Recycling thin film transistor liquid crystal display (TFT-LCD) waste glass produced as glass–ceramics

The waste electrical and electronic equipment (WEEE) directives are designed to deal with the rapidly increasing waste stream comprised of electrical and electronic equipment. Recycling electrical and electronic equipment reduces the quantity of waste going to final disposal. The demand for thin film transistor liquid crystal display (TFT-LCD) panels, commonly used in everyday electronic products, is increasing. Conventionally adopted treatments of TFT-LCD waste glass cannot meet WEEE directives. This study adopts the following operating conditions in fabricating glass–ceramics: sintering temperature of 800–950 °C; sintering time of 6 h; and, temperature increase rate of 5 °C/min. The glass–ceramic samples then underwent a series of tests, including the Vickers hardness, water absorption and porosity tests, to determine product quality. The Vickers hardness was 12.1 GPa when fired at 900 °C for 6 h, and density was 2.4 g/cm³ and water absorption was 0%. Thus, TFT-LCD waste glass can be regarded as a good glass–ceramic material.     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Reduction of hexavalent chromium by polypyrrole-modified steel mesh electrode

Adherent polypyrrole (ppy) films were electropolymerized from a para-toluenesulfonic sodium (PTS) solution on stainless steel mesh (SSM). Reduced ppy-modified SSM electrode can transfer Cr(VI) to Cr(III) effectively. Lower pH (<2) or higher temperature (>35 °C) is beneficial for the removal of Cr(VI). Electro-reduction achieved 90% removal efficiency after 21 min by cyclic voltammetry. The removal efficiency is 96–56% for one–six contact cycles between ppy and Cr(VI). SEM shows that ppy films on SSM have regular morphology with small nucleus of less than 1 μm in diameter.     

Market-based approaches and tools for improving water and air quality

Nitrogen (N) losses from agriculture are negatively impacting groundwater, air, and surface water quality. National, state, and local policies and procedures that can mitigate these problems are needed. Market-based approaches where waste treatment plants (point sources) can purchase nutrient credits from upstream agricultural operations (non-point sources) to meet their National Pollutant Discharge Elimination System permit requirements within the Clean Water Act are being explored. This paper reviews these market-based approaches for enhancing air and water quality at a lower cost than simple command-and-control regulation, and describes new tools that are being developed, such as Nitrogen Trading Tool (NTT), that can be used to assess nitrogen losses to the environment under different management scenarios. The USDA-NRCS, EPA and several other state and local agencies are interested in these new tools. The NTT, though primarily designed for water quality markets, also estimates savings in nitrous oxide (N₂O) emissions that can be traded in carbon markets. For example, an analysis using NTT shows that for 100 ha of crop land, a C sequestration equivalent of approximately 25–38 Mg C y^?1 for a farm in Ohio, and 13–21 Mg C y^?1 for a farm in Virginia could be achieved with better nitrogen management practices. These numbers across a watershed could be much larger with improved N and conservation management practices that contribute to better water quality and lower global warming potential. There is a need to further develop, calibrate, and validate these tools to facilitate nitrogen and carbon trading future markets around the globe to increase environmental conservation across agro-ecosystems worldwide.     

Simulation of retention and transport of copper,lead and zinc in a paddy soil of the Red River Delta,Vietnam

Heavy metal (HM) contaminations in the topsoil around handicraft villages with non-ferrous heavy metal recycling in the Red River Delta can impose serious threats to the subsoil as well as to the groundwater quality. This feature is very important for paddy soils due to relatively high leaching rates and the dissolution of Fe–Mn oxides under reducing conditions which can accelerate the amount of HM translocated to the subsoil and groundwater.The transport of Cu, Pb and Zn in paddy soils was simulated by numerical modeling of non-equilibrium solute transport with an adaptation of the Hydrus-1D model. For the simulation, a water layer on the soil surface was included, from which HM can infiltrate into the soil depending on the soil hydraulic properties. Sorption coefficients, obtained from batch experiments were used as input data for the simulations. Calculated leaching rates were compared with the binding forms of HM in the samples.The simulations show that leaching rates decrease in the order: Zn > Cu > Pb. This order is confirmed by the results of sequential extractions. Under constant flooded conditions at a water table of 20 cm, Cu, Pb and Zn were estimated to reach the soil depth of 1 m within 470, 495 and 370 days, respectively, emphasizing that reactive pollutants can reach groundwater in a relatively short time. A change of the water layer from 1 to 30 cm can accelerate the leaching rate of HM up to 36%. The hard pan layer was observed to induce a hysteresis in hydraulic conductivity and slow down the movement of HM. Uncertainties in modeling arise as several parameters in the simulation can be determined only with significant errors. However, Hydrus-1D is a suitable tool for simulation of the transport of HM in paddy soils.     

Economic evaluation of optional recycling processes for waste electronic home appliances

This paper presents an economic evaluation of three typical recycling processes for the five main types of waste electronic home appliances (EHA) (TV set, refrigerator, washing machine, air conditioner and personal computer) in Beijing, the capital of China. The main purpose is to identify the formal management framework with economic feasibility for the waste EHA generated in large municipalities of China. It is found that the advanced technologies, which have mechanical processing units, should be introduced to recover more valuable materials from the waste appliances. Net revenues with a range of 90–240 RMB (Chinese currency unit, 1.0 USD ≈ 8.0 RMB) per unit, depend on the type of appliance, could be expected in case of using the most complicated procedures which can separate both metals and plastics from the shredded mixtures. However, the recycling of waste refrigerator and waste washing machine will, respectively, spend about 100 and 6 RMB per unit if solely by simple manual dismantling. Revenues from recycling of the other three types of appliances are positive but quite low in this case. Although positive revenues could be achieved from the isolated evaluation of recycling, the entire management system, which also covers the phases of collection and transportation, is economically infeasible if the waste appliances are bought from the households still at current prices. Based on a survey of the householder's attitude to the cost for waste EHA management, which was conducted earlier, the practical way to construct a formal management system for waste EHA in Beijing is to reduce the citizen's traditional expectation to the values of waste appliances and encourage their transfer to the formal collection system at lower prices.     

The basis of a policy for minimizing and recycling food waste

The life cycle of basic food items was studied in order to discover the reasons for low landfill diversion rates of this material. Management failures at key points of the cycle were identified. Subjects of study were commercialization procedures of fruit and vegetables before consumption, consumption proper and after-consumption disposal procedures for food scraps in the Brazilian context. Before consumption, the rate of lost fruit and vegetables stood at 16 wt.% of the total quantity commercialized. During consumption by residents, the waste rate of food amounted to 9 wt.% of all collected household garbage. In the after-consumption sector of the cycle, biodegradables represented 72 wt.% of all household garbage collected by official means in a typical Brazilian town. The numbers produced clearly identified landfill diversion of biodegradables as a management problem. The authors experimented with original proactive administrative procedures designed to set landfill diversion targets. The occurrence of wasted fruit and vegetables at the wholesaler and retailer levels was identified. Remedies were proposed and tested to reduce this waste by at least 50%. In the after-consumption sector, the notion of divided garbage collection was developed and applied to test communities. It was shown that biodegradables may be collected separately from the rest of household waste. This resulted in a diversion potential of 100% for biodegradables alone and 77 wt.% for all collected household waste. The study produced a formal policy proposal to municipal administrations to avoid the need for tipping of biodegradable material.     

Copper and zinc recycling in Australia: potential quantities and policy options

This paper presents relevant data for industry and governmental policy makers with the aim of increasing the recycling rate of end-of-life copper and zinc in Australia in a technically and economically feasible way. The methodology used to quantify and spatially distribute end-of-life flows of copper and zinc is based on existing and anticipated in-use stocks, their residence times, and their historical and anticipated future evolution. Australia currently (ca. 2000) generates about 72 Gg/year and 57 Gg/year of end-of-life copper and zinc, respectively. Some 70% of all discarded copper and 40% of all discarded zinc generated in Australia are currently being recycled. A detailed assessment shows that about 75% of all end-of-life material in Australia comes from the three states New South Wales, Victoria, and Queensland. In Australia, about 70–75% of waste copper and waste zinc is generated in urban areas. Residential applications account for about 40% (copper) and 60% (zinc) of the generated discards; commercial and industrial applications account for the remainder. By 2030, the discard flows are predicted to increase by about 105% and 155%, to 150 Gg Cu/year and 145 Gg Zn/year, providing substantially increased opportunities for recovery and re-use. Priority targets for the improvement of copper and zinc recycling in Australia are buildings under renovation, urban infrastructure, the transportation sector, and also consumer and business durables. Urban centres are particularly attractive locations for recycling facilities, especially in Perth and Adelaide.     

Micro-flood (MF) technology for sustainable manufacturing operations that are coolant less and occupationally friendly

This paper presents a new technology for minimizing the use of metalworking fluids (MWFs) during the machining process that is atomization-less and occupational friendly. Micro-flood (MF) technology utilizes direct contact between the cutting tool and the MWF without the interaction of a gas medium. Experiments were conducted in high volume mass production environment turning HSLA (high strength low alloy) SAE 070Y steel. Machining performance and total air mass particulates were investigated in dry machining, Near dry machining (NDM) via atomized spray mist and MF technology. Open-atmosphere air monitoring indicated that total mass particulates behaved in an almost linear fashion with respect to gas atomization pressure, whereas the MWF flow rate demonstrated logarithmic trends in NDM applications using an atomized spray. Nozzle orientations directed upward into the air also produced higher mg/m³ concentrations (such as flank) than chip and rake face orientations that were directed down. Greater separation existed at higher gas atomization pressures, MWF flow rates and by changing the MWF type. At extreme limits, nozzle orientation affected mg/m³ concentration as much as 4–5 mg/m³ for water-miscible MWFs and 15–22 mg/m³ for non-water-miscible MWFs. Tool-life performance varied greatly among MWF type and flow rate, and in all cases MF technology performed better than NDM using an atomized spray mist. Direct and consistent MWF penetration to cutting zone using MF technology lowered tool-wear on the average of 12–75% compared to NDM at the same MWF flow rate. Compared to dry machining, NDM improved tool-wear on the average by 20–243%. In one case, tool-wear performance was improved by 616% at 0.15 mm using MF technology compared to dry machining at a nominal 0.925 mm tool-wear. Overall, a large mass reduction of particulates can be achieved employing MF technology that would have been unrealistic for an open-atmosphere machining environment employing an atomized spray mist. On the average, MF technology can maintain a total air mass particulate of less than 0.4 mg/m³ in the occupational work zone using MWF flow rates up to 1260 ml/h, regardless of the MWF classification. Atomized spray mist applications are capable meeting the 5 mg/m³ OSHA limit if MWF flow rates are less than 160 ml/h, air pressures are less than 0.137 MPa (20 psi) using water-miscible MWFs and air pressures are less than 0.0344 MPa (5 psi) using non-water-miscible MWFs.     

The study of ultrasound-assisted oxidative desulfurization process applied to the utilization of pyrolysis oil from waste tires

In recent years, the increasing world population and rapid industrial development has increased the consumption of fossil fuel-derived oils. In response to the resulting exhaustion of fossil fuel energy, many countries around the world are investigating methods of waste energy recovery and reuse, including oil recovery from the pyrolysis process of waste tires. This study investigates the efficiency of an ultrasound-assisted oxidative desulfurization (UAOD) process in sulfur reduction from diesel oil and the pyrolysis oil from waste tires treatment. The results indicate that the oxidation efficiency increases as the doses of transition metal catalyst are increased. Longer sonication time also enhances the oxidation process, apparently through the biphasic transfer of oxidants, which results in a high yield of organic sulfur oxidation products. The best desulfurization efficiency was 99.7% (2.67 ppm sulfur remaining) and 89% (800 ppm sulfur remaining) for diesel and pyrolysis oils, respectively, via a process executed by two UAOD units connected in series and combined with solid adsorption using 30 g of Al₂O₃ in 6 cm columns. These batch experiment results demonstrate clean waste energy recovery and utilization, while fulfilling the requirements of Taiwan EPA environmental regulations (sulfur concentrations less than 5000 ppm).     

Assessing the recycling potential of glass fibre reinforced plastic waste in concrete and cement composites

At present glass fibre reinforced plastic (GRP) waste recycling worldwide is very limited due to its intrinsic thermoset properties, lack of characterisation data and non availability of viable recycling and recovery routes. In the present study, efforts were made to recycle GRP waste powder and fibre in concrete and cement composites and assess its quality to comply with the British standards for use in construction applications. Results revealed that the mean compressive strength of concrete composites using 5%–50% GRP waste powder under water curing varied from 37 N/mm² to 19 N/mm². Increase in the concentration of GRP waste decreased the compressive strength. However, increase in curing duration (14–180 days) resulted in improving the compressive strength of concrete with 5% GRP application to 45.75 N/mm². Moreover, the density of concrete with 50% GRP waste was reduced by about 12% as compared to the control sample. The bending strength in terms of modules of rupture (MOR) of 12 mm thickness cement composites developed using 5% GRP waste fibre attained 16.5 N/mm². The findings of this work pave the way for further GRP waste recycling in precast construction products for use in various applications.     

Bird use of rice field strips of varying width in the Kanto Plain of central Japan

Bird communities in flooded rice strips of different widths were surveyed in 71 fields around Lake Kasumigaura, on the Kanto Plain (central Japan). Strips categorized into four width classes (<50, 50–100, 100–300 and >300 m) and two locations (core >100 and <100 m from edges) were censused from May to July 1998, and mean species number and density of birds were compared. Both density and mean species differed significantly between classes, strips >300 m wide favoring bird diversity and number of marsh and grassland species. Breeding skylarks and fan-tailed warblers hardly occurred in fields adjacent to edges. Strips <50 m wide were not suitable feeding site of egret species (Ardeidae), but supported diurnal activity of black-crowned night herons and species requiring both rice fields and adjacent environment. As a consequence, bird conservation in rice field strips needs to consider both their width and location within the environment.     

Emissions of N2O and NH3, and nitrogen leaching from direct seeded rice under different tillage practices in central China

Tillage practices affect the fate of fertilizer nitrogen (N) through influencing transformations of N, but few studies have examined N₂O and NH₃ emissions, and N leaching from different rice tillage systems. Thus the objective of this study was to assess N₂O emission, NH₃ volatilization and N leaching from direct seeded rice in conventional tillage (CT) and no-tillage (NT) production systems in the subtropical region of China during the 2008 and 2009 rice growing seasons. Treatments were established following a split-plot design of a randomized complete block with tillage practices as the main plot and N fertilizer level as the sub-plot treatment, and there were four treatments: NT + no fertilizer (NT0), CT + no fertilizer (CT0), NT + compound fertilizer (NTC) and CT + compound fertilizer (CTC), respectively. Results showed that N fertilization significantly increased (p < 0.01) N₂O emissions, NH₃ volatilization and N leaching from rice fields in both years. In general, there was no significant difference in N₂O emissions and NH₃ volatilization between NT0 and CT0 in both years, while NTC had significantly higher (p < 0.05) N₂O emissions and NH₃ volatilization compared to CTC. Over the two rice growing seasons, NTC showed 32% and 47% higher N₂O emissions, and 29% and 52% higher NH₃ losses than CTC. Higher (p < 0.05) N₂O emissions from NTC than CTC were presumably due to higher soil organic C and greater denitrification. Total N and NO₃^? concentrations were higher (p < 0.05) in CTC than NTC, but larger volumes of percolation water in NTC than CTC resulted in no significant difference in leakage of total N and NO₃^?. Hence, application of N fertilizer in combination with NT appeared to be ineffective in reducing N losses from N fertilizer in paddy fields.     

Comparison of soil N availability and leaching potential,crop yields and weeds in organic,low-input and conventional farming systems in northern California

Increasing dependence on off-farm inputs including, fertilizers, pesticides and energy for food and fiber production in the United States and elsewhere is of questionable sustainability resulting in environmental degradation and human health risks. The organic (no synthetic fertilizer or pesticide use), and low-input (reduced amount of synthetic fertilizer and pesticide use), farming systems are considered to be an alternative to conventional farming systems, to enhance agricultural sustainability and environmental quality. Soil N availability and leaching potential, crop yields and weeds are important factors related to agricultural sustainability and environmental quality, yet information on long-term farming system effects on these factors, especially in the organic and low-input farming systems is limited. Four farming systems: organic, low-input, conventional (synthetic fertilizer and pesticides applied at recommended rates) 4-year rotation (conv-4) and a conventional 2-year rotation (conv-2) were evaluated for soil mineral N, potentially mineralizable N (PMN), crop yields and weed biomass in irrigated processing tomatoes (Lycopersicon esculentum L.) and corn (Zea mays L.) from 1994 to 1998 in California’s Sacramento Valley. Soil mineral N levels during the cropping season varied by crop, farming system, and the amount and source of N fertilization. The organic and low-input systems showed 112 and 36% greater PMN pools than the conventional systems, respectively. However, N mineralization rates of the conventional systems were 100% greater than in the organic and 28% greater than in the low-input system. Average tomato fruit yield for the 5-year period (1994–1998) was 71.0 Mg ha⁻¹ and average corn grain yield was 11.6 Mg ha⁻¹ and both were not significantly different among farming systems. The organic system had a greater aboveground weed biomass at harvest compared to other systems. The lower potential risk of N leaching from lower N mineralization rates in the organic and low-input farming systems appear to improve agricultural sustainability and environmental quality while maintaining similar crop yields.     

Effects of irrigation,fertilization and crop straw management on nitrous oxide and nitric oxide emissions from a wheat–maize rotation field in northern China

One-year winter wheat–summer maize rotation is the most popular double cropping system in north-central China, and this highly productive system is an important source of nitrous oxide (N₂O) and nitric oxide (NO) emissions due to the high fertilizer N and irrigation water inputs. To sustain the high crop production and mitigate the detrimental impacts of N₂O and NO emissions, improved management practices are extensively applied. The aim of this study is therefore to evaluate the effects of an improved management practice of irrigation, fertilization and crop straw on grain yield and N₂O and NO emissions for a wheat–maize rotation field in northern China. Using automated and manual chamber measuring systems, we monitored N₂O and NO fluxes for the conventional (CT, 2007–2008), improved (IT, 2007–2008), straw-amended (WS, 2008–2009), straw-not-amended (NS, 2008–2009), and no N-fertilizer treatments (WS–NN, 2008–2009), respectively, for one rotation-year. The grain yields were determined for CT and IT for three rotation-years (2005–2008) and for WS, NS and WS–NN for one rotation-year (2008–2009). The improved management of irrigation and fertilization reduced the annual N fertilization rate and irrigation amount by 17% and 30%, respectively; increased the maize yield by 7–14%; and significantly decreased the N₂O and NO emissions by 7% (p < 0.05) and 29% (p < 0.01), respectively. The incorporation of wheat straw increased the cumulative N₂O and NO emissions in the following maize season by 58% (p < 0.01) and 13%, respectively, whereas the effects of maize straw application were not remarkable. The N₂O and NO emission factors of applied N were 2.32 ± 2.32% and 0.42 ± 1.69% for wheat straw and 0.67 ± 0.23% and 0.54 ± 0.15% for chemical N-fertilizers, respectively. Compared to conventional management practices using high application rates of irrigation water and chemical N-fertilizer as well as the field burning of crop straw, the improved management strategy presented here has obvious environmentally positive effects on grain yield and mitigation of N₂O and NO emissions.     

Life cycle assessment of sub-units composing a MSW management system

This paper summarises the results of a number of life cycle evaluations that we have carried out in recent years about some of the sub-units (in particular, the recycling of the packaging materials, the treatment of the bio-waste, and the energy recovery from the residual waste) that compose a municipal solid waste management system (MSWMS) and about the MSWMS as a whole.The range of values estimated for cumulative energy demand (CED), global warming (GWP₁₀₀), human toxicity, acidification, and photochemical ozone creation indicators according to the different analyses are presented in the paper for each sub-unit. The assumptions influencing the results have been identified, too. The proper aggregation of sub-units has allowed the estimation of the impacts associated with two integrated MSWMSs implemented in Italy and of the order of magnitude of those associated with a generic MSWMS, similar to those of the two case studies.The results show that the assumptions that most influence the environmental indicators are those about selection efficiencies and quality deterioration in the recycling of the packaging materials, about process emissions and avoided products in the composting, about the biogas yield and its way of utilisation in the anaerobic digestion, and about the efficiency of the plant and the kind of avoided energy in the energy recovery. All the indicators, except GWP₁₀₀ under certain assumptions, are negative in sign, thus indicating a benefit for the environment thanks to the avoided impact associated with the production of material and energy during the waste management. The estimated order of magnitude of the CED and GWP₁₀₀ indicators turns out to be respectively thousands of MJ eq. and tens of kg CO₂ eq. per tonne of managed waste.     

Soil-profile organic carbon and total nitrogen during 12 years of pasture management in the Southern Piedmont USA

Soil organic C (SOC) and total soil N (TSN) sequestration estimates are needed to improve our understanding of management influences on soil fertility and terrestrial C cycling related to greenhouse gas emission. We evaluated the factorial combination of nutrient source (inorganic, mixed inorganic and organic, and organic as broiler litter) and forage utilization (unharvested, low and high cattle grazing pressure, and hayed monthly) on soil-profile distribution (0–150 cm) of SOC and TSN during 12 years of pasture management on a Typic Kanhapludult (Acrisol) in Georgia, USA. Nutrient source rarely affected SOC and TSN in the soil profile, despite addition of 73.6 Mg ha^?1 (dry weight) of broiler litter during 12 years of treatment. At the end of 12 years, contents of SOC and TSN at a depth of 0–90 cm under haying were only 82 ± 5% (mean ± S.D. among treatments) of those under grazed management. Within grazed pastures, contents of SOC and TSN at a depth of 0–90 cm were greatest within 5 m of shade and water sources and only 83 ± 7% of maximum at a distance of 30 m and 92 ± 14% of maximum at a distance of 80 m, suggesting a zone of enrichment within pastures due to animal behavior. During 12 years, the annual rate of change in SOC (0–90 cm) followed the order: low grazing pressure (1.17 Mg C ha^?1 year^?1) > unharvested (0.64 Mg C ha^?1 year^?1) = high grazing pressure (0.51 Mg C ha^?1 year^?1) > hayed (?0.22 Mg C ha^?1 year^?1). This study demonstrated that surface accumulation of SOC and TSN occurred, but that increased variability and loss of SOC with depth reduced the significance of surface effects.     

Comparison of absorption rates and absorption capacity of ammonia solvents with MEA and MDEA aqueous blends for CO2 capture

In this work we present the experimental results of absorption rates and absorption capacity for the CO₂ absorption by ammonia (NH₃) aqueous solutions. Experiments are carried out in a thermoregulated Lewis-type cell reactor and are achieved in temperature and concentration ranges of 278–303 K and 2–5wt.% NH₃ respectively. The obtained values for absorption kinetic rates and absorption capacity are compared with those available for alkanolamine solvents, commonly used to absorb CO₂. In order to achieve this comparison, data available in studies about alkanolamine solvents at 303–333 K and 5–50wt.% for alkanolamines solutions were considered. Results show that CO₂ absorption by NH₃ is faster than the one carried out by MDEA, except for 2wt.% NH₃ at 288 K. At 278 K and using aqueous solutions of 3wt.% NH₃, the absorption rate is almost identical to the one reached with MDEA solvent. The highest absorption capacity, also compared with alkanolamine solution, is reached with aqueous solutions of 5wt.% NH₃ at 278 K and 303 K.     

Carbon stocks in Swiss agricultural soils predicted by land-use,soil characteristics,and altitude

Effects of agricultural land-use and land-use change on soil organic carbon (SOC) pools play an important role in the mitigation of the global greenhouse effect. To estimate these effects, baseline SOC data for individual regions or countries are needed. The aim of this study was to quantify current SOC stocks in Swiss agricultural soils, to identify meaningful predictors for SOC, and to estimate historical SOC losses. SOC stocks in mineral soils were estimated from combined georeferenced data for land-use, topography, and profile data (n=544) from soil surveys. Mean SOC density in the layer 0–20 cm ranged between 40.6±8.9 t ha⁻¹ (±95% confidence interval (CI)) for arable land and 50.7±12.2 t ha⁻¹ for favourable permanent grassland, and in the layer 0–100 cm from 62.9±15.2 t ha⁻¹ for unfavourable grassland to 117.4±29.8 t ha⁻¹ for temporary grasslands (leys). SOC stocks in organic soils were quantified separately for intact and cultivated peatlands using data from peatland inventories and current SOC densities calculated from average peat decay rates. Organic soils account for less than 3% of the total area but store about 28% (47.2±7.3 Mt) of the total SOC stock of 170±17 Mt. Land-use type, clay content, and altitude (serving as a climate proxy for grassland soils at higher altitudes) were identified as main SOC predictors in mineral soils. Clay content explained up to 44% of the variability in SOC concentrations in the fine earth of arable soils, but was not significantly related to SOC in grassland soils at higher altitudes. SOC concentration under permanent grassland increases linearly with altitude, but because soil depth and stone content limit carbon storage in alpine grassland soils, no relationship was found between altitude and SOC stock. A preliminary estimate suggested that about 16% of the national SOC stock has been lost historically due to peatland cultivation, urbanisation, and deforestation. It seems unlikely that future changes in agricultural practices could compensate for this historical SOC loss in Swiss agricultural soils.     

CaCO3 production using liquid waste from Solvay method

Process of obtaining CaCO₃ from the waste post-distillation liquid DS and post-filtration liquid from Solvay method of the soda production at 303 K was investigated. Reagents were dosed in a stoichiometric ratio without dilution, for different concentrations of the DS and post-filtration liquids. The dosage time was varied in the range 2–30 min, the reagent stirring rate was 500 rpm. For the obtained samples of CaCO₃, the bulk and packing densities, water, paraffin oil and dibutyl phthalate absorption capacities, distribution of the particle size as well as the crystalline form were determined.