城市污水处理厂综合评价指标体系构建与应用研究

为了科学管理城市污水处理厂的运行,使其发挥更大的环境经济效益,本文将生命周期的思想融入到污水厂的综合评价中。采用“演绎与归纳”相结合的方法,构建包含环境释放、资源消耗、经济效益、人体健康和技术性能5个子系统,22个指标的城市污水处理厂综合评价指标体系,并以哈尔滨某城市污水处理厂为例进行应用研究。生命周期思想的融入使得评价体系不仅强调了污水处理厂的治理效能。还充分体现了其环境影响负荷。该指标体系的建立将为制定污水处理厂的总体环境管理政策提供一定的科学依据。     

An inventory analysis of oil shale energy produced on a small thermal power plant

Energy produced in Estonia from oil shale is studied using the inventory analysis of the product life cycle assessment (LCA) method. The life cycle is taken as an oil shale mine and thermal power plant with consumer supply systems, which are close to each other and are technologically interconnected.The effectiveness of energy production over the whole life cycle is calculated and the energy and the material balances are presented. Local environmental effects of the oil shale extraction and the energy production are briefly described.The first step in defining the oil shale energy as an important input parameter for the LCA studies of all other products of Estonia is made. The collected data can serve as a basis for the environmental improvement programs.     

Environmental assessment of solar thermal collectors with integrated water storage

Solar thermal systems feed on a “clean” energy source. However, a complete analysis of the environmental performance of solar thermal collectors should take into account not only their operation phase, but also their whole life cycle. This paper reports the results of a life cycle assessment of a solar thermal collector with integrated water storage. The study, carried out by means of SimaPro 5.0 software, aims at drawing a thorough environmental profile of the collector, highlighting the most relevant contributions to the total impacts, measured by means of a set of aggregate environmental indicators. In order to evaluate the possible improvements of the system configuration, several sensitivity analyses were performed, for different phases of its life cycle. Thanks to this optimization, the reduction of the impacts could be up to 40%. Environmental pay back times were calculated as well. Their values range from 5 to 19 months, remarkably lower than the expected lifespan of the systems (15–20 years).     

基于生命周期评价的船舶环境影响行为研究

运用目前环境管理的一种有效工具——生命周期评价方法（LCA）,探讨船舶在其生命周期内对环境的影响行为。结果表明：船舶生命周期内对环境的影响主要是光化学烟雾,其次是酸化和全球变暖;而在船舶生命周期各个阶段中,营运阶段对各环境类型的贡献最大,原材料制造阶段、运输阶段和船舶制造阶段对环境影响较小。     

基于LCA的污水处理方案碳中和综合影响评价

在"碳达峰,碳中和"双碳目标背景下,污水处理行业碳中和规划中尚缺乏对工艺设计方案的定量化综合影响评价。为此,基于全生命周期(LCA)框架,建立全生命周期碳足迹、环境、经济综合影响评价模型(LCA-CEE),并利用该模型对2种不同污泥处理工艺下污水处理厂(A方案:污泥填埋;B方案:污泥-厨余垃圾共消化)以30年为限的建设阶段、运行阶段、拆除阶段中能耗、物耗、污染排放等方面进行综合影响评价与对比分析。结果表明:B方案利用共消化热电联产系统发电量高达38.9 MW·h,碳中和率达到133%,实现能源自给自足,经济效益较A方案提高1.6倍且环境影响显著减小。该LCA-CEE模型从全流程评价节能减排路径,为污水处理行业碳中和规划提供理论支撑。     

塑料牛奶包装及处置方式生命周期环境影响研究

采用生命周期评价(LCA)法研究了塑料牛奶包装的全生命周期环境影响,并在处置阶段对不同处置方式的环境影响进行比较.通过现场和资料调研的方式,获得所有生命周期阶段能量物质的输入/输出和环境外排数据.结果表明:塑料牛奶包装生命周期阶段中环境影响比重最大的是原料获取阶段,占90%以上.其全生命周期环境影响主要集中在化石燃料、无机物对人体损害和气候变化3个方面,在致癌、酸化富营养化和生态毒性方面影响稍小.3种处置方式对环境影响由大到小依次为填埋>焚烧>再生,其中填埋和焚烧处置分别比塑料包装处置阶段前的环境影响增加16.1%和5.3%,再生可降低75.9%.     

轻型纯电动汽车生产和运行能耗及温室气体排放研究

基于中国本地化的环境负荷数据,建立了电动汽车全生命周期模型,深入分析和评估了电动汽车生产和运行两个阶段的能耗及温室气体排放(Greenhouse gases,GHGs).结果表明:电动汽车生产和运行过程的总能耗为474 GJ;GHGs为40500 kg(以CO2当量计),电动汽车生产和运行过程的GHGs分别占总排放量的23.5%和76.5%.对于电动汽车生产过程能耗和GHGs而言,原材料生产均为主要贡献者,GHGs占到车辆生产过程的74.6%,占生命周期的17.5%.另外,情景分析表明,再生材料应用、单位电力GHGs和百公里电耗能够在很大程度上影响电动汽车的碳排放.再生金属替代原生金属后,从情景1到情景5,车辆生产的GHGs下降了约22.2%,车辆生产和运行过程的总GHGs下降了约4.7%;单位电力GHGs每下降1%,电动汽车运行GHGs下降0.9%;电动汽车百公里电耗每下降1.0%,车辆生产和运行过程总GHGs下降约1.0%.因此,发展清洁能源、降低火力发电比例、优化原材料生产工艺、提高再生原材料用量等,是有效降低电动汽车全生命周期过程总能耗和GHGs的重要途径.     

Influence of impact assessment methods in wastewater treatment LCA

Facing the increase of environmental concern in the water treatment field, stakeholders need reliable decision support tools to assess environmental performances of urban and industrial wastewater systems. To discuss how life cycle assessment (LCA) can be applied to wastewater treatment projects, such an assessment has been performed through a case study on a full-scale plant. Methodological issues that had to be dealt with are briefly exposed. Five life cycle impact assessment (LCIA) methods have been used: CML 2000, Eco Indicator 99, EDIP 96, EPS and Ecopoints 97. Consistent assessment between these methods has been obtained for greenhouse effect, resources depletion and acidification. Eutrophication is correctly estimated if one looks at the potential impact of a treatment scenario but not at the characterization of the eutrophication state of a specific receiving stream. Work is needed concerning human toxicity as large discrepancies are noticed between the impact assessment methods.     

Assessments on emergy and greenhouse gas emissions of internal combustion engine automobiles and electric automobiles in the USA

Increasing energy consumption in the transportation sector results in challenging greenhouse gas (GHG) emissions and environmental problems. This paper involved integrated assessments on GHG emissions and emergy of the life cycle for the internal combustion engine (ICE) and electric automobiles in the USA over the entire assumed fifteen-year lifetime. The hotspots of GHG emissions as well as emergy indices for the major processes of automobile life cycle within the defined system boundaries have been investigated. The potential strategies for reducing GHG emissions and emergy in the life cycle of both ICE and electric automobiles were further proposed. Based on the current results, the total GHG emissions from the life cycle of ICE automobiles are 4.48E + 07 kg CO₂-e which is 320 times higher than that of the electric automobiles. The hotspot area of the GHG emissions from ICE and electric automobiles are operation phase and manufacturing process, respectively. Interesting results were observed that comparable total emergy of the ICE automobiles and electric automobiles have been calculated which were 1.54E + 17 and 2.20E + 17 sej, respectively. Analysis on emergy index evidenced a better environmental sustainability of electric automobiles than ICE automobiles over the life cycle due to its higher ESI. To the authors’ knowledge, it is the first time to integrate the analysis of GHG emissions together with emergy in industrial area of automobile engineering. It is expected that the integration of emergy and GHG emissions analysis may provide a comprehensive perspective on eco-industrial sustainability of automobile engineering.     

生命周期矩阵在评价环境标志产品中的应用

环境标志说明产品在其整个生命周期中的环境表现满足一定的要求。生命周期评价技术被许多国家作为认证环境标志产品的工具。文章介绍了生命周期评价的定义和框架，以及简式生命周期矩阵在评价环境标志产品中的应用。在分析简式生命周期矩阵不足的基础上，提出了用于评价环境标志产品的改进生命周期矩阵。最后，探讨了生命周期矩阵在其它领域的应用。     

商用车铝合金与钢制轮辋生命周期环境影响评价对比分析

基于生命周期评价(LCA)理论,运用Ga Bi软件建模,采用EDIP 2003评价体系,对某款商用车铝合金轮辋和钢制轮辋的生命周期环境影响进行了评价和对比分析.结果表明:在原材料获取阶段铝合金轮辋对环境的影响要远远大于钢制轮辋;制造阶段两种轮辋对环境的影响相差不大;使用阶段钢制轮辋对环境的影响大于铝合金轮辋;综合所有阶段来看,当车辆总行驶里程低于11.6万km时,铝合金轮辋对环境的影响更大,超过11.6万km后,钢制轮辋对环境的影响更大.     

生命周期评价在水泥企业清洁生产审核中的应用

利用生命周期评价工具对企业的生产过程进行全面分析与评价，做好企业清洁生产的审核工作具有重要理论研究价值和现实应用意义。运用生命周期评价方法对重庆小南海水泥厂普通硅酸盐水泥生产过程进行了初步评价，认识了普通硅酸盐水泥生产过程的环境协调性，为普通硅酸盐水泥进一步提高环境性能提供了理论依据。     

Environmental impacts of disposable cups with special focus on the effect of material choices and end of life

Life cycle thinking is emphasised in EU policies and legislation. All products have environmental impacts during their production, use and disposal. It is important to ensure that environmental impacts are considered throughout the life-cycle and it will be more and more important for the industry to understand the meaning of the life cycle thinking and to adopt it.The environmental impacts of an industrial disposable cup concept were studied with help of life-cycle assessment method. The objective of the study was to create new knowledge about the life cycle effects of the carton based cup concept. The scope of the study was to compare the effects of material choices and different end-of-life scenarios. The paper focuses on the global warming potential of the cup concept. The carton based products were covered either with polyethene or polylactide. In addition, the environmental impacts of the carton-based cups were compared to the estimated environmental impacts of polymer-based cups. The polymer based cups were made of polyethylene terephthalate. The paper shows that significant improvements can be achieved with help of the choice of materials and optimal end of life.     

从LCA视角评估钢铁产品改进的环境效益

钢铁产品性能的提高往往会增加其制造环节的环境负荷,但是在很多领域的使用过程中,高性能钢材相对于普通钢材,更有利于环境。因此评估钢铁产品改进的环境效益需要一个系统化的科学方法———生命周期评价(LCA)。从钢铁产品全生命周期视角,讨论了钢铁产品性能提升与环境影响的关系,阐述了如何利用LCA方法评估钢铁产品全生命周期环境绩效,并列举了宝钢利用LCA方法评估钢铁产品性能改进环境效益的两个案例:某变压器采用性能更高的B30P110取向硅钢片取代原B30G130取向硅钢片,其生命周期碳减排15.1%;宝钢钢制二片罐用镀锡钢板从0.28mm经过6次减薄到0.225mm,使钢罐生命周期碳排放降低14.5%。     

Life cycle assessment to eco-design food products: industrial cooked dish case study

An industrial cooked dish is one of the food products with the most complex agri-food chain. In this study, an eco-design pilot experiment has been performed as a way to develop more efficient and sustainable agri-food products throughout its whole life cycle. To achieve this, a life cycle assessment (LCA) has been carried out to identify and quantify the environmental performance of the production and distribution of a cooked tuna with tomato dish. The most important stages of the life cycle have been established taking into consideration the full environmental impact as well as the potential reductions achievable by the application of various improvements.     

在污泥资源化利用过程中引入生命周期评价方法

生命周期评价是一种评价产品整个寿命周期中环境负荷的方法。为了促进资源的循环利用和经济的可持续发展,在污泥资源化利用过程中引入生命周期评价方法显得非常必要。介绍了引入生命周期评价方法的必要性及污泥资源化利用生命周期评价的内容和步骤。     

电子产品野外环境下温循加速载荷谱编制方法

目的 将电子产品在野外环境下日变化波动与季节差异明显的温度载荷编制成温循载荷谱和转换为加速载荷谱。方法 通过四点雨流计数法提取原谱中的载荷循环信息,对提取的循环信息进行分布拟合、相关性检验等统计分析,进而构建循环均值与范围值的联合概率密度函数,再运用概率密度法,编制出8×8二维环境载荷谱。在二维载荷谱基础上,编制出温循载荷谱,使用针对电子部件参数修正的加速方程转化为加速载荷谱。结果 利用野外作业现场1个作业周期内的气温纪录,提供了一套编制温循载荷谱和转换加速载荷谱的合理化流程和解决方案。结论 该制谱方法可以利用原始环境谱中绝大部分有效信息,较好地还原电子部件野外作业阶段经历的温度变化过程,为电子产品的加速寿命试验和使用寿命预测奠定基础。     

环境试验在新时期装备环境适应性工作中应用

目的 研究环境试验在新时期装备环境适应性工作中的应用。方法 对各类环境试验的特点进行分析,研究新时期下环境试验在装备不同层次上应用的方法,以及环境试验在装备全寿命周期中的应用要求。结果 实验室环境试验、自然环境试验、使用环境试验以及虚拟环境试验在试验可信度、效率和可分析性上各有其特点。在装备系统不同层次上和装备全寿命周期中,实施环境试验的要求和侧重点不同。结论 在新时期装备的环境适应性工作中,需要用系统工程思想建立起综合运用各类环境试验的策略,在装备各层次统筹各类环境试验,在装备全寿命周期不同阶段应用不同的环境试验。未来应进一步加强多因素环境试验、虚拟环境试验的技术研究和应用,强化自然环境试验基础性地位和加速试验在工程中的应用,以满足新时期装备贴近实战、全面把关、摸清底数、全过程考核评价的需求。     

The roles of computer models in the environmental policy life cycle

In this article, we identify four typical roles played by computer models in environmental policy-making, and explore the relationship of these roles to different stages of policy development over time. The four different roles are: models as eye-openers, models as arguments in dissent, models as vehicles in creating consensus and models for management. A general environmental policy life cycle is used to assess the different roles models play in the policy process. The relationship between the roles of models and the different stages of the policy life cycle is explored with a selection of published accounts of computer models and their use in environmental policy-making.     

生态产品生命周期设计概念框架

生态产品是从原材料采掘到产品制造、运销、使用和最终报废处理整个生命周期总环境影响最小的产品，而生命周期设计是实现产品环境影响最小化和污染预防的最好方式之一。生态产品的开发，应从设计开始，生态产品生命周期设计的概念是一种基于产品系统的设计方法；其设计步骤有确定系统边界、环境现状评价、设计要求分析、各要求优先排序与协调，设计对策、设计方案评价等几个方面，随着ＩＳＯ１４０００体系的全面建立，产品生命周期