废食用油生物柴油的制备及其掺烧时的动力与排放特性

为了查明生物柴油对环境的影响以及废食用油制备的生物柴油对发动机性能和排放特性的影响,研究了生物柴油环境生命周期评价及其对环境的影响以及废食用油生物柴油的生产工艺流程,即甲醇与废食用油在催化剂作用下发生酯交换反应生产出生物柴油.所制备的生物柴油和柴油,按20%和50%掺混后在2台车用增压直喷式柴油机上进行了台架动力和排放特性的测试.试验结果表明,与柴油相比,掺混燃料的动力性和油耗率分别约有3%的下降和8%的上升,烟度、HC、CO和PM排放降低幅度最大分别达65%、11%、33%和13%,而NO_x排放有不同程度的上升.本研究表明,发动机燃用低比例的生物柴油掺混燃料,在发动机不作任何改动和调整时,可以在经济性、动力性和排放等方面取得令人满意的综合结果.     

含糖废水活性污泥制备生物柴油的方法探究

本研究以处理葡萄糖废水的活性污泥为研究对象,考察了细胞破壁方法、油脂萃取溶剂及甲酯化方案对制备生物柴油的影响,并提出适用于活性污泥制备生物柴油的方法,以期为实现剩余污泥资源化、降低生物柴油生产成本提供技术支持.实验采用了盐酸加热、盐酸加热-超声、超声及液氮冷冻4种细胞破壁方法,选用二氯甲烷-甲醇和正己烷-甲醇-丙酮两种油脂萃取溶剂组合,使用油脂萃取-甲酯化(两步法)和原位甲酯化(一步法)两种方案,以降解含糖废水的活性污泥为原料,制取生物柴油.研究结果表明,盐酸加热破壁配合二氯甲烷-甲醇提取油脂的两步法获得的生物柴油产量最高,每克污泥(干重)的生物柴油产量达(60.4±3.5)mg·g-1.超声破壁一步法虽产量偏低((45.5±3.2)mg·g-1,以SS计),但步骤相对简单,化学试剂用量少.通过GC-MS分析发现,不同甲酯化方案所制备的脂肪酸甲酯(FAMEs)在组分上差别不大,除了含有月桂酸甲酯、肉豆蔻酸甲酯、棕榈油酸甲酯、棕榈酸甲酯、油酸甲酯、硬脂酸甲酯,还含有5种带甲基支链的脂肪酸甲酯及两种单不饱和脂肪酸甲酯,这可能对改善生物柴油的低温流动性有一定的帮助.     

Life cycle assessment of sunflower and rapeseed as energy crops under Chilean conditions

An option for the agriculture and energy sectors in Chile is the cultivation of energy crops, but environmental studies are first needed in the framework of a sustainable national energy policy.In this study, we used a cradle-to-farm gate Life Cycle Assessment (LCA) to compare environmental impacts and energy and water demand of rapeseed (Brassica napus L.) and sunflower (Helianthus annuus L.) in Chile, as potential oleaginous crops for first-generation biodiesel production. National agricultural data are used for the LCA inventory and process data of international databases are adapted to local conditions. The effect of field N₂O emissions and land use change is evaluated. The results indicate that, compared to sunflower, rapeseed production has a better environmental performance in 9 out of the 11 impact categories evaluated, and lower water consumption. The energy demand of rapeseed is 4.9 GJ/t seed, 30% less than that of sunflower. Mineral fertilizers cause the highest environmental impact in both crops. The analysis of the life cycle of fertilizers indicates that extraction of raw materials and its production are key stages. Attempts to reduce the environmental impact and energy requirement of both crops should be mainly associated with the evaluation of other types of fertilization. In addition, particularly for sunflower, low impact herbicides should be evaluated, seed yield improved and cultivation practices optimized. If the crops are produced on degraded grasslands, the greenhouse gas emissions may be reduced.     

Application of red mud as a basic catalyst for biodiesel production

Red mud was investigated in triglyceride transesterification with a view to determine its viability as a basic catalyst for use in biodiesel synthesis.The effect of calcination temperature on the structure and activity of red mud catalysts was investigated.It was found that highly active catalyst was obtained by simply drying red mud at 200°C.Utilization of red mud as a catalyst for biodiesel production not only provides a cost-effective and environmentally friendly way of recycling this solid red mud waste,significantly reducing its environmental effects,but also reduces the price of biodiesel to make biodiesel competitive with petroleum diesel.     

Global environmental consequences of increased biodiesel consumption in Switzerland: consequential life cycle assessment

This study assesses the direct and indirect environmental impacts to be expected if Switzerland should replace one percent of its current diesel consumption with imports of A) soybean methyl ester (SME) from Brazil, or B) palm methyl ester (PME) from Malaysia. In order to take into account possible future consequences, what-if scenarios were developed and assessed by means of a consequential LCA. In contrast to attributional LCA, the consequential approach uses system enlargement to include the marginal products affected by a change of the physical flows in the central life cycle. This means that the LCA considers all inputs and outputs which are linked to biodiesel production and that the product system is subsequently expanded to include the marginal products affected. Both future systems are assessed in comparison with the environmental scores of the fossil equivalent to biodiesel, i.e. diesel low in sulphur. The environmental burdens are measured by means of greenhouse gas emissions (GHG), land occupation and various non-aggregated and aggregated environmental impact indicators.In sum, the environmental impacts of an increased SME consumption depend on the environmental scores of the marginal replacement products on the world market, rather than on local production factors. In other words, the marginal products assumed to be affected are most important for the results obtained, i.e. in particular the marginal vegetable oil, fodder cake and land areas. In this study it is SME production increased at the expense of the available soybean oil which shifts the impacts associated with soybean oil production to the production of the marginal vegetable oils on the world market. In this perspective, it is not relevant in which country biodiesel production takes place, but rather which vegetable oil is involved. With respect to PME, the most relevant determining factor for the environmental impacts is the land area affected by the increased cultivation of oil palms. Currently, this expansion displaces primarily peat land and rain forest. This causes GHG emissions which are much higher than the emissions of the fossil reference. All in all, both PME from Malaysia and SME from Brazil cause more environmental impact than allowed by the Swiss tax redemption on agro-biofuels (max. 60% GHG emissions and 125% UBP of the fossil reference).     

Optimizing electrocoagulation process for the treatment of biodiesel wastewater using response surface methodology

The production of biodiesel through a transesterification method produces a large amount of wastewater that contains high levels of chemical oxygen demand (COD) and oil and grease (O&G). Currently, flotation is the conventional primary treatment for O&G removal prior to biological treatments. In this study, electrocoagulation (EC) was adopted to treat the biodiesel wastewater. The e ects of initial pH, applied voltage, and reaction time on the EC process for the removal of COD, O&G, and suspended solids (SS) were investigated using one factor at a time experiment. Furthermore, the Box-Behnken design, an experimental design for response surface methodology (RSM), was used to create a set of 15 experimental runs needed for optimizing of the operating conditions. Quadratic regression models with estimated coe cients were developed to describe the pollutant removals. The experimental results show that EC could e ectively reduce COD, O&G, and SS by 55.43%, 98.42%, and 96.59%, respectively, at the optimum conditions of pH 6.06, applied voltage 18.2 V, and reaction time 23.5 min. The experimental observations were in reasonable agreement with the modeled values.     

The roles of cleaner production in the sustainable development of modern societies: an introduction to this special issue

This issue of the Journal of Cleaner Production is based upon papers presented at the 1st International Workshop Advances in Cleaner Production (CP) held in São Paulo, Brazil, in 2007. The conference had the short-term purpose of deepening the Brazilian discussion on “The Roles of Cleaner Production in the Sustainable Development of Modern Societies”, and it had the long-term objective of providing an on-going interdisciplinary forum for knowledge development and exchange on Cleaner Production (CP) and Sustainable Development. This issue is devoted to papers covering a broad range of perspectives of CP practices and strategies. A special focus is placed upon methodological tools designed to support effective decision-making pertaining to quantitative benefits from CP.The ten papers provide insights from research designed to holistically integrate CP to help society make effective progress to sustainability. Papers cover the importance of informal knowledge, as complementary to formal knowledge, in performing effective ‘Environmental Impact Assessments.’ One paper explores the roles of radical and incremental innovation in the context of alternative automotive technologies. Benefits of Ecodesign are explored in two papers; one concerning its integration with remanufacturing to extend the life of used products and one focusing the adoption of ‘Emergy Environmental Accounting,’ as a complementary decision-making tool. The development of the Brazilian LCI database for ‘hydroelectric power generation’ and its contribution to support regionally relevant LCA studies is highlighted in one paper. The complete production chains of biodiesel and bioethanol are evaluated by using global methodologies, which help in the development of more objective and effective solutions. A “compensatory area”, calculated in terms of emergy, is proposed in order to work in a sustainable way for bamboo production. Finally, a paper about a novel approach for recycling used PET is also included.     

Biogenic greenhouse gas emissions linked to the life cycles of biodiesel derived from European rapeseed and Brazilian soybeans

Biogenic emissions of carbonaceous greenhouse gases and N₂O turn out to be important determinants of life cycle emissions of greenhouse gases linked to the life cycle of biodiesel from European rapeseed and Brazilian soybeans. For biodiesel from European rapeseed and for biodiesel from Brazilian soybeans grown for up to 25 years with no tillage on arable soil for which tropical rainforest or Cerrado (savannah) have been cleared, the life cycle emissions of greenhouse gases are estimated to be worse than for conventional diesel. Improving agricultural practices should be an important focus for cleaner production of biodiesel. These may include increasing soil carbon stocks by, e.g., conservation tillage and return of harvest residues and improving N-efficiency by precision agriculture and/or improved irrigation practices.     

生命周期视角下废弃餐饮油脂炼制生物柴油的环境效益分析

废弃餐饮油脂的资源化利用是关乎公众健康和环境保护的重要举措.目前我国废弃餐饮油脂炼制生物柴油的环境效益尚不明晰、国家政策模糊,相关产业发展滞缓.本研究以国内废弃餐饮油脂炼制生物柴油的典型企业为例,利用GaBi软件对废弃餐饮油脂的收集、预处理、酯化和运输等过程全生命周期阶段的资源环境影响进行系统核算,评估其环境效益,以期为国家生物柴油行业发展和相关政策制定提供科学依据.研究结果表明:①整个生命周期过程中,酯化阶段的环境影响最大,各指标占比为52.91%～96.05%,其环境影响主要是由燃煤、用电和甲醇消耗引起;②敏感性分析结果显示,燃煤、用电、甲醇消耗和收集距离的变化对整个生命周期环境影响结果有着较大影响;③废弃餐饮油脂炼制的生物柴油生命周期化石能源消耗16406 MJ·t~(-1)、温室气体排放815 kg CO_2 eq·t~(-1),与石化柴油相比,具有较好的节能和温室气体减排效益.     

Attributional life cycle assessment of woodchips for bioethanol production

Besides the apparent need to reduce greenhouse gas emissions, other important factors contributing to the renewed interest in biofuels are energy security concerns and the need of sustainable transportation fuel. Nearly 30% of the annual CO₂ emissions in the U.S. come from the transportation sector and more than half of the fuel is imported. Biofuels appear to be a promising option to reduce carbon dioxide emissions, and the reliance on imported oil concomitantly. The interest on (ligno) cellulosic ethanol is gaining momentum as corn-based ethanol is criticized for using agricultural outputs for fuel production. Among many lignocellulosic feedstocks, woodchips is viewed as one of the most promising feedstocks for producing liquid transportation fuels. The renewable and carbon neutral nature of the feedstocks, similar chemical and physical properties to gasoline, and the low infrastructure cost due to the availability of fuel flex vehicles and transportation networks make (ligno) cellulosic bioethanol an attractive option. An in-depth LCA of woodchips shows that harvesting and woodchips processing stage and transportation to the facility stage emit large amount of environmental pollutants compared to other life cycle stages of ethanol production. Our analysis also found that fossil fuel consumption and respiratory inorganic effects are the two most critical environmental impact categories in woodchips production. We have used Eco-indicator 99 based cradle-to-gate LCA method with a functional unit of 4 m³ of dry hardwood chips production.     

Simulation and life cycle assessment of process design alternatives for biodiesel production from waste vegetable oils

This study uses the process simulator ASPEN Plus^® and Life Cycle Assessment (LCA) to compare three process design alternatives for biodiesel production from waste vegetable oils that are: the conventional alkali-catalyzed process including a free fatty acids (FFAs) pre-treatment, the acid-catalyzed process, and the supercritical methanol process using propane as co-solvent. Results show that the supercritical methanol process using propane as co-solvent is the most environmentally favorable alternative. Its smaller steam consumption in comparison with the other process design alternatives leads to a lower contribution to the potential environmental impacts (PEI’s). The acid-catalyzed process generally shows the highest PEI’s, in particular due to the high energy requirements associated with methanol recovery operations.     

生物柴油的研究与应用

生物柴油作为一种可再生能源，可以由动植物油脂通过转酯化反应来制备，它在燃料特性方面与矿物柴油有着十分相似的品质，因此使用生物柴油无须对现有的柴油发动机做任何改造，以生物柴油为燃料的机动车尾气中不含硫氧化物，排出的总颗粒物、总ＨＣ和ＣＯ的量分别是矿物柴油的３０％、４０％和５０％。生物柴油的热效率比矿物柴油高５％～８％，而两者在发动机输出功率上并没有太大的差异。     

二氧化钛光催化氧化阿散酸

阿散酸(p-arsanilic acid,ASA)是一种重要的有机砷化合物,较无机砷更加难以去除,目前关于去除水中ASA研究少有报道.本研究主要评价了TiO_2光催化剂(P25)对ASA的去除效果,考察了P25投量、pH和光照强度对其光催化氧化ASA的影响,探究了ASA光降解产物和主要机制.结果表明,在P25催化作用下,模拟自然光可氧化降解ASA为As(V),最终通过P25对As(V)的吸附作用将水中砷有效去除.当ASA初始浓度为2 mg·L~(-1),P25投量为1 g·L~(-1)时,光催化氧化-吸附0.5 h后,水中剩余砷的浓度约为0.34 mg·L~(-1).酸性条件下ASA的去除率远远高于碱性条件,最佳光照强度为68.5 mW·cm~(-2).P25光催化氧化ASA过程中羟基自由基起到了主要作用.     

餐饮废油均相法制取生物柴油研究进展

阐述了餐饮废油(WCO)制备生物柴油的均相催化方法,介绍了餐饮废油生物柴油的特性和排放性能,并展望了生物柴油生产的发展趋势.     

微电解、A/O和膜生物反应器组合工艺处理高浓度有机氮废水

农药百菌清及其中间体生产废水含有大量有机物和无机盐,特别是氰基苯类化合物,对细菌有强抑制和毒害作用,且生物处理中有机氮转化产生大量氨氮,易造成污泥膨胀,废水采用传统生化处理工艺无法运行。而采用微电解、A/O和膜生物反应器组合工艺建设的废水处理工程,运行良好,出水各项指标达到接管排放标准。     

Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles – Critical issues

The main aim of the study was to explore how LCA can be used to optimize the design of lithium-ion batteries for plug-in hybrid electric vehicles. Two lithium-ion batteries, both based on lithium iron phosphate, but using different solvents during cell manufacturing, were studied by means of life cycle assessment, LCA. The general conclusions are limited to results showing robustness against variation in critical data. The study showed that it is environmentally preferable to use water as a solvent instead of N-methyl-2-pyrrolidone, NMP, in the slurry for casting the cathode and anode of lithium-ion batteries. Recent years’ improvements in battery technology, especially related to cycle life, have decreased production phase environmental impacts almost to the level of use phase impacts. In the use phase, environmental impacts related to internal battery efficiency are two to six times larger than the impact from losses due to battery weight in plug-in hybrid electric vehicles, assuming 90% internal battery efficiency. Thus, internal battery efficiency is a very important parameter; at least as important as battery weight. Areas, in which data is missing or inadequate and the environmental impact is or may be significant, include: production of binders, production of lithium salts, cell manufacturing and assembly, the relationship between weight of vehicle and vehicle energy consumption, information about internal battery efficiency and recycling of lithium-ion batteries based on lithium iron phosphate.     

Assessing the environmental impact of metal production processes

Evaluating both new and existing processes for primary metal production to assess their environmental impacts is often difficult due to the many inputs and outputs involved. Life Cycle Assessment (LCA) is a methodology that can be used for such purposes to identify those parts of the metal production life cycle that have significant environmental impacts. LCA has been used by CSIRO Minerals to assess the “cradle-to-gate” environmental impacts of a number of metal production processes practised either currently or potentially in Australia. The metals considered included copper, nickel, aluminium, lead, zinc, steel, stainless steel and titanium, by both pyrometallurgical and hydrometallurgical routes in some instances. The environmental profile included greenhouse and acid rain gas emissions, solid waste emissions and gross energy consumption. The results for various metals are compared in this paper. New process technologies for primary metal production can be expected to reduce the environmental impacts of metal production, and estimates of likely reductions for technologies involving stainless steel, titanium and aluminium are also presented in this paper.     

Resource consumption and emissions from olive oil production: a life cycle inventory case study in Cyprus

“Cradle to gate” life cycle analysis (LCA) has been used to evaluate the consumption of raw materials and emissions of pollutants from olive oil production in Lythrodontas region in Cyprus, in order to identify the processes which give rise to the most significant environmental burdens. The system investigated includes the production of the chemical inputs used (fertilisers and pesticides), agricultural processes, the industrial processing and the transportation and waste management associated with olive oil production. Raw material and energy use as well as emissions were quantified on the basis of a functional unit of 1 l of extra virgin olive oil. The production of the inorganic fertilisers used in the agricultural stage of olive oil production and the disposal of liquid effluent from olive mills to evaporation ponds were found to be “hot-spot” processes not only in terms of resource consumption but also in terms of emissions into the environment.     

Assessment of the environmental impact of carnivorous finfish production systems using life cycle assessment

When evaluating the environmental impacts of finfish production systems, both regional impacts (e.g., eutrophication) and global impacts (e.g., climate change) should be taken into account. The life cycle assessment (LCA) method is well suited for this purpose. Three fish farms that represent contrasting intensive production systems were investigated using LCA: rainbow trout (Oncorhynchus mykiss) in freshwater raceways in France, sea-bass (Dicentrarchus labrax) in sea cages in Greece, and turbot (Scophtalmus maximus) in an inland re-circulating system close to the seashore in France. Two main characteristics differentiated the three farm systems: feed use and energy use. Emission of nitrogen and phosphorus accounted for more than 90% of each farm's potential eutrophication impact. In the trout and sea-bass systems, feed production was the major contributor to potential climate change and acidification impacts and net primary production use (NPPU). In these systems, the main source of variation for environmental impacts was the feed conversion ratio. Results from this study indicate that the sea-bass cage system was less efficient than the trout raceway system, with a higher level of potential eutrophication (65% greater) and NPPU (15% greater). The turbot re-circulating system was a high energy-consumer compared to the trout raceway system (four times higher) and the sea-bass cage system (five times higher). Potential climate change and acidification impacts were largely influenced by energy consumption in the turbot re-circulating system. In the turbot re-circulating system 86% of energy use was due to on-site consumption, while in the sea-bass cage farming system 72% of energy use was due to feed production. These results are discussed in relation to regional contexts of production and focus attention on the sensitivity of each aquatic environment and the use of energy carriers.     

Inorganic arsenic: A non-genotoxic carcinogen

Inorganic arsenic induces a variety of toxicities including cancer. The mode of action for cancer and non-cancer effects involves the metabolic generation of trivalent arsenicals and their reaction with sulfhydryl groups within critical proteins in various cell types which leads to the biological response. In epithelial cells, the response is cell death with consequent regenerative proliferation. If this continues for a long period of time, it can result in an increased risk of cancer. Arsenicals do not react with DNA. There is evidence for indirect genotoxicity in various in vitro and in vivo systems, but these involve exposures at cytotoxic concentrations and are not the basis for cancer development. The resulting markers of genotoxicity could readily be due to the cytotoxicity rather than an effect on the DNA itself. Evidence for genotoxicity in humans has involved detection of chromosomal aberrations, sister chromatid exchanges in lymphocytes and micronucleus formation in lymphocytes, buccal mucosal cells, and exfoliated urothelial cells in the urine. Numerous difficulties have been identified in the interpretation of such results, including inadequate assessment of exposure to arsenic, measurement of micronuclei, and potential confounding factors such as tobacco exposure, folate deficiency, and others. Overall, the data strongly supports a non-linear dose response for the effects of inorganic arsenic. In various in vitro and in vivo models and in human epidemiology studies there appears to be a threshold for biological responses, including cancer.