐失效.     

铁屑法处理活性染料废水的实验研究

研究了反应时间、染料浓度、进水pH以及不同的废铸铁屑投加量的条件下，废铸铁屑内电解法处理模拟印染废水的脱色能力。并采用铁屑滤床强化厌氧一好氧膜生物反应器（A／OMBR）处理含活性染料的模拟废水。研究结果表明，铁屑对模拟印染废水的最佳脱色时间为12min，酸性条件下铁屑的脱色率优于碱性条件．随铁屑投加量的增加，系统对印染废水的脱色率提高，铁屑滤床强化A／OMBR处理可以提高组合工艺出水色度和COD的去除率。     

Synthesis of nanoscale zero-valent iron/ordered mesoporous carbon for adsorption and synergistic reduction of nitrobenzene

Nanoscale zero-valent iron (NZVI) supported on ordered mesoporous carbon (OMC) was synthesized through liquid phase reduction route. The NZVI/OMC composite was characterized by X-ray diffraction, N(2) adsorption/desorption and transmission electron microscopy. Results reveal that the composite possesses ordered mesostructure with NZVI distributing homogeneously on the surface of OMC support. The removal effects of nitrobenzene (NB) in water with OMC, NZVI/OMC and non-supported NZVI were evaluated. Results indicate that NZVI/OMC shows enhanced removal efficiency, which is attributed to its adsorption and synergistic reduction for NB. The transformation process of NB was further investigated by HPLC. Nitrosobenzene and phenylhydroxylamine were detected as intermediate products and aniline was the final reductive product.     

Nanoscale zero-valent iron (nZVI): aspects of the core-shell structure and reactions with inorganic species in water

Aspects of the core-shell model of nanoscale zero-valent iron (nZVI) and their environmental implications were examined in this work. The structure and elemental distribution of nZVI were characterized by X-ray energy-dispersive spectroscopy (XEDS) with nanometer-scale spatial resolution in an aberration-corrected scanning transmission electron microscope (STEM). The analysis provides unequivocal evidence of a layered structure of nZVI consisting of a metallic iron core encapsulated by a thin amorphous oxide shell. Three aqueous environmental contaminants, namely Hg(II), Zn(II) and hydrogen sulfide, were studied to probe the reactive properties and the surface chemistry of nZVI. High-resolution X-ray photoelectron spectroscopy (HR-XPS) analysis of the reacted particles indicated that Hg(II) was sequestrated via chemical reduction to elemental mercury. On the other hand, Zn(II) removal was achieved via sorption to the iron oxide shell followed by zinc hydroxide precipitation. Hydrogen sulfide was immobilized on the nZVI surface as disulfide (S(2)(2-)) and monosulfide (S(2-)) species. Their relative abundance in the final products suggests that the retention of hydrogen sulfide occurs via reactions with the oxide shell to form iron sulfide (FeS) and subsequent conversion to iron disulfide (FeS(2)). The results presented herein highlight the multiple reactive pathways permissible with nZVI owing to its two functional constituents. The core-shell structure imparts nZVI with manifold functional properties previously unexamined and grants the material with potentially new applications.     

Quantification and modelling of 2,4-dinitrotoluene reduction with high-purity and cast iron

Cast iron has been used as a reactive material in permeable reactive barriers (PRBs) for site remediation. While reactions are generally believed to occur on the iron (oxide) surface, a recent study by [Oh, S.Y., Cha, D.K., Chiu, P.C., 2002a. Graphite-mediated reduction of 2,4-dinitrotoluene with elemental iron. Environ. Sci. Technol. 36 (10), 2178-2184] showed that graphite inclusions in cast iron can also serve as reaction sites for 2,4-dinitrotoluene (DNT). These authors also found that graphite-mediated reduction of DNT has a regioselectivity that is different from that for iron surface. In this study, we quantified the observations reported by Oh et al. and examined the role of graphite in cast iron through numerical modelling. Models containing one and two reaction sites were developed to evaluate the mass transfer, sorption and reaction rates for DNT reduction in batch systems containing high-purity and cast iron. Our simulations showed that the regioselectivity, defined as the ratio of the ortho- and para-nitro reduction rate constants, was 0.37+/-0.04 S.E. (S.E.=one estimated standard error) for iron surface and 3.59+/-0.76 S.E. for graphite surface. In the cast iron-water system, we estimated that at least 66+/-2% S.E. of the DNT was reduced on graphite surface, despite the low graphite content and the lower DNT reduction rate with graphite than with iron. Graphite played such an important role because of the rapid adsorption of DNT to graphite. In the batch experiments conducted by Oh et al., external mass transfer was not rate limiting. Surface reaction was the rate-limiting step for DNT reduction on the graphite surface in cast iron, whereas internal mass transfer and/or adsorption and surface reaction were important for high-purity iron.     

Preparation of spherical iron nanoclusters in ethanol-water solution for nitrate removal

In this study, a higher surface area spherical nanoscale zero valent iron (HNZVI) cluster (80 nm, 54.25 m(2)g(-1)) was synthesized in ethanol-water mixed solvent in the presence of dispersion agent of polyglycol (PEG). At the same time, a lower surface area nanoscale zero valent iron (LNZVI) particle (80 nm, 8.08 m(2)g(-1)) was also prepared with only de-ioned water as reaction media. Their structures, compositions and physical properties were characterized by transmission electron microscope (TEM), X-ray diffractometer (XRD), inductively coupled plasma atomic emission spectrophotometer (ICP-AES), and Brunauer-Emmett-Teller (BET) surface area analyzer and the results obtained for these two kinds of nanoscale iron were compared with each other and also with those reported in the literatures. The HNZVI clusters seemed to be accumulated by smaller iron particles (<10 nm). At the same time, whiskers were formed in the final produce. Reactivity of the HNZVI was affirmed via denitrification of nitrate. The factors controlling the reduction of nitrate, such as pH, dissolved oxygen (DO), iron content as well as the initial nitrate concentration were also discussed. Finally, kinetic analysis revealed that chemical reduction of nitrate by HNZVI could not be described by the first- or pseudo-first-order kinetic model.     

Catalytic amination and dechlorination of para-nitrochlorobenzene (p-NCB) in water over palladium-iron bimetallic catalyst

Chemical treatment of para-nitrochlorobenzene (p-NCB) by palladium/iron (Pd/Fe) bimetallic particles represents one of the latest innovative technologies for the remediation of contaminated soil and groundwater. The amination and dechlorination reaction is believed to take place predominantly on the surface site of the Pd/Fe catalysts. The p-NCB was first transformed to p-chloroaniline (p-CAN) then quickly reduced to aniline. 100% of p-NCB was removed in 30 min when bimetallic Pd/Fe particles with 0.03% Pd at the Pd/Fe mass concentration of 3g 75 ml(-1) were used. The p-NCB removal efficiency and the subsequent dechlorination rate increased with the increase of bulk loading of palladium and Pd/Fe. As expected, p-NCB removal efficiency increased with temperature as well. In particular, the removal efficiency of p-NCB was measured to be 67%, 79%, 80%, 90% and 100% for reaction temperature 20, 25, 30, 35 and 40 degrees C, respectively. Our results show that no other intermediates were generated besides Cl(-), p-CAN and aniline during the catalytic amination and dechlorination of p-NCB.     

高碱度钢渣添加铁尾矿消解f-CaO的机理研究

高碱度钢渣掺唐山石人沟铁尾矿重构,两者在高温环境下熔融反应消解高碱度钢渣中f-CaO。采用正交实验法设计实验方案,考察了铁尾矿掺入量(分别为3%、5%和9%)、反应温度(分别为1 500℃,1 550℃和1 580℃)及恒温反应时间(分别为10 min、20 min和30 min)对消解高碱度钢渣中f-CaO的效果。实验结果表明,铁尾矿能有效消解钢渣中f-CaO,重构渣中f-CaO含量平均值为1.17%,消解率为76.27%。且由正交方法测出了铁尾矿掺入量对f-CaO的消解影响较大,极差值为0.41%;反应温度次之,极差值为0.32%;恒温反应时间影响较小,极差值为0.06%。利用X射线衍射方法测定重构渣中矿物组成,主要为磁铁矿、钙镁橄榄石、硅酸二钙、硅酸三钙、镁铁尖晶石、铁酸钙及铁铝酸钙。     

Batch-test study on the dechlorination of 1,1,1-trichloroethane in contaminated aquifer material by zero-valent iron

Chlorinated aliphatic hydrocarbons are common groundwater contaminants. One possible remediation option is in-situ reductive dechlorination by zero-valent iron, either by direct injection or as reactive barriers. Chlorinated ethenes (tetrachloroethene: PCE; trichloroethene: TCE) have received extensive attention in this context. However, another common groundwater pollutant, 1,1,1-trichlorethane (TCA), has attracted much less attention. We studied TCA reduction by three types of granular zero-valent irons in a series of batch experiments using polluted groundwater, with and without added aquifer material. Two types of iron were able to reduce TCA completely with no daughter product concentration increases (1,1-dichloroethane: DCA; chloroethane: CA). One type of iron showed slower reduction, with intermediate rise of DCA and CA concentrations. When evaluating the formation of daughter products, the tests on the groundwater alone showed different results than the groundwater plus aquifer batches: DCA did not temporarily accumulate in the batches with added aquifer material, contrary to the batches without added aquifer material. 1,1-dichloroethene (DCE, also present in the groundwater as an abiotic degradation product of TCA) was also reduced slower in the batches without added aquifer material than in the batches with aquifer material. Redox potentials gradually decreased to low values in batches with aquifer material without iron, while the batches with groundwater alone maintained a constant higher redox potential. Either adsorption processes or microbiological activity in the samples could explain these phenomena. Polymerase Chain Reaction (PCR: a targeted gene probe technique) for chlorinated aliphatic compound (CAH)-degrading bacteria confirmed the presence of Dehalococcoides sp. (chloroethene-degraders) but was negative for Desulfobacterium autotrophicum (a known co-metabolic TCA degrader). DCA reduction was rate determining: first-order half-lives of 300-350 h were observed. TCA was fully removed within hours. CA is resistant to reduction by zero-valent iron but it is known to hydrolyze easily. Since CA did not accumulate in our batches, it may have disappeared by the latter mechanism or it may not have formed as a major daughter product.     

The effect of silica on the degradation of organohalides in granular iron columns

Dissolved silica species are naturally occurring, ubiquitous groundwater constituents with corrosion-inhibiting properties. Their influence on the performance and longevity of iron-based permeable reactive barriers for treatment of organohalides was investigated through long-term column studies using Connelly iron as the reactive medium. Addition of dissolved silica (0.5 mM) to the column feed solution led to a reduction in iron reactivity of 65% for trichloroethylene (TCE), 74% for 1,1,2-trichloroethane (1,1,2-TCA), and 93% for 1,1,1-trichloroethane (1,1,1-TCA), compared to columns operated under silica-free conditions. Even though silica adsorption was a gradual process, the inhibitory effect was evident within the first week, with subsequent decreases in reactivity over 288 days being relatively minor. Lower concentrations of dissolved silica species (0.2 mM) led to a lesser decrease (70%) in iron reactivity toward 1,1,1-TCA. The presence of dissolved silica species produced a shift in TCE product distribution toward the more highly chlorinated product cis-dichloroethylene (cis-DCE), although it did not appear to alter products originating from the trichloroethanes. The major corrosion products identified were magnetite (Fe3O4) or maghemite (gamma-Fe2O3) and carbonate green rust ([Fe4(2+)Fe(2)3+(OH)12][CO(3).2H2O]). Iron carbonate hydroxide (Fe(II)1.8Fe(III)0.2(OH)2.2CO3) was only found in the silica-free column, indicating that silica may hinder its formation. A comparison with columns operated under the same conditions, but using Master Builder iron as the reactive matrix, showed that Connelly iron is initially less reactive, but performs better than Master Builder iron over 288 days.     

Responses of a soil bacterium, Pseudomonas chlororaphis O6 to commercial metal oxide nanoparticles compared with responses to metal ions

The toxicity of commercially-available CuO and ZnO nanoparticles (NPs) to pathogenic bacteria was compared for a beneficial rhizosphere isolate, Pseudomonas chlororaphis O6. The NPs aggregated, released ions to different extents under the conditions used for bacterial exposure, and associated with bacterial cell surface. Bacterial surface charge was neutralized by NPs, dependent on pH. The CuO NPs were more toxic than the ZnO NPs. The negative surface charge on colloids of extracellular polymeric substances (EPS) was reduced by Cu ions but not by CuO NPs; the EPS protected cells from CuO NPs-toxicity. CuO NPs-toxicity was eliminated by a Cu ion chelator, suggesting that ion release was involved. Neither NPs released alkaline phosphatase from the cells’ periplasm, indicating minimal outer membrane damage. Accumulation of intracellular reactive oxygen species was correlated with CuO NPs lethality. Environmental deposition of NPs could create niches for ion release, with impacts on susceptible soil microbes.     

Enhanced removal of pentachlorophenol by a novel composite: nanoscale zero valent iron immobilized on organobentonite

Nanoscale zero valent iron (NZVI) was immobilized on the organobentonite (CTMA-bent), so as to enhance the reactivity of NZVI and prevent its aggregation. This novel composite (NZVI/CTMA-Bent) was characterized by transmission electron microscope and X-ray diffraction. Good dispersion of NZVI particles on the bentonite was observed. Its performance on removing pentachlorophenol (PCP) was investigated by batch experiments. Results showed NZVI/CTMA-Bent could rapidly and completely dechlorinate PCP to phenol with an efficiency of 96.2%. It was higher than the sum (54.5%) of reduction by NZVI (31.5%) and adsorption by CTMA-Bent (23.0%) separately. The kinetic studies indicated the removal rate of PCP was positively related to the adsorption. We proposed that the adsorption of PCP by CTMA-Bent enhanced the mass transfer of PCP from aqueous to iron surface. Besides, NZVI/CTMA-Bent exhibited good stability and reusability, and CTMA-Bent could also reduce the amount of iron ions released into the solution.     

Influence of solution composition and column aging on the reduction of nitroaromatic compounds by zero-valent iron

Granular iron is used in reactive permeable barriers for the reductive treatment of organic and inorganic groundwater contaminants. The technology is well established, however, its long-term performance and the importance of the groundwater composition are not yet well understood. Here, the influence of chloride, nitrate, silicate, and Aldrich humic acid on the reactivity of Master Builder iron was studied under anoxic conditions using small packed columns and 2-nitrotoluene (2-NT) as a model contaminant. After initially complete reduction of 2-NT to 2-aminotoluene (2-AT) in the column, possibly under mass-transfer controlled conditions, the reactivity of the iron was found to decrease substantially. In the presence of chloride, this decrease was slowed while exposure to silicate resulted in a very quick loss of iron reactivity. Nitrate was found to interfere strongly with the effect of chloride. These observations are interpreted in terms of corrosion inhibition/promotion and competition. Our results suggest that reactive barrier performance may be strongly affected by the composition of the treated groundwater.     

土壤理化性质对Fe~0还原硝基苯的影响

采用零价铁（Fe0）还原降解土壤中的硝基苯,考察土壤理化性质对还原效果的影响。结果显示,当2 g土壤中NB含量约为2.5×10-6mol/g,铁粉用量为50 mg,土壤含水量为75%时,控温25℃条件下反应1 h,硝基苯在松砂土和中壤土中的还原率分别可达到82.9%和91.1%。硝基苯在2种土壤中的还原率表现出中壤土〉松砂土的规律;土壤微生物和土壤有机质含量升高有利于反应进行;粒径偏小的中壤土中硝基苯还原较彻底。NB在土壤中的老化时间对Fe0还原效果影响较小。     

Integrated evaluation of the performance of a more than seven year old permeable reactive barrier at a site contaminated with chlorinated aliphatic hydrocarbons (CAHs)

An important issue of concern for permeable reactive iron barriers is the long-term efficiency of the barriers due to the long operational periods required. Mineral precipitation resulting from the anaerobic corrosion of the iron filings and bacteria present in the barrier may play an important role in the long-term performance. An integrated study was performed on the Vapokon permeable reactive barrier (PRB) in Denmark by groundwater and iron core sample characterization. The detailed field groundwater sampling carried out from more than 75 well screens up and downstream the barrier showed a very efficient removal (>99%) for the most important CAHs (PCE, TCE and 1,1,1-TCA). However, significant formation of cis-DCE within the PRB resulted in an overall insufficient efficiency for cis-DCE removal. The detailed analysis of the upstream groundwater revealed a very heterogeneous spatial distribution of contaminant loading into the PRB, which resulted in that only about a quarter of the barrier system is treating significant loads of CAHs. Laboratory batch experiments using contaminated groundwater from the site and iron material from the core samples revealed that the aged iron material performed equally well as virgin granular iron of the same type based on determined degradation rates despite that parts of the cored iron material were covered by mineral precipitates (especially iron sulfides, carbonate green rust and aragonite). The PCR analysis performed on the iron core samples indicated the presence of a microbial consortium in the barrier. A wide range of species were identified including sulfate and iron reducing bacteria, together with Dehalococcoides and Desulfuromonas species indicating microbial reductive dehalogenation potential. The microbes had a profound effect on the performance of the barrier, as indicated by significant degradation of dichloromethane (which is typically unaffected by zero valent iron) within the barrier.     

High-level arsenite removal from groundwater by zero-valent iron

The objectives of this study were to conduct batch and column studies to (i) assess the effectiveness of zero-valent iron for arsenic remediation in groundwater, (ii) determine removal mechanisms of arsenic, and (iii) evaluate implications of these processes with regard to the stability of arsenic and long-term remedial performance of the permeable reactive barrier (PRB) technology. A high concentration arsenic solution (50 mg l(-1)) was prepared by using sodium arsenite (arsenic (III)) to simulate groundwater at a heavily contaminated Superfund site in the USA. Batch studies indicate that the removal of arsenic is a two-step reaction with fast initial disappearance of arsenite followed by a slow subsequent removal process. Flow-through columns were conducted at a flow rate of 17 ml h(-1) under reducing conditions for 6.6 mo. Kinetic analysis suggested that arsenic removal behaves as a zero-order reaction at high arsenic concentrations. Arsenic removal rate constants decreased with time and arsenic breakthrough was observed in the column study. Arsenic removal capacity of zero-valent iron was determined to be approximately 7.5 mg As/g Fe. Carbonate green rust was identified from the analysis of surface precipitates; arsenite uptake by green rust may be a major mechanism responsible for arsenic remediation by zero-valent iron. Analysis of HCl-extractable arsenic from iron samples indicated that approximately 28% of arsenic was in the form of arsenate suggesting that a surface oxidation process was involved in the arsenic removal with zero-valent iron.     

Effects of copper and palladium on the reduction of bromate by Fe(0)

Bromate reduction by Fe(0) with incorporation of copper or palladium was investigated in batch tests. The incorporation of copper led to an increase in the rate of bromate reduction, while incorporation of palladium did not show any effect on bromate reduction by Fe(0), regardless of the bimetal application techniques (either simultaneous addition of Cu(II) or Pd(IV) into the Fe-BrO3- reaction system or using copper or palladium amended iron for bromate removal). Surface analyses by X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD) techniques indicated that aqueous Cu(II) was reduced and incorporated into the iron surface to form Cu2O and Cu(0). Among these two species, pure Cu(0) is not an active electron donor to the bromate reduction reaction, as shown by there being no reduction from using Cu(0) powders alone and no enhancement by Fe(0) when physically mixed with Cu(0). Although it has been proposed in the literature that the enhancement of adsorption also contributes to the enhancement of chemical reduction, this is not the case here because adsorption decreased when Cu increased. The enhanced bromate reduction rate in the presence of copper observed here is most likely the result of the newly formed active Cu(I). The presence of PdO was evidenced by XPS but yielded no enhancement in bromate reduction. Finally, the Cu2O present on the iron surface because of copper impurities in commercially available iron was found to be involved in the bromate reduction and to accelerate the reduction rate.     

Predictions of long-term performance of granular iron permeable reactive barriers: field-scale evaluation

Long-term performance is a key consideration for the granular iron permeable reactive barrier (PRB) technology because the economic benefit relies on sustainable operation for substantial periods of time. However, predictions on the long-term performance have been limited mainly because of the lack of reliable modeling tools. This study evaluated the predictive capability of a recently-developed reactive transport model at two field-scale PRBs, both having relatively high concentrations of dissolved carbonate in the native groundwater. The first site, with 8 years of available monitoring data, was a funnel-and-gate installation, with a low groundwater velocity through the gate (about 0.12 m d(-1)). The loss in iron reactivity caused by secondary mineral precipitation was small, maintaining relatively high removal rates for chlorinated organics. The simulated concentrations for most constituents in the groundwater were within the range of the monitoring data. The second site, with monitoring data available for 5 years, was a continuous wall PRB, designed for a groundwater velocity of 0.9 m d(-1). A comparison of measured and simulated aqueous concentrations suggested that the average groundwater velocity through the PRB could be lower than the design value by a factor of two or more. The distribution and amounts of carbonate minerals measured in core samples supported the decreased groundwater velocity used in the simulation. The generally good agreement between the simulated and measured aqueous and solid-phase data suggest that the model could be an effective tool for predicting long-term performance of granular iron PRBs, particularly in groundwater with high concentrations of carbonate.     

New Fe-immobilized natural bentonite plate used as photo-Fenton catalyst for organic pollutant degradation

Novel photo-Fenton catalysts were prepared by immobilizing iron species on commercial bentonite plates via two methods: (1) ion exchange reaction (Fe³⁺ vs. Na⁺) by aqueous suspension powder-clay/FeCl₃ followed by plate preparation, and (2) forced hydrolysis of Fe(NO₃)₃ onto a prefabricated clay plate. The last method led to a more photo-active Fe-oxide/bentonite plate. This material allowed, at a non-adjusted initial pH of 5.5 and in the presence of H₂O₂, the total degradation of resorcinol and 55% mineralization in 80 and 100 min of irradiation, respectively. The reached degradation percentages were correlated to the presence of dissolved iron, demonstrating that in these processes, the homogeneous photo-Fenton reactions were mainly responsible for the resorcinol elimination.Likewise, in slurry system, where clay has normally an increased surface area, there was no increase in activity because of a reduced leached iron probably due to the diminished light penetration in the suspension. Despite the lower surface area, in comparison to that of the slurry, the clay plates have the advantage, as heterogeneous photo-catalysts, that separation of the reaction media after treatment is not needed, and thus, a potential use for batch and continuous reaction systems is proposed.