美术颜料废水治理技术

针对美术颜料生产过程中产生的废水特点，通过实验研究，有针对性地开发出美术颜料废水治理技术，并在示范工程中得到应用，进一步验证了此项技术的可行性。     

国家环境保护危险废物处置工程技术（天津）中心学术带头人介绍

蔡凌：教授级高级工程师,现任合佳公司总经理,环保工作17年．曾在德国、英国、日本、新加坡及香港等多个国家接受环保技术培训．在1987年-1996年天津环科院期间历任工艺工程师、主任工程师、总工程师、副总经理。主持了台湾统一公司铅酸蓄电池生产线的废气处理系统工程、天津东洋油墨有限公司颜料废气及废水处理工程、山东胜利油田废水处理工程、长春一汽凯尔海斯汽车底盘公司废水处理工程、天津试剂二厂废水处理工程、天津华士有限公司废水处理工程等数十项大型的总承包交钥匙工程。     

利用大型蚤和斑马鱼评价腈纶废水好氧-厌氧处理过程的急性毒性和遗传毒性变化

腈纶废水毒性较强且难以去除,对腈纶废水毒性及污水处理过程毒性削减能力进行评价,可为开发该类废水毒性减排技术提供科学依据。利用大型蚤及斑马鱼评价某腈纶废水的急性毒性和遗传毒性,及厌氧-好氧工艺对该废水毒性的削减能力。采用大型蚤活动抑制率和斑马鱼致死率表征废水急性毒性,采用斑马鱼肝细胞彗星尾矩表征废水遗传毒性。腈纶废水处理前对大型蚤和斑马鱼的急性毒性单位(TU)分别为1.2和2.9,经厌氧-好氧工艺处理后分别降至0.4和0.5。遗传毒性结果表明腈纶废水对斑马鱼肝细胞造成DNA损伤作用,经处理后遗传毒性仍显著高于阴性对照组。理化指标与毒性指标相关性分析表明,该废水氨氮与毒性显著相关,推测氨氮可能是该废水中的重要致毒因子之一。研究结果表明该腈纶废水采用现有厌氧-好氧工艺无法有效削减毒性,对受纳水体水生态环境造成潜在危害。     

论造纸中段废水和废纸造纸废水的处理原则

从造纸中段废水絮凝法处理和生化处理效果的实验研究结果出发,讨论了造纸中段废水处理的技术路线,指出絮凝法与好氧生化法联用是该废水处理的适宜方法。根据废纸造纸产生的两股废水（打浆洗涤废水和抄纸废水）的污染物特性,提出了废纸造纸废水处理的５条设计原则。     

金属负载活性炭催化氧化法处理ZPT生产废水

研究了金属负载活性炭催化剂在常温常压下催化氧化处理吡啶硫酮锌(ZPT)废水的技术，在探讨影响催化氧化效果诸因素的基础上，确定出中和预处理、后接两级催化氧化处理该废水的工艺流程，该流程的COD的去除率最高可达92％，处理出水达到国家污水综合排放标准二级指标。     

碱法制浆造纸废水生物膜法达标排放技术

本文介绍了一种适用于碱法麦草制浆造纸废水达标排放处理工艺－生物膜法。在对四个示范工程的前期试验试验研究中证实了生物膜法在碱法麦草浆造纸废水处理的技术和经济可行性。     

太阳光/电-Fenton法降解H-acid的表观动力学研究

进行了太阳光/电-Fenton法降解染料中间体H-acid模拟废水的表观动力学研究,通过对不同初始H-acid浓度和Fe2+浓度体系以及不同初始电压浓度体系反应的分析,确定该反应的表观动力学方程和动力学参数,为该技术降解H-acid废水优化反应条件提供了依据.结果表明,在固定初始pH值、支持电解质Na2SO4为0.10...     

工程经济学在镀铬废水处理技术上的费用效益探讨

本文用电镀镀铬废水为实例,运用净现值法——NPV法对两种典型的镀铬废水处理技术进行了效益分析,利用镀铬废水处理的费用函数作了现值比较、边际效益计算和动态经济分析,以此作为工程经济学在废水处理技术效益分析应用上的一个尝试,同时也为镀铬废水处理技术政策的制订提供信息。     

色楞金斯克制浆造纸厂废水和固体废物的回收利用

色楞金斯克制浆造纸厂位于距贝加尔湖60公里的色楞格河畔,年产17万吨未漂白纸浆,按照苏联政府1987年法令,该厂必须在1992年停止向色愣格河排放废水。本文讨论有助于使废水排放量减少90％（1989年减少到5000米~3/日 ）和到1992年使水全部回收利用成为可能的途径。如本文所述在色愣金斯克使用的技术,包括固体废物利用技术,是向着使该厂在生态上适合于受特别保护的贝加尔湖集水盆地前进了一大步。色楞金斯克厂西伯利亚制浆造纸工程研究所的工作人员也许能帮助有兴趣的同行发展类似的技术。     

对氨基酚生产废水的综合治理技术研究

本文提供的对氨基酚生产废水综合治理技术，采用蒸发结晶法回收工艺废水中的对氨基酚和硫酸铵，采用甲苯萃取－蒸馏分离法回收共沸废水中的苯胺，采用梯度浓度优势菌－常规生化组合技术处理混合废水，投资６１０万元建设年产２０００ｔ对氨基酚生产废水治理工程，排水可达到国家污水综合排放二级水质标准，每这可回收硫酸铵３０６０ｔ，苯胺３９０ｔ，对氨基酚６０ｔ，年回收价值５８０万元，年利税合计１８７万元，实现了废水处理与     

Ink utilization by mesopelagic squid

Remotely operated vehicle dive video recordings of deep-sea squid ink release were examined to determine species, ink release type, release depth, and accompanying behavior/s. Ink release was commonly observed between the surface and 1,842.1 m in Monterey Bay, CA, and surrounding waters. Six ink release types were observed: pseudomorphs, pseudomorph series, ink ropes, clouds/smokescreens, diffuse puffs and mantle fills. Each species released ink throughout all or most of its depth range; inking was not limited to shallow, sunlit waters. Individuals of each species produced one ink release type more commonly than other types, however, multiple ink types could be released by individuals of all species. Common behaviors preceded and/or followed each release type; pseudomorphs and pseudomorph series were generally associated with escape behaviors, while ink ropes, clouds, and puffs normally involved the animal remaining adjacent to or amid the ink. Deep-sea squids may use ink for defensive purposes similar to those of shallow-dwelling species when they release pseudomorphs, pseudomorph series, or large clouds, and may use ink puffs in intra-specific communication. The function of ink ropes and mantle fills is unknown.     

废水反硝化生物反应器中喹啉降解细菌的分离与特性

杂环化合物喹啉是焦化等工业废水中的一种难降解化合物.有关喹啉微生物降解的研究还很有限,分离筛选多样的喹啉降解细菌,对认识喹啉的降解机制和强化废水中喹啉的降解具有重要意义.本研究通过富集和多种分离条件的培养,从焦化废水活性污泥及唪啉驯化的生物膜样品中分离获得56株与喹啉降解相关的菌株,以16S rDNA双酶切方法进行ARDRA分型,将这些菌株分为12个OTU.选取部分代表菌株进行16S rDNA测序分析,表明分离所获得的菌株主要是Ochrobactrum、Bacillus、Pseudomonas和Rhodococcus属的微生物.通过对部分菌株测定其喹啉降解能力.发现大部分菌株都能以喹啉为唯一碳源进行生长并高效降解喹啉,极少数菌株不能单独降解喹啉.降解喹啉的Ochrobactrum属菌株还未见报道.     

Evolutionary relationships of Southern Ocean Octopodidae (Cephalopoda: Octopoda) and a new diagnosis of <Emphasis Type="Italic">Pareledone</Emphasis>

The phylogenetic relationships of eight species of incirrate octopodid from western Antarctica were investigated using molecular sequence data from the mitochondrial 16s ribosomal RNA gene. The genus Pareledone, which is endemic to the Antarctic, was found to be polyphyletic. On the basis of this and previous morphological studies, it is suggested that species that are morphologically similar to Pareledone polymorpha should be removed from the genus. This simplifies the diagnosis of Pareledone: a new diagnosis is given. The subfamilies Eledoninae and Graneledoninae were also found to be polyphyletic. The applicability of using the presence of an ink sac as a taxonomic character to define the subfamilies is discussed. Loss of an ink sac is almost certainly an adaptation to depth and use of this character has produced an artificial classification with no evolutionary significance. As the other two subfamilies, Octopodinae and Bathypolypodinae, are also separated by this character, it is probable that all the subfamilies of the Octopodidae are polyphyletic. The use of subfamilies should therefore be discontinued until our understanding of the evolution of the family Octopodidae increases.     

Jobs and climate policy: Evidence from British Columbia's revenue-neutral carbon tax

This paper examines the employment impact of British Columbia's revenue-neutral carbon tax implemented in 2008. While all industries appear to benefit from the redistributed tax revenues, the most carbon-intensive and trade-sensitive industries see employment fall with the tax, while clean service industries see employment rise. By aggregating across industries I find the BC carbon tax generated, on average, a small but statistically significant 0.74 percent annual increases in employment over the 2007–2013 period. This paper provides initial evidence showing how a revenue-neutral carbon tax may not adversely affect employment.     

Pollution tolerance and distribution pattern of plants in surrounding area of coal-fired industries

Higher concentration of SO2 and particulate matters was reported in surrounding areas of coal-fired industries which influences the distribution pattern of plants. Sensitive plant species are abolished from such areas, however, only pollution tolerant species survive under stress conditions. The present study was designed to investigate the vegetation composition around coal-fired industries i.e. brick industries. To categorise plants as sensitive or resistant air pollution tolerance index (APTI) value was calculated. Out of 99 plants studied, Ricinus communis with APTI 81.10 was found to be the most resistant wild plant showing uniform distribution at all the polluted sites. On the other hand, Lepidium sativum with APTI 5.27 was recorded as the most sensitive plant and found to be present only at the less polluted sites.     

Technological advance and the conservation of resources

SUMMARY

This paper reviews the nature of technological changes in forestry and the forest industries and their impacts on forest conservation and deforestation. While noting that technological changes have made available substantially more forest products to consumers, with higher quality and/or at lower prices than would otherwise have been possible, not all impacts have been positive.

The authors take a long-term perspective of how changes in technologies, markets and transportation are likely to affect the management and conservation of tropical forests. The paper defines a research challenge to direct and harness science and innovation towards increasing the productivity of forests and reducing the environmental costs associated with forest industries and products.     

Impact of coal industries on the quality of Damodar river water

Increasing demand for water in domestic, agricultural, and industrial sectors necessitates exploitation of water either in the form of groundwater or from natural resources. To safeguard the long-term sustainability of water resources and their utilization, the quality of water has to be periodically monitored and determined for various characteristics, especially when the sources are polluted, such as Damodar river. Central Institute of Mining and Fuel Research (CIMFR), Dhanbad, is carrying out research work on coal and its utilization and associated environmental concerns. The blood stream of life for the whole Jharia Coalfield is none other than the river Damodar. CIMFR's campus also depends exclusively on river Damodar for meeting its demand of drinking water. This study is a general survey toward the characteristics of Damodar river water, with special emphasis on the pollutant parameters, and evaluation of the treatment process being carried out at the institute for potability. Damodar river water is indeed affected by the disposal of the wastes without any pre-treatment by different coal-based industries established in its basin. The quantity of dissolved and suspended solids, total hardness, chemical oxygen demand, and coliform bacterial count are higher in Damodar water due to the disposal of the waste/effluents from coal-washing plants, coke ovens, cement, and other industries, but well within the permissible limit which is probably attributable to the high-carrying capacity of the river. The river is still not that much affected as it is usually apprehended, and it can be well utilized for potable and domestic purposes after simple treatment.     

Mutagenicity assessment of textile dyes from Sanganer (Rajasthan)

Sanganer town, district Jaipur (Rajasthan, India) is famous worldwide for its hand block dyeing and textile printing industries. These industries use a variety of chemicals and dyes during processing and finishing of raw materials. Most of the textile dyes used by these industries have not been evaluated for their impact on health and the environment. The workers in these industries are exposed to such dyes with no control over the length and frequency of exposure. Further, untreated and sometimes even treated effluents from these industries are released into surface waters of Amani Shah drainage or through the drainage systems, seep into the ground water and adjoining water bodies. Since many textile dyes are known carcinogens and mutagens, a complete evaluation of the safety of these dyes in the human environment must include an evaluation of their genotoxicity or mutagenicity. A total of 12 textile dyes from Sanganer were tested for their mutagenicity, by Ames Salmonella reversion assay using strain TA 100 of Salmonella typhimurium. Only 1 dye, Red 12 B showed absence of mutagenic activity. The remaining 11 dyes were all positively mutagenic.     

天津节能减排、低碳发展战略思考

目前天津在节能减排、低碳发展方面取得了一定成效,但仍面临着巨大的压力。其主要原因：经济发展对能源消耗的依赖程度较高,能源消费对高碳能源的依赖程度过高,经济发展对高碳产业的依赖程度过高。因此,天津节能减排、低碳发展的战略目标应指向＂脱钩＂,即经济发展逐渐降低对能源消耗的依赖程度;战略核心在于能源消费要从源头上逐渐摆脱对高碳能源的过度依赖,经济发展要逐步摆脱对高碳产业和产业结构的过度依赖。     

Perceived importance of sustainability dimensions in the Portuguese metal industry

The growing interest of stakeholders regarding the contribution of organizations to Sustainable Development is influencing organizational behavior and strategic planning. The purpose of the present paper is to analyze the perception of the importance of organizational sustainability dimensions in a relevant economic sector: the metal industry. Survey data was collected from a sample of 211 Portuguese industries, and non-parametric statistical tests were used to validate five research hypotheses regarding the importance of the economic, environmental, social and cultural dimensions of sustainability. The results obtained demonstrate awareness of the sampled industries regarding all sustainability dimensions, recognizing that their importance has been increasing over the years, and prospecting that this importance will continue to increase in the future. The industries in this sample revealed different degrees of perceived importance for the different sustainability dimensions: the highest importance was given to the economic dimension, and culture was considered the least important sustainability dimension. However, the perception of the respondents is that these differences will be less relevant in the future. The results also show that companies with certified management systems reveal a higher perceived importance regarding sustainability dimensions. Also, industries with higher values of annual turnover, number of employees and export sales tend to give higher degrees of importance to sustainability dimensions. Considering the economic, environmental and social impacts of metal industries at an international level, the awareness of this industrial sector regarding the importance of sustainability is a relevant step to the commitment towards Sustainable Development.